Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revisionBoth sides next revision
toh:snr:cpe-me2-lite [2024/12/11 14:24] – [Installation] wertwert4pdatoh:snr:cpe-me2-lite [2024/12/11 14:29] – [OEM easy installation] wertwert4pda
Line 103: Line 103:
  
 <WRAP BOX> <WRAP BOX>
-FIXME //The instructions below are for Broadcom devices and only serve as an example.//\\ 
 **//Remove / modify them if they do not apply to this particular device!//** **//Remove / modify them if they do not apply to this particular device!//**
  
Line 111: Line 110:
  
 **Note:** Reset router to factory defaults if it has been previously configured. **Note:** Reset router to factory defaults if it has been previously configured.
-  Browse to ''<nowiki>http://192.168.1.1/Upgrade.asp</nowiki>'' + 
-  Upload .bin file to router +**Flash instruction via WEB (old factory firmware 1.10.*)*
-  Wait for it to reboot +    1Boot SNR-CPE-ME2-Lite normally with "Router" mode 
-  * Telnet to 192.168.1.1 and set a root password, or browse to ''<nowiki>http://192.168.1.1</nowiki>'' if LuCI is installed.+    2Access to "http://192.168.1.1/" and open "Administration -Management" page 
 +    3Select the OpenWrt sysupgrade image in "Firmware update" section and click "Update" button 
 +    4. Wait ~120 seconds to complete flashing 
 + 
 +Note: For new factory firmware (EasyWRT) need downgrade to old factory image first.    
 +   
 </WRAP> </WRAP>
  
  • Last modified: 2024/12/18 15:02
  • by frollic