Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revisionBoth sides next revision
toh:sim:simax1800t [2023/01/31 09:12] – Created from the form at meta:create_new_device_page dragonblueptoh:sim:simax1800t [2024/12/13 09:45] – [Specific Configuration] frollic
Line 1: Line 1:
-====== SIM SIMAX1800T ======+====== HAR-20S2U1 / SIMAX1800T / EDUP AX1800 ======
  
 /* This template is intended to be used via https://openwrt.org/meta/create_new_device_page ONLY.  */ /* This template is intended to be used via https://openwrt.org/meta/create_new_device_page ONLY.  */
Line 5: Line 5:
 /* USE https://openwrt.org/meta/create_new_device_page */ /* USE https://openwrt.org/meta/create_new_device_page */
  
-{{page>meta:infobox:construction&noheader&nofooter&noeditbtn}}+<WRAP center round important 60%> 
 +**This Device have multiple brand, but come from the same OEM, OEM may minor change hardware in the future**
  
-//Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.//+**Haier HAR-20S2U1 = EDUP EP-RT2960 AX1800 = fenvi AX1800 = SIM SIMAX1800T (but different casing)**
  
-<WRAP BOX> +**EDUP users, see the warning in the [[:toh:sim:simax1800t#flash_layout|Flash layout]] section**
-FIXME Any text with a light background (like this one) provides instructions for creating the Details Page. When you have filled in correct/useful information (instead of any template that's there) **remove the instructions, as well as the ''<nowiki><WRAP></nowiki>'' that encloses it.**+
 </WRAP> </WRAP>
  
Line 17: Line 17:
 /*****/ /*****/
  
-{{media:example:genericrouter1.png?200|Generic Router}} +{{media:oem-ax1800.png?200|Generic Router}}
- +
-<WRAP BOX> +
-FIXME +
-===== Getting started with a new Device Page ===== +
-  - This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that **you have to fill it with life and information.** +
-  - There are several "fixme" tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness. +
-  - When there are no more "fixme" tags left, delete this one too, along with the ''<nowiki><WRAP></nowiki>'' that encloses it. +
- +
-===== Keep the articles modular ===== +
-  * Please include only model specific information, omit bla,bla and put everything generic into separate articles +
-  * If you have no time to write certain stuff, link to [[docs:start]] +
-  * [[docs:guide-user:base-system:start]] should lead the way, do not explain this again +
-  * DO NOT provide a complete howto here! Instead //groom// the [[docs:start|general documentation]]. +
-</WRAP>+
  
 +**Forum link** https://forum.openwrt.org/t/edup-ep-rt2960-ax1800-strange-openwrt-router/198933
 ===== Supported Versions ===== ===== Supported Versions =====
 +<!-- ToH: {
 +  "source": "json",
 +  "dom": "t",
 +  "paging": false,
 +  "rotate": true,
 +  "shownColumns": ["brand", "model", "version", "supportedcurrentrel", "oemdevicehomepageurl", "forumsearch", "deviceid"],
 +  "filterColumns": {"brand": "^Haier$", "model": "^HAR-20S2U1$|^SIMAX1800T$"}
 +} -->
  
-<WRAP BOX> 
-FIXME 
-  - The tables below are automatically generated, **once the correct filters for Brand and Model are set.** 
-  - If the tables below show information for ''<nowiki>SIM SIMAX1800T </nowiki>'', everything is OK and you can delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-  - If the tables below contain "Nothing found", it means that either 
-    - the dataentry page for SIM SIMAX1800T  is missing. Please [[meta:create_new_dataentry_page|create a new dataentry page]] first, then reload this page. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-    - filters are not set correctly. Most common reason for "Nothing found": The dataentry does not contain a Version, but we are filtering here for version -> Please **edit this section and adjust the filters with the proper Brand, Model and Version.** In case the dataentry does not contain a version, delete the line ''filter  : Versions~''. Just try, it's easy. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-  - If the tables still contain "Nothing found": Don't panic, calm down, take a deep breath and [[:contact|contact a wiki admin]] (tmomas) for help. 
-</WRAP> 
- 
----- datatable ---- 
-cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, Forum Search_search-forums, Device Techdata_pageid 
-headers : Brand, Model, Version, Current Release, OEM Info, Forum Search, Technical Data 
-align   : c,c,c,c,c,c,c 
-filter  : Brand=SIM 
-filter  : Model=SIMAX1800T 
-filter  : Versions~ 
----- 
- 
-/* If no unsupported functions known, comment out the following datatable or delete it. */ 
----- datatable ---- 
-cols    : Unsupported Functions_unsupporteds 
-filter  : Brand=SIM 
-filter  : Model=SIMAX1800T 
-filter  : Versions~ 
----- 
- 
-===== Experimental Versions ===== 
- 
-/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *  
-   The official Table of Hardware only lists current, stable versions of OpenWrt.  * 
-   Use this space to describe any on-going efforts to create a newer version       * 
-   of the firmware for this device. Provide links to firmware images,              * 
-   active threads on the forum, or other sources of information.                   * 
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ 
- 
-//None at this time.// 
  
 ===== Hardware Highlights ===== ===== Hardware Highlights =====
----- datatable ---- +<!-- ToH: { 
-cols    ModelVersionsCPUCPU MHzCPU Cores_numcores, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4GHz, WLAN 5.0GHz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_ +  "source""json", 
-header  : ModelVersion,SoC,CPU MHz,CPU Cores,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB +  "dom": "t", 
-align   : c,c,c,c,c,c,c,c,c,c,c,c,c +  "paging": false, 
-filter  : Brand=SIM +  "rotate": true
-filter  Model=SIMAX1800T +  "shownColumns"["model""version""cpu""cpumhz""cpucores""flashmb""rammb""wlanhardware""wlan24ghz""wlan50ghz""ethernet100mports""ethernet1gports""modem""usbports"]
-filter  : Versions~ +  "filterColumns"{"brand""^Haier$", "model": "^HAR-20S2U1$|^SIMAX1800T$"} 
-----+-->
  
  
 ===== Installation ===== ===== Installation =====
 /* stable release */ /* stable release */
-/* uncomment once stable release is available 
----- datatable ---- 
-cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url 
-headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock 
-align   : c,c,c 
-filter  : Brand=SIM 
-filter  : Model=SIMAX1800T 
-filter  : Versions~ 
----- 
-*/ 
  
- +<!-- ToH: { 
-/* snapshot */ +  "source""json", 
-/* delete once stable release is available */ +  "dom": "t", 
----- datatable ---- +  "paging": false, 
-cols    ModelVersionsSupported Current RelFirmware OpenWrt snapshot Install URL_url, Firmware OpenWrt snapshot Upgrade URL_urlFirmware OEM Stock URL_url +  "rotate": true
-headers ModelVersionCurrent ReleaseFirmware OpenWrt snapshot InstallFirmware OpenWrt snapshot UpgradeFirmware OEM Stock +  "shownColumns"["model""version""supportedcurrentrel""firmwareopenwrtinstallurl""firmwareopenwrtupgradeurl""firmwareoemstockurl"]
-align   : c,c,c +  "filterColumns"{"brand": "^SIM$", "model""^SIMAX1800T$", "version""^$"} 
-filter  : Brand=SIM +-->
-filter  Model=SIMAX1800T +
-filter  Versions~ +
-----+
  
  
 -> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]] -> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]]
  
-FIXME Please add the installation procedure here.+**TFTP Installation (initramfs image only & recommend):** 
 +<code> 
 +1. Set local tftp server IP: 192.168.1.254 and NetMask: 255.255.255.0 
 +2. Rename initramfs-kernel.bin to "factory.bin" and put it in the root 
 +   directory of the tftp server. (tftpd64 is a good choice for Windows) 
 +3. Start the TFTP server, plug in the power supply, and wait for the 
 +   system to boot. 
 +4. Backup "firmware" partition and rename it to "firmware.bin", we need 
 +   it to back to stock firmware. 
 +5. Erase firmware partition. 
 +   # mtd erase firmware 
 +6. Apply sysupgrade.bin in OpenWrt LuCI or with sysupgrade command. 
 +</code>
  
-==== Flash Layout ==== +**Web UI Installation:** 
-<WRAP BOX+<code
-FIXME //[[:docs:techref:flash.layout#discovery_how_to_find_out|Find out flash layout]], then add the flash layout table here (copy, paste, modify the [[docs:techref:flash.layout#partitioning_of_the_flash|example]]).//+1Apply update by uploading initramfs-factory.bin to the web UI. 
 +2. Erase firmware partition. 
 +   mtd erase firmware 
 +3Apply squashfs-sysupgrade.bin in OpenWrt LuCI. 
 +</code>
  
-Please check out the article [[docs:techref:flash.layout|Flash layout]]It contains examples and explanations that describe how to document the flash layout+**Recovery to stock firmware:** 
-</WRAP>+<code> 
 +a. Upload "firmware.bin" to OpenWrt /tmp, then execute: 
 +   # mtd -r write /tmp/firmware.bin firmware 
 +bWe can also write factory image "UploadBrush-bin.img" to firmware 
 +   partition to recovery. Upload image file to /tmp, then execute: 
 +   # mtd erase firmware 
 +   # mtd -r write /tmp/UploadBrush-bin.img firmware 
 +Tips: How to extract stock firmware image: 
 +  Download stock firmware, then use openssl: 
 +  openssl aes-256-cbc -d -salt -in [Downloaded_Firmware] -out "firmware.tar.tgz" -k QiLunSmartWL 
 +</code>
  
-==== OEM easy installation ==== +==== Flash Layout ==== 
- +:!: EDUP version has two flash firmware partitions (firmware and firmware2) these are different size to the other models and cause problemsDeleting them and creating partitions of the right size was required after uploading images of the wrong size.
-<WRAP BOX> +
-FIXME //The instructions below are for Broadcom devices and only serve as an example.//\\ +
-**//Remove / modify them if they do not apply to this particular device!//** +
- +
-This section deals with +
-  * How you install OpenWrt from a device freshly opened +
-  * The steps required such as reset to factory defaults if the device has already been configured +
- +
-**Note:** Reset router to factory defaults if it has been previously configured. +
-  * Browse to ''<nowiki>http://192.168.1.1/Upgrade.asp</nowiki>'' +
-  * Upload .bin file to router +
-  * Wait for it to reboot +
-  * Telnet to 192.168.1.1 and set root password, or browse to ''<nowiki>http://192.168.1.1</nowiki>'' if LuCI is installed. +
-</WRAP>+
  
 ==== OEM installation using the TFTP method ==== ==== OEM installation using the TFTP method ====
Line 148: Line 105:
 FIXME Enter values for "FILL-IN" below FIXME Enter values for "FILL-IN" below
  
-^ Bootloader tftp server IPv4 address FILL-IN   | +^ Bootloader tftp server IPv4 address 192.168.1.254   | 
-^ Bootloader MAC address (special)     FILL-IN   |+^ Bootloader MAC address (special)     random   |
 ^ Firmware tftp image                  | [[:downloads|Latest OpenWrt release]] (**''NOTE:''** Name must contain //"tftp"//) | ^ Firmware tftp image                  | [[:downloads|Latest OpenWrt release]] (**''NOTE:''** Name must contain //"tftp"//) |
-^ TFTP transfer window                 FILL-IN seconds                                | +^ TFTP transfer window                 seconds                                | 
-^ TFTP window start                    | approximately FILL-IN seconds after power on   | +^ TFTP window start                    | approximately seconds after power on   | 
-^ TFTP client required IP address      | FILL-IN                                        |+^ TFTP client required IP address      | 192.168.1.36                                       |
  
 </WRAP> </WRAP>
Line 161: Line 118:
  
 <WRAP BOX> <WRAP BOX>
- 
-FIXME These are generic instructions. Update with your router's specifics. 
  
 ==== LuCI Web Upgrade Process ==== ==== LuCI Web Upgrade Process ====
Line 176: Line 131:
  
   * ''sysupgrade''   * ''sysupgrade''
-  * ''mtd'' 
  
 Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing. Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.
Line 188: Line 142:
 wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
 sysupgrade /tmp/xxx.abc sysupgrade /tmp/xxx.abc
-</code> 
- 
-=== mtd === 
- 
-If ''sysupgrade'' does not support this router, use ''mtd''. 
- 
-  * Login as root via SSH on 192.168.1.1, then enter the following commands: 
- 
-<code> 
-cd /tmp 
-wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc 
-mtd write /tmp/xxx.abc linux && reboot 
 </code> </code>
  
Line 207: Line 149:
 -> [[docs:guide-user:troubleshooting:generic.debrick]] -> [[docs:guide-user:troubleshooting:generic.debrick]]
  
 +Connecting to the internal serial port can allow changes to be made to partitions (mtd commands) and flashing through tftp by a connected tftp server.
 ===== Failsafe mode ===== ===== Failsafe mode =====
 -> [[docs:guide-user:troubleshooting:failsafe_and_factory_reset]] -> [[docs:guide-user:troubleshooting:failsafe_and_factory_reset]]
Line 214: Line 157:
 Set up your Internet connection, configure wireless, configure USB port, etc. Set up your Internet connection, configure wireless, configure USB port, etc.
  
-===== Specific Configuration ===== 
- 
-<WRAP BOX> 
-FIXME Please fill in real values for this device, then remove the EXAMPLEs 
- 
-==== Network interfaces ==== 
-The default network configuration is: 
-^ Interface Name   ^ Description                  ^ Default configuration    ^ 
-| br-lan           | EXAMPLE LAN & WiFi           | EXAMPLE 192.168.1.1/24   | 
-| vlan0 (eth0.0)   | EXAMPLE LAN ports (1 to 4)   | EXAMPLE None             | 
-| vlan1 (eth0.1)   | EXAMPLE WAN port             | EXAMPLE DHCP             | 
-| wl0              | EXAMPLE WiFi                 | EXAMPLE Disabled         | 
- 
-</WRAP> 
  
 ==== Switch Ports (for VLANs) ==== ==== Switch Ports (for VLANs) ====
Line 270: Line 199:
 </WRAP> </WRAP>
  
----- datatemplatelist dttpllist ---- +<!-- ToH: { 
-templatemeta:template_datatemplatelist +  "source""json", 
-cols    BrandModelVersionsDevice TypeAvailabilitySupported Since Commit_gitSupported since RelSupported current RelUnsupportedBootloaderCPUTargetCPU MHzFlash MBsRAM MBSwitchEthernet 100M ports_Ethernet Gbit ports_Comments network ports_ModemVLANWLAN 2.4GHzWLAN 5.0GHzWLAN HardwaresWLAN Comments_Detachable Antennas_USB ports_SATA ports_Comments USB SATA ports_SerialJTAGLED countButton countPower supplyDevice Techdata_pageidForum topic URL_urlwikidevi URL_urlOEM Device Homepage URL_urlFirmware OEM Stock URL_urlFirmware OpenWrt Install URL_urlFirmware OpenWrt Upgrade URL_urlComments_ +  "dom""t", 
-filter  : Brand=SIM +  "paging"false, 
-filter  Model=SIMAX1800T +  "rotate": true, 
-filter  Versions= +  "shownColumns": ["brand""model""version""devicetype""availability""supportedsincecommit""supportedsincerel""supportedcurrentrel""unsupported_functions""bootloader""cpu""target""cpumhz""flashmb""rammb""switch""ethernet100mports""ethernet1gports""commentsnetworkports""modem""vlan""wlan24ghz""wlan50ghz""wlanhardware""wlancomments""detachableantennas""usbports""sataports""commentsusbsataports""serial""jtag""ledcount""buttoncount""powersupply""deviceid""owrt_forum_topic_url""wikideviurl""oemdevicehomepageurl""firmwareoemstockurl", "firmwareopenwrtinstallurl", "firmwareopenwrtupgradeurl", "comments"]
-----+  "filterColumns"{"brand": "^SIM$", "model""^SIMAX1800T$", "version""^$"} 
 +-->
  
 ==== Photos ==== ==== Photos ====
Line 300: Line 230:
 FIXME //Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, ...// FIXME //Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, ...//
   * To remove the cover and open the device, do a/b/c   * To remove the cover and open the device, do a/b/c
 +  * a: unscrew screws in the feet{{:media:sim:bottom.jpg?400|}}
 +  * b: insert small screwdriver between halves, and slide around, twisting to crack open tabs{{:media:sim:crack_open.jpg?400|}}
 +  * c: remove the screws in blue to lift the board{{:media:sim:board_screws.jpg?400|}}
 +  * d: to remove the heatsink remove the screws in red
 +  * e: lift board and pull away from ethernet ports, it will be free to move around{{:media:sim:hidden_screws.jpg?400|}}
 +  * e: heatsink will pull off from other side, {{:media:sim:heatsink_removed.jpg?400|}}
 </WRAP> </WRAP>
  
 //Main PCB://\\ //Main PCB://\\
-**Insert photo of PCB**+{{:media:sim:heatsink_removed.jpg?400|}} 
 +{{:media:sim:other_side_board.jpg?400|}} 
 +{{:media:sim:inside_top_board.jpg?400|}}
  
 ==== Serial ==== ==== Serial ====
 -> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc. -> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc.
  
 +Serial adapter required, 115,200 connect to gnd, txd and rxd
 How to connect to the Serial Port of this specific device:\\ How to connect to the Serial Port of this specific device:\\
-**Insert photo of PCB with markings for serial port**+{{:media:sim:other_side_board.jpg?400|}}
  
-<WRAP BOX> +^ Serial connection parameters\\ for SIM SIMAX1800T @@Version@@ | 115200, 8N1, 3.3V |
-FIXME //Replace EXAMPLE by real values.// +
-</WRAP> +
- +
-^ Serial connection parameters\\ for SIM SIMAX1800T @@Version@@ | EXAMPLE 115200, 8N1, 3.3V |+
  
 ==== JTAG ==== ==== JTAG ====
Line 339: Line 274:
 ==== OpenWrt bootlog ==== ==== OpenWrt bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</nowiki>+<nowiki>[    0.000000] Linux version 5.15.150 (builder@buildhost) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r23809-234f1a2efa) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Fri Mar 22 22:09:42 2024 
 +[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3 
 +[    0.000000] printk: bootconsole [early0] enabled 
 +[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc) 
 +[    0.000000] MIPS: machine is SIM SIMAX1800T 
 +[    0.000000] Initrd not found or empty - disabling initrd 
 +[    0.000000] VPE topology {2,2} total 4 
 +[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 
 +[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
 +[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 
 +[    0.000000] Zone ranges: 
 +[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff] 
 +[    0.000000] Movable zone start for each node 
 +[    0.000000] Early memory node ranges 
 +[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff] 
 +[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] 
 +[    0.000000] percpu: Embedded 12 pages/cpu s17808 r8192 d23152 u49152 
 +[    0.000000] pcpu-alloc: s17808 r8192 d23152 u49152 alloc=12*4096 
 +[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3  
 +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64960 
 +[    0.000000] Kernel command line: console=ttyS0,115200 
 +[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) 
 +[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) 
 +[    0.000000] Writing ErrCtl register=00000000 
 +[    0.000000] Readback ErrCtl register=00000000 
 +[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off 
 +[    0.000000] Memory: 249092K/262144K available (7303K kernel code, 629K rwdata, 880K rodata, 1224K init, 225K bss, 13052K reserved, 0K cma-reserved) 
 +[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 
 +[    0.000000] rcu: Hierarchical RCU implementation. 
 +[    0.000000] Tracing variant of Tasks RCU enabled. 
 +[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. 
 +[    0.000000] NR_IRQS: 256 
 +[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns 
 +[    0.000004] sched_clock: 64 bits at 880MHz, resolution 1ns, wraps every 4398046511103ns 
 +[    0.008059] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688) 
 +[    0.066220] pid_max: default: 32768 minimum: 301 
 +[    0.071650] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) 
 +[    0.078867] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) 
 +[    0.090752] rcu: Hierarchical SRCU implementation. 
 +[    0.096306] smp: Bringing up secondary CPUs ... 
 +[    0.101817] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 
 +[    0.101850] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
 +[    0.101865] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 
 +[    0.101910] CPU1 revision is: 0001992f (MIPS 1004Kc) 
 +[    0.161118] Synchronize counters for CPU 1: done. 
 +[    0.193842] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 
 +[    0.193869] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
 +[    0.193881] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 
 +[    0.193911] CPU2 revision is: 0001992f (MIPS 1004Kc) 
 +[    0.252802] Synchronize counters for CPU 2: done. 
 +[    0.283576] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 
 +[    0.283604] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 
 +[    0.283617] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 
 +[    0.283653] CPU3 revision is: 0001992f (MIPS 1004Kc) 
 +[    0.338016] Synchronize counters for CPU 3: done. 
 +[    0.367898] smp: Brought up 1 node, 4 CPUs 
 +[    0.377230] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 
 +[    0.387038] futex hash table entries: 1024 (order: 3, 32768 bytes, linear) 
 +[    0.394132] pinctrl core: initialized pinctrl subsystem 
 +[    0.401068] NET: Registered PF_NETLINK/PF_ROUTE protocol family 
 +[    0.407737] thermal_sys: Registered thermal governor 'step_wise' 
 +[    0.413707] FPU Affinity set after 11720 emulations 
 +[    0.433436] clocksource: Switched to clocksource GIC 
 +[    0.440080] NET: Registered PF_INET protocol family 
 +[    0.445171] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) 
 +[    0.453536] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) 
 +[    0.461832] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) 
 +[    0.469540] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) 
 +[    0.477176] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) 
 +[    0.484281] TCP: Hash tables configured (established 2048 bind 2048) 
 +[    0.490733] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) 
 +[    0.497241] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) 
 +[    0.504575] NET: Registered PF_UNIX/PF_LOCAL protocol family 
 +[    0.510217] PCI: CLS 0 bytes, default 32 
 +[    0.516637] workingset: timestamp_bits=14 max_order=16 bucket_order=2 
 +[    0.528918] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +[    0.534777] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +[    0.545867] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) 
 +[    0.557574] mt7621_gpio 1e000600.gpio: registering 32 gpios 
 +[    0.563717] mt7621_gpio 1e000600.gpio: registering 32 gpios 
 +[    0.569728] mt7621_gpio 1e000600.gpio: registering 32 gpios 
 +[    0.575948] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges: 
 +[    0.582605] mt7621-pci 1e140000.pcie:   No bus range found for /pcie@1e140000, using [bus 00-ff] 
 +[    0.591409] mt7621-pci 1e140000.pcie:      MEM 0x0060000000..0x006fffffff -> 0x0060000000 
 +[    0.599532] mt7621-pci 1e140000.pcie:       IO 0x001e160000..0x001e16ffff -> 0x0000000000 
 +[    0.963437] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK) 
 +[    0.970335] mt7621-pci 1e140000.pcie: PCIE0 enabled 
 +[    0.975223] mt7621-pci 1e140000.pcie: PCIE1 enabled 
 +[    0.980033] PCI coherence region base: 0x60000000, mask/settings: 0xf0000002 
 +[    0.987218] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00 
 +[    0.993533] pci_bus 0000:00: root bus resource [bus 00-ff] 
 +[    0.998962] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] 
 +[    1.005828] pci_bus 0000:00: root bus resource [io  0x0000-0xffff] 
 +[    1.011972] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400 
 +[    1.017925] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff] 
 +[    1.024147] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff] 
 +[    1.030395] pci 0000:00:00.0: supports D1 
 +[    1.034331] pci 0000:00:00.0: PME# supported from D0 D1 D3hot 
 +[    1.040961] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400 
 +[    1.046990] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff] 
 +[    1.053175] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff] 
 +[    1.059505] pci 0000:00:01.0: supports D1 
 +[    1.063458] pci 0000:00:01.0: PME# supported from D0 D1 D3hot 
 +[    1.071072] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring 
 +[    1.079064] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring 
 +[    1.087289] pci 0000:01:00.0: [14c3:7916] type 00 class 0x000280 
 +[    1.093253] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref] 
 +[    1.100456] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref] 
 +[    1.107633] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref] 
 +[    1.114928] pci 0000:01:00.0: supports D1 D2 
 +[    1.119109] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold 
 +[    1.125742] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) 
 +[    1.141857] pci 0000:00:00.0: PCI bridge to [bus 01-ff] 
 +[    1.147082] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff] 
 +[    1.153083] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff] 
 +[    1.159873] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff pref] 
 +[    1.167043] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 
 +[    1.173960] pci 0000:02:00.0: [14c3:7915] type 00 class 0x000280 
 +[    1.179927] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref] 
 +[    1.187137] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref] 
 +[    1.194318] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref] 
 +[    1.201572] pci 0000:02:00.0: supports D1 D2 
 +[    1.205805] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold 
 +[    1.212363] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) 
 +[    1.228517] pci 0000:00:01.0: PCI bridge to [bus 02-ff] 
 +[    1.233750] pci 0000:00:01.0:   bridge window [io  0x0000-0x0fff] 
 +[    1.239755] pci 0000:00:01.0:   bridge window [mem 0x00000000-0x000fffff] 
 +[    1.246536] pci 0000:00:01.0:   bridge window [mem 0x00000000-0x000fffff pref] 
 +[    1.253703] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 
 +[    1.260280] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] 
 +[    1.266850] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] 
 +[    1.273750] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000] 
 +[    1.280281] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000] 
 +[    1.287236] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] 
 +[    1.293968] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x602fffff pref] 
 +[    1.301106] pci 0000:00:01.0: BAR 8: assigned [mem 0x60300000-0x603fffff] 
 +[    1.307886] pci 0000:00:01.0: BAR 9: assigned [mem 0x60400000-0x605fffff pref] 
 +[    1.315049] pci 0000:00:00.0: BAR 1: assigned [mem 0x60600000-0x6060ffff] 
 +[    1.321762] pci 0000:00:01.0: BAR 1: assigned [mem 0x60610000-0x6061ffff] 
 +[    1.328550] pci 0000:00:00.0: BAR 7: assigned [io  0x0000-0x0fff] 
 +[    1.334584] pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff] 
 +[    1.340608] pci 0000:01:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit pref] 
 +[    1.348344] pci 0000:01:00.0: BAR 2: assigned [mem 0x60200000-0x60203fff 64bit pref] 
 +[    1.356037] pci 0000:01:00.0: BAR 4: assigned [mem 0x60204000-0x60204fff 64bit pref] 
 +[    1.363734] pci 0000:00:00.0: PCI bridge to [bus 01] 
 +[    1.368608] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff] 
 +[    1.374691] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff] 
 +[    1.381395] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x602fffff pref] 
 +[    1.388620] pci 0000:02:00.0: BAR 0: assigned [mem 0x60400000-0x604fffff 64bit pref] 
 +[    1.396318] pci 0000:02:00.0: BAR 2: assigned [mem 0x60500000-0x60503fff 64bit pref] 
 +[    1.404009] pci 0000:02:00.0: BAR 4: assigned [mem 0x60504000-0x60504fff 64bit pref] 
 +[    1.411665] pci 0000:00:01.0: PCI bridge to [bus 02] 
 +[    1.416617] pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff] 
 +[    1.422626] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x603fffff] 
 +[    1.429396] pci 0000:00:01.0:   bridge window [mem 0x60400000-0x605fffff pref] 
 +[    1.439683] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled 
 +[    1.451839] printk: console [ttyS0] disabled 
 +[    1.456235] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A 
 +[    1.465267] printk: console [ttyS0] enabled 
 +[    1.473545] printk: bootconsole [early0] disabled 
 +[    1.487031] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1 
 +[    1.493509] nand: AMD/Spansion S34ML01G2 
 +[    1.497445] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 
 +[    1.505024] mt7621-nand 1e003000.nand: ECC strength adjusted to 4 bits 
 +[    1.511695] 4 fixed-partitions partitions found on MTD device mt7621-nand 
 +[    1.519484] Creating 4 MTD partitions on "mt7621-nand": 
 +[    1.524778] 0x000000000000-0x000000080000 : "u-boot" 
 +[    1.538929] 0x000000080000-0x000000100000 : "u-boot-env" 
 +[    1.553023] 0x000000100000-0x000000180000 : "factory" 
 +[    1.567056] 0x000000180000-0x000007c00000 : "firmware" 
 +[    3.452256] 2 fixed-partitions partitions found on MTD device firmware 
 +[    3.458867] Creating 2 MTD partitions on "firmware": 
 +[    3.463909] 0x000000000000-0x000000400000 : "kernel" 
 +[    3.531739] 0x000000400000-0x000007a80000 : "ubi" 
 +[    5.497318] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module 
 +[    5.512012] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 20 
 +[    5.524729] mtk_soc_eth 1e100000.ethernet wan: mediatek frame engine at 0xbe100000, irq 20 
 +[    5.535343] i2c_dev: i2c /dev entries driver 
 +[    5.543576] NET: Registered PF_INET6 protocol family 
 +[    5.551446] Segment Routing with IPv6 
 +[    5.555298] In-situ OAM (IOAM) with IPv6 
 +[    5.559329] NET: Registered PF_PACKET protocol family 
 +[    5.564502] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. 
 +[    5.578289] 8021q: 802.1Q VLAN Support v1.8 
 +[    5.588694] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module 
 +[    5.614275] mt7530-mdio mdio-bus:1f: configuring for fixed/rgmii link mode 
 +[    5.622004] mt7530-mdio mdio-bus:1f: Link is Up - 1Gbps/Full - flow control rx/tx 
 +[    5.624694] mt7530-mdio mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7530 PHY] (irq=22) 
 +[    5.642676] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7530 PHY] (irq=23) 
 +[    5.655755] mt7530-mdio mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7530 PHY] (irq=24) 
 +[    5.668435] DSA: tree 0 setup 
 +[    5.675306] UBI: auto-attach mtd5 
 +[    5.678664] ubi0: attaching mtd5 
 +[    8.714313] ubi0: scanning is finished 
 +[    8.736084] ubi0: attached mtd5 (name "ubi", size 118 MiB) 
 +[    8.741609] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes 
 +[    8.748528] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 
 +[    8.755335] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 
 +[    8.762273] ubi0: good PEBs: 948, bad PEBs: 0, corrupted PEBs: 0 
 +[    8.768282] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 
 +[    8.775505] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1756311454 
 +[    8.784634] ubi0: available PEBs: 0, total reserved PEBs: 948, PEBs reserved for bad PEB handling: 20 
 +[    8.793884] ubi0: background thread "ubi_bgt0d" started, PID 305 
 +[    8.796528] block ubiblock0_0: created from ubi0:0(rootfs) 
 +[    8.805438] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem 
 +[    8.821476] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. 
 +[    8.833043] Freeing unused kernel image (initmem) memory: 1224K 
 +[    8.839063] This architecture does not have kernel memory protection. 
 +[    8.845531] Run /sbin/init as init process 
 +[    8.849616]   with arguments: 
 +[    8.849621]     /sbin/init 
 +[    8.849627]   with environment: 
 +[    8.849632]     HOME=/ 
 +[    8.849637]     TERM=linux 
 +[    9.312182] init: Console is alive 
 +[    9.316331] init: - watchdog - 
 +[   10.012676] kmodloader: loading kernel modules from /etc/modules-boot.d/
 +[   10.069896] kmodloader: done loading kernel modules from /etc/modules-boot.d/
 +[   10.082275] init: - preinit - 
 +[   10.845743] random: jshn: uninitialized urandom read (4 bytes read) 
 +[   10.967469] random: jshn: uninitialized urandom read (4 bytes read) 
 +[   11.007435] random: jshn: uninitialized urandom read (4 bytes read) 
 +[   11.294423] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode 
 +[   11.307214] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx 
 +[   11.316148] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode 
 +[   11.324224] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 
 +[   13.517595] UBIFS (ubi0:1): Mounting in unauthenticated mode 
 +[   13.523735] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 428 
 +[   13.605683] UBIFS (ubi0:1): recovery needed 
 +[   13.794947] UBIFS (ubi0:1): recovery completed 
 +[   13.799606] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" 
 +[   13.807444] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes 
 +[   13.817337] UBIFS (ubi0:1): FS size: 111738880 bytes (106 MiB, 880 LEBs), max 891 LEBs, journal size 5586944 bytes (5 MiB, 44 LEBs) 
 +[   13.829135] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB) 
 +[   13.835754] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID A2EF4563-520E-4C64-8CBA-9B13432E20B0, small LPT model 
 +[   13.851410] mount_root: switching to ubifs overlay 
 +[   13.874818] urandom-seed: Seeding with /etc/urandom.seed 
 +[   13.990471] procd: - early - 
 +[   13.993783] procd: - watchdog - 
 +[   14.616893] procd: - watchdog - 
 +[   14.624310] procd: - ubus - 
 +[   14.689375] random: ubusd: uninitialized urandom read (4 bytes read) 
 +[   14.698494] random: ubusd: uninitialized urandom read (4 bytes read) 
 +[   14.710031] random: ubusd: uninitialized urandom read (4 bytes read) 
 +[   14.721813] procd: - init - 
 +[   15.365416] kmodloader: loading kernel modules from /etc/modules.d/
 +[   15.600643] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b 
 +[   15.608228] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36 
 +[   15.797881] pci 0000:00:00.0: enabling device (0000 -> 0003) 
 +[   15.803646] mt7915e_hif 0000:01:00.0: enabling device (0000 -> 0002) 
 +[   15.810455] pci 0000:00:01.0: enabling device (0000 -> 0003) 
 +[   15.816203] mt7915e 0000:02:00.0: enabling device (0000 -> 0002) 
 +[   16.089133] mt7915e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20220929104113a 
 +[   16.089133]  
 +[   16.424272] mt7915e 0000:02:00.0: WM Firmware Version: ____000000, Build Time: 20220929104145 
 +[   16.458399] mt7915e 0000:02:00.0: WA Firmware Version: DEV_000000, Build Time: 20220929104205 
 +[   16.610378] urngd: v1.0.2 started. 
 +[   16.670053] PPP generic driver version 2.4.2 
 +[   16.678439] NET: Registered PF_PPPOX protocol family 
 +[   16.696408] kmodloader: done loading kernel modules from /etc/modules.d/
 +[   16.983246] random: jshn: uninitialized urandom read (4 bytes read) 
 +[   17.529598] random: jshn: uninitialized urandom read (4 bytes read) 
 +[   17.548936] random: ubusd: uninitialized urandom read (4 bytes read) 
 +[   17.765358] random: crng init done 
 +[   17.768817] random: 32 urandom warning(s) missed due to ratelimiting 
 +[   19.159835] mtdblock: MTD device 'factory' is NAND, please consider using UBI block devices instead. 
 +[   25.441818] mtk_soc_eth 1e100000.ethernet eth0: Link is Down 
 +[   25.470769] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode 
 +[   25.479298] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx 
 +[   25.484794] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode 
 +[   25.497338] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 
 +[   25.504397] br-lan: port 1(lan1) entered blocking state 
 +[   25.509684] br-lan: port 1(lan1) entered disabled state 
 +[   25.517610] device lan1 entered promiscuous mode 
 +[   25.522301] device eth0 entered promiscuous mode 
 +[   25.571692] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode 
 +[   25.581430] br-lan: port 2(lan2) entered blocking state 
 +[   25.586825] br-lan: port 2(lan2) entered disabled state 
 +[   25.594767] device lan2 entered promiscuous mode 
 +[   25.615504] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode 
 +[   25.625395] br-lan: port 3(lan3) entered blocking state 
 +[   25.630659] br-lan: port 3(lan3) entered disabled state 
 +[   25.639687] device lan3 entered promiscuous mode 
 +[   25.667903] mtk_soc_eth 1e100000.ethernet wan: PHY [mdio-bus:04] driver [MediaTek MT7530 PHY] (irq=POLL) 
 +[   25.677511] mtk_soc_eth 1e100000.ethernet wan: configuring for phy/rgmii link mode 
 +[   28.383136] br-lan: port 4(phy0-ap0) entered blocking state 
 +[   28.388852] br-lan: port 4(phy0-ap0) entered disabled state 
 +[   28.395044] device phy0-ap0 entered promiscuous mode 
 +[   28.474038] IPv6: ADDRCONF(NETDEV_CHANGE): phy0-ap0: link becomes ready 
 +[   28.481111] br-lan: port 4(phy0-ap0) entered blocking state 
 +[   28.486852] br-lan: port 4(phy0-ap0) entered forwarding state 
 +[   28.494525] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready 
 +[   28.658910] br-lan: port 5(phy0-ap1) entered blocking state 
 +[   28.664608] br-lan: port 5(phy0-ap1) entered disabled state 
 +[   28.670656] device phy0-ap1 entered promiscuous mode 
 +[   28.679240] br-lan: port 5(phy0-ap1) entered blocking state 
 +[   28.684940] br-lan: port 5(phy0-ap1) entered forwarding state 
 +[   28.769735] IPv6: ADDRCONF(NETDEV_CHANGE): phy0-ap1: link becomes ready 
 +[   29.170681] br-lan: port 6(phy1-ap0) entered blocking state 
 +[   29.176355] br-lan: port 6(phy1-ap0) entered disabled state 
 +[   29.182406] device phy1-ap0 entered promiscuous mode 
 +[   29.187723] br-lan: port 6(phy1-ap0) entered blocking state 
 +[   29.193328] br-lan: port 6(phy1-ap0) entered forwarding state 
 +[   29.383844] br-lan: port 6(phy1-ap0) entered disabled state 
 +[   29.835270] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap0: link becomes ready 
 +[   29.842261] br-lan: port 6(phy1-ap0) entered blocking state 
 +[   29.847930] br-lan: port 6(phy1-ap0) entered forwarding state 
 +[   29.909204] br-lan: port 7(phy1-ap1) entered blocking state 
 +[   29.914901] br-lan: port 7(phy1-ap1) entered disabled state 
 +[   29.920967] device phy1-ap1 entered promiscuous mode 
 +[   29.930074] br-lan: port 7(phy1-ap1) entered blocking state 
 +[   29.935824] br-lan: port 7(phy1-ap1) entered forwarding state 
 +[   29.966388] device phy1-ap1 left promiscuous mode 
 +[   29.971450] br-lan: port 7(phy1-ap1) entered disabled state 
 +[   30.077227] br-lan: port 7(phy1-ap1) entered blocking state 
 +[   30.082830] br-lan: port 7(phy1-ap1) entered disabled state 
 +[   30.089027] device phy1-ap1 entered promiscuous mode 
 +[   30.094449] br-lan: port 7(phy1-ap1) entered blocking state 
 +[   30.100040] br-lan: port 7(phy1-ap1) entered forwarding state 
 +[   30.106411] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap1: link becomes ready 
 +[   88.421828] mt7530-mdio mdio-bus:1f lan3: Link is Up - 100Mbps/Full - flow control rx/tx 
 +[   88.430250] br-lan: port 3(lan3) entered blocking state 
 +[   88.435540] br-lan: port 3(lan3) entered forwarding state 
 +[   88.442231] mt7530-mdio mdio-bus:1f lan3: Link is Down 
 +[   88.447790] br-lan: port 3(lan3) entered disabled state 
 +[   89.931830] mt7530-mdio mdio-bus:1f lan3: Link is Up - 100Mbps/Full - flow control rx/tx 
 +[   89.940082] br-lan: port 3(lan3) entered blocking state 
 +[   89.945352] br-lan: port 3(lan3) entered forwarding state 
 +[  127.931824] mt7530-mdio mdio-bus:1f lan2: Link is Up - 1Gbps/Full - flow control rx/tx 
 +[  127.939924] br-lan: port 2(lan2) entered blocking state 
 +[  127.945227] br-lan: port 2(lan2) entered forwarding state 
 +[  147.822061] mt7530-mdio mdio-bus:1f lan1: Link is Up - 100Mbps/Full - flow control off 
 +[  147.830172] br-lan: port 1(lan1) entered blocking state 
 +[  147.835488] br-lan: port 1(lan1) entered forwarding state 
 +[  234.260364] mt7530-mdio mdio-bus:1f lan3: Link is Down 
 +[  234.265731] br-lan: port 3(lan3) entered disabled state 
 +[  235.926197] mt7530-mdio mdio-bus:1f lan3: Link is Up - 100Mbps/Full - flow control rx/tx 
 +[  235.934463] br-lan: port 3(lan3) entered blocking state 
 +[  235.939692] br-lan: port 3(lan3) entered forwarding state</nowiki>
 </WRAP>\\ </WRAP>\\
  
Line 348: Line 621:
  
 ===== Tags ===== ===== Tags =====
-<WRAP BOX> 
-FIXME //Add tags below, then remove this fixme.// 
-</WRAP> 
  
-[[meta:tags|How to add tags]] +{{tag>MT7621}} {{tag>256RAM}} {{tag>128Flash}} {{tag>GigabitEthernet}} {{tag>wlan}} {{tag>802.11ax}} {{tag>802.11abgn}} {{tag>NonDetachableAntenna}}
-{{tag>EXAMPLETAG}}+
  • Last modified: 2024/12/13 09:59
  • by frollic