Serval Project Mesh Extender v2.0
OpenWrt support
The device ships with OpenWrt 14.07 Barrier Breaker, inside the GL-iNet Domino Core
Hardware highlights
| CPU | Ram | Flash | Network | WLAN | USB | Serial | JTag |
|---|---|---|---|---|---|---|---|
| Atheros AR9331 @ 400 MHz | 64 MiB | 16 MiB | 2x 10/100 | bgn | 1x 2.0 | Yes | ? |
Hardware
Info
| Architecture | MIPS |
|---|---|
| Vendor | Qualcomm Atheros |
| Bootloader | U-Boot |
| System-On-Chip | Atheros AR9331 - MIPS 24K |
| CPU/Speed | 400 MHz |
| Flash-Chip | Winbond |
| Flash size | 16 MiB |
| RAM | 64 MiB |
| Wireless | AR9331 2.4GHz 802.11bgn |
| Ethernet | 2 x 10/100 Mbit/s w/ vlan support |
| USB | 1x 2.0 |
| Serial | Yes |
| JTAG | Not populated |
Photos
Insert photo of front of the casing
Insert photo of back of the casing
Insert photo of backside label
Insert photo of PCB
Opening the case
Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, ...
Serial
→ port.serial general information about the serial port, serial port cable, etc.
How to connect to the Serial Port of this specific device:
Insert photo of PCB with markings for serial port
Replace EXAMPLE by real values.
| Serial connection parameters for meshextender2 | EXAMPLE 115200, 8N1 |
|---|
JTAG
→ port.jtag general information about the JTAG port, JTAG cable, etc.
How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port
Bootlogs
OEM bootlog
COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE
OpenWrt bootlog
COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING