| Both sides previous revision Previous revision Next revision | Previous revision Next revisionBoth sides next revision |
| toh:sercomm:h500-s [2023/03/05 11:28] – [Recovery] openwrt failsafe danitool | toh:sercomm:h500-s [2023/04/06 18:55] – [Serial] make it more clear danitool |
|---|
| {{:media:sercomm:h500s:h500s-switch_diagram.png?direct&600|}} | {{:media:sercomm:h500s:h500s-switch_diagram.png?direct&600|}} |
| |
| The external switch won't be configurable unless it gets support for [[https://www.kernel.org/doc/html/latest/networking/dsa/index.html|DSA]] (this might happen in the future with the //bmips// target). | We only can configure the internal switch in **bcm63xx**. The external switch will behave as a dumb switch and viewed as one LAN port in LuCi. The WAN port belongs to the internal switch and can be configured in LuCi. |
| | |
| Therefore we'll only can configure the internal switch. The external switch will behave as a dumb switch and viewed as one LAN port in LuCi. The WAN port belongs to the internal switch and can be configured in LuCi. | |
| |
| {{:media:sercomm:h500s:h500s-switch_luci.png?direct&600|}} | {{:media:sercomm:h500s:h500s-switch_luci.png?direct&600|}} |
| | |
| | The external switch can be configured using the **bmips** target with support for [[https://www.kernel.org/doc/html/latest/networking/dsa/index.html|DSA]]. See commit [[commit>6df12200d903338d36008cb207a41bd456346b5d|bmips: add support for Sercomm H-500s]] |
| ==== Wifi ==== | ==== Wifi ==== |
| Wi-Fi CERTIFIED n: | Wi-Fi CERTIFIED n: |
| -> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc. | -> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc. |
| |
| How to connect to the Serial Port of this specific device:\\ | How to connect to the Serial Port of this specific device: |
| |
| | ***BCM63167** serial port:\\ <a2s> |
| <a2s> | |
| ▽ 4 | ▽ 4 |
| #----------------# | #----------------# |
| |.-. .-. .-. .-. | | |.-. .-. .-. .-. | |
| |'-' '-' '-' '-' | | |'-' '-' '-' '-' | |
| #----------------# J302 and JXW1 | #----------------# J302 |
| GND TX VCC RX | GND TX VCC RX |
| </a2s> | </a2s>{{:media:sercomm:h500s:h500s-bcm63167_serial.jpg?direct&300|}} |
| Only connect GND, TX and RX. Baud rate: 115200 | |
| |
| ***BCM63167** serial port\\ {{:media:sercomm:h500s:h500s-bcm63167_serial.jpg?direct&300|}} | ***QT3740BC** serial port:\\ <a2s> |
| | ▽ 4 |
| ***QT3740BC** serial port\\ {{:media:sercomm:h500s:h500s-QT3740BC_serial.jpg?direct&300|}} | #----------------# |
| | |.-. .-. .-. .-. | |
| | |'-' '-' '-' '-' | |
| | #----------------# JXW1 |
| | GND TX VCC RX |
| | </a2s>{{:media:sercomm:h500s:h500s-QT3740BC_serial.jpg?direct&300|}} |
| |
| | Only connect GND, TX and RX. |
| |
| | Baud rate: 115200 |
| |
| ==== GPIOs ==== | ==== GPIOs ==== |