Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:rostelecom:rt-fe-1a [2023/12/06 20:07] – [Serial] csharper2005toh:rostelecom:rt-fe-1a [2023/12/06 20:19] – [OEM installation using the TFTP method] csharper2005
Line 4: Line 4:
 /* DO NOT CREATE NEW DEVICEPAGES VIA COPY & PASTE! */ /* DO NOT CREATE NEW DEVICEPAGES VIA COPY & PASTE! */
 /* USE https://openwrt.org/meta/create_new_device_page */ /* USE https://openwrt.org/meta/create_new_device_page */
- 
-{{page>meta:infobox:construction&noheader&nofooter&noeditbtn}} 
  
 Rostelecom RT-FE-1A is a wireless WiFi 5 router manufactured by Sercomm company. Rostelecom RT-FE-1A is a wireless WiFi 5 router manufactured by Sercomm company.
Line 140: Line 138:
  
 ==== Flash Layout ==== ==== Flash Layout ====
-<WRAP BOX> 
-FIXME //[[:docs:techref:flash.layout#discovery_how_to_find_out|Find out flash layout]], then add the flash layout table here (copy, paste, modify the [[docs:techref:flash.layout#partitioning_of_the_flash|example]]).// 
  
-Please check out the article [[docs:techref:flash.layout|Flash layout]]. It contains examples and explanations that describe how to document the flash layout. +^ Start - End                    ^ Label                             ^ 
-</WRAP>+| 0x000000000000-0x000000100000  | "u-boot"                          
 +| 0x000000100000-0x000000200000  | "dynamic partition map"           | 
 +| 0x000000200000-0x000000300000  | "Factory"                         | 
 +| 0x000000300000-0x000000400000  | "Boot Flag"                       | 
 +| 0x000000400000-0x000000a00000  | "kernel"                          | 
 +| 0x000000a00000-0x000001000000  | "Kernel 2"                        | 
 +| 0x000001000000-0x000002800000  | "File System 1"                   | 
 +| 0x000002800000-0x000004000000  | "File System 2"                   | 
 +| 0x000004000000-0x000004800000  | "Configuration/log"               | 
 +| 0x000004800000-0x000005400000  | "application tmp buffer (Ftool)" 
 +| 0x000005400000-0x000007c20000  | "free space (in stock firmware)" 
  
 ==== OEM easy installation ==== ==== OEM easy installation ====
  
-<WRAP BOX> +See [[:toh:rostelecom:rt-fe-1a#installation]]
-FIXME //The instructions below are for Broadcom devices and only serve as an example.//\\ +
-**//Remove / modify them if they do not apply to this particular device!//** +
- +
-This section deals with +
-  * How you install OpenWrt from a device freshly opened +
-  * The steps required such as reset to factory defaults if the device has already been configured +
- +
-**Note:** Reset router to factory defaults if it has been previously configured. +
-  * Browse to ''<nowiki>http://192.168.1.1/Upgrade.asp</nowiki>'' +
-  * Upload .bin file to router +
-  * Wait for it to reboot +
-  * Telnet to 192.168.1.1 and set a root password, or browse to ''<nowiki>http://192.168.1.1</nowiki>'' if LuCI is installed. +
-</WRAP> +
 ==== OEM installation using the TFTP method ==== ==== OEM installation using the TFTP method ====
  
 ->  [[docs:guide-user:installation:generic.flashing.tftp]] ->  [[docs:guide-user:installation:generic.flashing.tftp]]
  
 +==== Return to stock  ====
 +Change bootflag to Sercomm1 in OpenWrt CLI and then reboot:
 +<code>
 +printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3
 +</code>
 ===== Upgrading OpenWrt ===== ===== Upgrading OpenWrt =====
 ->  [[docs:guide-user:installation:generic.sysupgrade]] ->  [[docs:guide-user:installation:generic.sysupgrade]]
Line 206: Line 204:
  
 ===== Specific Configuration ===== ===== Specific Configuration =====
- 
-<WRAP BOX> 
-FIXME Please fill in real values for this device, then remove the EXAMPLEs 
  
 ==== Network interfaces ==== ==== Network interfaces ====
 The default network configuration is: The default network configuration is:
-^ Interface Name   ^ Description                  ^ Default configuration    ^ +^ Interface Name   ^ Description           ^ Default configuration    ^ 
-| br-lan           EXAMPLE LAN & WiFi           | EXAMPLE 192.168.1.1/24   +| br-lan           lan1 - lan4           | 192.168.1.1/24           
-vlan0 (eth0.0)   EXAMPLE LAN ports (1 to 4)   EXAMPLE None             | +wan              wan                   | DHCP                     
-| vlan1 (eth0.1)   | EXAMPLE WAN port             | EXAMPLE DHCP             +
-| wl0              | EXAMPLE WiFi                 | EXAMPLE Disabled         |+
  
-</WRAP> 
  
 ==== Switch Ports (for VLANs) ==== ==== Switch Ports (for VLANs) ====
-<WRAP BOX> 
-FIXME Please fill in real values for this device, then remove the EXAMPLEs 
  
-Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on. 
 ^ Port             ^ Switch port   ^ ^ Port             ^ Switch port   ^
-| Internet (WAN)   EXAMPLE 4     | +| Internet (WAN)       | 
-| LAN 1            | EXAMPLE 3     | +| LAN 1            |     | 
-| LAN 2            | EXAMPLE 2     | +| LAN 2            | 2     | 
-| LAN 3            | EXAMPLE 1     | +| LAN 3            |     | 
-| LAN 4            | EXAMPLE 0     |+| LAN 4            |     |
  
-</WRAP> 
  
 ==== Buttons ==== ==== Buttons ====
Line 626: Line 615:
  
 ===== Notes ===== ===== Notes =====
-//Space for additional notes, links to forum threads or other resources.// 
  
-  * ... 
  
 ===== Tags ===== ===== Tags =====
-<WRAP BOX> +{{tag>U-boot 2core ramips mediatek MT7621 GigabitEthernet 1NIC 5Port 2WNIC wlan 802.11abgn 802.11a 802.11bgn 802.11ac mt7603 mt7615 4Ant 128NAND 256RAM Serial GPIO 2button 12v_powered rostelecom sercomm Dual_firmware }}
-FIXME //Add tags below, then remove this fixme.// +
-</WRAP>+
  
-[[meta:tags|How to add tags]] 
-{{tag>EXAMPLETAG}} 
  • Last modified: 2024/03/26 17:32
  • by csharper2005