Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
toh:rosewill:rnx-n300rt [2015/01/05 20:02] – [Automatically Edited Header Method] moved link sudomantoh:rosewill:rnx-n300rt [2021/01/30 18:52] (current) – [Automatically Edited Header Method] sudoman
Line 1: Line 1:
 +====== Rosewill RNX-N300RT ======
  
 +This is a rebranded TP-LINK [[..:tp-link/tl-wr841nd|TL-WR841ND v7.x]] but the Rosewill web interface firmware updater will only accept firmware with Rosewill vendor bytes (in the file header). OpenWRT currently does not have those bytes by default, but there is an experiemental script that can add them. As an alternative, DD-WRT has everything we need, so we can use it to bootstrap.
 +
 +===== Install OpenWrt 12.09 on a Rosewill RNX-N300RT =====
 +
 +==== DD-WRT Method ====
 +
 +  * Tested with a Rosewill RNX-N300RT v1 hardware wireless router, purchased Dec. 2013
 +  * Tested with DD-WRT v24 PreSP2 build 21061
 +  * Tested with OpenWrt 12.09 final
 +
 +Temporary flashes to DD-WRT and TP-LINK firmware are needed to get OpenWrt on this device.
 +
 +=== Step 1 ===
 +
 +Use the Rosewill web admin interface to flash to **DD-WRT** using the DD-WRT Rosewill RNX-N300RT firmware.
 +
 +  * Download //factory-to-ddwrt.bin// from [[http://www.dd-wrt.com/routerdb/de/download/Rosewill/RNX-N300RT/-/factory-to-ddwrt.bin/4063]] (just go to this link and the file will sent to the browser as a download) -- the DD-WRT firmware image has the Rosewill RNX-N300RT vendor bytes which the OpenWRT firmware currently lacks.
 +  * Log into the Rosewill web admin interface at ''%%http://192.168.1.1%%'', user admin, password admin
 +  * Go to System Tools > Firmware Upgrade, browse to select //factory-to-ddwrt.bin// and click Upgrade > OK
 +  * Wait for the firmware to be uploaded and the router to reboot. The browser should automatically connect again to the router at ''%%http://192.168.1.1%%''
 +  * When the DD-WRT initial web login screen at about changing the default password appears, enter required information
 +    * Username: admin
 +    * Password: admin
 +  * Continue to step 2
 +
 +=== Step 2 ===
 +
 +Use the DD-WRT web admin interface to flash to stock **TP-LINK TL-WR841N/ND v7** firmware.
 +
 +  * Download TP-LINK TL-WR841ND v7 stock firmware by downloading the file //wr841nv7_webrevert.rar// from the DD-WRT forum post at [[http://www.dd-wrt.com/phpBB2/viewtopic.php?p=521084#521084]]. **You must have a forum account and be logged in to see it**.
 +  * **Be sure that you unrar the file** to get the file //wr841nv7_webrevert.bin//
 +  * In the DD-WRT web admin interface, go to Administration > Firmware Upgrade
 +    * Firmware Upgrade
 +      * After flashing, reset to: choose **Reset to Default settings**
 +      * Please select a file to upgrade: click "Browse..." and select the extracted //wr841nv7_webrevert.bin// file from the .rar download archive
 +      * Click "Upgrade" and wait for the firmware update to complete
 +  * Wait for the firmware to be uploaded and the router to reboot. When DD-WRT reports the firmware flash is complete, reconnect the browser to ''%%http://192.168.1.1%%''
 +  * When the TP-LINK initial web login screen appears, log in as:
 +    * Username: admin
 +    * Password: admin
 +  * Continue to step 3
 +
 +=== Step 3 ===
 +
 +Use the TP-LINK web admin interface to flash to **OpenWRT** version 12.09 or later.
 +
 +  * Download the correct OpenWrt ...squashfs-factory.bin image for this hardware: for OpenWrt 12.09, the direct link is [[http://downloads.openwrt.org/attitude_adjustment/12.09/ar71xx/generic/openwrt-ar71xx-generic-tl-wr841nd-v7-squashfs-factory.bin]] (be sure to get the -factory firmware, NOT the -sysupgrade firmware)
 +  * Go to System Tools > Firmware Upgrade, browse to select //openwrt-ar71xx-generic-tl-wr841nd-v7-squashfs-factory.bin// and click Upgrade > OK
 +  * Wait for the firmware to be uploaded and the router to reboot. The browser should automatically connect again to the router at ''%%http://192.168.1.1%%''
 +  * The OpenWrt 12.09 LuCI web interface setup screen should appear
 +
 +==== Automatically Edited Header Method ====
 +
 +  * Tested with a Rosewill RNX-N300RT (v1 ?) hardware wireless router, purchased December 2014
 +  * Tested with OpenWrt 14.07 final
 +
 +Another way to install is by using the experimental [[https://gitlab.com/rosewill-mod/rosewill-mod/raw/master/rosewill-mod.py|rosewill-mod.py]] script. (Right click to save.) Use a TL-WR841ND v7.x factory.bin file. ([[https://downloads.openwrt.org/releases/18.06.9/targets/ar71xx/tiny/openwrt-18.06.9-ar71xx-tiny-tl-wr841-v7-squashfs-factory.bin|version 18.06]])
 +<code>$ python3 rosewill-mod.py < in.bin > out.bin</code>
 +
 +(Replace ''in.bin'' with the file name of the downloaded ''factory.bin'' file.)
 +
 +Connect to your router over ethernet, then flash the ''out.bin'' through your router's graphical interface. (''%%http://192.168.1.1%%'') Use the modified image for the first installation only.
 +
 +===== Failsafe mode for Rosewill RNX-N300RT =====
 +
 +==== Boot in failsafe mode ====
 +
 +  * Unplug the router's power cord
 +  * Connect any router LAN port directly to your PC
 +  * Configure your PC with a static IP address: 192.168.1.2
 +  * Plug the power on to the router
 +  * Wait until the "SYS" LED starts flashing repeatedly
 +  * Press the "WPS/Reset" button (on the front of the router) once -- the "SYS" LED will now start flashing at a faster rate
 +
 +  * The router is now in failsafe mode and can be reached by telnet at 192.168.1.1 with no username or password required
 +    * see [[docs:guide-user:troubleshooting:failsafe_and_factory_reset]] for more, including how to mount the usual file system
 +
 +==== Recover from flash of bad image on a ThinkPenguin-supplied router ====
 +
 +This requires a working u-boot-mod bootloader from ThinkPenguin, which you probably never touched. It also requires a very broken rootfs. When turning on the router in this state, you will probably see the lights flash all at once, then a few seconds later all of them flicker very fast.
 +
 +Stop network manager and dhcp and whatever gives you a dynamically set address. Give yourself the static IP of 192.168.1.2/24. Connect the router via the first LAN port. Turn on the router. You might not need to press and hold the reset button during boot. Optionally run:
 +
 +    nmap 192.168.1.0/24
 +
 +You should see that an http port is open on the router. Go to ''%%http://192.168.1.1%%'' in your browser. Select the proper image and upload it. Wait for the router to reboot and for lights to blink like normal.
 +
 +===== Tags =====
 +[[meta:tags|How to add tags]]
 +{{tag>AR7241 4Flash 32RAM}}