Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:rosewill:rnx-n300rt [2018/02/20 20:21] – ↷ Links adapted because of a move operation toh:rosewill:rnx-n300rt [2019/02/23 17:32] – fixed IP range sudoman
Line 75: Line 75:
  
   * The router is now in failsafe mode and can be reached by telnet at 192.168.1.1 with no username or password required   * The router is now in failsafe mode and can be reached by telnet at 192.168.1.1 with no username or password required
-    * see [[docs:user-guide:troubleshooting:failsafe_and_factory_reset]] for more, including how to mount the usual file system+    * see [[docs:guide-user:troubleshooting:failsafe_and_factory_reset]] for more, including how to mount the usual file system
  
 ==== Recover from flash of bad image on a ThinkPenguin-supplied router ==== ==== Recover from flash of bad image on a ThinkPenguin-supplied router ====
Line 83: Line 83:
 Stop network manager and dhcp and whatever gives you a dynamically set address. Give yourself the static IP of 192.168.1.2/24. Connect the router via the first LAN port. Turn on the router. You might not need to press and hold the reset button during boot. Optionally run: Stop network manager and dhcp and whatever gives you a dynamically set address. Give yourself the static IP of 192.168.1.2/24. Connect the router via the first LAN port. Turn on the router. You might not need to press and hold the reset button during boot. Optionally run:
  
-    nmap 192.168.0.0/24+    nmap 192.168.1.0/24
  
 You should see that an http port is open on the router. Go to [[http://192.168.1.1]] in your browser. Select the proper image and upload it. Wait for the router to reboot and for lights to blink like normal. You should see that an http port is open on the router. Go to [[http://192.168.1.1]] in your browser. Select the proper image and upload it. Wait for the router to reboot and for lights to blink like normal.
  
  • Last modified: 2021/01/30 18:52
  • by sudoman