User Tools

Site Tools


toh:ravpower:ravpower_wd007

RavPower WD007

Under Construction!
This page is currently under construction. You can edit the article to help completing it.

Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.

FIXME Any text with a light background (like this one) provides instructions for creating the Details Page. When you have filled in correct/useful information (instead of any template that's there) remove the instructions, as well as the <WRAP> that encloses it.

Generic Router

FIXME

Getting started with a new Device Page

  1. This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that you have to fill it with life and information.
  2. There are several “fixme” tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness.
  3. When there are no more “fixme” tags left, delete this one too, along with the <WRAP> that encloses it.

Keep the articles modular

  • Please include only model specific information, omit bla,bla and put everything generic into separate articles
  • If you have no time to write certain stuff, link to docs
  • base-system should lead the way, do not explain this again
  • DO NOT provide a complete howto here! Instead groom the general documentation.

Supported Versions

FIXME

  1. The tables below are automatically generated, once the correct filters for Brand and Model are set.
  2. If the tables below show information for RavPower WD007 , everything is OK and you can delete this text and the <WRAP> that encloses it.
  3. If the tables below contain “Nothing found”, it means that either
    1. the dataentry page for RavPower WD007 is missing. Please create a new dataentry page first, then reload this page. The tables should then contain $something. If they do, delete this text and the <WRAP> that encloses it.
    2. filters are not set correctly → Please edit this section and adjust the filters with the proper Brand and Model. Just try, it's easy. The tables should then contain $something. If they do, delete this text and the <WRAP> that encloses it.
  4. If the tables still contain “Nothing found”: Don't panic, calm down, take a deep breath and contact a wiki admin (tmomas) for help.
Unsupported Functions
Nothing found

Experimental Versions

None at this time.

Hardware Highlights

Installation

Flash Layout

FIXME Find out flash layout, then add the flash layout table here (copy, paste, modify the example).

Please check out the article Flash layout. It contains examples and explanations that describe how to document the flash layout.

Stock Firmware

Partitions from “cat /proc/mtd”:

dev:    size   ​erasesize ​ name
mtd0: 01000000 00010000 "ALL"
mtd1: 00030000 00010000 "Bootloader"
mtd2: 00010000 00010000 "Config"
mtd3: 00010000 00010000 "Factory"
mtd4: 00180000 00010000 "Kernel_RootFS"
mtd5: 00010000 00010000 "params"
mtd6: 00010000 00010000 "user_backup"
mtd7: 00010000 00010000 "user"
mtd8: 00df0000 00010000 "Rootfs"
mtd9: 00010000 00010000 "Mode"
Layer0 mtd0
ALL
16 384KiB
Layer1 mtd1
Bootloader
192KiB
mtd2
Config
64KiB
mtd3
Factory
64KiB
mtd4
Kernel_RootFS
1536KiB
mtd5
params
64KiB
mtd6
user_backup
64KiB
mtd7
user
64KiB
mtd8
Rootfs
14272KiB
mtd9
Mode
64KiB

OEM easy installation

FIXME The instructions below are for Broadcom devices and only serve as an example.
Remove / modify them if they do not apply to this particular device!

This section deals with

  • How you install OpenWrt from a device freshly opened
  • The steps required such as reset to factory defaults if the device has already been configured

Note: Reset router to factory defaults if it has been previously configured.

  • Browse to http://192.168.1.1/Upgrade.asp
  • Upload .bin file to router
  • Wait for it to reboot
  • Telnet to 192.168.1.1 and set a root password, or browse to http://192.168.1.1 if LuCI is installed.

OEM installation using the TFTP method

Specific values needed for tftp

FIXME Enter values for “FILL-IN” below

Bootloader tftp server IPv4 address FILL-IN
Bootloader MAC address (special) FILL-IN
Firmware tftp image Latest OpenWrt release (NOTE: Name must contain “tftp”)
TFTP transfer window FILL-IN seconds
TFTP window start approximately FILL-IN seconds after power on
TFTP client required IP address FILL-IN

Upgrading OpenWrt

generic.sysupgrade

FIXME These are generic instructions. Update with your router's specifics.

LuCI Web Upgrade Process

  • Browse to http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/ LuCI Upgrade URL
  • Upload image file for sysupgrade to LuCI
  • Wait for reboot

Terminal Upgrade Process

If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line. There are two command line methods for upgrading:

  • sysupgrade
  • mtd

Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.

sysupgrade

  • Login as root via SSH on 192.168.1.1, then enter the following commands:
cd /tmp
wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
sysupgrade /tmp/xxx.abc

mtd

If sysupgrade does not support this router, use mtd.

  • Login as root via SSH on 192.168.1.1, then enter the following commands:
cd /tmp
wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
mtd write /tmp/xxx.abc linux && reboot

Debricking

Failsafe mode

Basic configuration

Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.

Specific Configuration

FIXME Please fill in real values for this device, then remove the EXAMPLEs

Network interfaces

The default network configuration is:

Interface Name Description Default configuration
br-lan EXAMPLE LAN & WiFi EXAMPLE 192.168.1.1/24
vlan0 (eth0.0) EXAMPLE LAN ports (1 to 4) EXAMPLE None
vlan1 (eth0.1) EXAMPLE WAN port EXAMPLE DHCP
wl0 EXAMPLE WiFi EXAMPLE Disabled

Switch Ports (for VLANs)

FIXME Please fill in real values for this device, then remove the EXAMPLEs

Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on.

Port Switch port
Internet (WAN) EXAMPLE 4
LAN 1 EXAMPLE 3
LAN 2 EXAMPLE 2
LAN 3 EXAMPLE 1
LAN 4 EXAMPLE 0

Buttons

hardware.button on howto use and configure the hardware button(s). Here, we merely name the buttons, so we can use them in the above Howto.

FIXME Please fill in real values for this device, then remove the EXAMPLEs

The RavPower WD007 has the following buttons:

BUTTON Event
EXAMPLE Reset reset
EXAMPLE Secure Easy Setup ses
EXAMPLE No buttons at all. -

Hardware

Info

FIXME

  1. This table is automatically generated, once the correct filters for Brand and Model are set.
  2. If you see “Nothing.” instead of a table, please edit this section and adjust the filters with the proper Brand and Model. Just try, it's easy.
  3. If you still don't see a table here, or a table filled with '¿': Is there already a Techdata page available for RavPower WD007 ? If not: Create one.
  4. If you see a table with the desired device data, everything is OK and you can delete this text and the <WRAP> that encloses it.
  5. If it still doesn't work: Don't panic, calm down, take a deep breath and contact a wiki admin (tmomas) for help.
Nothing.

Photos

Front:
View of Ravpower WD007

Left:
View of Ravpower WD007

Right:
View of Ravpower WD007

top:
View of Ravpower WD007

Under:
View of Ravpower WD007

Down:
View of Ravpower WD007

Opening the case

Note: This will void your warranty!

FIXME Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, …

  • To remove the cover and open the device, do a/b/c

Main PCB:
Insert photo of PCB

Serial

port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:
Insert photo of PCB with markings for serial port

FIXME Replace EXAMPLE by real values.

Serial connection parameters
for RavPower WD007 @@Version@@
EXAMPLE 115200, 8N1

JTAG

port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port

Bootloader mods

Hardware mods

None so far.

Bootlogs

OEM bootlog

[ 1.460000] res[5]->start = 0 [ 1.464000] res[5]->end = 0 [ 1.468000] Switching to clocksource Ralink Systick timer [ 1.472000] NET: Registered protocol family 2 [ 1.480000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 1.492000] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 1.508000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 1.520000] TCP: Hash tables configured (established 2048 bind 2048) [ 1.532000] TCP reno registered [ 1.540000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 1.552000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 1.564000] NET: Registered protocol family 1 [ 1.572000] PCI: CLS 80 bytes, default 32 [ 1.572000] RT3xxx EHCI/OHCI init. [ 1.580000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.592000] msgmni has been set to 119 [ 1.600000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 1.616000] io scheduler noop registered (default) [ 1.624000] flash manufacture id: c8, device id 40 18 [ 1.632000] GD25Q128C(c8 40180000) (16384 Kbytes) [ 1.644000] mtd .name = raspi, .size = 0x01000000 (16M) .erasesize = 0x00010000 (64K) .numeraseregions = 0 [ 1.664000] Creating 10 MTD partitions on "raspi": [ 1.672000] 0x000000000000-0x000001000000 : "ALL" [ 1.680000] 0x000000000000-0x000000030000 : "Bootloader" [ 1.692000] 0x000000030000-0x000000040000 : "Config" [ 1.704000] 0x000000040000-0x000000050000 : "Factory" [ 1.716000] 0x000000050000-0x0000001d0000 : "Kernel_RootFS" [ 1.724000] 0x0000001d0000-0x0000001e0000 : "params" [ 1.736000] 0x0000001e0000-0x0000001f0000 : "user_backup" [ 1.748000] 0x0000001f0000-0x000000200000 : "user" [ 1.756000] 0x000000200000-0x000000ff0000 : "Rootfs" [ 1.768000] 0x000000ff0000-0x000001000000 : "Mode" [ 1.996000] Reset button driver registered [ 2.004000] vs_pio_major = 100 [ 2.012000] vs_pio_major = 100 [ 2.016000] vs pio driver started! [ 2.024000] ====================== flag=1 [ 2.032000] vstinfo: Module loaded. [ 2.040000] start register I2C timer. [ 2.048000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 2.060000] serial8250: ttyS0 at MMIO 0x10000d00 (irq = 21) is a 16550A [ 2.072000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A [ 2.092000] brd: module loaded [ 2.100000] loop: module loaded [ 2.108000] rdm_major = 253 [ 2.112000] GMAC1_MAC_ADRH -- : 0x0000001c [ 2.120000] GMAC1_MAC_ADRL -- : 0xc23acbbc [ 2.128000] Ralink APSoC Ethernet Driver Initilization. v3.1 512 rx/tx descriptors allocated, mtu = 1500! [ 2.148000] GMAC1_MAC_ADRH -- : 0x0000001c [ 2.156000] GMAC1_MAC_ADRL -- : 0xc23acbbc [ 2.164000] PROC INIT OK! [ 2.168000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.212000] FM_OUT value: u4FmOut = 0(0x00000000) [ 2.228000] FM_OUT value: u4FmOut = 132(0x00000084) [ 2.236000] FM detection done! loop = 1 [ 2.252000] SR calibration value u1SrCalVal = 6 [ 2.360000] rt3xxx-ehci rt3xxx-ehci: Ralink EHCI Host Controller [ 2.372000] rt3xxx-ehci rt3xxx-ehci: new USB bus registered, assigned bus number 1 [ 2.412000] rt3xxx-ehci rt3xxx-ehci: irq 18, io mem 0x101c0000 [ 2.432000] rt3xxx-ehci rt3xxx-ehci: USB 0.0 started, EHCI 1.00 [ 2.444000] hub 1-0:1.0: USB hub found [ 2.448000] hub 1-0:1.0: 1 port detected [ 2.460000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.492000] rt3xxx-ohci rt3xxx-ohci: RT3xxx OHCI Controller [ 2.500000] rt3xxx-ohci rt3xxx-ohci: new USB bus registered, assigned bus number 2 [ 2.516000] rt3xxx-ohci rt3xxx-ohci: irq 18, io mem 0x101c1000 [ 2.588000] hub 2-0:1.0: USB hub found [ 2.596000] hub 2-0:1.0: 1 port detected [ 2.604000] Initializing USB Mass Storage driver... [ 2.612000] usbcore: registered new interface driver usb-storage [ 2.624000] USB Mass Storage support registered. [ 2.632000] nf_conntrack version 0.5.0 (957 buckets, 3828 max) [ 2.644000] IPVS: Registered protocols () [ 2.652000] IPVS: Connection hash table configured (size=4096, memory=32Kbytes) [ 2.668000] IPVS: ipvs loaded. [ 2.676000] GRE over IPv4 demultiplexor driver [ 2.684000] ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Restricted Cone [ 2.696000] TCP cubic registered [ 2.704000] NET: Registered protocol family 17 [ 2.712000] L2TP core driver, V2.0 [ 2.720000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> [ 2.732000] All bugs added by David S. Miller <davem@redhat.com> [ 2.780000] SQUASHFS error: Xattrs in filesystem, these will be ignored [ 2.796000] VFS: Mounted root (squashfs filesystem) readonly on device 31:8. [ 2.808000] Freeing unused kernel memory: 164k freed [ 2.892000] usb 1-1: new high speed USB device using rt3xxx-ehci and address 2 [ 3.268000] hub 1-1:1.0: USB hub found [ 3.320000] hub 1-1:1.0: 4 ports detected [ 4.068000] Algorithmics/MIPS FPU Emulator v1.5 [ 4.496000] Send_Cmd : 0x41 [ 4.552000] Send_Cmd : 0x41 [ 4.608000] Send_Cmd : 0x41 [ 4.664000] Send_Cmd : 0x41 [ 4.720000] Send_Cmd : 0x41 [ 7.008000] mode = 1 [ 9.696000] [ 9.696000] [ 9.696000] === pAd = c042d000, size = 1163616 === [ 9.696000] [ 9.712000] <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x [ 9.728000] <-- RTMPAllocAdapterBlock, Status=0 [ 9.736000] RtmpChipOpsHook(492): Not support for HIF_MT yet! [ 9.748000] mt7628_init()--> [ 9.752000] mt7628_init(FW(8a00), HW(8a01), CHIPID(7628)) [ 9.764000] e2.bin mt7628_init(1117)::(2), pChipCap->fw_len(63056) [ 9.776000] mt_bcn_buf_init(218): Not support for HIF_MT yet! [ 9.788000] <--mt7628_init() [ 10.156000] tntfs: module license 'Commercial. For support email ntfs-support@tuxera.com.' taints kernel. [ 10.176000] Disabling lock debugging due to kernel taint [ 10.224000] Tuxera NTFS driver 3014.4.29 [Flags: R/W MODULE]. [ 10.424000] Tuxera exFAT driver version 3014.1.24 [Flags: R/W MODULE]. [ 10.532000] Tuxera HFS+ driver 3014.6.14 [ 10.552000] Send_Cmd : 0x41 [ 10.608000] Send_Cmd : 0x41 [ 10.664000] Send_Cmd : 0x41 [ 10.720000] Send_Cmd : 0x41 [ 10.776000] Send_Cmd : 0x41 [ 15.228000] TX_BCN DESC a3094000 size = 320 [ 15.236000] RX[0] DESC a3098000 size = 2048 [ 15.248000] RX[1] DESC a3099000 size = 1024 [ 15.264000] cfg_mode=9 [ 15.272000] cfg_mode=9 [ 15.276000] wmode_band_equal(): Band Equal! [ 15.288000] APSDCapable[0]=0 [ 15.292000] APSDCapable[1]=0 [ 15.296000] APSDCapable[2]=0 [ 15.304000] APSDCapable[3]=0 [ 15.308000] APSDCapable[4]=0 [ 15.316000] APSDCapable[5]=0 [ 15.320000] APSDCapable[6]=0 [ 15.328000] APSDCapable[7]=0 [ 15.332000] APSDCapable[8]=0 [ 15.336000] APSDCapable[9]=0 [ 15.344000] APSDCapable[10]=0 [ 15.348000] APSDCapable[11]=0 [ 15.356000] APSDCapable[12]=0 [ 15.360000] APSDCapable[13]=0 [ 15.368000] APSDCapable[14]=0 [ 15.372000] APSDCapable[15]=0 [ 15.380000] default ApCliAPSDCapable[0]=0 [ 15.588000] Key1Str is Invalid key length(0) or Type(1) [ 15.596000] Key2Str is Invalid key length(0) or Type(0) [ 15.608000] Key3Str is Invalid key length(0) or Type(0) [ 15.620000] Key4Str is Invalid key length(0) or Type(0) [ 15.672000] RTMPSetDefaultChannel() : default channel to 1 [ 15.684000] load fw image from fw_header_image [ 15.692000] AndesMTLoadFwMethod1(2174)::pChipCap->fw_len(63056) [ 15.704000] FW Version:_e2_mp [ 15.712000] FW Build Date:20150211175503 [ 15.720000] CmdAddressLenReq:(ret = 0) [ 15.728000] CmdFwStartReq: override = 1, address = 1048576 [ 15.736000] CmdStartDLRsp: WiFI FW Download Success [ 15.748000] MtAsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC) [ 15.760000] efuse_probe: efuse = 10000002 [ 15.768000] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=4 [ 15.780000] RtmpEepromGetDefault::e2p_dafault=2 [ 15.788000] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 2 [ 15.804000] NVM is FLASH mode [ 15.808000] 1. Phy Mode = 14 [ 15.976000] Country Region from e2p = ffff [ 15.984000] tssi_1_target_pwr_g_band = 28 [ 15.992000] 2. Phy Mode = 14 [ 16.000000] 3. Phy Mode = 14 [ 16.004000] NICInitPwrPinCfg(11): Not support for HIF_MT yet! [ 16.016000] NICInitializeAsic(651): Not support rtmp_mac_sys_reset () for HIF_MT yet! [ 16.032000] mt_mac_init()--> [ 16.036000] MtAsicInitMac()--> [ 16.044000] mt7628_init_mac_cr()--> [ 16.052000] MtAsicSetMacMaxLen(1241): Set the Max RxPktLen=1024! [ 16.064000] <--mt_mac_init() [ 16.068000] WTBL Segment 1 info: [ 16.076000] MemBaseAddr/FID:0x28000/0 [ 16.084000] EntrySize/Cnt:32/128 [ 16.088000] WTBL Segment 2 info: [ 16.096000] MemBaseAddr/FID:0x40000/0 [ 16.104000] EntrySize/Cnt:64/128 [ 16.112000] WTBL Segment 3 info: [ 16.116000] MemBaseAddr/FID:0x42000/64 [ 16.124000] EntrySize/Cnt:64/128 [ 16.132000] WTBL Segment 4 info: [ 16.140000] MemBaseAddr/FID:0x44000/128 [ 16.148000] EntrySize/Cnt:32/128 [ 16.152000] AntCfgInit(2876): Not support for HIF_MT yet! [ 16.164000] MCS Set = ff ff 00 00 01 [ 16.172000] MtAsicSetChBusyStat(826): Not support for HIF_MT yet! [ 16.664000] CmdSlotTimeSet:(ret = 0) [ 18.872000] MtAsicSetRalinkBurstMode(2919): Not support for HIF_MT yet! [ 18.884000] MtAsicSetPiggyBack(763): Not support for HIF_MT yet! [ 18.920000] MtAsicSetTxPreamble(2898): Not support for HIF_MT yet! [ 18.936000] MtAsicAddSharedKeyEntry(1308): Not support for HIF_MT yet! [ 18.948000] MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xf0 [ 18.960000] Main bssid = 00:1c:c2:3a:cb:bc [ 18.968000] <==== rt28xx_init, Status=0 [ 18.976000] mt7628_set_ed_cca: TURN ON EDCCA mac 0x10618 = 0xd7e87d10 [ 18.992000] WiFi Startup Cost (ra0): 3.764s [ 19.432000] AddTxSType: already registered TxSType (PID = 32, Format = 0 [ 19.456000] Raeth v3.1 (Tasklet) [ 19.464000] [ 19.464000] phy_tx_ring = 0x02eee000, tx_ring = 0xa2eee000 [ 19.476000] [ 19.476000] phy_rx_ring0 = 0x02ef0000, rx_ring0 = 0xa2ef0000 [ 19.504000] GMAC1_MAC_ADRH -- : 0x0000001c [ 19.512000] GMAC1_MAC_ADRL -- : 0xc23acbbc [ 19.524000] RT305x_ESW: Link Status Changed [ 19.756000] device eth2 entered promiscuous mode [ 19.804000] switch register base addr to system register 0xb0000000 [ 19.820000] 0x5540555 [ 19.828000] write offset 0x64, value 0x5540555 [ 19.988000] device ra0 entered promiscuous mode [ 20.072000] device eth2.1 entered promiscuous mode [ 20.480000] br0: port 2(eth2.1) entering learning state [ 20.492000] br0: port 2(eth2.1) entering learning state [ 20.500000] br0: port 1(ra0) entering learning state [ 20.512000] br0: port 1(ra0) entering learning state [ 21.492000] br0: port 2(eth2.1) entering forwarding state [ 21.512000] br0: port 1(ra0) entering forwarding state [ 23.216000] cmd = 7, arg = 1 [ 23.464000] cmd = 6, arg = 3 [ 23.480000] cmd = 6, arg = 3 [ 23.504000] cmd = 6, arg = 0 [ 23.632000] udevd (1232): /proc/1232/oom_adj is deprecated, please use /proc/1232/oom_score_adj instead. [ 23.688000] udevd version 125 started [ 29.252000] br0: port 2(eth2.1) entering forwarding state [ 29.264000] br0: port 1(ra0) entering forwarding state [ 29.280000] device eth2.1 left promiscuous mode [ 29.288000] br0: port 2(eth2.1) entering disabled state [ 29.300000] device ra0 left promiscuous mode [ 29.308000] br0: port 1(ra0) entering disabled state [ 29.480000] device eth2 left promiscuous mode [ 29.712000] device eth2 entered promiscuous mode [ 29.724000] switch register base addr to system register 0xb0000000 [ 29.740000] 0x5540555 [ 29.748000] write offset 0x64, value 0x5540555 [ 29.876000] device ra0 entered promiscuous mode [ 30.104000] AddTxSType: already registered TxSType (PID = 32, Format = 0 [ 30.272000] br0: port 2(eth2) entering learning state [ 30.284000] br0: port 2(eth2) entering learning state [ 30.292000] br0: port 1(ra0) entering learning state [ 30.304000] br0: port 1(ra0) entering learning state [ 31.284000] br0: port 2(eth2) entering forwarding state [ 31.304000] br0: port 1(ra0) entering forwarding state [ 54.460000] Rcv Wcid(1) AddBAReq [ 54.464000] Start Seq = 00000000 [ 54.496000] AP SETKEYS DONE - WPA2, AuthMode(7)=WPA2PSK, WepStatus(6)=AES, GroupWepStatus(4)=TKIP [ 54.496000] [ 54.924000] AndesSendCmdMsg: Command type = ed, Extension command type = 27 [ 54.936000] BUG: AndesSendCmdMsg is called from invalid context [ 59.824000] Rcv Wcid(1) AddBAReq [ 59.828000] Start Seq = 00000000


OpenWrt bootlog

COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING


Notes

Space for additional notes, links to forum threads or other resources.

Tags

FIXME Add tags below, then remove this fixme.

How to add tags

toh/ravpower/ravpower_wd007.txt · Last modified: 2018/12/21 16:54 by badz