Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revisionBoth sides next revision
toh:qihoo:360t7_1.0 [2024/05/01 07:26] – Add OEM bootlog 981213toh:qihoo:360t7_1.0 [2024/05/01 07:27] – Add OpenWrt bootlog 981213
Line 1998: Line 1998:
 ==== OpenWrt bootlog ==== ==== OpenWrt bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</nowiki>+<nowiki> 
 +F0: 102B 0000 
 +FA: 1040 0000 
 +FA: 1040 0000 [0200] 
 +F9: 0000 0000 
 +V0: 0000 0000 [0001] 
 +00: 0000 0000 
 +BP: 2400 0041 [0000] 
 +G0: 1190 0000 
 +EC: 0000 0000 [1000] 
 +T0: 0000 0239 [010F] 
 +Jump to BL 
 + 
 +NOTICE:  BL2: v2.7(release):OpenWrt v2022-08-31-75393484-1 (mt7981-spim-nand-ddr3) 
 +NOTICE:  BL2: Built : 20:00:48, May 31 2023 
 +NOTICE:  WDT: disabled 
 +NOTICE:  EMI: Using DDR3 settings 
 +NOTICE:  EMI: Detected DRAM size: 256MB 
 +NOTICE:  EMI: complex R/W mem test passed 
 +NOTICE:  CPU: MT7981 (1300MHz) 
 +NOTICE:  SPI_NAND parses attributes from parameter page. 
 +NOTICE:  SPI_NAND Detected ID 0xc8 
 +NOTICE:  Page size 2048, Block size 131072, size 134217728 
 +NOTICE:  BL2: Booting BL31 
 +NOTICE:  BL31: v2.7(release):OpenWrt v2022-08-31-75393484-1 (mt7981-spim-nand-ddr3) 
 +NOTICE:  BL31: Built : 20:00:48, May 31 2023 
 + 
 + 
 +U-Boot 2023.04-OpenWrt-r23201-4c5a9da869 (May 31 2023 - 20:00:48 +0000) 
 + 
 +CPU:   MediaTek MT7981 
 +Model: Qihoo 360T7 
 +DRAM:  256 MiB 
 +Core:  40 devices, 18 uclasses, devicetree: embed 
 +Loading Environment from UBI... spi-nand: spi_nand spi_nand@0: GigaDevice SPI NAND was found. 
 +spi-nand: spi_nand spi_nand@0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 
 +Read 126976 bytes from volume ubootenv to 000000004f7c1c80 
 +Read 126976 bytes from volume ubootenv2 to 000000004f7e0cc0 
 +OK 
 +In:    serial@11002000 
 +Out:   serial@11002000 
 +Err:   serial@11002000 
 +reset button found 
 +Loading Environment from UBI... UBI partition 'ubi' already selected 
 +Read 126976 bytes from volume ubootenv to 000000004f7c1c80 
 +Read 126976 bytes from volume ubootenv2 to 000000004f7e0cc0 
 +OK 
 +Net:   eth0: ethernet@15100000 
 +No EFI system partition 
 +No EFI system partition 
 +Failed to persist EFI variables 
 + 
 + 
 +        ( ( ( OpenWrt ) ) )       U-Boot 2023.04-OpenWrt-r23201-4c5a9da869 (May 31 2023 - 20:00:48 +0000) 
 + 
 +      1. Run default boot command. 
 +      2. Boot system via TFTP. 
 +      3. Boot production system from NAND. 
 +      4. Boot recovery system from NAND. 
 +      5. Load production system via TFTP then write to NAND. 
 +      6. Load recovery system via TFTP then write to NAND. 
 +      7. Load BL31+U-Boot FIP via TFTP then write to NAND. 
 +      8. Load BL2 preloader via TFTP then write to NAND. 
 +      9. Reboot. 
 +      a. Reset all settings to factory defaults. 
 +      0. U-Boot console 
 + 
 + 
 +  Press UP/DOWN to move, ENTER to select, ESC to quit 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 +No size specified -> Using max size (9777152) 
 +Read 9777152 bytes from volume fit to 0000000046000000 
 + 
 +## Checking Image at 46000000 ... 
 +   FIT image found 
 +   FIT description: ARM64 OpenWrt FIT (Flattened Image Tree) 
 +    Image 0 (kernel-1) 
 +     Description:  ARM64 OpenWrt Linux-5.15.114 
 +     Type:         Kernel Image 
 +     Compression:  gzip compressed 
 +     Data Start:   0x46001000 
 +     Data Size:    5260909 Bytes = 5 MiB 
 +     Architecture: AArch64 
 +     OS:           Linux 
 +     Load Address: 0x48000000 
 +     Entry Point:  0x48000000 
 +     Hash algo:    crc32 
 +     Hash value:   23dca11a 
 +     Hash algo:    sha1 
 +     Hash value:   fc5a5d6e34cad1ca272effe15dc5d631c73de999 
 +    Image 1 (fdt-1) 
 +     Description:  ARM64 OpenWrt qihoo_360t7 device tree blob 
 +     Type:         Flat Device Tree 
 +     Compression:  uncompressed 
 +     Data Start:   0x46506000 
 +     Data Size:    32768 Bytes = 32 KiB 
 +     Architecture: AArch64 
 +     Hash algo:    crc32 
 +     Hash value:   86810e23 
 +     Hash algo:    sha1 
 +     Hash value:   37decafe69f87f0fecabb97e2e1db3a29f1cad99 
 +    Image 2 (rootfs-1) 
 +     Description:  ARM64 OpenWrt qihoo_360t7 rootfs 
 +     Type:         Filesystem Image 
 +     Compression:  uncompressed 
 +     Data Start:   0x4650e000 
 +     Data Size:    4354048 Bytes = 4.2 MiB 
 +     Hash algo:    crc32 
 +     Hash value:   4768dc7d 
 +     Hash algo:    sha1 
 +     Hash value:   bcb2ce46fe7631c08ba67448ac91667f09e0304b 
 +    Default Configuration: 'config-1' 
 +    Configuration 0 (config-1) 
 +     Description:  OpenWrt qihoo_360t7 
 +     Kernel:       kernel-1 
 +     FDT:          fdt-1 
 +     Loadables:    rootfs-1 
 +## Checking hash(es) for FIT Image at 46000000 ... 
 +   Hash(es) for Image 0 (kernel-1): crc32+ sha1+ 
 +   Hash(es) for Image 1 (fdt-1): crc32+ sha1+ 
 +   Hash(es) for Image 2 (rootfs-1): crc32+ sha1+ 
 +## Loading kernel from FIT Image at 46000000 ... 
 +   Using 'config-1' configuration 
 +   Trying 'kernel-1' kernel subimage 
 +     Description:  ARM64 OpenWrt Linux-5.15.114 
 +     Type:         Kernel Image 
 +     Compression:  gzip compressed 
 +     Data Start:   0x46001000 
 +     Data Size:    5260909 Bytes = 5 MiB 
 +     Architecture: AArch64 
 +     OS:           Linux 
 +     Load Address: 0x48000000 
 +     Entry Point:  0x48000000 
 +     Hash algo:    crc32 
 +     Hash value:   23dca11a 
 +     Hash algo:    sha1 
 +     Hash value:   fc5a5d6e34cad1ca272effe15dc5d631c73de999 
 +   Verifying Hash Integrity ... crc32+ sha1+ OK 
 +## Loading fdt from FIT Image at 46000000 ... 
 +   Using 'config-1' configuration 
 +   Trying 'fdt-1' fdt subimage 
 +     Description:  ARM64 OpenWrt qihoo_360t7 device tree blob 
 +     Type:         Flat Device Tree 
 +     Compression:  uncompressed 
 +     Data Start:   0x46506000 
 +     Data Size:    32768 Bytes = 32 KiB 
 +     Architecture: AArch64 
 +     Hash algo:    crc32 
 +     Hash value:   86810e23 
 +     Hash algo:    sha1 
 +     Hash value:   37decafe69f87f0fecabb97e2e1db3a29f1cad99 
 +   Verifying Hash Integrity ... crc32+ sha1+ OK 
 +   Booting using the fdt blob at 0x46506000 
 +Working FDT set to 46506000 
 +## Loading loadables from FIT Image at 46000000 ... 
 +   Trying 'rootfs-1' loadables subimage 
 +     Description:  ARM64 OpenWrt qihoo_360t7 rootfs 
 +     Type:         Filesystem Image 
 +     Compression:  uncompressed 
 +     Data Start:   0x4650e000 
 +     Data Size:    4354048 Bytes = 4.2 MiB 
 +     Hash algo:    crc32 
 +     Hash value:   4768dc7d 
 +     Hash algo:    sha1 
 +     Hash value:   bcb2ce46fe7631c08ba67448ac91667f09e0304b 
 +   Verifying Hash Integrity ... crc32+ sha1+ OK 
 +   Uncompressing Kernel Image 
 +   Loading Device Tree to 000000004e7e2000, end 000000004e7ecfff ... OK 
 +Working FDT set to 4e7e2000 
 +Add 'ramoops@42ff0000' node failed: FDT_ERR_EXISTS 
 + 
 +Starting kernel ... 
 + 
 +[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] 
 +[    0.000000] Linux version 5.15.114 (gch981213@guoguo-thinkbook) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r22396+773-95cae498b6) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Wed May 31 20:00:48 2023 
 +[    0.000000] Machine model: Qihoo 360T7 
 +[    0.000000] Zone ranges: 
 +[    0.000000]   DMA      [mem 0x0000000040000000-0x000000004fffffff] 
 +[    0.000000]   DMA32    empty 
 +[    0.000000]   Normal   empty 
 +[    0.000000] Movable zone start for each node 
 +[    0.000000] Early memory node ranges 
 +[    0.000000]   node   0: [mem 0x0000000040000000-0x0000000042ffffff] 
 +[    0.000000]   node   0: [mem 0x0000000043000000-0x000000004302ffff] 
 +[    0.000000]   node   0: [mem 0x0000000043030000-0x0000000047c7ffff] 
 +[    0.000000]   node   0: [mem 0x0000000047c80000-0x0000000047ffffff] 
 +[    0.000000]   node   0: [mem 0x0000000048000000-0x000000004fffffff] 
 +[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000004fffffff] 
 +[    0.000000] psci: probing for conduit method from DT. 
 +[    0.000000] psci: PSCIv1.1 detected in firmware. 
 +[    0.000000] psci: Using standard PSCI v0.2 function IDs 
 +[    0.000000] psci: MIGRATE_INFO_TYPE not supported. 
 +[    0.000000] psci: SMC Calling Convention v1.2 
 +[    0.000000] percpu: Embedded 17 pages/cpu s29592 r8192 d31848 u69632 
 +[    0.000000] pcpu-alloc: s29592 r8192 d31848 u69632 alloc=17*4096 
 +[    0.000000] pcpu-alloc: [0] 0 [0] 1 
 +[    0.000000] Detected VIPT I-cache on CPU0 
 +[    0.000000] CPU features: detected: GIC system register CPU interface 
 +[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration 
 +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64512 
 +[    0.000000] Kernel command line: 
 +[    0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear) 
 +[    0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) 
 +[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off 
 +[    0.000000] Memory: 240952K/262144K available (8128K kernel code, 894K rwdata, 2212K rodata, 448K init, 286K bss, 21192K reserved, 0K cma-reserved) 
 +[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 
 +[    0.000000] rcu: Hierarchical RCU implementation. 
 +[    0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. 
 +[    0.000000] Tracing variant of Tasks RCU enabled. 
 +[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. 
 +[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 
 +[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 
 +[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode 
 +[    0.000000] GICv3: 640 SPIs implemented 
 +[    0.000000] GICv3: 0 Extended SPIs implemented 
 +[    0.000000] GICv3: Distributor has no Range Selector support 
 +[    0.000000] Root IRQ handler: gic_handle_irq 
 +[    0.000000] GICv3: 16 PPIs implemented 
 +[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000 
 +[    0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys). 
 +[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns 
 +[    0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns 
 +[    0.000128] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000) 
 +[    0.000138] pid_max: default: 32768 minimum: 301 
 +[    0.000425] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear) 
 +[    0.000435] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear) 
 +[    0.001704] rcu: Hierarchical SRCU implementation. 
 +[    0.002052] smp: Bringing up secondary CPUs ... 
 +[    0.002365] Detected VIPT I-cache on CPU1 
 +[    0.002390] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000 
 +[    0.002418] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] 
 +[    0.002483] smp: Brought up 1 node, 2 CPUs 
 +[    0.002497] SMP: Total of 2 processors activated. 
 +[    0.002502] CPU features: detected: 32-bit EL0 Support 
 +[    0.002506] CPU features: detected: CRC32 instructions 
 +[    0.002533] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching 
 +[    0.002595] CPU: All CPU(s) started at EL2 
 +[    0.002607] alternatives: patching kernel code 
 +[    0.005576] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 
 +[    0.005599] futex hash table entries: 512 (order: 3, 32768 bytes, linear) 
 +[    0.005734] pinctrl core: initialized pinctrl subsystem 
 +[    0.006385] NET: Registered PF_NETLINK/PF_ROUTE protocol family 
 +[    0.006691] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations 
 +[    0.006720] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations 
 +[    0.006744] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations 
 +[    0.007078] thermal_sys: Registered thermal governor 'fair_share' 
 +[    0.007082] thermal_sys: Registered thermal governor 'bang_bang' 
 +[    0.007087] thermal_sys: Registered thermal governor 'step_wise' 
 +[    0.007091] thermal_sys: Registered thermal governor 'user_space' 
 +[    0.007253] ASID allocator initialised with 65536 entries 
 +[    0.007674] pstore: Registered ramoops as persistent store backend 
 +[    0.007681] ramoops: using 0x10000@0x42ff0000, ecc: 0 
 +[    0.017340] cryptd: max_cpu_qlen set to 1000 
 +[    0.019563] SCSI subsystem initialized 
 +[    0.019720] libata version 3.00 loaded. 
 +[    0.020825] clocksource: Switched to clocksource arch_sys_counter 
 +[    0.021461] NET: Registered PF_INET protocol family 
 +[    0.021551] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) 
 +[    0.021879] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) 
 +[    0.021896] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) 
 +[    0.021905] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear) 
 +[    0.021924] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) 
 +[    0.021953] TCP: Hash tables configured (established 2048 bind 2048) 
 +[    0.022023] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) 
 +[    0.022041] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) 
 +[    0.022150] NET: Registered PF_UNIX/PF_LOCAL protocol family 
 +[    0.022172] PCI: CLS 0 bytes, default 64 
 +[    0.024619] workingset: timestamp_bits=46 max_order=16 bucket_order=0 
 +[    0.028159] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +[    0.028174] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +[    0.062439] pwm-mediatek 10048000.pwm: clock: top fail: -517 
 +[    0.071469] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled 
 +[    0.072319] printk: console [ttyS0] disabled 
 +[    0.092488] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 18, base_baud = 2500000) is a ST16650V2 
 +[    0.706706] printk: console [ttyS0] enabled 
 +[    0.711721] cacheinfo: Unable to detect cache hierarchy for CPU 0 
 +[    0.720771] loop: module loaded 
 +[    0.725470] spi-nand spi0.0: ESMT SPI NAND was found. 
 +[    0.730520] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 
 +[    0.738883] 8 fixed-partitions partitions found on MTD device spi0.0 
 +[    0.745257] Creating 8 MTD partitions on "spi0.0": 
 +[    0.750039] 0x000000000000-0x000000100000 : "bl2" 
 +[    0.755856] 0x000000100000-0x000000180000 : "u-boot-env" 
 +[    0.761915] 0x000000180000-0x000000380000 : "Factory" 
 +[    0.768725] 0x000000380000-0x000000580000 : "fip" 
 +[    0.775362] 0x000000580000-0x000007180000 : "ubi" 
 +[    0.846946] 0x000007180000-0x000007280000 : "config" 
 +[    0.853081] 0x000007280000-0x000007300000 : "factory" 
 +[    0.858906] 0x000007300000-0x000007a00000 : "log" 
 +[    1.016225] mtk_soc_eth 15100000.ethernet: generated random MAC address 8a:40:d4:9c:26:7c 
 +[    1.025205] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc009480000, irq 82 
 +[    1.034776] i2c_dev: i2c /dev entries driver 
 +[    1.040268] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0) 
 +[    1.048970] NET: Registered PF_INET6 protocol family 
 +[    1.054729] Segment Routing with IPv6 
 +[    1.058410] In-situ OAM (IOAM) with IPv6 
 +[    1.062401] NET: Registered PF_PACKET protocol family 
 +[    1.067580] 8021q: 802.1Q VLAN Support v1.8 
 +[    1.072834] pstore: Using crash dump compression: deflate 
 +[    1.126894] mt7530-mdio mdio-bus:1f: configuring for fixed/2500base-x link mode 
 +[    1.136297] mt7530-mdio mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/tx 
 +[    1.149540] mt7530-mdio mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7531 PHY] (irq=91) 
 +[    1.170084] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7531 PHY] (irq=92) 
 +[    1.190266] mt7530-mdio mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7531 PHY] (irq=93) 
 +[    1.210414] mt7530-mdio mdio-bus:1f wan (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7531 PHY] (irq=94) 
 +[    1.221908] DSA: tree 0 setup 
 +[    1.225828] UBI: auto-attach mtd4 
 +[    1.229163] ubi0: default fastmap pool size: 40 
 +[    1.233713] ubi0: default fastmap WL pool size: 20 
 +[    1.238492] ubi0: attaching mtd4 
 +[    1.993880] ubi0: scanning is finished 
 +[    2.008485] ubi0: attached mtd4 (name "ubi", size 108 MiB) 
 +[    2.013986] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes 
 +[    2.020853] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 
 +[    2.027628] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 
 +[    2.034581] ubi0: good PEBs: 864, bad PEBs: 0, corrupted PEBs: 0 
 +[    2.040575] ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128 
 +[    2.047786] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0 
 +[    2.056125] ubi0: available PEBs: 0, total reserved PEBs: 864, PEBs reserved for bad PEB handling: 20 
 +[    2.065341] ubi0: background thread "ubi_bgt0d" started, PID 406 
 +[    2.067388] FIT: Selected configuration: "config-1" (OpenWrt qihoo_360t7) 
 +[    2.078153] FIT:           kernel sub-image 0x00001000..0x0050566c "kernel-1" (ARM64 OpenWrt Linux-5.15.114) 
 +[    2.088072] FIT:          flat_dt sub-image 0x00506000..0x0050dfff "fdt-1" (ARM64 OpenWrt qihoo_360t7 device tree blob) 
 +[    2.098943] FIT:       filesystem sub-image 0x0050e000..0x00934fff "rootfs-1" (ARM64 OpenWrt qihoo_360t7 rootfs) 
 +[    2.109198] FIT: selecting configured loadable "rootfs-1" to be root filesystem 
 +[    2.116494]  ubiblock0_2: p1(rootfs-1) 
 +[    2.116684] block ubiblock0_2: created from ubi0:2(fit) 
 +[    2.132746] VFS: Mounted root (squashfs filesystem) readonly on device 259:0. 
 +[    2.140058] Freeing unused kernel memory: 448K 
 +[    2.170872] Run /sbin/init as init process 
 +[    2.174958]   with arguments: 
 +[    2.177912]     /sbin/init 
 +[    2.180606]   with environment: 
 +[    2.183744]     HOME=/ 
 +[    2.186092]     TERM=linux 
 +[    2.409573] init: Console is alive 
 +[    2.413165] init: - watchdog - 
 +[    2.841817] kmodloader: loading kernel modules from /etc/modules-boot.d/
 +[    2.872664] kmodloader: done loading kernel modules from /etc/modules-boot.d/
 +[    2.890074] init: - preinit - 
 +[    3.020850] random: crng init done 
 +[    3.294378] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode 
 +[    3.302906] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx 
 +[    3.314183] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode 
 +Press the [f] key and hit [enter] to enter failsafe mode 
 +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level 
 +[    5.404514] UBIFS (ubi0:3): default file-system created 
 +[    5.410614] UBIFS (ubi0:3): Mounting in unauthenticated mode 
 +[    5.416372] UBIFS (ubi0:3): background thread "ubifs_bgt0_3" started, PID 489 
 +[    5.502068] UBIFS (ubi0:3): UBIFS: mounted UBI device 0, volume 3, name "rootfs_data" 
 +[    5.509897] UBIFS (ubi0:3): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes 
 +[    5.519818] UBIFS (ubi0:3): FS size: 92946432 bytes (88 MiB, 732 LEBs), max 743 LEBs, journal size 4698112 bytes (4 MiB, 37 LEBs) 
 +[    5.531464] UBIFS (ubi0:3): reserved for root: 4390089 bytes (4287 KiB) 
 +[    5.538065] UBIFS (ubi0:3): media format: w5/r0 (latest is w5/r0), UUID F2A900A9-503D-4997-B9F2-F6B23ECDC865, small LPT model 
 +[    5.551559] mount_root: overlay filesystem has not been fully initialized yet 
 +[    5.558893] mount_root: switching to ubifs overlay 
 +[    5.567371] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. 
 +[    5.578484] urandom-seed: Seed file not found (/etc/urandom.seed) 
 +[    5.635516] procd: - early - 
 +[    5.638469] procd: - watchdog - 
 +[    6.179070] procd: - watchdog - 
 +[    6.182476] procd: - ubus - 
 +[    6.238351] procd: - init - 
 +Please press Enter to activate this console. 
 +[    6.433575] urngd: v1.0.2 started. 
 +[    6.468118] kmodloader: loading kernel modules from /etc/modules.d/
 +[    6.482426] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433(alg:7fcdfc00)/0/0/
 +[    6.497760] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b 
 +[    6.505340] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36 
 +[    6.835214] mt7986-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Time: 20221208201745a 
 +[    6.835214] 
 +[    7.066131] mt7986-wmac 18000000.wifi: WM Firmware Version: ____000000, Build Time: 20221208201806 
 +[    7.180968] mt7986-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Build Time: 20221208202048 
 +[    9.503313] PPP generic driver version 2.4.2 
 +[    9.509117] NET: Registered PF_PPPOX protocol family 
 +[    9.518902] kmodloader: done loading kernel modules from /etc/modules.d/
 +[    9.689189] mtdblock: MTD device 'factory' is NAND, please consider using UBI block devices instead. 
 +[   10.596527] mtdblock: MTD device 'factory' is NAND, please consider using UBI block devices instead. 
 +[   15.866511] mtk_soc_eth 15100000.ethernet eth0: Link is Down 
 +[   15.885088] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode 
 +[   15.895597] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx 
 +[   15.904309] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 
 +[   15.911900] device eth0 entered promiscuous mode 
 +[   15.917058] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode 
 +[   15.928310] br-lan: port 1(lan1) entered blocking state 
 +[   15.933619] br-lan: port 1(lan1) entered disabled state 
 +[   15.940325] device lan1 entered promiscuous mode 
 +[   15.955580] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode 
 +[   15.967627] mt7530-mdio mdio-bus:1f lan2: Link is Up - 1Gbps/Full - flow control rx/tx 
 +[   15.976064] br-lan: port 2(lan2) entered blocking state 
 +[   15.981362] br-lan: port 2(lan2) entered disabled state 
 +[   15.989017] device lan2 entered promiscuous mode 
 +[   15.996966] br-lan: port 2(lan2) entered blocking state 
 +[   16.002237] br-lan: port 2(lan2) entered forwarding state 
 +[   16.007754] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready 
 +[   16.017325] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode 
 +[   16.028120] br-lan: port 3(lan3) entered blocking state 
 +[   16.033390] br-lan: port 3(lan3) entered disabled state 
 +[   16.040746] device lan3 entered promiscuous mode 
 +[   16.052931] mt7530-mdio mdio-bus:1f wan: configuring for phy/gmii link mode 
 +</nowiki>
 </WRAP>\\ </WRAP>\\
  
  • Last modified: 2024/12/18 14:50
  • by frollic