[OpenWrt Wiki] pcDuino 8 / Arches

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== pcDuino 8 / Arches ======

The board is more or less a copycat of the Merrii A80 Optimus board, with the difference that this one has NAND, instead of Optimus's eMMC. The board also goes by the alias of "Arches", above the original PCDuino 8 name.

WARNING: the PcDuino8-Uno and the PcDuino8-STB are H8-based boards, which is not supported yet.

==== Hardware highlights ====

^ Model ^ Ports ^
| pcDuino8 | 2x USB, 1x 10/100/1000 ethernet, MMC, 8GB NAND, HDMI, sound |

==== Availability ====

The board is available from various vendors, including the manufacturer itself, see [[http://www.pcduino.com/pcduino-v3/|here for pcDuino v3]].

Further details on the board: http://linux-sunxi.org/Pcduino8_A80_Board

==== Serial ====

You can use your usual serial levelshifter. Pinout is:

<code>

{GPIO pins}

{ETHERNET}
       GND  GND  VCC RX TX
        o   o   o   o   o 

</code>

If in doubt, refer to the Merrii A80 board (yes, the difference between the Merrii and the Linksprite board is the eMMC/NAND, and the white colouring of the board :P )

==== Status ====

   * Please refer to [[docs:techref:hardware:soc:soc.allwinner.sunxi#status|soc.allwinner.sunxi]] regarding the Allwinner A80 SOC.
   * Booting from SD

==== Installation process ====

Please refer to [[docs:techref:hardware:soc:soc.allwinner.sunxi#installing_openwrt|soc.allwinner.sunxi]].

==== dmesg ====

<WRAP bootlog>
<nowiki>
TBD
</nowiki>
</WRAP>\\

===== Tags =====
[[meta:tags|How to add tags]]
{{tag>sunxi gigabitethernet no_switch 0NIC 1NIC 0WNIC Serial ARM devboard Cortex-A7 Cortex-A15 ARMv7 unsupported}}

sunxi gigabitethernet no switch 0nic 1nic 0wnic serial arm devboard cortex-a7 cortex-a15 armv7 Unsupported devices