Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:netgear:wn2500rp_v1 [2019/12/27 16:19] – generic Broadcom Wifi warning walteravtoh:netgear:wn2500rp_v1 [2021/08/01 10:58] – Typos pdecat
Line 4: Line 4:
 {{section>meta:infobox:broadcom_wifi#infobox_for_dataentries&noheader&nofooter&noeditbutton}} {{section>meta:infobox:broadcom_wifi#infobox_for_dataentries&noheader&nofooter&noeditbutton}}
  
-Hardware info see [[https://forum.archive.openwrt.org/viewtopic.php?id=50571|openwrt forum archive]]. Currently OpenWrt 19.07-rc2 has some wifi support for both 2,and 5ghz using the BCM43236, but switch config is working (ports numbered incorrectfix see[[https://github.com/openwrt/openwrt/pull/2641|pull request]] )+Currently OpenWrt 19.07.2 has some wifi support for both 2,4GHz(channelscan) and 5GHz(AP mode) using the BCM43236.  
 + 
 +===== Supported Versions ===== 
 +---- datatable ---- 
 +cols    : BrandModelVersions, Supported Current Rel, OEM device homepage URL_url, OWrt Forum Topic URL_url, Device Techdata_pageid 
 +headers Brand, Model, Version, Current Release, OEM Info, Forum Topic, Technical Data 
 +align   : c,c,c,c,c,c,
 +filter  : Model=WN2500RP 
 +filter  : Versions=v1 
 +---- 
 + 
 + 
 +===== Hardware Highlights ===== 
 +---- datatable ---- 
 +cols    : Model, Versions, CPU, CPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4GHz, WLAN 5.0GHz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_ 
 +header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB 
 +align   : c,c,c,c,c,c,c,c,c,c,c,c,
 +filter  : Model=WN2500RP 
 +filter  : Versions=v1 
 +---- 
  
 ===== Installation ===== ===== Installation =====
-Flashing the device to OpenWrt can be done via stock Netgear firmware webinterface "Maintenance > Firmware upgrade" tested using version "V1.0.0.30_1.0.58" with current [[https://downloads.openwrt.org/releases/18.06.5/targets/brcm47xx/mips74k/openwrt-18.06.5-brcm47xx-mips74k-netgear-wn2500rp-v1-squashfs.chk|18.06.5]] image. If you reseted the stock firmware and are greeted with a netgear setupwizard and cannot find the maintenance firmware tab goto "http://192.168.1.250/start.htm". After succesfull flash the power led will stay solid amber/orange wait a couple of minutes to login 192.168.1.1. Upgrading from OpenWrt 18.06.5 to OpenWrt 19.07-rc2 works as aspected via webinterface. +---- datatable ---- 
 +cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url 
 +headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock 
 +align   : c,c,c 
 +filter  : Model=WN2500RP 
 +filter  : Versions=v1 
 +---- 
 + 
 +Flashing the device to OpenWrt can be done via stock Netgear firmware webinterface "Maintenance > Firmware upgrade" tested using version "V1.0.0.30_1.0.58" with current [[https://downloads.openwrt.org/releases/18.06.5/targets/brcm47xx/mips74k/openwrt-18.06.5-brcm47xx-mips74k-netgear-wn2500rp-v1-squashfs.chk|18.06.5]] image. If you reset the stock firmware and are greeted with a netgear setupwizard and cannot find the maintenance firmware tab goto "http://192.168.1.250/start.htm". After succesfull flash the power led will stay solid amber/orange wait a couple of minutes to login 192.168.1.1. Upgrading from OpenWrt 18.06.5 to OpenWrt 19.07-rc2 works as aspected via webinterface. 
  
 ===== Return to Factory Firmware ===== ===== Return to Factory Firmware =====
Line 13: Line 41:
  
 <code> <code>
-tfpt 192.168.1.1+tftp 192.168.1.1
 bin bin
 trace trace
Line 20: Line 48:
 After a couple of minutes router power led is solid green and running stock restored Netgear firmware. After a couple of minutes router power led is solid green and running stock restored Netgear firmware.
  
-===== Hardware details ===== +===== Forum Activity ===== 
-  * SoCBroadcom BCM5357 +[[https://forum.archive.openwrt.org/viewtopic.php?id=50571|OpenWrt forum archive]] 
-  * CPU: MIPS 74Kc V4.9 @ 266MHz +
-  * RAM: 64MB +
-  * FLASH: 8MB +
-  * SWITCH: 4port 100Mbit +
-  * RADIO0: BCM5358UB0 2,4GHz +
-  * RADIO1: BCM43236 5GHz @builtin USB interface +
-  * BUTTONS: 1x Restore Factory Settings 1x WPS+
  
 ===== LAN/WAN router ===== ===== LAN/WAN router =====
-This extender lacks a WAN port, but with OpenWrt webinterface "Network > Switch" one of the untagged LAN ports can be swapped to VLAN id2 to make that function as a WAN port. For instance change VLAN id 1, LAN PORT from "untagged" to "off" (make sure its not your current used port to administer the device) and change VLAN id 2, LAN PORT from "off" to "untagged". Than save and apply and you will have a working WAN and Router if you connect Internet to new WAN port (LAN 1)+This extender lacks a WAN port, but with OpenWrt webinterface "Network > Switch" one of the untagged LAN ports can be set to VLAN id 2 to make that port function as a WAN port. For instance change VLAN id 1, LAN PORT from "untagged" to "off" (make sure its not your current used port to administer the device) and add/change VLAN id 2, LAN PORT from "off" to "untagged". Than save and apply and you will have a working WAN if you connect Internet to new WAN port (LAN 4and set WAN interface to "eth0.2".
- +
-The port status for WAN we say "no-linkbut the untagged LAN 1 port you addressed to it will show correct link status +
  
 ===== BCM43236 802.11abgn Wireless Adapter ===== ===== BCM43236 802.11abgn Wireless Adapter =====
Line 130: Line 149:
 </code> </code>
  
-After reboot the builtin the usb-device did not come up again(lsusb shows only hub) and is not directly related to b43 since the following dmesg output was also visible with original openwrt image.+After reboot the builtin the usb-device did not come up again(lsusb shows only hub) and is not directly related to b43 since the following dmesg output was also visible with original OpenWrt image.
  
 <code> <code>
Line 196: Line 215:
  
 ===== Telnet stock firmware ===== ===== Telnet stock firmware =====
-The stock firmware has a telnet deamon that gets enabled by sending a magic packet, see unlock netgear[[https://openwrt.org/toh/netgear/telnet.console|telnet console]] for more info. Example console output of multiple commands:+The stock firmware has a telnet deamon that gets enabled by sending a magic packet, see unlock netgear[[toh:netgear:telnet.console|telnet console]] for more info. Example console output of multiple commands:
  
 <code> <code>
Line 2214: Line 2233:
 Using the reset button while using OpenWrt or powering on the device, may clear the "Device Name" and it will be reported in the status tab as "Unknown Device" which may also affect switch0 configuration if set by device name. Restoring to stock Netgear fixes this!  Using the reset button while using OpenWrt or powering on the device, may clear the "Device Name" and it will be reported in the status tab as "Unknown Device" which may also affect switch0 configuration if set by device name. Restoring to stock Netgear fixes this! 
  
 +
 +===== Tags =====
 +[[meta:tags|How to add tags]]
 +{{tag>BCM5357 8Flash 64RAM 4port FastEthernet 802.11abgn}}
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1