NETGEAR WAC124

Netgear advertise this product as a standalone access point. However, it also offers router functions. Includes 5x Gigabit Ethernet Ports (4x LAN, 1x WAN), 1x USB 2.0, WPS, and dual band 802.11bgn (2.4 GHz)/802.11ac (2.4GHz and 5GHz) WiFi with combined throughput of 2Gbps (AC2000 rated).

Netgear WAC124 front Netgear WAC124 back

dev size erasesize name
mtd0 00100000 00020000 “u-boot”
mtd1 00100000 00020000 “SC PART_MAP”
mtd2 00400000 00020000 “kernel”
mtd3 02800000 00020000 “ubi”
mtd4 01800000 00020000 “reserved0”
mtd5 00200000 00020000 “factory”
mtd6 03800000 00020000 “reserved1”

Note: Instructions are based on Netgear Firmware 1.0.4.2. They should work for newer versions as well.

  1. Disconnect the device from the Internet.
  2. Factory Reset the device.
  3. Connect to the device. Either via Ethernet cable to a LAN port or the default WiFI (NETGEAR-1). The default WiFI passphrase is sharedsecret. (Do NOT connect any cable into the WAN port)
  4. Browse to http://192.168.0.100. You should be forced into the setup wizard.
  5. Set a password for the root account.
  6. Skip the Setup Wizard. Confirm you really want to skip the setup wizard.
  7. Once at the main administration page, on the left menu, choose ADVANCED > Administration > Firmware Update. The Firmware Update page displays.
  8. In the manual update, Click Choose File. Choose the 'Firmware OpenWrt Install' squashfs-factory.img file from your computer. Click OK.
  9. The flashing to openwrt image completes in 3-5 minutes. The device should automatically reboot when flashing is complete. If not, wait 5 minutes and manually power off/power on the device.

The nmrpflash utility can be used to flash a new image via the bootloader. Both OEM firmware images and OpenWrt factory images can be installed in this fashion. For experienced users, this method will likely be easier and faster than the web-based method above.

You must connect to the LAN1 port to use nmrpflash. Note that the bootloader initializes the LAN1 port in 10/100 mode, which means you may need a crossover Ethernet cable if you are connecting the device directly to your computer.

  1. Login to your router's admin page
  2. Choose System > Backup/Flash Firmware from the menu at the top.
  3. Install the 'Firmware OpenWrt Upgrade' squashfs-sysupgrade.bin file.

If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line. There are two command line methods for upgrading:

  • sysupgrade
  • mtd

Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.

sysupgrade

  • Login as root via SSH on your device IP, then enter the following commands:
cd /tmp
wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
sysupgrade /tmp/xxx.abc

mtd

If sysupgrade does not support this router, use mtd.

  • Login as root via SSH on 192.168.1.1, then enter the following commands:
cd /tmp
wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
mtd write /tmp/xxx.abc linux && reboot

generic.debrick

Use NMRP to install official 1.0.4.2 release.

In failsafe mode you need to use a crossover cable and use the LAN1 port to get access to the device to start recovery.

Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.

The default network configuration is:

Interface Name Description Default configuration
br-lan LAN ports 1-4 DHCP
wan WAN port (Yellow) DHCP
wlan0 802.11bgn (2.4 GHz WiFi) DHCP, OpenWrt WiFi Network
wlan1 802.11nac (5.0 GHz WiFi) DHCP, OpenWrt WiFi Network
eth0 Generic interface for LAN ports DHCP
lan1 Bridged LAN port 1 into br-lan Bridged
lan2 Bridged LAN port 2 into br-lan Bridged
lan3 Bridged LAN port 3 into br-lan Bridged
lan4 Bridged LAN port 4 into br-lan Bridged

Numbers 1-4 are Ports 1-4 as labeled on the unit.

Port Switch port
Internet (WAN) wan (yellow)
LAN 1 LAN 1
LAN 2 LAN 2
LAN 3 LAN 3
LAN 4 LAN 4

The NETGEAR WAC124 has the following buttons:

BUTTON Event
Reset reset
Power Power on/off
WPS Wireless Protected Setup

Front:
Netgear WAC124 front

Back:
Netgear WAC124 back

Note: This will void your warranty!

Remove the three screws from the bottom of the case using a Torx T10 driver. One screw is located near the USB port, and the other two are underneath the front two rubber feet.

Next, pry open the case from the sides. There are molded latches on all four sides; they are very tight so most likely you will break at least one in the process.

Main PCB:
Insert photo of PCB

port.serial general information about the serial port, serial port cable, etc.

The serial port is exposed on J4. Before soldering the 4-pin header, you will need to bridge R53 and R54, located next to J4.

Pin UART usage
1 GND
2 TX
3 VCC
4 RX

Use 3.3V, 57600, 8N1.

port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port

Nota bene: This bootlog was captured from a device with multiple bad erase blocks in the NAND flash.

=================================================================== MT7621 stage1 code 10:33:11 (ASIC) CPU=50000000 HZ BUS=16666666 HZ ================================================================== Change MPLL source from XTAL to CR... do MEMPLL setting.. MEMPLL Config : 0x11100000 3PLL mode + External loopback === XTAL-40Mhz === DDR-1200Mhz === PLL2 FB_DL: 0x12, 1/0 = 668/356 49000000 PLL4 FB_DL: 0x12, 1/0 = 618/406 49000000 PLL3 FB_DL: 0x13, 1/0 = 549/475 4D000000 do DDR setting..[00320381] Apply DDR3 Setting...(use customer AC) 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120 -------------------------------------------------------------------------------- 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 000E:| 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 000F:| 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0010:| 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0011:| 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 rank 0 coarse = 15 rank 0 fine = 72 B:| 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 0 opt_dle value:9 DRAMC_R0DELDLY[018]=00002121 ================================================================== RXDQS perbit delay software calibration ================================================================== 1.0-15 bit dq delay value ================================================================== bit| 0 1 2 3 4 5 6 7 8 9 -------------------------------------- 0 | 11 8 12 11 11 7 11 5 3 8 10 | 6 12 7 8 6 8 -------------------------------------- ================================================================== 2.dqs window x=pass dqs delay value (min~max)center y=0-7bit DQ of every group input delay:DQS0 =33 DQS1 = 33 ================================================================== bitDQS0 bit DQS1 0 (1~65)33 8 (1~61)31 1 (1~60)30 9 (1~62)31 2 (1~65)33 10 (1~65)33 3 (1~64)32 11 (1~62)31 4 (1~64)32 12 (1~66)33 5 (1~65)33 13 (1~60)30 6 (1~65)33 14 (1~63)32 7 (1~64)32 15 (1~62)31 ================================================================== 3.dq delay value last ================================================================== bit| 0 1 2 3 4 5 6 7 8 9 -------------------------------------- 0 | 11 11 12 12 12 7 11 6 5 10 10 | 6 14 7 11 7 10 ================================================================== ================================================================== TX perbyte calibration ================================================================== DQS loop = 15, cmp_err_1 = ffff0000 dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1 dqs_perbyte_dly.last_dqsdly_pass[1]=15, finish count=2 DQ loop=15, cmp_err_1 = ffff0000 dqs_perbyte_dly.last_dqdly_pass[0]=15, finish count=1 dqs_perbyte_dly.last_dqdly_pass[1]=15, finish count=2 byte:0, (DQS,DQ)=(8,8) byte:1, (DQS,DQ)=(8,8) 20,data:88 [EMI] DRAMC calibration passed =================================================================== MT7621 stage1 code done CPU=50000000 HZ BUS=16666666 HZ =================================================================== U-Boot 1.1.3 (Aug 22 2018 - 14:51:38) Board: Ralink APSoC DRAM: 128 MB relocate_code Pointer at: 87fa8000 Config XHCI 40M PLL Allocate 16 byte aligned buffer: 87fdeeb0 Enable NFI Clock # MTK NAND # : Use HW ECC NAND ID [C2 F1 80 95 02] Device found in MTK table, ID: c2f1, EXT_ID: 809502 Support this Device in MTK table! c2f1 select_chip [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16 Signature matched and data read! load_fact_bbt success 1023 load fact bbt success [mtk_nand] probe successfully! mtd->writesize=2048 mtd->oobsize=64,mtd->erasesize=131072 devinfo.iowidth=8 .*** Warning - bad CRC, using default environment ============================================ Ralink UBoot Version: 5.0.0.0 -------------------------------------------- ASIC MT7621A DualCore (MAC to MT7530 Mode) DRAM_CONF_FROM: Auto-Detection DRAM_TYPE: DDR3 DRAM bus: 16 bit Xtal Mode=3 OCP Ratio=1/3 Flash component: NAND Flash Date:Aug 22 2018 Time:14:51:38 ============================================ icache: sets:256, ways:4, linesz:32 ,total:32768 dcache: sets:256, ways:4, linesz:32 ,total:32768 ##### The CPU freq = 880 MHZ #### estimate memory size =128 Mbytes #Reset_MT7530 set LAN/WAN LLLLW .. Please choose the operation: 1: Load system code to SDRAM via TFTP. 2: Load system code then write to Flash via TFTP. 3: Boot system code via Flash (default). 4: Entr boot command line interface. 7: Load Boot Loader code then write to Flash via Serial. 9: Load Boot Loader code then write to Flash via TFTP. default: 3 1 0 [31m****************************************** Uboot StandAlone Entry ******************************************[0m SC_DEBUG: Nand Partition Table Magic Found at 100000. .. *************************************************** Sercomm Boot Version 1.3.0.0, at Aug 22 2018, 14:51:35 *************************************************** Entering Firmware : Everything is OK. Enter NMRP_main 0x0000:94 a6 7e ee 12 4b Trying Eth0 (10/100-M) Waitting for RX_DMA_BUSY status Start... done ETH_STATE_ACTIVE!! Our ETH MAC: 0x0000:94 a6 7e ee 12 4b NMRP_FLASH_SIZE_buffer --> 03000000. NMRP:LISTENING Enter NMRP_handle_LISTENING_state ### No NMRP Server found ### check upgrade flag read flag_offs 05440000 flag value 0xff 3: System Boot system code via Flash. 0xbc200000 0xbc000000 0x200000 CLOSE ETH Clear Memory ## Booting image at bc200000 ... Image Name: Linux Kernel Image Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 3710837 Bytes = 3.5 MB Load Address: 80801000 Entry Point: 8080d1d0 ........................ranand_read: skip reading a fact bad block 380000 -> 3a0000 ................................. Verifying Checksum ... OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 8080d1d0) ... ## Giving linux memsize in MB, 128 Starting kernel ... LINUX started... THIS IS ASIC SDK 5.0.S.0 Linux version 2.6.36 (squitty@localhost.localdomain) (gcc version 4.6.3 (Buildroot 2012.11.1) ) #1 SMP Tue Apr 2 13:56:04 CST 2019 The CPU feqenuce set to 880 MHz GCMP present CPU revision is: 0001992f (MIPS 1004Kc) Software DMA cache coherency Determined physical RAM map: memory: 08000000 @ 00000000 (usable) Zone PFN ranges: DMA 0x00000000 -> 0x00000800 Normal 0x00000800 -> 0x00008000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00008000 Detected 3 available secondary CPU(s) PERCPU: Embedded 7 pages/cpu @812ee000 s7104 r8192 d13376 u65536 pcpu-alloc: s7104 r8192 d13376 u65536 alloc=16*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock3 console=ttyS0 PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes. Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes MIPS secondary cache 256kB, 8-way, linesize 32 bytes. Writing ErrCtl register=0000404e Readback ErrCtl register=0000404e Memory: 119668k/131072k available (6272k kernel code, 11404k reserved, 2781k data, 216k init, 0k highmem) Hierarchical RCU implementation. Verbose stalled-CPUs detection is disabled. NR_IRQS:128 Trying to install interrupt handler for IRQ24 Trying to install interrupt handler for IRQ25 Trying to install interrupt handler for IRQ22 Trying to install interrupt handler for IRQ9 Trying to install interrupt handler for IRQ10 Trying to install interrupt handler for IRQ11 Trying to install interrupt handler for IRQ12 Trying to install interrupt handler for IRQ13 Trying to install interrupt handler for IRQ14 Trying to install interrupt handler for IRQ16 Trying to install interrupt handler for IRQ17 Trying to install interrupt handler for IRQ18 Trying to install interrupt handler for IRQ19 Trying to install interrupt handler for IRQ20 Trying to install interrupt handler for IRQ21 Trying to install interrupt handler for IRQ23 Trying to install interrupt handler for IRQ26 Trying to install interrupt handler for IRQ27 Trying to install interrupt handler for IRQ28 Trying to install interrupt handler for IRQ15 Trying to install interrupt handler for IRQ8 Trying to install interrupt handler for IRQ29 Trying to install interrupt handler for IRQ30 Trying to install interrupt handler for IRQ31 console [ttyS1] enabled Calibrating delay loop... 575.48 BogoMIPS (lpj=1150976) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 launch: starting cpu1 launch: cpu1 gone! CPU revision is: 0001992f (MIPS 1004Kc) Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes. Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes MIPS secondary cache 256kB, 8-way, linesize 32 bytes. launch: starting cpu2 launch: cpu2 gone! CPU revision is: 0001992f (MIPS 1004Kc) Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes. Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes MIPS secondary cache 256kB, 8-way, linesize 32 bytes. launch: starting cpu3 launch: cpu3 gone! CPU revision is: 0001992f (MIPS 1004Kc) Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes. Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes MIPS secondary cache 256kB, 8-way, linesize 32 bytes. Brought up 4 CPUs Synchronize counters across 4 CPUs: done. NET: Registered protocol family 16 release PCIe RST: RALINK_RSTCTRL = 7000000 PCIE PHY initialize ***** Xtal 40MHz ***** start MT7621 PCIe register access RALINK_RSTCTRL = 7000000 RALINK_CLKCFG1 = 77ffeff8 *************** MT7621 PCIe RC mode ************* PCIE2 no card, disable it(RST&CLK) pcie_link status = 0x3 RALINK_RSTCTRL= 3000000 *** Configure Device number setting of Virtual PCI-PCI bridge *** RALINK_PCI_PCICFG_ADDR = 21007f2 -> 21007f2 PCIE0 enabled PCIE1 enabled interrupt enable status: 300000 Port 1 N_FTS = 1b105000 Port 0 N_FTS = 1b105000 config reg done init_rt2880pci done bio: create slab <bio-0> at 0 vgaarb: loaded SCSI subsystem initialized pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000) pci 0000:00:01.0: BAR 0: can't assign mem (size 0x80000000) pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff] pci 0000:00:00.0: BAR 1: set to [mem 0x60200000-0x6020ffff] (PCI address [0x60200000-0x6020ffff] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff] pci 0000:00:01.0: BAR 1: set to [mem 0x60210000-0x6021ffff] (PCI address [0x60210000-0x6021ffff] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit] pci 0000:01:00.0: BAR 0: set to [mem 0x60000000-0x600fffff 64bit] (PCI address [0x60000000-0x600fffff] pci 0000:00:00.0: PCI bridge to [bus 01-01] pci 0000:00:00.0: bridge window [io disabled] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] pci 0000:00:00.0: bridge window [mem pref disabled] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff] pci 0000:02:00.0: BAR 0: set to [mem 0x60100000-0x601fffff] (PCI address [0x60100000-0x601fffff] pci 0000:00:01.0: PCI bridge to [bus 02-02] pci 0000:00:01.0: bridge window [io disabled] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff] pci 0000:00:01.0: bridge window [mem pref disabled] PCI: Enabling device 0000:00:00.0 (0004 -> 0006) PCI: Enabling device 0000:00:01.0 (0004 -> 0006) BAR0 at slot 0 = 0 bus=0x0, slot = 0x0 res[0]->start = 0 res[0]->end = 0 res[1]->start = 60200000 res[1]->end = 6020ffff res[2]->start = 0 res[2]->end = 0 res[3]->start = 0 res[3]->end = 0 res[4]->start = 0 res[4]->end = 0 res[5]->start = 0 res[5]->end = 0 BAR0 at slot 1 = 0 bus=0x0, slot = 0x1 res[0]->start = 0 res[0]->end = 0 res[1]->start = 60210000 res[1]->end = 6021ffff res[2]->start = 0 res[2]->end = 0 res[3]->start = 0 res[3]->end = 0 res[4]->start = 0 res[4]->end = 0 res[5]->start = 0 res[5]->end = 0 bus=0x1, slot = 0x0, irq=0x4 res[0]->start = 60000000 res[0]->end = 600fffff res[1]->start = 0 res[1]->end = 0 res[2]->start = 0 res[2]->end = 0 res[3]->start = 0 res[3]->end = 0 res[4]->start = 0 res[4]->end = 0 res[5]->start = 0 res[5]->end = 0 bus=0x2, slot = 0x1, irq=0x18 res[0]->start = 60100000 res[0]->end = 601fffff res[1]->start = 0 res[1]->end = 0 res[2]->start = 0 res[2]->end = 0 res[3]->start = 0 res[3]->end = 0 res[4]->start = 0 res[4]->end = 0 res[5]->start = 0 res[5]->end = 0 Switching to clocksource Ralink Systick timer NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered UDP hash table entries: 128 (order: 0, 4096 bytes) UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) NET: Registered protocol family 1 4 CPUs re-calibrate udelay(lpj = 1167360) squashfs: version 4.0 (2009/01/31) Phillip Lougher fuse init (API version 7.15) SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem msgmni has been set to 233 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered (default) Ralink gpio driver initialized spidrv_major = 217 spdif_mod_init: start SPDIF module Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x1e000d00 (irq = 27) is a 16550A serial8250: ttyS1 at MMIO 0x1e000c00 (irq = 26) is a 16550A brd: module loaded MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error Allocate 16 byte aligned buffer: 81141310 Enable NFI Clock # MTK NAND # : Use HW ECC NAND ID [C2 F1 80 95 02, 00809502] Device not found, ID: c2f1 Not Support this Device! chip_mode=00000001 Support this Device in MTK table! c2f1 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xf1 (Unknown NAND 128MiB 3,3V 8-bit) [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16 Scanning device for bad blocks Bad eraseblock 28 at 0x000000380000 Bad eraseblock 352 at 0x000002c00000 Signature matched and data read! load_fact_bbt success 1023 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Go to read Magic at 100000 page: 200 SC_DEBUG: NAND Partition Table Magic Fount at 100000. page: 201 part 0,real_offset 00000000, real_length 00100000 page: 201 part 1,real_offset 00100000, real_length 00100000 page: 201 part 2,real_offset 00200000, real_length 00420000 page: 201 part 3,real_offset 00620000, real_length 02820000 page: 201 part 4,real_offset 02e40000, real_length 00200000 page: 201 part 5,real_offset 03040000, real_length 00200000 page: 201 part 6,real_offset 03240000, real_length 00200000 page: 201 part 7,real_offset 03440000, real_length 00200000 page: 201 part 8,real_offset 03640000, real_length 00200000 page: 201 part 9,real_offset 03840000, real_length 00200000 page: 201 part 10,real_offset 03a40000, real_length 00200000 page: 201 part 11,real_offset 03c40000, real_length 00200000 page: 201 part 12,real_offset 03e40000, real_length 00200000 page: 201 part 13,real_offset 04040000, real_length 00200000 page: 201 part 14,real_offset 04240000, real_length 00200000 page: 201 part 15,real_offset 04440000, real_length 00200000 page: 201 part 16,real_offset 04640000, real_length 00200000 page: 201 part 17,real_offset 04840000, real_length 00200000 page: 201 part 18,real_offset 04a40000, real_length 00200000 page: 201 part 19,real_offset 04c40000, real_length 00200000 page: 201 part 20,real_offset 04e40000, real_length 00200000 page: 201 part 21,real_offset 05040000, real_length 00200000 page: 201 part 22,real_offset 05240000, real_length 00200000 page: 201 part 23,real_offset 05440000, real_length 00200000 page: 201 part 24,real_offset 05640000, real_length 00200000 page: 201 part 25,real_offset 05840000, real_length 00200000 page: 201 part 26,real_offset 05a40000, real_length 00200000 page: 201 part 27,real_offset 05c40000, real_length 00200000 page: 201 part 28,real_offset 05e40000, real_length 02140000 Creating 29 MTD partitions on "MT7621-NAND": 0x000000000000-0x000000100000 : "Bootloader" 0x000000100000-0x000000200000 : "SC_PART_MAP" 0x000000200000-0x000000620000 : "Kernel" 0x000000620000-0x000002e40000 : "Rootfs" 0x000002e40000-0x000003040000 : "English UI" 0x000003040000-0x000003240000 : "ML1" 0x000003240000-0x000003440000 : "ML2" 0x000003440000-0x000003640000 : "ML3" 0x000003640000-0x000003840000 : "ML4" 0x000003840000-0x000003a40000 : "ML5" 0x000003a40000-0x000003c40000 : "ML6" 0x000003c40000-0x000003e40000 : "ML7" 0x000003e40000-0x000004040000 : "ML8" 0x000004040000-0x000004240000 : "ML9" 0x000004240000-0x000004440000 : "ML10" 0x000004440000-0x000004640000 : "ML11" 0x000004640000-0x000004840000 : "Factory" 0x000004840000-0x000004a40000 : "SC Private Data" 0x000004a40000-0x000004c40000 : "POT" 0x000004c40000-0x000004e40000 : "Traffic Meter" 0x000004e40000-0x000005040000 : "SC PID" 0x000005040000-0x000005240000 : "SC Nvram" 0x000005240000-0x000005440000 : "Ralink Nvram" 0x000005440000-0x000005640000 : "Reserved Block1" 0x000005640000-0x000005840000 : "Reserved Block2" 0x000005840000-0x000005a40000 : "Reserved Block3" 0x000005a40000-0x000005c40000 : "Reserved Block4" 0x000005c40000-0x000005e40000 : "Reserved Block5" 0x000005e40000-0x000007f80000 : "Reserved Block6" [mtk_nand] probe successfully! rdm_major = 253 GMAC1_MAC_ADRH -- : 0x0000000c GMAC1_MAC_ADRL -- : 0x4328805f Ralink APSoC Ethernet Driver Initilization. v3.1 1024 rx/tx descriptors allocated, mtu = 1500! GMAC1_MAC_ADRH -- : 0x0000000c GMAC1_MAC_ADRL -- : 0x43288032 PROC INIT OK! PPP generic driver version 2.4.2 PPP MPPE Compression module registered NET: Registered protocol family 24 PPTP driver version 0.8.5 IMQ driver loaded successfully. Hooking IMQ before NAT on PREROUTING. Hooking IMQ after NAT on POSTROUTING. register mt_drv === pAd = c0182000, size = 3653032 === <-- RTMPAllocAdapterBlock, Status=0 get_wdev_by_idx: invalid idx(0) pAd->PciHif.CSRBaseAddress =0xc0080000, csr_addr=0xc0080000! get_wdev_by_idx: invalid idx(0) RTMPInitPCIeDevice():device_id=0x7615 DriverOwn()::Try to Clear FW Own... DriverOwn()::Success to clear FW Own mt_pci_chip_cfg(): HWVer=0x8a10, FWVer=0x8a10, pAd->ChipID=0x7615 mt_pci_chip_cfg(): HIF_SYS_REV=0x76150001 RtmpChipOpsHook(493): Not support for HIF_MT yet! MACVersion=0x0 mt7615_init()--> Use 1st iPAiLNA default bin. Use 0st /etc_ro/wlan/MT7615E_EEPROM1.bin default bin. <--mt7615_init() ChipOpsMCUHook cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096 cut_through_token_list_init(): 87fa3208,87fa3208 cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096 cut_through_token_list_init(): 87fa3218,87fa3218 <-- RTMPAllocTxRxRingMemory, Status=0 get_wdev_by_idx: invalid idx(0) get_wdev_by_idx: invalid idx(0) get_wdev_by_idx: invalid idx(0) get_wdev_by_idx: invalid idx(0) get_wdev_by_idx: invalid idx(0) get_wdev_by_idx: invalid idx(0) get_wdev_by_idx: invalid idx(0) pci probe count=1 Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (1869 buckets, 7476 max) nf_conntrack_rtsp v0.6.21 loading IPVS: Registered protocols () IPVS: Connection hash table configured (size=4096, memory=32Kbytes) IPVS: ipvs loaded. GRE over IPv4 demultiplexor driver gre: can't add protocol nf_nat_rtsp v0.6.21 loading ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Restricted Cone TCP cubic registered NET: Registered protocol family 10 NOTIFY NOTIFY NOTIFY NOTIFY NOTIFY ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver NOTIFY NOTIFY NOTIFY NOTIFY NET: Registered protocol family 17 L2TP core driver, V2.0 PPPoL2TP kernel driver, V2.0 L2TP IP encapsulation support (L2TPv3) L2TP netlink interface L2TP ethernet pseudowire support (L2TPv3) 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly on device 31:3. Freeing unused kernel memory: 216k freed Algorithmics/MIPS FPU Emulator v1.5 init started: BusyBox v1.12.1 (2019-04-02 14:18:54 CST) starting pid 1, tty '': '/usr/etc/rcS' mount: mounting none on /dev/pts failed: No such file or directory mount: mounting none on /proc/bus/usb failed: No such file or directory mknod: /dev/fuse: File exists Welcome to _______ _______ ___ __ ____ _ _ ___ | ___ \| __ || | |__|| \ | || | / / | |___| || |__| || |__ __ | \| || |/ / | _ /| _ || || || |\ || \ |__| \__\|__| |__||______||__||_| \____||_|\___\ =System Architecture Department= [board_init/board_init.c::configure_mt7621_register():25] setting GPIO_MODE register [32m[SYSTEM]/sbin/reg s 0[0m switch register base addr to system register 0xbe000000 [32m[SYSTEM]/sbin/reg r 0x60[00xa05a8 m [32m[SYSTEM]/sbin/reg w 0x60 0xwrite offset 0x60, value 0xa05a8 a05a8[0m ^[[2;1;1;112;112;1;0x[32m[SYSTEM]/sbin/reg r 0x60[00xa05a8 m ^[[2;1;1;112;1[32m[SYSTEM]/bin/echo 1 > /proc/sysNOTIFY /net/ipv6/conf/aNOTIFY ll/disable_ipv6NOTIFY [0m 12;1;0xNOTIFY NOTIFY NOTIFY NOTIFY [32m[SYSTEM]/bin/echo ==============insmod start > /dev/console[0m ==============insmod start [32m[SYSTEM]/sbin/insmod /lib/modules/`uname -r`/kernel/drivers/char/i2c_drv.ko[0m i2cdrv_major = 218 [32m[SYSTEM]/sbin/insmod /lib/modules/led_pb_api.ko[0m led_pb_api: module license 'Sercomm' taints kernel. Disabling lock debugging due to kernel taint [32m[SYSTEM]/sbin/insmod /lib/modules/led_hw.koRegister LED ID <70> [0m Register LED ID <20> Register LED ID <40> Register LED ID <61> Register LED ID <62> Register LED ID <90> Register LED ID <91> [32m[SYSTEM]/sbin/insmod /lib/modules/2.6.30.9/kernel/fs/jbd2/jbd2.ko[0m insmod: can't read '/lib/modules/2.6.30.9/kernel/fs/jbd2/jbd2.ko': No such file or directory [32m[SYSTEM]/sbin/insmod /lib/modules/2.6.30.9/kernel/fs/ext4/ext4.ko[0m insmod: canetfilter dnshj choose interested dns queries module loaded ! n't read '/lib/modules/2.6.30.9/kernel/fs/ext4/ext4.ko': No such file or directory [32m[SYSTEM]/sbin/insmod /lib/modules/ipt_condition.ko[0m [32m[SYSTEM]/sbin/insmod /lib/modules/ipt_http_string.ko[0m [32m[SYSTEM]/sbin/insmod /lib/modules/ipt_dnshj.ko[0m [32m[SYSTEM]/sbin/insmod /lib/modules/ipt_DLOG.ko[0m [32m[SYSTEM]/sbin/insmod /lib/modules/ipt_macblock_dnshj.ko[0m insmod: can't read '/lib/modules/ipt_macblock_dnshj.ko': No such file or directory [32m[SYSTEM]/sbin/insmod /lib/modules/xt_ct_dir.ko[0m [32m[SYSTEM]/sbin/insmod /lib/modules/cnapt_core.ko[0m [32m[SYSTEM]/sbin/insmod /lib/modules/cnapt.ko[0m [32m[SYSTEM]/sbin/insmod /lib/modules/cpt.ko[0m [32m[SYSTEM]/sbin/insmod /lib/modules/cpm.ko[0m [32m[SYSTEM]/sbin/insmod /lib/modules/calg.ko[0m [32m[SYSTEM]/sbin/insmod /lib/modules/cdmz.ko[0m [32m[SYSTEM]/sbin/insmod /lib/modules/cudp.ko[0m [32m[SYSTEM]/sbin/insmod /lib/modules/hairpin.ko[0m [32m[SYSTEM]/sbin/insmod /lib/modules/natlimit.ko[0m [32m[SYSTEM]/sbin/insmod /lib/modules/jnl.ko[0m insmod: can't read '/lib/modules/jnl.ko': No such file or directory [32m[SYSTEM]/sbin/insmod /lib/modules/ufsd.ko[0m insmod: can't read 'init common module successful /lib/modules/ufsd.ko': No such file or directory [32m[SYSTEM]/insert firewall block module success sbin/insmod /lib/modules/arp_protect_enable.ko[0m [32m[SYSTEMfake source dos protect modules is inserted ]/sbin/insmod /lib/modules/common.ko[0m [32m[SYSTEM]/sbin/insmod /lib/modules/firewall_block.ko[0m [32m[SYSTEM]/sbin/insmod /lib/modules/fake_source_dos.ko[0m [32m[SYSTEM]/sbin/insmod /lib/modules/psd_and_special_udp_dos.ko[0m netfilter PSD and TCP/UDP Echo/Chargen Attack loaded [32m[SYSTEM]/sbin/insmod /lib/modules/tcp_syn_dos.ko[0m netfilter tcp syn flood module loaded [32m[SYSTEM]/sbin/insmod /lib/modules/clamp_total_session_for_onetfilter clamp total session for one src ip module loaded ne_src.ko[0m [32m[SYSTEM]/sbin/insmod /lib/mnetfilter other dos module loaded odules/others_dos.ko[0m [32m[SYSTEM]/sbin/insmod /lib/modules/2.6.36/kernel/drivers/net/wireless/rlt_wifi_ap/rlt_wifi.ko[0m register rlt_drv === pAd = c0e02000, size = 1248072 === <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x <-- RTMPAllocAdapterBlock, Status=0 pAd->CSRBaseAddress =0xc0d00000, csr_addr=0xc0d00000! device_id =0x7603 RtmpChipOpsHook(507): Not support for HIF_MT yet! mt7603_init()--> mt_bcn_buf_init(224): Not support for HIF_MT yet! <--mt7603_init() NOTIFY NOTIFY [32m[SYSTEM]/sbin/insmod /lib/modules/2.6.36/kernel/drivers/net/wireless/mt_wifi_ap/mt_wifi.ko[0m insmod: can't read '/lib/modules/2.6.36/kernel/drivers/net/wireless/mt_wifi_ap/mt_wifi.ko': No such file or directory [32m[SYSTEM]/sbin/insmod /lib/modules/2.6.36/kernel/fs/mbcache.ko[0m insmod: can't read '/lib/modules/2.6.36/kernel/fs/mbcache.ko': No such file or directory [32m[SYSTEM]/sbin/insmod /lib/modules/2.6.36/kernel/fs/jbd2/jbd2.ko[0m insmod: can't read '/lib/modules/2.6.36/kernel/fs/jbd2/jbd2.ko': No such file or directory [32m[SYSTEM]/sbin/insmod /lib/modules/2.6.36/kernel/fs/ext4/ext4.ko[0m insmod: can't read '/lib/modules/2.6.36/kernel/fs/ext4/ext4.ko': No such file or directory [32m[SYSTEM]/sbin/insmod /lib/modules/2.6.36/kernel/fs/hfsplus_journal/hfsplus.ko[0m insmod: can't read '/lib/modules/2.6.36/kernel/fs/hfsplus_journal/hfsplus.ko':usbcore: registered new interface driver usbfs No such file orusbcore: registered new interface driver hub directory [32usbcore: registered new device driver usb m[SYSTEM]/sbin/insmod /lib/modules/2.6.36/kernel/drivers/usb/core/usbcore.ko [0m [32m[SYSTEM]/sbin/insmod /lib/modules/2.6.36/kernel/drivers/usb/host/xhci-hcd.ko [0m FM_OUT value: u4FmOut = 0(0x00000000) FM_OUT value: u4FmOut = 0(0x00000000) FM_OUT value: u4FmOut = 0(0x00000000) FM_OUT value: u4FmOut = 0(0x00000000) FM_OUT value: u4FmOut = 0(0x00000000) FM_OUT value: u4FmOut = 0(0x00000000) FM_OUT value: u4FmOut = 0(0x00000000) FM_OUT value: u4FmOut = 0(0x00000000) FM_OUT value: u4FmOut = 0(0x00000000) FM_OUT value: u4FmOut = 0(0x00000000) FM_OUT value: u4FmOut = 0(0x00000000) FM_OUT value: u4FmOut = 0(0x00000000) FM_OUT value: u4FmOut = 0(0x00000000) FM_OUT value: u4FmOut = 0(0x00000000) FM_OUT value: u4FmOut = 0(0x00000000) FM_OUT value: u4FmOut = 0(0x00000000) FM_OUT value: u4FmOut = 0(0x00000000) FM_OUT value: u4FmOut = 0(0x00000000) FM_OUT value: u4FmOut = 0(0x00000000) FM_OUT value: u4FmOut = 0(0x00000000) xhc_mtk xhc_mtk: xHCI Host Controller xhc_mtk xhc_mtk: new USB bus registered, assigned bus number 1 xhc_mtk xhc_mtk: irq 22, io mem 0x1e1c0000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected xhc_mtk xhc_mtk: xHCI Host Controller xhc_mtk xhc_mtk: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected [32m[SYSTEM]/sbin/insmod /lib/modules/2.6.36/kernel/drivers/usb/storage/usb-storage.ko[0m Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. [32m[SYSTEM]/sbin/insmod /lib/modules/2.6.36/kernel/drivers/usb/serial/usbserial_filter.ko[0m insmod: can't read '/lib/modules/2.6.36/kernel/drivers/usb/serial/usbserial_filter.ko': No such file or directory [32m[SYSTEM]/bin/echo ==============insmod finish > /dev/console[0m =====NOTIFY =========insmod FFFFFFFF:FFFFFFFF:FFFFFFFF:FFFFFFFF:FFFFFFFF:FFFFFFFF finish [32m[SYRaeth v3.1 (STEM]/usr/sbin/lTaskleted_app blink_alw) ays 70 5 100 100 0[0m [32m[SYset CLK_CFG_0 = 0x40a00020!!!!!!!!!!!!!!!!!!1 STEM]/sbin/ifconfig eth2 up[0mphy_free_head is 0x218000!!! phy_free_tail_phy is 0x219ff0!!! txd_pool=a0010000 phy_txd_pool=00010000 ei_local->skb_free start address is 0x87f4a69c. free_txd: 00010010, ei_local->cpu_ptr: 00010000 POOL HEAD_PTR | DMA_PTR | CPU_PTR ----------------+---------+-------- 0xa0010000 0x00010000 0x00010000 phy_qrx_ring = 0x00217000, qrx_ring = 0xa0217000 phy_rx_ring0 = 0x0021c000, rx_ring0 = 0xa021c000 MT7530 Reset Completed!! change HW-TRAP to 0x17c8f set LAN/WAN LLLLW GMAC1_MAC_ADRH -- : 0x0000000c GMAC1_MAC_ADRL -- : 0x43288032 GDMA2_MAC_ADRH -- : 0x0000000c GDMA2_MAC_ADRL -- : 0x4328807c NOTIFY NOTIFY eth3: ===> VirtualIF_open MT7621 GE2 link rate to 1G CDMA_CSG_CFG = 81000000 GDMA1_FWD_CFG = 20710000 GDMA2_FWD_CFG = 20710000 NOTIFY [32m[SYSTEM]/sbin/ifconfig lo 1NOTIFY 27.0.0.0[0m NOTIFY [32m[SYSTEM]/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo[0m [32m[SYSTEM]/bin/cp /proc/uptime /tmp/lan_uptime[0m [32m[SYSTEM]/sbin/ifconfig eth2.1 down[0m ifconfig: SIOCGIFFLAGS: No such device [32m[SYSTEM]/sbin/ifconfigNOTIFY eth2.2 down[0m ifconfig: SIOCGIFFLAGS: No such device [32m[SYSTEM]/sbin/ifcra2880stop()...onfig eth2 downDone [0m eth3: ===> VirtualIF_close Free TX/RX Ring Memory! NOTIFY [32m[SYSTEM]/sbin/vconfig rem eth2.1[0m vconfig: ioctl error for rem: No such device [32m[SYSTEM]/sbin/vconfig rem ethNOTIFY 2.2[0m vconfigFFFFFFFF:FFFFFFFF:FFFFFFFF:FFFFFFFF:FFFFFFFF:FFFFFFFF : ioctl error foRaeth v3.1 (r rem: No such dTaskletevice [32m[SYS) TEM]/sbin/ifconfig eth2 up[0m set CLK_CFG_0 = 0x40a00020!!!!!!!!!!!!!!!!!!1 phy_free_head is 0x218000!!! phy_free_tail_phy is 0x219ff0!!! txd_pool=a0010000 phy_txd_pool=00010000 ei_local->skb_free start address is 0x87f4a69c. free_txd: 00010010, ei_local->cpu_ptr: 00010000 POOL HEAD_PTR | DMA_PTR | CPU_PTR ----------------+---------+-------- 0xa0010000 0x00010000 0x00010000 phy_qrx_ring = 0x00217000, qrx_ring = 0xa0217000 phy_rx_ring0 = 0x0021c000, rx_ring0 = 0xa021c000 MT7530 Reset Completed!! change HW-TRAP to 0x17c8f set LAN/WAN LLLLW GMAC1_MAC_ADRH -- : 0x0000000c GMAC1_MAC_ADRL -- : 0x43288032 eth3: ===> VirtualIF_open MT7621 GE2 link rate to 1G CDMA_CSG_CFG = 81000000 GDMA1_FWD_CFG = 20710000 GDMA2_FWD_CFG = 20710000 NOTIFY [32m[SYSTEM]/sbin/ifconfig eth2NOTIFY down[0m ra2880stop()...Done eth3: ===> VirtualIF_close Free TX/RX Ring Memory! NOTIFY [32m[SYSTEM]/sbin/ifconfig eth2NOTIFY hw ether 94:A6:7E:EE:12:4B [0m [32m[SYSTEM]/NOTIFY sbin/ifconfig etFFFFFFFF:FFFFFFFF:FFFFFFFF:FFFFFFFF:FFFFFFFF:FFFFFFFF h2 up[0m Raeth v3.1 (Tasklet) set CLK_CFG_0 = 0x40a00020!!!!!!!!!!!!!!!!!!1 phy_free_head is 0x218000!!! phy_free_tail_phy is 0x219ff0!!! txd_pool=a0010000 phy_txd_pool=00010000 ei_local->skb_free start address is 0x87f4a69c. free_txd: 00010010, ei_local->cpu_ptr: 00010000 POOL HEAD_PTR | DMA_PTR | CPU_PTR ----------------+---------+-------- 0xa0010000 0x00010000 0x00010000 phy_qrx_ring = 0x00217000, qrx_ring = 0xa0217000 phy_rx_ring0 = 0x0021c000, rx_ring0 = 0xa021c000 MT7530 Reset Completed!! change HW-TRAP to 0x17c8f set LAN/WAN LLLLW GMAC1_MAC_ADRH -- : 0x000094a6 GMAC1_MAC_ADRL -- : 0x7eee124b eth3: ===> VirtualIF_open MT7621 GE2 link rate to 1G CDMA_CSG_CFG = 81000000 GDMA1_FWD_CFG = 20710000 GDMA2_FWD_CFG = 20710000 NOTIFY [32m[SYSTEM]/usr/sbin/config-vlan.sh 3 0[0m restore GSW to dump switch mode switch reg write offset=2004, value=ff0000 switch reg write offset=2104, value=ff0000 switch reg write offset=2204, value=ff0000 switch reg write offset=2304, value=ff0000 switch reg write offset=2404, value=ff0000 switch reg write offset=2504, value=ff0000 switch reg write offset=2604, value=ff0000 switch reg write offset=2704, value=ff0000 switch reg write offset=2010, value=810000c0 switch reg write offset=2110, value=810000c0 switch reg write offset=2210, value=810000c0 switch reg write offset=2310, value=810000c0 switch reg write offset=2410, value=810000c0 switch reg write offset=2510, value=810000c0 switch reg write offset=2610, value=810000c0 switch reg write offset=2710, value=810000c0 REG_ESW_WT_MAC_ATC is 0x7ff0002 done. [32m[SYSTEM]/usr/sbin/echo '##### config Switch vlan partition (LLLLW) #####'[0m ##### config Switch vlan partition (LLLLW) ##### [32m[SYSTEM]/usr/sbin/switch vlan set 1 1 11110011[0m [32m[SYSTEM]/usr/sbin/switch vlan set 2 2 00001100[0m [32m[SYSTEM]/usr/sbin/switch pvid 4 2[0m Set port 4 pvid 2. [32m[SYSTEM]/usr/sbin/switch pvid 5 2[0m Set port 5 pvid 2. [32m[SYSTEM]/usr/sbin/switch reg w 2004 ff0003[0m switch reg write offset=2004, value=ff0003 [32m[SYSTEM]/usr/sbin/switch reg w 2104 ff0003[0m switch reg write offset=2104, value=ff0003 [32m[SYSTEM]/usr/sbin/switch reg w 2204 ffNOTIFY 0003[0m switcheth3: ===> VirtualIF_open reg write offseNOTIFY t=2204, value=ff0003 [32m[SYSTEM]/usr/sbin/switch reg w 2304 ff0003[0m switch reg write offset=2304, value=ff0003 [32m[SYSTEM]/usr/sbin/switch reg w 2404 ff0003[0m switch reg write offset=2404, value=ff0003 [32m[SYSTEM]/usr/sbin/switch reg w 2504 ff0003[0m swiget_wdev_by_idx: invalid idx(0) tch reg write offset=2504, valueget_wdev_by_idx: invalid idx(0) =ff0003 [32m[Sget_wdev_by_idx: invalid idx(0) YSTEM]/usr/sbin/get_wdev_by_idx: invalid idx(0) switch reg w 260get_wdev_by_idx: invalid idx(0) 4 ff0003[0m switch reg write offset=2604, value=ff0003 [32m[SYSTEM]/sbin/ifcget_wdev_by_idx: invalid idx(0) onfig eth3 up[0m [32m[SYSTEM]switch reg w 30e0 2124[0m switch reg write offset=30e0, value=2124 [32m[SYSTEM]/usr/sbin/led_switch &[0m [32m[SYSTEM]/usr/sbin/mknod /dev/apsoc_nvram c 251 0[0m RC: wifi_init() [32m[SYSTEM]/usr/bin/killall access_logd[0m killall: access_logd: no process killed usb printer event [32m[SYSTEM]/usr/sbin/rc access_log start[0m get_wdev_by_idx: invalid idx(0) get_wdev_by_idx: invalid idx(0) get_wdev_by_idx: invalid idx(0) get_wdev_by_idx: invalid idx(0) get_wdev_by_idx: invalid idx(0) rcd: enQ=/usr/sbin/rc_app/rc_access_log start rcd: [run] deQ =/usr/sbin/rc_appget_wdev_by_idx: invalid idx(0) /rc_access_log start [32m[SYSTEM]/usr/sbin/rc access_dev start[0m rcd: enQ=/usr/sbin/rc_app/rc_access_dev start [modelinfo_product_id.c::modelinfo_map_index():112] 0xff 0xff, 0xffff. [modelinfo_product_id.c::modelinfo_map_index():144] default map index to WAC124, flash type is nand [modelinfo_product_id.c::modelinfo_map_index():149] find index 0 for modelinfo_get_product_name [modelinfo_product_id.c::modelinfo_map_index():112] 0xff 0xff, 0xffff. [modelinfo_product_id.c::modelinfo_map_index():144] default map index to WAC124, flash type is nand [modelinfo_product_id.c::modelinfo_map_index():149] find index 0 for modelinfo_get_product_name [modelinfo_product_id.c::modelinfo_set_autoupg_fileinfo():243] autoupg_fileinfo_in_nv is fileinfo.txt killall: access_logd: no process killed [modelinfo_product_id.c::modelinfo_map_index():112] 0xff 0xff, 0xffff. [modelinfo_product_id.c::modelinfo_map_index():144] default map index to WAC124, flash type is nand [modelinfo_product_id.c::modelinfo_map_index():149] find index 0 for modelinfo_get_product_name [modelinfo_product_id.c::modelinfo_map_index():112] 0xff 0xff, 0xffff. [modelinfo_product_id.c::modelinfo_map_index():144] default map index to WAC124, flash type is nand [modelinfo_product_id.c::modelinfo_map_index():149] find index 0 for modelinfo_get_product_name [modelinfo_product_id.c::modelinfo_set_autoupg_fileinfo():243] autoupg_fileinfo_in_nv is fileinfo.txt [init/init_cfg.c::rc_init():831] tm sync done [32m[SYSTEM]/sbin/rc led_ctrl start[0m rcd: enQ=/usr/sbin/rc_app/rc_led_ctrl start [32m[SYSTEM]/bin/echo ===============rc start > /dev/console[0m ===============rc start [32m[SYSTEM]/sbin/klogd&[0m [32m[SYSTEM]/usr/sbin/cmd_agent_ap[0m [32m[SYSTEM]/usr/sbin/cmd_agent&[0m [32m[SYSTEM]/usr/sbin/scfgmgr&[0m [32m[SYSTEM]/sbin/lan_monitor &[0m /bin/sh: /sbin/lan_monitor: not found [32m[SYSTEM]/sbin/rc syslogd start[0m rcd: enQ=/usr/sbin/rc_app/rc_syslogd start [32m[SYSTEM]/sbin/rc wlan start[0m [flash.c::sc_check_remotescfgmgrmagic():1357] buf:ff, ff, ff, ff [flash.c::sc_check_remotescfgmgrmagic():1359] magic:31, 3e, c5, 8d scfgmgr for local rcd: enQ=/usr/sbin/rc_app/rc_wlan start [32m[SYSTEM]/sbin/rc lan init[0m rcd: enQ=/usr/sbin/rc_app/rc_lan init [32m[SYSTEM]/sbin/rc firewall init[0m rcd: enQ=/usr/sbin/rc_app/rc_firewall init [32m[SYSTEM]/sbin/rc vlan start[0m rcd: enQ=/usr/sbin/rc_app/rc_vlan start [32m[SYSTEM]/sbin/rc lan start[0m rcd: enQ=/usr/sbin/rc_app/rc_lan start [32m[SYSTEM]/sbin/rc lan reset_switch[0m rcd: enQ=/usr/sbin/rc_app/rc_lan reset_switch [32m[SYSTEM]/sbin/rc wifi_isolation start[0m rcd: enQ=/usr/sbin/rc_app/rc_wifi_isolation start [32m[SYSTEM]/sbin/rc timezone start[0m rcd: enQ=/usr/sbin/rc_app/rc_timezone start [32m[SYSTEM]/sbin/rc sip_alg start[0m rcd: enQ=/usr/sbin/rc_app/rc_sip_alg start [32m[SYSTEM]/sbin/rc mediaserver start[0m rcd: enQ=/usr/sbin/rc_app/rc_mediaserver start [32m[SYSTEM]/sbin/rc dnrd start[0m rcd: enQ=/usr/sbin/rc_app/rc_dnrd start [32m[SYSTEM]/sbin/rc debug_mode start&[0m [32m[SYSTEM]/sbin/rc httpd start[0m rcd: enQ=/usr/sbin/rc_app/rc_debug_mode start rcd: enQ=/usr/sbin/rc_app/rc_httpd start [32m[SYSTEM]/sbin/rc httpd remote start[0m rcd: enQ=/usr/sbin/rc_app/rc_httpd remote start [32m[SYSTEM]/sbin/rc printk start[0m rcd: enQ=/usr/sbin/rc_app/rc_printk start [32m[SYSTEM]/sbin/rc ntp start[0m rcd: enQ=/usr/sbin/rc_app/rc_ntp start [32m[SYSTEM]/sbin/rc ddns init[0m rcd: enQ=/usr/sbin/rc_app/rc_ddns init [32m[SYSTEM]/sbin/rc wan init[0m rcd: enQ=/usr/sbin/rc_app/rc_wan init [32m[SYSTEM]/sbin/rc route start[0m rcd: enQ=/usr/sbin/rc_app/rc_route start [32m[SYSTEM]/sbin/rc ripd start[0m rcd: enQ=/usr/sbin/rc_app/rc_ripd start [32m[SYSTEM]/sbin/rc potcounter start[0m rcd: enQ=/usr/sbin/rc_app/rc_potcounter start [32m[SYSTEM]/sbin/rc lltd start[0m rcd: enQ=/usr/sbin/rc_app/rc_lltd start [32m[SYSTEM]/sbin/rc schedule start[0m rcd: enQ=/usr/sbin/rc_app/rc_schedule start [32m[SYSTEM]/sbin/rc usb_service init[0m rcd: enQ=/usr/sbin/rc_app/rc_usb_service init [32m[SYSTEM]/sbin/rc vlan start[0m rcd: enQ=/usr/sbin/rc_app/rc_vlan start [32m[SYSTEM]/sbin/rc dbus start[0m rcd: enQ=/usr/sbin/rc_app/rc_dbus start [32m[SYSTEM]/sbin/rc access_dev start[0m rcd: enQ=/usr/sbin/rc_app/rc_access_dev start [32m[SYSTEM]/sbin/rc accessctl_block restart[0m rcd: enQ=/usr/sbin/rc_app/rc_accessctl_block restart [32m[SYSTEM]/sbin/rc openvpn prepare[0m rcd: enQ=/usr/sbin/rc_app/rc_openvpn prepare [32m[SYSTEM]/etc/ad_arpd &[0m [32m[SYSTEM]/usr/sbin/crond &[0m [32m[SYSTEM]/usr/sbin/multi_pb_app 90 91 92 0 50&[0m [32m[SYSTEM]/usr/sbin/wlevt[0m /bin/sh: /usr/sbin/wlevt: not found [32m[SYSTEM]/etc/prepare_3g[0m preapre_sys_for_3g mknod: /dev/zero: File exists mknod: /dev/ttyUSB0: File exists mknod: /dev/ttyUSB1: File exists mknod: /dev/ttyUSB2: File exists mknod: /dev/ttyUSB3: File exists mkdir: cannot create directory '/var': File exists preapre_sys_for_3g done [32m[SYSTEM]/usr/sbin/rc usb_printer start[0m rcd: enQ=/usr/sbin/rc_app/rc_usb_printer start [32m[SYSTEM]/etc/turn_on_printer_led[0m [32m[SYSTEM]/bin/rc wan apcli_rc_ready[0m rcd: enQ=/usr/sbin/rc_app/rc_wan apcli_rc_ready [32m[SYSTEM]/sbin/rc upnp start[0m rcd: enQ=/usr/sbin/rc_app/rc_upnp start rcd: enQ=/usr/sbin/rc_app/rc_check_conn start [32m[SYSTEM]/sbin/watchdog &[0m [32m[SYSTEM]/usr/sbin/pot_daemon &[0m [32m[SYSTEM]/sbin/rc start finished[0m rcd: enQ=/usr/sbin/rc_app/rc_start finished [32m[SYSTEM]/bin/echo ===============rc finish > /dev/console[0m ===============rc finish [32m[SYSTEM]/bin/ps[0m PID USER VSZ STAT COMMAND 1 root 1556 S init 2 root 0 SW [kthreadd] 3 root 0 SW [ksoftirqd/0] 4 root 0 SW [kworker/0:0] 5 root 0 SW [kworker/u:0] 6 root 0 SW [migration/0] 7 root 0 SW [migration/1] 8 root 0 SW [kworker/1:0] 9 root 0 SW [ksoftirqd/1] 10 root 0 SW [migration/2] 11 root 0 SW [kworker/2:0] 12 root 0 SW [ksoftirqd/2] 13 root 0 SW [migration/3] 14 root 0 SW [kworker/3:0] 15 root 0 SW [ksoftirqd/3] 16 root 0 SW< [khelper] 17 root 0 SW [kworker/3:1] 18 root 0 SW [kworker/2:1] 19 root 0 SW [kworker/1:1] 20 root 0 SW [sync_supers] 21 root 0 SW [bdi-default] 22 root 0 SW< [kblockd] 23 root 0 SW [kswapd0] 24 root 0 SW [fsnotify_mark] 25 root 0 SW< [xfs_mru_cache] 26 root 0 SW< [xfslogd] 27 root 0 SW< [xfsdatad] 28 root 0 SW< [xfsconvertd] 29 root 0 SW< [crypto] 38 root 0 SW [mtdblock0] 39 root 0 SW [mtdblock1] 40 root 0 SW [mtdblock2] 41 root 0 SW [mtdblock3] 42 root 0 SW [mtdblock4] [watchdog.c::main():78] Watchdog: monitoring process 'mini_httpd' [watchdog.c::main():78] Watchdog: monitoring process 'nmbd' 43 root 0 SW [mtdblock5] 44 root 0 SW [mtdblock6] 45 root 0 SW [mtdblock7] 46 root 0 SW [mtdblock8] 47 root 0 SW [mtdblock9] 48 root 0 SW [mtdblock10] 49 root 0 SW [mtdblock11] 50 root 0 SW [mtdblock12] 51 root 0 SW [mtdblock13] [watchdog.c::main():94] Watchdog: process 'mini_httpd' should exist, but it does not exist, score: 5! 52 root 0 SW [mtdblock14] 53 root 0 SW [mtdblock15] 54 root 0 SW [mtdblock16] 55 root 0 SW [mtdblock17] 56 root 0 SW [mtdblock18] [pot_daemon.c::main():82] mtd has mac value,eixt! 57 root 0 SW [mtdblock19] 58 root 0 SW [mtdblock20] 59 root 0 SW [mtdblock21] Access Control log start. rcd: [run] deQ =/usr/sbin/rc_app/rc_access_dev start 60 root 0 SW [mtdblock22] Access Control socket create 61 root 0 SW [mtdblock23] 62 root 0 SW [mtdblock24] 63 root 0 SW [mtdblock25] 64 root 0 SW [mtdblock26] 65 root 0 SW [mtdblock27] 66 root 0 SW [mtdblock28] 67 root 0 SW [kworker/u:1] 74 root 0 SW [kworker/0:1] 76 root 1556 S /bin/sh /usr/etc/rcS 139 root 0 DW [i2c_drv_thread] 212 root 0 SW [khubd] 307 root 1696 S /usr/sbin/led_switch 317 root 1552 S /bin/sh -c /bin/sleep 10 && /bin/rc usb_service led_u 318 root 1548 S /bin/sleep 10 322 root 1204 S /usr/sbin/rcd 330 root 3676 S /usr/sbin/rc_app/rc_start 336 root 1192 S /sbin/klogd 339 root 1192 S /usr/sbin/cmd_agent_ap 343 root 1196 S /usr/sbin/cmd_agent 353 root 1684 S /usr/sbin/scfgmgr 411 root 1552 S /bin/sh /etc/ad_arpd 414 root 1216 S /usr/sbin/crond 416 root 1724 S /usr/sbin/multi_pb_app 90 91 92 0 50 427 root 1548 S sleep 30 494 root 1384 S /sbin/watchdog 501 root 1552 S /bin/sh -c /bin/ps 502 root 1556 R /bin/ps 505 root 1304 S /sbin/access_logd 506 root 3644 R /usr/sbin/rc_app/rc_access_dev start run smp wifi killall: access_devinfo: no process killed smp.sh:dhcpc wifi /etc/mtk/mt7621_smp.sh: line 179: cannot create /sys/class/net/apcli0/queues/rx-0/rps_cpus: nonexistent directory /etc/mtk/mt7621_smp.sh: line 179: cannot create /sys/class/net/apclii0/queues/rx-0/rps_cpus: nonexistent directory /etc/mtk/mt7621_smp.sh: line 179: cannot create /sys/class/net/wds0/queues/rx-0/rps_cpus: nonexistent directory /etc/mtk/mt7621_smp.sh: line 179: cannot create /sys/class/net/wds1/queues/rx-0/rps_cpus: nonexistent directory /etc/mtk/mt7621_smp.sh: line 179: cannot create /sys/class/net/wds2/queues/rx-0/rps_cpus: nonexistent directory /etc/mtk/mt7621_smp.sh: line 179: cannot create /sys/class/net/wds3/queues/rx-0/rps_cpus: nonexistent directory /etc/mtk/mt7621_smp.sh: line 179: cannot create /sys/class/net/wdsi0/queues/rx-0/rps_cpus: nonexistent directory /etc/mtk/mt7621_smp.sh: line 179: cannot create /sys/class/net/wdsi1/queues/rx-0/rps_cpus: nonexistent directory /etc/mtk/mt7621_smp.sh: line 179: cannot create /sys/class/net/wdsi2/queues/rx-0/rps_cpus: nonexistent directory /etc/mtk/mt7621_smp.sh: line 179: cannot create /sys/class/net/wdsi3/queues/rx-0/rps_cpus: nonexistent directory eth2/eth3 RPS: CPU0/2 run smp wifi done =============proc init /bin/sh: cannot create /proc/sys/net/ipv4/conf/group1/forwarding: nonexistent directory /bin/sh: cannot create /proc/sys/net/ipv4/conf/wlan0/forwarding: nonexistent directory /bin/sh: cannot create /proc/sys/net/ipv4/conf/wlan0-va0/forwarding: nonexistent directory /bin/sh: cannot create /proc/sys/net/ipv4/conf/eth1/rp_filter: nonexistent directory [32m[SYSTEM]/bin/echo 8 > /proc/sys/kernel/printk[0m =============proc finish starting pid 1, tty '/dev/ttyS1': '/bin/sh' # 1;1;112;112;1;0x1;1;112;112;1;0xget_wdev_by_idx: invalid idx(0) get_wdev_by_idx: invalid idx(0) get_wdev_by_idx: invalid idx(0) get_wdev_by_idx: invalid idx(0) get_wdev_by_idx: invalid idx(0) get_wdev_by_idx: invalid idx(0) Access Control socket create rcd: [run] deQ =/usr/sbin/rc_app/rc_led_ctrl start [32m[SYSTEM]/bin/led_app ctrl blink_data[0m sc_do_led_ctrl_ioctl:161 set ctrl to 0 rcd: [run] deQ =/usr/sbin/rc_app/rc_syslogd start [32m[SYSTEM]/sbin/syslogd -f /etc/syslog.conf[0m rcd: [run] deQ =/usr/sbin/rc_app/rc_wlan start [wlan/wifi.c::sync_wireless_nvram():2368] wifi_super_wifi_enable:0, wifi_powerpercent:100, wifi_super_wifi_enable1:0, wifi_powerpercent1:100 [wlan/wifi.c::start_wireless():2487] Check 2.4G max stream. [modelinfo_product_id.c::modelinfo_map_index():112] 0xff 0xff, 0xffff. [modelinfo_product_id.c::modelinfo_map_index():144] default map index to WAC124, flash type is nand [modelinfo_product_id.c::modelinfo_map_index():149] find index 0 for modelinfo_get_product_name [modelinfo_product_id.c::modelinfo_get_2g_stream():268] 2G stream is 2 [modelinfo_product_id.c::modelinfo_map_index():112] 0xff 0xff, 0xffff. [modelinfo_product_id.c::modelinfo_map_index():144] default map index to WAC124, flash type is nand [modelinfo_product_id.c::modelinfo_map_index():149] find index 0 for modelinfo_get_product_name [wlan/wifi.c::sCan't find DB for id==0 tart_wireless():2490] 2.4G chip max stream: 2, product spec announce 2 stream [wlan/wifi.c::start_wireless():2492] Check 5G max stream. [modelinfo_product_id.c::modelinfo_map_index():112] 0xff 0xff, 0xffff. [modelinfo_product_id.c::modelinfo_map_index():144] default map index to WAC124, flash type is nand [modelinfo_product_id.c::modelinfo_map_index():149] find index 0 for modelinfo_get_product_name [modelinfo_product_id.c::modelinfo_get_5g_stream():275] 5G stream is 4 [modelinfo_product_id.c::modelinfo_map_index():112] 0xff 0xff, 0xffff. [modelinfo_product_id.c::modelinfo_map_index():144] default map index to WAC124, flash type is nand [modelinfo_product_id.c::modelinfo_map_index():149] find index 0 for modelinfo_get_product_name [wlan/wifi.c::start_wireless():2495] 5G chip max stream: 4, product spec announce 4 stream [32m[SYSTEM]mkdir -p /etc/Wireless/RT2860[0m [ create_ralink_driver_conf - 737 ] : dfs:0 [32m[SYSTEM]mkdir -p /etc/Wireless/iNIC[0m [ create_ralink_driver_conf - 737 ] : dfs:0 [wlan/wifi.c::create_ralink_driver_conf():898] no need PERCENTAGEenable for 5G value 100 [wlan/wifi.c::create_ralink_driver_conf():1500] FW code: set 4T4R AntennaIndex according to PID [32m[SYSTEM]echo 1 > /tmp/apcli_wifi_if_inited[0m [32m[SYSTEM]echo 1 > /tmp/apcli_wifi_if_inited1[0m [wlan/wifi.c::start_wireless():2547] Check WiFi Config. [wlan/wifi.c::start_wireless():2556] Check 11AC support. [modelinfo_product_id.c::modelinfo_map_index():112] 0xff 0xff, 0xffff. [modelinfo_product_id.c::modelinfo_map_index():144] default map index to WAC124, flash type is nand [modelinfo_product_id.c::modelinfo_map_index():149] find index 0 for modelinfo_get_product_name [wlan/wifi.c::start_wireless():2558] SC 5G support level: 11ac [wlan/wifi.c::start_wireless():2560] Check guest_led REPLACE usb_led. [modelinfo_product_id.c::modelinfo_map_index():112] 0xff 0xff, 0xffff. [modelinfo_product_id.c::modelinfo_map_index():144] default map index to WAC124, flash type is nand [modelinfo_product_id.c::modelinfo_map_index():149] find index 0 for modelinfo_get_product_name [modelinfo_product_id.c::modelinfo_get_guest_led_replace_usb_led():261] guest_led_replace_usb_led is 0 [32m[SYSTEM]/bin/led_app setval guest_led_replace 0 [0m [modelinfo_product_id.c::modelinfo_map_index():112] 0xff 0xff, 0xffff. [modelinfo_product_id.c::modelinfo_map_index():144] default map index to WAC124, flash type is nand [modelinfo_product_id.c::modelinfo_map_index():149] find index 0 for modelinfo_get_product_name [modelinfo_product_id.c::modelinfo_get_guest_led_replace_usb_led():261] guest_led_replace_usb_led is 0 [wlan/wifi.c::start_wireless():2565] guest_led REPLACE usb_led: OFF [wlan/wifi.c::prepare_default_eeprom_bin_file():2154] link /etc_ro/wlan/MT7615_EEPROM.bin to 4x4 streams default eeprom. [32m[SYSTEM]/bin/ln -s /etc_ro/wlan/MT7615_EEPROM.bin.4x4 /etc_ro/wlan/MT7615_EEPROM.bin[0m [wlan/wifi.c::prepare_single_sku_simple():2013] check if location has singlesku.dat [wlan/wifi.c::prepare_single_sku_simple():2047] done [wlan/wifi.c::prepare_single_sku_simple():2051] try find region:United States [wlan/wifi.c::prepare_single_sku_simple():2057] find region:United States, use:FCC [32m[SYSTEM]/bin/mkdir -p /etc_ro/Wireless/RT2860AP/[0m [32m[SYSTEM]/bin/mkdir -p /etc/Wireless/RT2860AP/[0m [32m[SYSTEM]/bin/rm -rf /etc_ro/Wireless/RT2860AP//7615_SingleSKU.dat [0m [32m[SYSTEM]/bin/rm -rf /etc_ro/Wireless/RT2860AP//7615_SingleSKU_BF.dat [0m [32m[SYSTEM]/bin/rm -rf /etc/Wireless/RT2860AP//SingleSKU.dat [0m [32m[SYSTEM]/bin/cp /etc/mtk/singlesku_r6350//FCC/7615_SingleSKU.dat /etc_ro/Wireless/RT2860AP//[0m [32m[SYSTEM]/bin/cp /etc/mtk/singlesku_r6350//FCC/7615_SingleSKU_BF.dat /etc_ro/Wireless/RT2860AP//[0m [32m[SYSTEM]/bin/cp /etc/mtk/singlesku_r6350//FCC/SingleSKU.dat /etc/Wireless/RT2860AP//[0m [libscm_wl.c::set_ralink_wifi_mac():1630] CHIP: 7603 - current MAC: 94:A6:7E:EE:12:4B [libscm_wl.c::set_ralink_wifi_mac():1631] Assign MAC: 94:A6:7E:EE:12:4B [libscm_wl.c::set_ralink_wifi_mac():1634] no update! [libscm_wl.c::set_ralink_wifi_mac():1630] CHIP: 7615 - current MAC: 94:A6:7E:EE:12:4C [libscm_wl.c::set_ralink_wifi_mac():1631] Assign MAC: 94:A6:7E:ee:12:4c [libscm_wl.c::set_ralink_wifi_mac():1634] no update! get_wdev_by_idx: invalid idx(0) get_wdev_by_idx: invalid idx(0) get_wdev_by_idx: invalid idx(0) get_wdev_by_idx: invalid idx(0) get_wdev_by_idx: invalid idx(0) get_wdev_by_idx: invalid idx(0) [32m[SYSTEM]echo 1 > /tmp/wifi_mac_set[0m [32m[SYSTEM]/sbin/ifconfig ra0 NOTIFY up[0m TX_BCN DESC a000d000 size = 320 RX[0] DESC a000f000 size = 2048 RX[1] DESC a0212000 size = 2048 cfg_mode=9 cfg_mode=9 wmode_band_equal(): Band Equal! APSDCapable[0]=0 APSDCapable[1]=0 APSDCapable[2]=0 APSDCapable[3]=0 APSDCapable[4]=0 APSDCapable[5]=0 APSDCapable[6]=0 APSDCapable[7]=0 APSDCapable[8]=0 APSDCapable[9]=0 APSDCapable[10]=0 APSDCapable[11]=0 APSDCapable[12]=0 APSDCapable[13]=0 APSDCapable[14]=0 APSDCapable[15]=0 default ApCliAPSDCapable[0]=0 Key1Str is Invalid key length(0) or Type(0) Key1Str is Invalid key length(0) or Type(0) Key1Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) FW Version:ap_pcie FW Build Date:20160107100755 CmdAddressLenReq:(ret = 0) CmdFwStartReq: override = 1, address = 1048576 CmdStartDLRsp: WiFI FW Download Success AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC) efuse_probe: efuse = 10000002 RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5 RtmpEepromGetDefault::e2p_dafault=1 RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1 NVM is FLASH mode, flash_offset = 0x0 1. Phy Mode = 14 @@@ NICReadEEPROMParameters : pAd->FWLoad=0 Country Region from e2p = ffff tssi_1_target_pwr_g_band = 36 2. Phy Mode = 14 3. Phy Mode = 14 NICInitPwrPinCfg(14): Not support for HIF_MT yet! NICInitializeAsic(584): Not support rtmp_mac_sys_reset () for HIF_MT yet! mt_mac_init()--> mt7603_init_mac_cr()--> AsicSetMacMaxLen(1826): Set the Max RxPktLen=1024! <--mt_mac_init() WTBL Segment 1 info: MemBaseAddr/FID:0x28000/0 EntrySize/Cnt:32/128 WTBL Segment 2 info: MemBaseAddr/FID:0x40000/0 EntrySize/Cnt:64/128 WTBL Segment 3 info: MemBaseAddr/FID:0x42000/64 EntrySize/Cnt:64/128 WTBL Segment 4 info: MemBaseAddr/FID:0x44000/128 EntrySize/Cnt:32/128 MtAsicACQueue: Write CR:21510, Value=10421 MtAsicACQueue: Write CR:21500, Value=10421 AntCfgInit(2574): Not support for HIF_MT yet! RTMPSetPhyMode(): channel out of range, use first ch=0 MCS Set = ff ff 00 00 01 rcd: enQ=/usr/sbin/rc_app/rc_usb_service led_update SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l SYNC - BBP R4 to 20MHz.l [PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0 [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0 [PMF]ap_pmf_init:: apidx=1, MFPC=0, MFPR=0, SHA256=0 [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0 [PMF]ap_pmf_init:: apidx=2, MFPC=0, MFPR=0, SHA256=0 [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0 AsicSetRalinkBurstMode(4148): Not support for HIF_MT yet! RTMPSetPiggyBack(876): Not support for HIF_MT yet! AsicSetTxPreamble(4135): Not support for HIF_MT yet! AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet! AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet! AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet! The 4-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 4 AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0 Main bssid = 94:a6:7e:ee:12:4b <==== rt28xx_init, Status=0 NOTIFY NOTIFY NOTIFY NOTIFY NOTIFY NOTIFY NOTIFY NOTIFY NOTIFY NOTIFY NOTIFY NOTIFY NOTIFY NOTIFY @@@ ed_monitor_exit : ===> @@@ ed_monitor_exit : <=== mt7603_set_ed_cca: TURN OFF EDCCA mac 0x10618 = 0xd7083f0f, EDCCA_Status=0 WiFi Startup Cost (ra0): 7.100s NOTIFY get_wdev_by_idx: invalid idx(0) get_wdev_by_idx: invalid idx(0) get_wdev_by_idx: invalid idx(0) [32m[SYSTEM]/sbget_wdev_by_idx: invalid idx(0) in/brctl addif gget_wdev_by_idx: invalid idx(0) roup1 ra0[0m get_wdev_by_idx: invalid idx(0) interface ra0 does not exist! [32m[SYSTEM]/bin/led_app on 40[0m [32m[SYSTEM]/bin/led_app on 41[0m Can't find DB for id==41 [wlan/wifi.c::start_wireless():2NOTIFY 629] no need fixget_wdev_by_idx: invalid idx(0) f2 f3 value singet_wdev_by_idx: invalid idx(0) ce this is 54M tget_wdev_by_idx: invalid idx(0) arget power and get_wdev_by_idx: invalid idx(0) NTGR need other get_wdev_by_idx: invalid idx(0) value [32m[SYSget_wdev_by_idx: invalid idx(0) TEM]/sbin/ifconfget_wdev_by_idx: invalid idx(0) ig rai0 up[0m DriverOwn()::Return since already in Driver Own... =============================== Current DevInfo Num: 0 =============================== =============================== Current BssInfo Num: 0 =============================== =============================== Current StaRec Num: 0 =============================== APWdsInitialize():WdsEntry[0] APWdsInitialize():WdsEntry[1] APWdsInitialize():WdsEntry[2] APWdsInitialize():WdsEntry[3] RtmpOSFileOpen(): Error 2 opening /etc/Wireless/iNIC/iNIC_ap_5G.dat Open file "/etc/Wireless/iNIC/iNIC_ap_5G.dat" failed! E2pAccessMode=2 SSID[0]=NETGEAR-1, EdcaIdx=0 SSID[1]=NETGEAR-3, EdcaIdx=0 SSID[2]=NETGEAR-2, EdcaIdx=0 RTMPSetProfileParameters(): DBDC Mode=0 cfg_mode=14 cfg_mode=14 wmode_band_equal(): Band Equal! BandSteering=0 [34m[TxPower] BAND0: 100 [0m[34m[SKUenable] BAND0: 1 [0mAPEdca0 APEdca1 APEdca2 APEdca3 APSDCapable[0]=0 APSDCapable[1]=0 APSDCapable[2]=0 APSDCapable[3]=0 APSDCapable[4]=0 APSDCapable[5]=0 APSDCapable[6]=0 APSDCapable[7]=0 APSDCapable[8]=0 APSDCapable[9]=0 APSDCapable[10]=0 APSDCapable[11]=0 APSDCapable[12]=0 APSDCapable[13]=0 APSDCapable[14]=0 APSDCapable[15]=0 default ApCliAPSDCapable[0]=0 default ApCliAPSDCapable[1]=0 [RTMPSetProfileParameters]Disable DFS/Zero wait=0/0 [PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=0 [PMF]Set_PMFMFPR_Proc:: apidx=0, Desired MFPR=0 [PMF]Set_PMFSHA256_Proc:: apidx=0, Desired PMFSHA256=0 rtmp_read_wds_from_file(): WDS Profile APWdsInitialize():WdsEntry[0] APWdsInitialize():WdsEntry[1] APWdsInitialize():WdsEntry[2] APWdsInitialize():WdsEntry[3] WDS-Enable mode=0 AndesSendCmdMsg: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD RTMPSetProfileParameters(): antenna_index=12 HT: Ext Channel = BELOW HT: greenap_cap = 0 IcapMode = 0 WtcSetMaxStaNum: MaxStaNum:85, BssidNum:3, WdsNum:4, ApcliNum:2, MaxNumChipRept:32, MinMcastWcid:123 Top Init Done! Use dev_alloc_skb RX[0] DESC a0004000 size = 8192 RX[1] DESC a0006000 size = 8192 Hif Init Done! ctl->txq = c04fa958 ctl->rxq = c04fa964 ctl->ackq = c04fa970 ctl->kickq = c04fa97c ctl->tx_doneq = c04fa988 ctl->rx_doneq = c04fa994 mt7615_fw_prepare():FW(8a10), HW(8a10), CHIPID(7615)) mt7615_fw_prepare(2725): MT7615_E3, USE E3 patch and ram code binary image AndesMTLoadRomMethodFwDlRing(1043), cap->rom_patch_len(11150) AndesRestartCheck: Current TOP_MISC2(0x1) AndesRestartCheck: (TOP_MISC2 = 1), ready to continue...RET(0) 20170714031500a platform = ALPS hw/sw version = 8a108a10 patch version = 00000010 Patch SEM Status=2 MtCmdPatchSemGet:(ret = 0) Patch is not ready && get semaphore success, SemStatus(2) EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) MtCmdPatchFinishReq EventGenericEventHandler: CMD Success Send checksum req.. Patch SEM Status=3 MtCmdPatchSemGet:(ret = 0) Release patch semaphore, SemStatus(3) AndesMTEraseRomPatch WfMcuHwInit: Before NICLoadFirmware, check IcapMode=0 AndesMTLoadFwMethodFwDlRing(810), cap->fw_len(459768) Build Date:_201710061327 Build Date:_201710061327 AndesRestartCheck: Current TOP_MISC2(0x1) AndesRestartCheck: (TOP_MISC2 = 1), ready to continue...RET(0) EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) MtCmdFwStartReq: override = 1, address = 540672 EventGenericEventHandler: CMD Success Build Date:_201707261512 EventGenericEventHandler: CMD Success MtCmdAddressLenReq:(ret = 0) MtCmdFwStartReq: override = 4, address = 0 EventGenericEventHandler: CMD Success WfMcuHwInit: NICLoadFirmware OK, Check IcapMode=0 MCU Init Done! efuse_probe: efuse = 10000212 RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5 RtmpEepromGetDefault::e2p_dafault=1 RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1 NVM is FLASH mode. dev_idx [1] FLASH OFFSET [0x8000] NICReadEEPROMParameters():Calling eeinit [34mNICReadEEPROMParameters: EEPROM 0x52 b302[m [34mNICReadEEPROMParameters: EEPROM 0x52 b302[m Country Region from e2p = 101 mt7615_antenna_default_reset(): TxPath = 4, RxPath = 4 mt7615_antenna_default_reset(): DBDC 2G TxPath = 2, 2G RxPath = 2 mt7615_antenna_default_reset(): DBDC 5G TxPath = 2, 2G RxPath = 2 rtmp_read_txpwr_from_eeprom(243): Don't Support this now! RTMPReadTxPwrPerRate(1382): Don't Support this now! RcRadioInit(): DbdcMode=0, ConcurrentBand=1 RcRadioInit(): pRadioCtrl=8776a450,Band=0,rfcap=3,channel=1,PhyMode=2 MtCmdSetDbdcCtrl:(ret = 0) Band Rf: 1, Phy Mode: 2 AntCfgInit(2779): Not support for HIF_MT yet! MtSingleSkuLoadParam: RF_LOCKDOWN Feature OFF !!! MtBfBackOffLoadTable: RF_LOCKDOWN Feature OFF !!! EEPROM Init Done! mt_mac_init()--> mt_mac_pse_init(2787): Don't Support this now! mt7615_init_mac_cr()--> mt7615_init_mac_cr(): TMAC_TRCR0=0x82783c8c mt7615_init_mac_cr(): TMAC_TRCR1=0x82783c8c MtAsicSetMacMaxLen(1313): Not finish Yet! <--mt_mac_init() CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0 CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0 CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0 MAC Init Done! MT7615BBPInit():BBP Initialization..... Band 0: valid=1, isDBDC=0, Band=2, CBW=1, CentCh/PrimCh=1/1, prim_ch_idx=0, txStream=2 Band 1: valid=0, isDBDC=0, Band=0, CBW=0, CentCh/PrimCh=0/0, prim_ch_idx=0, txStream=0 MT7615BBPInit() todo PHY Init Done! tx_pwr_comp_init():NotSupportYet! MtCmdSetMacTxRx:(ret = 0) CountryCode(2.4G/5G)=0/10, RFIC=25, PHY mode(2.4G/5G)=49/49, support 9 channels WifiSysOpen(), wdev idx = 0 wdev_attr_update(): wdevId0 = 94:a6:7e:ee:12:4c MtCmdSetDbdcCtrl:(ret = 0) ApAutoChannelAtBootUp-----------------> ApAutoChannelAtBootUp: AutoChannelBootup = 0, AutoChannelFlag = 0 ApAutoChannelAtBootUp<----------------- MtAsicSetChBusyStat(865): Not support for HIF_MT yet! [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0 [PMF]WPAMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0 HcUpdatePhyMode(): Update PhyMode for all wdev for this band PhyMode:49,Channel=153 CountryCode(2.4G/5G)=0/10, RFIC=25, PHY mode(2.4G/5G)=49/49, support 9 channels wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1 LinkToOmacIdx = 0, LinkToWdevType = 1 bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8192, CmdBssInfoBmcRate.u2McTransmit = 8196 [RadarStateCheck]Set into RD_NORMAL_MODE MtCmdTxPowerSKUCtrl: fgTxPowerSKUEn: 1, BandIdx: 0 MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 0, BandIdx: 0 MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 0, BandIdx: 0 MtCmdTxPwrUpCtrl: ucBandIdx: 0, cPwrUpCat: 0 MtCmdTxPwrUpCtrl: cPwrUpValue: (0)-(0)-(0)-(0)-(0)-(0)-(0) MtCmdTxPwrUpCtrl: ucBandIdx: 0, cPwrUpCat: 1 MtCmdTxPwrUpCtrl: cPwrUpValue: (0)-(0)-(0)-(0)-(0)-(0)-(0) MtCmdTxPwrUpCtrl: ucBandIdx: 0, cPwrUpCat: 2 MtCmdTxPwrUpCtrl: cPwrUpValue: (0)-(0)-(0)-(0)-(0)-(0)-(0) MtCmdTxPwrUpCtrl: ucBandIdx: 0, cPwrUpCat: 3 MtCmdTxPwrUpCtrl: cPwrUpValue: (0)-(0)-(0)-(0)-(0)-(0)-(0) MtCmdTxPwrUpCtrl: ucBandIdx: 0, cPwrUpCat: 4 MtCmdTxPwrUpCtrl: cPwrUpValue: (0)-(0)-(0)-(0)-(0)-(0)-(0) MtCmdTxPwrUpCtrl: ucBandIdx: 0, cPwrUpCat: 5 MtCmdTxPwrUpCtrl: cPwrUpValue: (0)-(0)-(0)-(0)-(0)-(0)-(0) MtCmdTxPwrUpCtrl: ucBandIdx: 0, cPwrUpCat: 6 MtCmdTxPwrUpCtrl: cPwrUpValue: (0)-(0)-(0)-(0)-(0)-(0)-(0) mt7615_bbp_adjust():rf_bw=2, ext_ch=3, PrimCh=153, HT-CentCh=151, VHT-CentCh=155 mt7615_apply_dcoc() : reload Central CH [155] BW [2] from cetral freq [5775] offset [2000] MtCmdGetRXDCOCCalResult:(ret = 0) mt7615_apply_cal_data() : eeprom 0x52 bit 0 is 0, do runtime cal , skip TX reload MtCmdChannelSwitch: control_chl = 153,control_ch2=0, central_chl = 155 DBDCIdx= 0, Band= 0 BW = 2,TXStream = 4, RXStream = 4, scan(0) :MtCmdPktBudgetCtrl: bssid(255),wcid(65535),type(0) ap_phy_rrm_init_byRf(): AP Set CentralFreq at 155(Prim=153, HT-CentCh=151, VHT-CentCh=155, BBP_BW=2) [WrapDfsRadarDetectStart]: Band0Ch is 153[WrapDfsRadarDetectStart]: Band1Ch is 0LeadTimeForBcn, OmacIdx = 0, WDEV_WITH_BCN_ABILITY MtAsicSetRalinkBurstMode(2618): Not support for HIF_MT yet! MtAsicSetPiggyBack(802): Not support for HIF_MT yet! MtAsicSetTxPreamble(2597): Not support for HIF_MT yet! RTMPSetLEDStatus: before AndesLedEnhanceOP , status=1, LED_CMD=2! AndesLedEnhanceOP: Success! Main bssid = 94:a6:7e:ee:12:4c AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn MtCmdSetMacTxRx:(ret = 0) fdb_enable() MCS Set = ff ff ff ff 01 <==== mt_wifi_init, Status=0 MtCmdEDCCACtrl: BandIdx: 0, EDCCACtrl: 1 MtCmdEDCCACtrl: BandIdx: 1, EDCCACtrl: 1 NOTIFY NOTIFY NOTIFY NOTIFY WDS_Init(): The new WDS interface MAC = FF:FF:FF:FF:FF:FF MacTabMatchWCID = 0 NOTIFY NOTIFY The new WDS interface MAC = FF:FF:FF:FF:FF:FF MacTabMatchWCID = 0 NOTIFY NOTIFY The new WDS interface MAC = FF:FF:FF:FF:FF:FF MacTabMatchWCID = 0 NOTIFY NOTIFY The new WDS interface MAC = FF:FF:FF:FF:FF:FF MacTabMatchWCID = 0 NOTIFY NOTIFY Total allocated 4 WDS interfaces! NOTIFY NOTIFY WtcSetMaxStaNum: MaxStaNum:85, BssidNum:3, WdsNum:4, ApcliNum:2, MaxNumChipRept:32, MinMcastWcid:123 red_is_enabled: set CR4/N9 RED Enable to 1. cp_support_is_enabled: set CR4 CP_SUPPORT to Mode 2. Correct apidx from 0 to 0 for WscUUIDInit Generate UUID for apidx(0) UUID: c01b4580, len = 16 0x0000 : bc 32 9e 00 1d d8 11 b2 86 01 94 a6 7e ee 12 4c NOTIFY [32m[SYSTEM]/sbin/brctl addif group1 rai0[0m interface rai0 does not exist! [32m[SYSTEM]/bin/led_app on 40[0m [32m[SYSTEM]/bin/led_app on 42[0m Can't find DB for id==42 [wlan/wifi.c::start_wireless():2653] no need fix f2 f3 value since this is 54M target power and NTGR need other value [libscm_wl.c::GenerateUUID():135] GUI ASCII string: 38833092-3092-1883-90b7-94a67eee124b [libscm_wl.c::GenerateUUID():136] GUI HEX string: 388330923092188390b794a67eee124b [modelinfo_product_id.c::modelinfo_map_index():112] 0xff 0xff, 0xffff. [modelinfo_product_id.c::modelinfo_map_index():144] default map index to WAC124, flash type is nand [modelinfo_product_id.c::modelinfo_map_index():149] find index 0 for modelinfo_get_product_name [modelinfo_product_id.c::modelinfo_get_guest_led_replace_usb_led():261] guest_led_replace_usb_led is 0 [ has_8021x - 290 ] : 8021x none for band WIFI_BAND_2G [ has_8021x - 290 ] : 8021x none for band WIFI_BAND_5G [32m[SYSTEM]/usr/bin/killall miniupnpd_wsc[0m killall: miniupnpd_wsc: no process killed [32m[SYSTEM]/sbin/chmod +x /var/ralink_ap_start.shCan't find DB for id==44 [0m [32m[SYSTEM]/bin/sh -x /var/ralink_ap_start.sh[0m + iwprCan't find DB for id==45 iv ra0 set WscConfMode=0 + iwpriv rai0 set WscConfMode=0 + iwpRTMPIoctlMAC():wrq->u.data.length=9, pointer(7fb7fa10)=60200618! riv ra0 set WscSRTMPIoctlMAC():after trim space, ptr len=8, pointer(84f1f000)=60200618! etupLock=0 + iwpriv rai0 set WscSetupLock=0 + RTMPIoctlMAC():wrq->u.data.length=18, pointer(7ff6c5f0)=60200618=D7083F0F! iwpriv ra0 set WRTMPIoctlMAC():after trim space, ptr len=17, pointer(84f3b000)=60200618=D7083F0F! scMaxPinAttack=3 + iwpriv rai0 set WscMaxPinAttack=3 + route aRTMPIoctlMAC():wrq->u.data.length=9, pointer(7f8e9aa0)=60200618! dd -host 239.255RTMPIoctlMAC():after trim space, ptr len=8, pointer(84f3f000)=60200618! .255.250 dev group1 + iwpriv ra0 set WscConfModRTMPIoctlMAC():after trim space, ptr len=8, pointer(84f1f000)=82072218! e=7 + iwpriv rai0 set WscConfMode=7 + miniupnpd_wsc -m 1 -I raRTMPIoctlMAC():after trim space, ptr len=17, pointer(84f3b000)=82072218=E8AFC3A0! 0 -P /var/run/miniupnpd.ra0 -i eth3 -a 192.168.0RTMPIoctlMAC():after trim space, ptr len=8, pointer(84f3f000)=82072218! .100 -n 7777 -u 38833092-3092-1883-90b7-94a67eee124b Unknown option: -I Unknown option: ra0 + sleep 10 + sleNOTIFY ep 10 + sleep 1NOTIFY 0 + + sleepsleep 10 10 + sleep 10 [32m[SYSTEM]/bin/cp /proNOTIFY c/uptime /tmp/wlNOTIFY an_uptime[0m [32m[SYSTEM]/bin/led_app on 44[0m [32m[SYSTEMNOTIFY ]/usr/sbin/led_aNOTIFY pp on 45[0m [wlan/wifi.c::need_disable_edcca():2378] wifiregioNOTIFY n_in_gui:United NOTIFY States [wlan/wifi.c::start_wireless():2718] DISABLE EDCCA for 2G and 5G [32m[SYSTEM]/usr/sbin/iwpriv ra0 mac 60200618[0m ra0 mac:[0x10618]:d7083f0f [32m[SYSTEM]/usr/sbin/iwpriv ra0 mac 60200618=D7083F0F[0m ra0 mac:[0x10618]:d7083f0f [32m[SYSTEM]/usr/sbin/iwpriv ra0 mac 60200618[0m ra0 mac:[0x10618]:d7083f0f [32m[SYSTEM]/usr/sbin/iwpriv rai0 mac 82072218[0m rai0 mac:[0x12218]:e8afc020 [32m[SYSTEM]/usr/sbin/iwpriv rai0 mac 82072218=E8AFC3A0[0m rai0 mac:[0x12218]:e8afc3a0 [32m[SYSTEM]/usr/sbin/iwpriv rai0 mac 82072218[0m rai0 mac:[0x12218]:e8afc3a0 [ start_wifi_service - 2906 ] : rc not ready, not enqueue the apcli_start rcd: [run] deQ =/usr/sbin/rc_app/rc_lan init [32m[SYSTEM]/usr/sbin/brctl addbr group1[0m [32m[SYSTEM]/sbin/ifconfig group1 up[0m [32m[SYSTEM]/usr/sbin/brctl addbr group2[0m [32m[SYSTEM]/sbin/ifconfig group2 up[0m rcd: [run] deQ =/usr/sbin/rc_app/rc_firewall init [ firewall_main - 133 ] : before fw_exe [ firewall_main - 136 ] : end fw_exe iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. [libiptc/libiptc.c::iptc_commit():2608] out_free_newcounters iptables: No chain/target/match by that name. [libiptc/libiptc.c::iptc_commit():2608] out_free_newcounters iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. [libiptc/libiptc.c::iptc_commit():2608] out_free_newcounters iptables: No chain/target/match by that name. [libiptc/libiptc.c::iptc_commit():2608] out_free_newcounters iptables: No chain/target/match by that name. rcd: [run] deQ =/usr/sbin/rc_app/rc_vlan start rcd: [run] deQ =/usr/sbin/rc_app/rc_lan start [scvlan.c::get_vlan_group():50] enable:1, type:0, group name:Bridge, vid=0, pri=device eth2 entered promiscuous mode 0, ports=0000000group1: port 1(eth2) entering learning state 0 [32m[SYSTEM]group1: port 1(eth2) entering learning state /sbin/ifconfig eth2 up[0m [32m[SYSTEM]/usr/sbin/brctl addif group1 eth2[0m [32m[SYSTEM]/sbin/ifconfig ra0 device ra0 entered promiscuous mode up[0m [32m[SYgroup1: port 2(ra0) entering learning state STEM]/usr/sbin/bgroup1: port 2(ra0) entering learning state rctl addif group1 ra0[0m [ start_lan_vlan_L2 - 907 ] : guest interface ra1 NOT enabled [32m[device rai0 entered promiscuous mode SYSTEM]/sbin/ifcgroup1: port 3(rai0) entering learning state onfig rai0 up[0group1: port 3(rai0) entering learning state m [32m[SYSTEM]/usr/sbin/brctl addif group1 rai0[0m [ start_lNOTIFY an_vlan_L2 - 931 ] : guest interface rai1 NOT enabled [32m[SYSTEM]/sbin/ifconfig group1 down[group1: port 3(rai0) entering learning state 0m group1: port 2(ra0) entering learning state group1: port 1(eth2) entering learning state NOTIFY [32m[SYSTEM]/sbin/ifconfig group1 up[0m NOTIFY group1: port 3(rai0) entering learning state group1: port 3(rai0) entering learning state group1: port 2(ra0) entering learning state group1: port 2(ra0) entering learning state group1: port 1(eth2) entering learning state group1: port 1(eth2) entering learning state NOTIFY [32m[SYSTEM]/usr/sbin/brctl setfd group1 1[0m [32m[SYSTEM]/usr/sbin/brctl stp group1 off[0m [ start_lan_vlan_L3 - 817 ] : index:1, wan:1 2 3 [32m[SYSTEM]/sbin/ifconfig group1 192.168.0.100 netmask 255.255.255.0 broadcast 192.168.0.255[0m [32m[SYSTEM]/usr/sbin/ip route add to 192.168.0.0/24 dev group1 table 101[0m [32m[SYSTEM]/usr/sbin/ip route add to blackhole default table 101[0m [32m[SYSTEM]/usr/sbin/ip rule add from 192.168.0.100 table 101[0m [32m[SYSTEM]/usr/sbin/ip rule add iif group1 table 101[0m [32m[SYSTEM]/usr/sbin/ip rule add scmark 0x1 table 101[0m RTNETLINK answers: Invalid argument [32m[SYSTEM]/usr/sbin/rc_app/rc_dhcpd start 1[0m [32m[SYSTEM]killall udhcpd_1[0m killall: udhcpd_1: no process killed [32m[SYSTEM]/bin/ln -sf /usr/sbin/udhcpd /var/udhcpd_1[0m [32m[SYSTEM]/var/udhcpd_1 /etc/udhcpd.conf1 &[0m [32m[SYSTEM]/usr/sbin/rc_app/rc_firewall group 1[0m [ firewall_main - 133 ] : before fw_exe [dhcpd.c::udhcpd():116] udhcp server (v0.9.7) started [ read_wanParams - 917 ] : end of read_wanParams on wan1 [dhcpd.c::udhcpd():170] interface: group1, start : 200a8c0 end : fe00a8c0 [ read_wanParams - 917 ] : end of read_wanParams on wan1 [ read_wanParams - 917 ] : end of read_wanParams on wan1 [ read_wanParams - 917 ] : end of read_wanParams on wan1 [ read_wanParams - 917 ] : end of read_wanParams on wan1 [32m[SYSTEM]/usr/sbin/rc schedule restart[0m rcd: enQ=/usr/sbin/rc_app/rc_schedule restart [ read_wanParams - 917 ] : end of read_wanParams on wan1 [ read_wanParams - 917 ] : end of read_wanParams on wan1 [ read_wanParams - 917 ] : end of read_wanParams on wan1 [ read_wanParams - 917 ] : end of read_wanParams on wan1 [ read_wanParams - 917 ] : end of read_wanParams on wan1 [32m[SYSTEM]/usr/bin/killall -14 access_logd[0m [ firewall_main - 136 ] : end fw_exe iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. [scvlan.c::get_vlan_group():50] enable:1, type:0, group name:Bridge, vid=0, pri=0, ports=00000000 [32m[SYSTEM]/sbin/iNOTIFY fconfig eth2 up[0m [32m[SYSTEM]/usr/sbin/brctl addif group2 eth2[0m device eth2 is already a member of a brNOTIFY idge; can't enslave it to bridge group2. [32m[SYSTEM]/sbin/ifcNOTIFY onfig group2 dowNOTIFY n[0m [32m[SYSTEM]/sbin/ifconfig group2 up[0m [32m[SYSTEM]/usr/sbin/brctl setfd group2 1[0m [32m[SYSTEM]/usr/sbin/brctl stp group2 off[0m [ start_lan_vlan_L3 - 817 ] : index:2, wan:1 2 3 [scvlan.c::get_vlan_group():50] enable:1, type:0, group name:Bridge, vid=0, pri=0, ports=00000000 [32m[SYSTEM]/sbin/ifconfig eth2 up[0m [32m[SYSTEM]/usr/sbin/brctl addif group3 eth2[0m interface eth2 does not exist! [32m[SYSTEM]/sbin/ifconfig group3 down[0m ifconfig: SIOCGIFFLAGS: No such device [32m[SYSTEM]/sbin/ifconfig group3 up[0m ifconfig: SIOCGIFFLAGS: No such device [32m[SYSTEM]/usr/sbin/brctl setfd group3 1[0m set forward delay failed: No such device [32m[SYSTEM]/usr/sbin/brctl stp group3 off[0m set stp status failed: No such device [ start_lan_vlan_L3 - 817 ] : index:3, wan:1 2 3 [scvlan.c::get_vlan_group():50] enable:1, type:0, group name:Bridge, vid=0, pri=0, ports=00000000 [32m[SYSTEM]/sbin/ifconfig eth2 up[0m [32m[SYSTEM]/usr/sbin/brctl addif group4 eth2[0m interface eth2 does not exist! [32m[SYSTEM]/sbin/ifconfig group4 down[0m ifconfig: SIOCGIFFLAGS: No such device [32m[SYSTEM]/sbin/ifconfig group4 up[0m ifconfig: SIOCGIFFLAGS: No such device [32m[SYSTEM]/usr/sbin/brctl setfd group4 1[0m set forward delay failed: No such device [32m[SYSTEM]/usr/sbin/brctl stp group4 off[0m set stp status failed: No such device [ start_lan_vlan_L3 - 817 ] : index:4, wan:1 2 3 [scvlan.c::get_vlan_group():50] enable:1, type:0, group name:Bridge, vid=0, pri=0, ports=00000000 [32m[SYSTEM]/sbin/ifconfig eth2 up[0m [32m[SYSTEM]/usr/sbin/brctl addif group5 eth2[0m interface eth2 does not exist! [32m[SYSTEM]/sbin/ifconfig group5 down[0m ifconfig: SIOCGIFFLAGS: No such device [32m[SYSTEM]/sbin/ifconfig group5 up[0m ifconfig: SIOCGIFFLAGS: No such device [32m[SYSTEM]/usr/sbin/brctl setfd group5 1[0m set forward delay failed: No such device [32m[SYSTEM]/usr/sbin/brctl stp group5 off[0m set stp status failed: No such device [ start_lan_vlan_L3 - 817 ] : index:5, wan:1 2 3 [scvlan.c::get_vlan_group():50] enable:1, type:0, group name:Bridge, vid=0, pri=0, ports=00000000 [32m[SYSTEM]/sbin/ifconfig eth2 up[0m [32m[SYSTEM]/usr/sbin/brctl addif group6 eth2[0m interface eth2 does not exist! [32m[SYSTEM]/sbin/ifconfig group6 down[0m ifconfig: SIOCGIFFLAGS: No such device [32m[SYSTEM]/sbin/ifconfig group6 up[0m ifconfig: SIOCGIFFLAGS: No such device [32m[SYSTEM]/usr/sbin/brctl setfd group6 1[0m set forward delay failed: No such device [32m[SYSTEM]/usr/sbin/brctl stp group6 off[0m set stp status failed: No such device [ start_lan_vlan_L3 - 817 ] : index:6, wan:1 2 3 [scvlan.c::get_vlan_group():50] enable:1, type:0, group name:Bridge, vid=0, pri=0, ports=00000000 [32m[SYSTEM]/sbin/ifconfig eth2 up[0m [32m[SYSTEM]/usr/sbin/brctl addif group7 eth2[0m interface eth2 does not exist! [32m[SYSTEM]/sbin/ifconfig group7 down[0m ifconfig: SIOCGIFFLAGS: No such device [32m[SYSTEM]/sbin/ifconfig group7 up[0m ifconfig: SIOCGIFFLAGS: No such device [32m[SYSTEM]/usr/sbin/brctl setfd group7 1[0m set forward delay failed: No such device [32m[SYSTEM]/usr/sbin/brctl stp group7 off[0m set stp status failed: No such device [ start_lan_vlan_L3 - 817 ] : index:7, wan:1 2 3 [scvlan.c::get_vlan_group():50] enable:1, type:0, group name:Bridge, vid=0, pri=0, ports=00000000 [32m[SYSTEM]/sbin/ifconfig eth2 up[0m [32m[SYSTEM]/usr/sbin/brctl addif group8 eth2[0m interface eth2 does not exist! [32m[SYSTEM]/sbin/ifconfig group8 down[0m ifconfig: SIOCGIFFLAGS: No such device [32m[SYSTEM]/sbin/ifconfig group8 up[0m ifconfig: SIOCGIFFLAGS: No such device [32m[SYSTEM]/usr/sbin/brctl setfd group8 1[0m set forward delay failed: No such device [32m[SYSTEM]/usr/sbin/brctl stp group8 off[0m set stp status failed: No such device [ start_lan_vlan_L3 - 817 ] : index:8, wan:1 2 3 rcd: [run] deQ =/usr/sbin/rc_app/rc_lan reset_switch down port 0 Set: phy[0].reg[0] = 1840 down port 1 Set: phy[1].reg[0] = 1840 down port 2 Set: phy[2].reg[0] = 1840 down port 3 Set: phy[3].reg[0] = 1840 up port 0 Set: phy[0].reg[0] = 1240 up port 1 Set: phy[1].reg[0] = 1240 up port 2 Set: phy[2].reg[0] = 1240 up port 3 Set: phy[3].reg[0] = 1240 rcd: [run] deQ =/usr/sbin/rc_app/rc_wifi_isolation start [32m[SYSTEM]/bin/echo "lan_ip=192.168.0.100" > /proc/wifi_isolation[0m /bin/sh: cannot create /proc/wifi_isolation: nonexistent directory [32m[SYSTEM]/bin/echo "lan_netmask=255.255.255.0" > /proc/wifi_isolation[0m /bin/sh: cannot create /proc/wifi_isolation: nonexinet/netfilter/nf_conntrack_sip.c: write_proc: file: 85a2b4c0, buffer: 1 , count: 2, data: 00000000 stent directory rcd: [run] deQ =/usr/sbin/rc_app/rc_timezone start [32m[SYSTEM]/bin/echo GMT+8 > /etc/TZ[0m rcd: [run] deQ =/usr/sbin/rc_app/rc_sip_alg start [32m[SYSTEM]/bin/echo 1 > /proc/sipalg_enable[0m rcd: [run] deQ =/usr/sbin/rc_app/rc_mediaserver start #### media server is disable rcd: [run] deQ =/usr/sbin/rc_app/rc_dnrd start [ dnrd_main - 34 ] : do dnrd for 1 -> 1 [32m[SYSTEM]iptables -t nat -D PREROUTING -i group1 -p tcp --dport 80 -j DNAT --to 192.168.0.100:80[0m iptables: No chain/target/match by that name. [32m[SYSTEM]iptables -t nat -D PREROUTING -i group1 -p udp --dport 53 -m dnshj -j DNAT --to 192.168.0.100[0m iptables: No chain/target/match by that name. [32m[SYSTEM]iptables -t nat -D PREROUTING -i group1 -p udp --dport 53 -j DNAT --to 192.168.0.100[0m iptables: No chain/target/match by that name. [32m[SYSTEM]iptables -t nat -I PREROUTING -i group1 -d 66.114.62.22 -p tcp --dport 80 -j RETURN[0m [32m[SYSTEM]iptables -t nat -I PREROUTING -i group1 -d 66.114.62.29 -p tcp --dport 80 -j RETURN[0m [32m[SYSTEM]iptables -t nat -I PREROUTING -i group1 -d 174.35.24.133 -p tcp --dport 80 -j RETURN[0m [32m[SYSTEM]iptables -t nat -I PREROUTING -i group1 -d 101.96.10.64 -p tcp --dport 80 -j RETURN[0m [32m[SYSTEM]/bin/killall -9 dnrd_1 2>/dev/null[0m [ start_dnrd - 93 ] : wan_account BOARD_ID same, wan_account no need in host file [32m[SYSTEM]/bin/killall -9 dnrd_1 2>/dev/null[0m [32m[SYSTEM]/bin/ln -sf /usr/sbin/dnrd /var/dnrd_1[0m [32m[SYSTEM]/var/dnrd_1 -a 192.168.0.100 -m hosts -c off -r 0 -s 8.8.8.8 -o 0 -q xxx&[0m [32m[SYSTEM]iptables -t nat -I PREROUTING -i group1 -p udp --dport 53 -m dnshj -j DNAT --to 192.168.0.100[0m rcd: [run] deQ =/usr/sbin/rc_app/rc_debug_mode start killall: telnetenabled: no process killed rcd: [run] deQ =/usr/sbin/rc_app/rc_httpd start Notice: caching turned off [sc_language.c::create_language_file():467] Create link files for <English> Warning: Using /etc/hosts will be removed in a future version. Please use only the /etc/dnrd/master file or use -m off. [sc_language.c::update_language_mtd_mapping():366] update mtd /dev/mtdblock4 to ENU [sc_language.c::update_language_mtd_mapping():366] update mtd /dev/mtdblock5 to CHS [sc_language.c::update_language_mtd_mapping():366] update mtd /dev/mtdblock6 to RUS [sc_language.c::update_language_mtd_mapping():366] update mtd /dev/mtdblock7 to DEU [sc_language.c::update_language_mtd_mapping():366] update mtd /dev/mtdblock8 to ESP [sc_language.c::update_language_mtd_mapping():366] update mtd /dev/mtdblock9 to NLD [sc_language.c::update_language_mtd_mapping():366] update mtd /dev/mtdblock10 to KOR [sc_language.c::update_language_mtd_mapping():366] update mtd /dev/mtdblock11 to FRA [sc_language.c::update_language_mtd_mapping():366] update mtd /dev/mtdblock12 to SVE [sc_language.c::update_language_mtd_mapping():366] update mtd /dev/mtdblock13 to CSY [sc_language.c::update_language_mtd_mapping():366] update mtd /dev/mtdblock14 to TUR [sc_language.c::update_language_mtd_mapping():366] update mtd /dev/mtdblock15 to ITA [sc_language.c::create_language_file():490] Checking MTD </dev/mtdblock4> according to its id <ENU> [sc_language.c::decompress_language():200] Try to decompress MTD </dev/mtdblock4> [32m[SYSTEM]/bin/cat /www.eng/block.htm | /bin/sed "s|@model_name#|WAC124|g" > /etc/block.htm[0m + brctl addif group1 rai0 device rai0 is already device rai1 entered promiscuous mode a member of a brdevice rai1 left promiscuous mode idge; can't ensldevice rai1 entered promiscuous mode ave it to bridgedevice rai1 left promiscuous mode group1. + brctdevice rai2 entered promiscuous mode l addif group1 rdevice rai2 left promiscuous mode a0 + brctl addidevice rai2 entered promiscuous mode f group1 rai1 +device rai2 left promiscuous mode brctl addif grodevice ra1 entered promiscuous mode up1 ra1 + brctldevice ra2 entered promiscuous mode addif group1 ra2 + brctl addif group1 rai2 device ra0 is already a member of a bridge; can't enslave it to bridge group1. can't add rai1 to bridge group1: Invalid argument can't add rai2 to bridge group1: Invalid argument rmmod: ipt_REJECT: No such file or directory rcd: enQ=/usr/sbin/rc_app/rc_firewall restart [32m[SYSTEM]/usr/sbin/mini_httpd -d /www -r "NETGEAR WAC124" -c '**.cgi' -t 300&[0m rcd: [run] deQ =/usr/sbin/rc_app/rc_httpd remote start rcd: [run] deQ =/usr/sbin/rc_app/rc_printk start [32m[SYSTEM]/bin/echo 1 4 1 7 > /proc/sys/kernel/printk[0m rcd: [run] deQ =/usr/sbin/rc_app/rc_ntp start [32m[SYSTEM]/usr/sbin/netgear_ntp -z GMT+8& [0m rcd: [run] deQ =/usr/sbin/rc_app/rc_ddns init [ddns/ddns_cfg.c::ddns_init():474] +++ddns is disable, not need init++++ rcd: [run] deQ =/usr/sbin/rc_app/rc_wan init [ wan_main - 663 ] : rc wan enter [ read_wanParams - 917 ] : end of read_wanParams on wan1 [scvlan.c::get_vlan_group():50] enable:1, type:0, group name:Bridge, vid=0, pri=0, ports=00000000 [scvlan.c::get_vlan_group():50] enable:1, type:0, group name:Bridge, vid=0, pri=0, ports=00000000 [scvlan.c::get_vlan_group():50] enable:1, type:0, group name:Bridge, vid=0, pri=0, ports=00000000 [scvlan.c::get_vlan_group():50] enable:1, type:0, group name:Bridge, vid=0, pri=0, ports=00000000 [ read_wanParams - 917 ] : end of read_wanParams on wan2 [ read_wanParams - 917 ] : end of read_wanParams on wan3 [32m[SYSTEM]/bin/killall wan_monitor[0m killall: wan_monitor: no process killed [32m[SYSTEM]/bin/wan_monitor &[0m [32m[SYSTEM]/bin/mkdir /tmp/apcli[0m [32m[SYSTEM]/bin/touch /tmp/apcli/okrun[0m rcd: [run] deQ =/usr/sbin/rc_app/rc_route start rcd: [run] deQ =/usr/sbin/rc_app/rc_ripd start rcd: [run] deQ =/usr/sbin/rc_app/rc_potcounter start killall: potcounter: no process killed rcd: [run] deQ =/usr/sbin/rc_app/rc_lltd start [32m[SYSTEM]/usr/bin/lld2 group1[0m rcd: [run] deQ =/usr/sbin/rc_app/rc_schedule start [flash.c::sc_get_region():632] Original Region Data: 00, 01 [32m[SYSTEM]/bin/cp /usr/etc/crontab /etc/crontab[0m set crontab for wifi_schedule --- 0 [32m[SYSTEM]/bin/echo GMT+8 > /etc/TZ[0m [32m[SYSTEM]echo 1 > /proc/net/ipt_condition/schedule [0m /bin/sh: cannot create /proc/net/ipt_condition/schedule: nonexistent directory rcd: [run] deQ =/usr/sbin/rc_app/rc_usb_service init [32m[SYSTEM]/usr/sbin/rc_app/rc_smb event reconfig[0m [32m[SYSTEM]/etc/mtk/mt7621_smp.sh wifi[0m smp.sh:dhcpc wifi eth2/eth3 RPS: CPU0/2 [32m[SYSTEM]/bin/rm /etc/samba/secrets.tdb[0m rm: cannot remove '/etc/samba/secrets.tdb': No such file or directory [32m[SYSTEM]/usr/bin/killall -9 smbd >/dev/null 2>&1[0m [32m[SYSTEM]/usr/bin/killall -9 nmbd >/dev/null 2>&1[0m [wan_monitor.c::main():496] call rc wan restart [32m[SYSTEM]rc wan restart[0m rcd: enQ=/usr/sbin/rc_app/rc_wan restart [32m[SYSTEM]/usr/sbin/cp -f /etc/passwd.bak /etc/passwd[0m [32m[SYSTEM]/usr/sbin/rm -f /etc/samba/smbpasswd[0m [32m[SYSTEM]/usr/sbin/rc_app/rc_ftpd event mount[0m [32m[SYSTEM]/usr/bin/killall -9 bftpd >/dev/null 2>&1[0m [32m[SYSTEM]/usr/sbin/rc_app/rc_apple event mount[0m [32m[SYSTEM]/usr/sbin/rc_app/rc_smb_http_en_chk event mount[0m [ start_smb_http_en - 200 ] : entering [32m[SYSTEM]/usr/sbin/rc_app/rc_mediaserver event mount[0m [32m[SYSTEM]killall -9 minidlna[0m killall: minidlna: no process killed #### media server is disable [32m[SYSTEM]/usr/sbin/rc_app/rc_iserver event mount[0m [32m[SYSTEM]/usr/bin/killall -9 forked-daapd[0m killall: forked-daapd: no process killed [32m[SYSTEM]/usr/sbin/killall -9 hd-idle[0m killall: hd-idle: no process killed [modelinfo_product_id.c::modelinfo_map_index():112] 0xff 0xff, 0xffff. [modelinfo_product_id.c::modelinfo_map_index():144] default map index to WAC124, flash type is nand [modelinfo_product_id.c::modelinfo_map_index():149] find index 0 for modelinfo_get_product_name [modelinfo_product_id.c::modelinfo_get_guest_led_replace_usb_led():261] guest_led_replace_usb_led is 0 [32m[SYSTEM]/usr/sbin/led_app off 60[0m [modelinfo_product_id.c::modelinfo_map_index():112] 0xff 0xff, 0xffff. [modelinfo_product_id.c::modelinfo_map_index():144] default map index to WAC124, flash type is nand [modelinfo_product_id.c::modelinfo_map_index():149] find index 0 for modelinfo_get_product_name [modelinfo_product_id.c::modelinfo_get_guest_led_replace_usb_led():261] guest_led_replace_usb_led is 0 [32m[SYSTEM]/usr/sbin/led_app off 61[0m rcd: [run] deQ =/usr/sbin/rc_app/rc_vlan start rcd: [run] deQ =/usr/sbin/rc_app/rc_dbus start [32m[SYSTEM]/usr/sbin/dbus-daemon --config-file=/etc/dbus-1/system.conf[0m rcd: [run] deQ =/usr/sbin/rc_app/rc_access_dev start Access Control socket create rcd: [run] deQ =/usr/sbin/rc_app/rc_accessctl_block restart [32m[SYSTEM]/sbin/rmmod /lib/modules/accessctl_block.ko[0m rmmod: /lib/modules/accessctl_block.ko: No such file or directory rcd: [run] deQ =/usr/sbin/rc_app/rc_openvpn prepare [openvpn.c::decompress_openvpn_cert_file():89] Try to decompress MTD </dev/mtdblock25> [openvpn.c::get_openvpn_info():68] md5=54ecf60c839d4d000850a7e33e08ee79,len=13823 [openvpn.c::decompress_openvpn_cert_file():136] md5 ok! WARNING: can't open config file: /usr/local/ssl/openssl.cnf [openvpn.c::openvpn_cert_file_verify():158] buf=/usr/sbin/openssl x509 -in /tmp/openvpn/keys/ca.crt -noout -issuer > /tmp/ca.txt WARNING: can't open config file: /usr/local/ssl/openssl.cnf [openvpn.c::openvpn_cert_file_verify():161] buf=/usr/sbin/openssl x509 -in /tmp/openvpn/keys/server.crt -noout -issuer > /tmp/server.txt WARNING: can't open config file: /usr/local/ssl/openssl.cnf [openvpn.c::openvpn_cert_file_verify():164] buf=/usr/sbin/openssl x509 -in /tmp/openvpn/keys/client.crt -noout -issuer > /tmp/client.txt [openvpn.c::openvpn_cert_file_verify():175] /tmp/ca.txt verify ok [openvpn.c::openvpn_cert_file_verify():175] /tmp/server.txt verify ok [openvpn.c::openvpn_cert_file_verify():175] /tmp/client.txt verify ok [openvpn.c::openvpn_cert_file_verify():187] verify ok! [32m[SYSTEM]/usr/sbin/cp -af /tmp/openvpn/keys/* /tmp/openvpn/[0m [32m[SYSTEM]/usr/sbin/rm -rf /tmp/openvpn/keys[0m nvram commit! rcd: [run] deQ =/usr/sbin/rc_app/rc_usb_printer start rcd: an error occurred in execvp rcd: [run] deQ =/usr/sbin/rc_app/rc_wan apcli_rc_ready [ wan_main - 663 ] : rc wan enter [32m[SYSTEM]/bin/touch /tmp/apcli/rc_ready[0m rcd: [run] deQ =/usr/sbin/rc_app/rc_upnp start [32m[SYSTEM]/usr/bin/killall miniupnpd[0m killall: miniupnpd: no process killed [32m[SYSTEM]/usr/bin/killall miniupnpd_ap[0m killall: miniupnpd_ap: no process killed [32m[SYSTEM]route add -net 239.0.0.0 netmask 255.0.0.0 group1[0m [32m[SYSTEM]/usr/sbin/miniupnpd -i eth3 -a 192.168.0.100 -p 56688 -U -t 180 -T 4 -u 824ff22b-8c7d-41c5-a131-94a67eee124b[0m rcd: [run] deQ =/usr/sbin/rc_app/rc_check_conn start [ read_wanParams - 917 ] : end of read_wanParams on wan1 rcd: [run] deQ =/usr/sbin/rc_app/rc_start finished [32m[SYSTEM]/etc/mtk/mt7621_smp.sh wifi[0m [32m[SYSTEM]/bin/ping -4 -c 3 -w 3 www.netgear.com > /tmp/check_ping_result &[0m ping: bad address 'www.netgear.com' smp.sh:dhcpc wifi eth2/eth3 RPS: CPU0/2 [32m[SYSTEM]/etc/enlarge_mem_reclaim_threshold.sh [0m [32m[SYSTEM]/usr/sbin/echo > /tmp/bootup_finished[0m [start/start_cfg.c::bind_busydaemon_to_free_cpu():411] pid_multi_pb_app:416, pid_led_switch:307 pid_i2c_drv_thread:139 [32m[SYSTEM]/sbin/taskset -p 4 416[0m pid 416's current affinity mask: (null) pid 416's new affinity mask: 4 [32m[SYSTEM]/sbin/taskset -p 4 307[0m pid 307's current affinity mask: (null) pid 307's new affinity mask: 4 [32m[SYSTEM]/sbin/taskset -p 4 139[0m pid 139's current affinity mask: (null) pid 139's new affinity mask: 4 [32m[SYSTEM]/usr/sbin/generate_cert_file &[0m rcd: [run] deQ =/usr/sbin/rc_app/rc_usb_service led_update [flash.c::sc_check_remotescfgmgrmagic():1357] buf:ff, ff, ff, ff [flash.c::sc_check_remotescfgmgrmagic():1359] magic:31, 3e, c5, 8d [modelinfo_product_id.c::modelinfo_map_index():112] 0xff 0xff, 0xffff. [modelinfo_product_id.c::modelinfo_map_index():144] default map index to WAC124, flash type is nand [modelinfo_product_id.c::modelinfo_map_index():149] find index 0 for modelinfo_get_product_name [modelinfo_product_id.c::modelinfo_get_guest_led_replace_usb_led():261] guest_led_replace_usb_led is 0 [32m[SYSTEM]/usr/sbin/led_app off 60[0m [modelinfo_product_id.c::modelinfo_map_index():112] 0xff 0xff, 0xffff. [modelinfo_product_id.c::modelinfo_map_index():144] default map index to WAC124, flash type is nand [modelinfo_product_id.c::modelinfo_map_index():149] find index 0 for modelinfo_get_product_name [modelinfo_product_id.c::modelinfo_get_guest_led_replace_usb_led():261] guest_led_replace_usb_led is 0 [32m[SYSTEM]/usr/sbin/led_app off 61[0m rcd: [run] deQ =/usr/sbin/rc_app/rc_schedule restart [flash.c::sc_get_region():632] Original Region Data: 00, 01 [32m[SYSTEM]/bin/cp /usr/etc/crontab /etc/crontab[0m set crontab for wifi_schedule --- 0 [32m[SYSTEM]/bin/echo GMT+8 > /etc/TZ[0m [32m[SYSTEM]echo 1 > /proc/net/ipt_condition/schedule [0m /bin/sh: cannot create /proc/net/ipt_condition/schedule: nonexistent directory rcd: [run] deQ =/usr/sbin/rc_app/rc_firewall restart [ firewall_main - 133 ] : before fw_exe [ read_wanParams - 917 ] : end of read_wanParams on wan1 [ read_wanParams - 917 ] : end of read_wanParams on wan1 [ read_wanParams - 917 ] : end of read_wanParams on wan1 [ read_wanParams - 917 ] : end of read_wanParams on wan1 [ read_wanParams - 917 ] : end of read_wanParams on wan1 [32m[SYSTEM]/usr/sbin/rc schedule restart[0m rcd: enQ=/usr/sbin/rc_app/rc_schedule restart [ read_wanParams - 917 ] : end of read_wanParams on wan1 [ read_wanParams - 917 ] : end of read_wanParams on wan1 [ read_wanParams - 917 ] : end of read_wanParams on wan1 [ read_wanParams - 917 ] : end of read_wanParams on wan1 [ read_wanParams - 917 ] : end of read_wanParams on wan1 [32m[SYSTEM]/usr/bin/killall -14 access_logd[0m [ read_wanParams - 917 ] : end of read_wanParams on wan1 [ fw_wan_L3 - 78 ] : wan1-ip0.0.0 enter [ read_wanParams - 917 ] : end of read_wanParams on wan2 [ fw_wan_L3 - 78 ] : wan2-ip0.0.0 enter [ read_wanParams - 917 ] : end of read_wanParams on wan3 [ fw_wan_L3 - 78 ] : wan3-ip0.0.0 enter [ firewall_main - 136 ] : end fw_exe WARNING: can't open config file: /usr/local/ssl/openssl.cnf [generate_cert_file.c::cert_file_build_time():107] cert current year=2018 WARNING: can't open config file: /usr/local/ssl/openssl.cnf [generate_cert_file.c::cert_signature_algorithm_deprecated():133] Signature Algorithm of OpenVPN cert is: sha256WithRSAEncryption [generate_cert_file.c::main():219] openvpn cert correct, no need update [libiptc/libiptc.c::iptc_commit():2608] out_free_newcounters iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. [libiptc/libiptc.c::iptc_commit():2608] out_free_newcounters iptables: No chain/target/match by that name. [libiptc/libiptc.c::iptc_commit():2608] out_free_newcounters iptables: No chain/target/match by that name. iptables: Bad rule (does a matching rule exist in that chain?). iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. iptables: No chain/target/match by that name. rcd: [run] deQ =/usr/sbin/rc_app/rc_wan restart [ wan_main - 663 ] : rc wan enter [ wan_action - 440 ] : entering wan0 InternetGatewayDevice.WANDevice.1.WANConnectionDevice. [ read_wanParams - 917 ] : end of read_wanParams on wan1 [ wan_stop_con - 179 ] : entering wan1 [ipv6/common.c::ip6_config_dump():173] ignore dump ipv6 configconfig parser successfully . [ wan_stop_con - 195 ] : allWanL3 of TotalCon <> [ stop_L2 - 989 ] : entering wan1 [ wan_stop_con - 247 ] : stop l2 +++++++++++++++ [ read_wanParams - 917 ] : end of read_wanParams on wan2 [ wan_stop_con - 179 ] : entering wan2 [ wan_stop_con - 195 ] : allWanL3 of TotalCon <> [ stop_L2 - 989 ] : entering wan2 [ wan_stop_con - 247 ] : stop l2 +++++++++++++++ [ read_wanParams - 917 ] : end of read_wanParams on wan3 [ wan_stop_con - 179 ] : entering wan3 [ wan_stop_con - 195 ] : allWanL3 of TotalCon <> [ stop_L2 - 989 ] : entering wan3 [ wan_stop_con - 247 ] : stop l2 +++++++++++++++ [ wan_main - 985 ] : ======vpi=<0>,vci=<0>,enable=<0>,encap=<(null)> [ wan_main - 986 ] : mode=<(null)>,link_enable=<(null)>contype=<0> [ wan_action - 440 ] : entering wan0 InternetGatewayDevice.WANDevice.1.WANConnectionDevice. [ read_wanParams - 917 ] : end of read_wanParams on wan1 [ wan_action - 455 ] : entering wan0 wan_start_con [ wan_start_con - 279 ] : entering wan1 [ is_wan_enable - 93 ] : wan 1 is enabled for ANNEXB [ start_L2 - 906 ] : entering <wan 1> Ethernet [ start_eth - 665 ] : entering start_eth [32m[SYSTEM]/sbin/ifconfig eth3 up[0m [32m[SYSTEM]/sbin/ifconfig eth3 down[0m [32m[SYSTEM]/sbin/ifconfig eth3 hw ether 94:A6:7E:ee:12:4d [0m [32m[SYSTEM]/sbin/ifconfig eth3 up[0m [32m[SYSTEM]/sbin/ifconfig eth3 mtu 1500[0m [32m[SYSTEM]ifconfig eth3 up [0m [ start_eth - 671 ] : L3IfName: eth3 [ wan_start_con - 313 ] : usb NOT mounted, update smp since need update the pptp [32m[SYSTEM]/etc/mtk/mt7621_smp.sh wifi[0m smp.sh:dhcpc wifi eth2/eth3 RPS: CPU0/2 [ start_ip - 135 ] : entering wan1 [32m[SYSTEM]/bin/ln -sf /usr/sbin/udhcpc /var/w/udhcpc_1[0m [32m[SYSTEM]/usr/sbin/rc_app/rc_firewall wan 1 init[0m [ firewall_main - 133 ] : before fw_exe [ fw_new_wan_event - 31 ] : fw new event 4 [ read_wanParams - 917 ] : end of read_wanParams on wan1 [ fw_wan_L3 - 78 ] : wan1-ip0.0.0 enter [ firewall_main - 136 ] : end fw_exe [32m[SYSTEM]/var/w/udhcpc_1 -i eth3 -s /etc/udhcpc.mpvc.script -w 1 -o /tmp/w/info_1 -H "WAC124" -g 101&[0m [ wan_start_con - 394 ] : ipv6 restart <disable> [ wan_start_con - 399 ] : ipv6 restart, v4 mode dhcpc v6 mode disable [32m[SYSTEM]/usr/sbin/rc_app/rc_ipv6 restart[0m [32m[SYSTEM]/bin/echo 0 > /proc/sys/net/ipv6/conf/all/forwarding[0m [dhcpc.c::udhcpc():419] udhcp client (v0.9.7) started [32m[SYSTEM]/usr/bin/killall dhcp6c[0m [clientpacket.c::random_xid():163] t:59, pid:7190 [clientpacket.c::send_discover():232] Sending discover...with xid 811818024 killall: dhcp6c: no process killed [32m[SYSTEM]/bin/killall pppd_ip6[0m killall: pppd_ip6: no process killed [32m[SYSTEM]/usr/bin/killall radvd[0m killall: radvd: no process killed [32m[SYSTEM]/usr/bin/killall -9 dhcp6s[0m killall: dhcp6s: no process killed [32m[SYSTEM]/bin/killall -9 totd[0m killall: totd: no process killed [32m[SYSTEM]ip6tables -t filter -F[0m [32m[SYSTEM]ip6tables -t mangle -F[0m [32m[SYSTEM]ip6tables -t raw -F[0m [32m[SYSTEM]ip6tables -t filter -X[0m [32m[SYSTEM]ip6tables -t mangle -X[0m [32m[SYSTEM]ip6tables -t raw -X[0m [32m[SYSTEM]ip6tables -t filter -P INPUT ACCEPT[0m [32m[SYSTEM]ip6tables -t filter -P FORWARD ACCEPT[0m [32m[SYSTEM]ip6tables -C /tmp/rules6[0m ip6tables v1.4.10: option `-C' requires an argument Try `ip6tables -h' or 'ip6tables --help' for more information. [32m[SYSTEM]killall mld[0m killall: mld: no process killed [32m[SYSTEM]/sbin/ip -6 route flush dev tun6to4[0m Cannot find device "tun6to4" [32m[SYSTEM]/sbin/ip link set dev tun6to4 down[0m Cannot find device "tun6to4" [32m[SYSTEM]/sbin/ip tunnel del tun6to4[0m delete tunnel "tun6to4" failed: No such device [32m[SYSTEM]/sbin/Ip -6 route flush dev tun6rd[0m Cannot find device "tun6rd" [32m[SYSTEM]/sbin/Ip link set dev tun6rd down[0m Cannot find device "tun6rd" [32m[SYSTEM]/sbin/Ip tunnel del tun6rd[0m delete tunnel "tun6rd" failed: No such device [32m[SYSTEM]/sbin/rmmod ipv6_br.ko[0m rmmod: ipv6_br.ko: No such file or directory /bin/sh: /sbin/fc: not found [32m[SYSTEM]/usr/bin/killall dhcp6c[0m killall: dhcp6c: no process killed [32m[SYSTEM]/usr/bin/killall ip6_autod[0m killall: ip6_autod: no process killed [32m[SYSTEM]/bin/rm -f /var/ip6prefix*[0m [ipv6/ipv6.c::stop_ipv6():79] stop ip6 wan mode: (-1) [32m[SYSTEM]/bin/ip -6 route del default[0m RTNETLINK answers: No such file or directory [32m[SYSTEM]/bin/ip -6 route del default[0m RTNETLINK answers: No such file or directory [32m[SYSTEM]/bin/ip -6 route del default[0m RTNETLINK answers: No such file or directory [32m[SYSTEM]/bin/ip -6 route del default[0m RTNETLINK answers: No such file or directory [32m[SYSTEM]/bin/ip -6 route del default[0m RTNETLINK answers: No such file or directory [32m[SYSTEM]/bin/ip -6 route del default[0m RTNETLINK answers: No such file or directory [32m[SYSTEM]/bin/echo 1 > /proc/sys/net/ipv6/conf/all/disable_ipv6[0m [ipv6/common.c::ip6_config_dump():173] ignore dump ipv6 config[ipv6/ipv6.c::start_ipv6():176] IPV6IPV4PPP_ONE_SESSION not enable [32m[SYSTEM]/bin/echo 1 > /proc/sys/net/ipv6/conf/all/disable_ipv6[0m [32m[SYSTEM]/bin/echo 2 > /proc/sys/net/ipv6/conf/all/forwarding[0m [ start_ipv6 - 190 ] : ip6_config.wan_l2_ifname is eth3 [ipv6/ipv6.c::start_ipv6():203] ipv6 is over layer2, open rs/ra on eth3 [32m[SYSTEM]/bin/echo 3 > /proc/sys/net/ipv6/conf/eth3/router_solicitations[0m [32m[SYSTEM]/bin/echo 2 > /proc/sys/net/ipv6/conf/eth3/accept_ra[0m [ipv6/ipv6.c::start_ipv6():207] ipv6 is over layer2 interface eth3, trigger wan send out router solicitation [32m[SYSTEM]/bin/echo trigger_rs=1 > /proc/net/trigger_rs[0m [32m[SYSTEM]/bin/echo wan_if=eth3 > /proc/net/trigger_rs[0m [32m[SYSTEM]/bin/killall -9 totd[0m killall: totd: no process killed [ipv6/ipv6.c::start_ipv6():231] ip6 is disabled. [ipv6/common.c::ip6_config_free():503] ip6_6rdBRIP4Addr null [32m[SYSTEM]/usr/sbin/rc wifi_isolation restart[0m rcd: enQ=/usr/sbin/rc_app/rc_wifi_isolation restart [32m[SYSTEM]/usr/sbin/rc_app/rc_hw_nat start[0m [32m[SYSTEM]/bin/echo 3 > /proc/sys/vm/drop_caches; /bin/insmod /lib/modules/`uname -r`/kernel/net/nat/hw_nat/hw_nat.ko[0m [32m[SYSTEM]/sbin/iwpriv ra0 set hw_nat_register=1[0m Interface doesn't accept private ioctl... set (8BE2): Invalid argument [32m[SYSTEM]/sbin/iwpriv rai0 set hw_nat_register=1[0m [scvlan.c::get_vlan_group():50] enable:1, type:0, group name:Bridge, vid=0, pri=0, ports=00000000 [scvlan.c::get_vlan_group():50] enable:1, type:0, group name:Bridge, vid=0, pri=0, ports=00000000 [scvlan.c::get_vlan_group():50] enable:1, type:0, group name:Bridge, vid=0, pri=0, ports=00000000 [scvlan.c::get_vlan_group():50] enable:1, type:0, group name:Bridge, vid=0, pri=0, ports=00000000 [ read_wanParams - 917 ] : end of read_wanParams on wan2 [ wan_action - 455 ] : entering wan0 wan_start_con [ wan_start_con - 279 ] : entering wan2 [ is_wan_enable - 88 ] : wan 2 is not enable [ wan_start_con - 289 ] : wan 2 is disabled [ read_wanParams - 917 ] : end of read_wanParams on wan3 [ wan_action - 455 ] : entering wan0 wan_start_con [ wan_start_con - 279 ] : entering wan3 [ is_wan_enable - 88 ] : wan 3 is not enable [ wan_start_con - 289 ] : wan 3 is disabled rcd: [run] deQ =/usr/sbin/rc_app/rc_schedule restart [flash.c::sc_get_region():632] Original Region Data: 00, 01 [32m[SYSTEM]/bin/cp /usr/etc/crontab /etc/crontab[0m set crontab for wifi_schedule --- 0 [32m[SYSTEM]/bin/echo GMT+8 > /etc/TZ[0m [32m[SYSTEM]echo 1 > /proc/net/ipt_condition/schedule [0m /bin/sh: cannot create /proc/net/ipt_condition/schedule: nonexistent directory rcd: [run] deQ =/usr/sbin/rc_app/rc_wifi_isolation restart [32m[SYSTEM]/sbin/rmmod /lib/modules/wifi_isolation.ko[0m rmmod: /lib/modules/wifi_isolation.ko: No such file or directory [32m[SYSTEM]/bin/echo "lan_ip=192.168.0.100" > /proc/wifi_isolation[0m /bin/sh: cannot create /proc/wifi_isolation: nonexistent directory [32m[SYSTEM]/bin/echo "lan_netmask=255.255.255.0" > /proc/wifi_isolation[0m /bin/sh: cannot create /proc/wifi_isolation: nonexistent directory rcd: enQ=/usr/sbin/rc_app/rc_check_conn start rcd: [run] deQ =/usr/sbin/rc_app/rc_check_conn start [ read_wanParams - 917 ] : end of read_wanParams on wan1 [32m[SYSTEM]/bin/ping -4 -c 3 -w 3 www.netgear.com > /tmp/check_ping_result &[0m ping: bad address 'www.netgear.com' [clientpacket.c::send_discover():232] Sending discover...with xid 811818024 [clientpacket.c::send_discover():232] Sending discover...with xid 811818024 [script.c::run_script():451] ================== [script.c::run_script():453] interface=eth3 [script.c::run_script():453] PATH=/sbin:/bin:/usr/sbin:/usr/bin::/usr/local/sbin:/var/sbin [script.c::run_script():453] HOME=/ [script.c::run_script():453] w=1 [script.c::run_script():453] info=/tmp/w/info_1 [script.c::run_script():453] route_related_options_del_file=/tmp/dhcpc_route_related_options_del1 [script.c::run_script():454] ================== [script.c::run_script():458] execle'ing /etc/udhcpc.mpvc.script FAIL PATH=/sbin:/bin:/usr/sbin:/usr/bin::/usr/local/sbin:/var/sbin wan1: dhcpc FAIL [watchdog.c::main():107] Watchdog: process 'mini_httpd' exists, score: 4. [clientpacket.c::send_discover():232] Sending discover...with xid 791842716 [clientpacket.c::send_discover():232] Sending discover...with xid 791842716 [clientpacket.c::send_discover():232] Sending discover...with xid 791842716


[ 0.000000] Linux version 5.4.101 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16069-ec76cbc521)) #0 SMP Tue Mar 2 19:16:15 2021 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc) [ 0.000000] MIPS: machine is Netgear WAC124 [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] VPE topology {2,2} total 4 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] Normal zone: 288 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] percpu: Embedded 14 pages/cpu s26768 r8192 d22384 u57344 [ 0.000000] pcpu-alloc: s26768 r8192 d22384 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480 [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] Writing ErrCtl register=00003800 [ 0.000000] Readback ErrCtl register=00003800 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 120452K/131072K available (6068K kernel code, 208K rwdata, 1292K rodata, 1252K init, 238K bss, 10620K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] NR_IRQS: 256 [ 0.000000] random: get_random_bytes called from start_kernel+0x340/0x558 with crng_init=0 [ 0.000000] CPU Clock: 880MHz [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns [ 0.000008] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns [ 0.015488] Calibrating delay loop... 583.68 BogoMIPS (lpj=1167360) [ 0.055828] pid_max: default: 32768 minimum: 301 [ 0.065178] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.079584] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.097651] rcu: Hierarchical SRCU implementation. [ 0.107752] smp: Bringing up secondary CPUs ... [ 0.989016] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.989027] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.989040] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.989141] CPU1 revision is: 0001992f (MIPS 1004Kc) [ 0.144925] Synchronize counters for CPU 1: done. [ 1.080036] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 1.080046] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 1.080054] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 1.080112] CPU2 revision is: 0001992f (MIPS 1004Kc) [ 0.239347] Synchronize counters for CPU 2: done. [ 1.171160] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 1.171167] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 1.171175] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 1.171233] CPU3 revision is: 0001992f (MIPS 1004Kc) [ 0.326941] Synchronize counters for CPU 3: done. [ 0.386544] smp: Brought up 1 node, 4 CPUs [ 0.398959] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.418251] futex hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.432082] pinctrl core: initialized pinctrl subsystem [ 0.443990] NET: Registered protocol family 16 [ 0.464983] FPU Affinity set after 4688 emulations [ 0.482146] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512 [ 0.502309] random: fast init done [ 0.509108] clocksource: Switched to clocksource GIC [ 0.520720] NET: Registered protocol family 2 [ 0.530214] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.546828] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.561942] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.575935] TCP: Hash tables configured (established 1024 bind 1024) [ 0.588671] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.601557] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.615660] NET: Registered protocol family 1 [ 0.624223] PCI: CLS 0 bytes, default 32 [ 0.721057] 4 CPUs re-calibrate udelay(lpj = 1167360) [ 0.732584] workingset: timestamp_bits=14 max_order=15 bucket_order=1 [ 0.756684] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.768175] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.789198] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.805611] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.816913] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.828161] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.839997] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.856249] printk: console [ttyS0] disabled [ 0.864693] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A [ 0.882626] printk: console [ttyS0] enabled [ 0.899181] printk: bootconsole [early0] disabled [ 0.920367] mt7621-nand 1e003000.nand: Using programmed access timing: 31c07388 [ 0.935203] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1 [ 0.947858] nand: Macronix MX30LF1G18AC [ 0.955499] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 0.970577] mt7621-nand 1e003000.nand: ECC strength adjusted to 4 bits [ 0.983608] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134 [ 0.998166] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134 [ 1.012723] Scanning device for bad blocks [ 2.007650] Bad eraseblock 779 at 0x000006160000 [ 2.325819] 7 fixed-partitions partitions found on MTD device mt7621-nand [ 2.339336] Creating 7 MTD partitions on "mt7621-nand": [ 2.349750] 0x000000000000-0x000000100000 : "u-boot" [ 2.360956] 0x000000100000-0x000000200000 : "SC PART_MAP" [ 2.373210] 0x000000200000-0x000000600000 : "kernel" [ 2.384372] 0x000000600000-0x000002e00000 : "ubi" [ 2.395328] 0x000002e00000-0x000004600000 : "reserved0" [ 2.407124] 0x000004600000-0x000004800000 : "factory" [ 2.418607] 0x000004800000-0x000008000000 : "reserved1" [ 2.431899] libphy: Fixed MDIO Bus: probed [ 2.467488] libphy: mdio: probed [ 2.474176] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module [ 2.490464] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21 [ 2.509343] mt7621-pci 1e140000.pcie: Parsing DT failed [ 2.522457] NET: Registered protocol family 10 [ 2.532653] Segment Routing with IPv6 [ 2.540078] NET: Registered protocol family 17 [ 2.549002] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.575027] 8021q: 802.1Q VLAN Support v1.8 [ 2.585832] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module [ 2.608902] libphy: dsa slave smi: probed [ 2.617334] mt7530 mdio-bus:1f lan4 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY] [ 2.635213] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY] [ 2.653162] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY] [ 2.671032] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY] [ 2.688992] mt7530 mdio-bus:1f wan (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY] [ 2.706791] mt7530 mdio-bus:1f: configuring for fixed/rgmii link mode [ 2.724423] DSA: tree 0 setup [ 2.730657] rt2880-pinmux pinctrl: pcie is already enabled [ 2.741595] mt7621-pci 1e140000.pcie: Error applying setting, reverse things back [ 2.756645] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1) [ 2.771558] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0) [ 2.886321] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz [ 2.897435] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz [ 3.008480] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK) [ 3.022349] mt7621-pci 1e140000.pcie: PCIE0 enabled [ 3.032058] mt7621-pci 1e140000.pcie: PCIE1 enabled [ 3.041779] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002 [ 3.060486] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00 [ 3.073155] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff] [ 3.086848] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] [ 3.100546] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.111521] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400 [ 3.123519] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff] [ 3.136004] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff] [ 3.148556] pci 0000:00:00.0: supports D1 [ 3.156540] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 3.168329] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400 [ 3.180329] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff] [ 3.192814] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff] [ 3.205360] pci 0000:00:01.0: supports D1 [ 3.213344] pci 0000:00:01.0: PME# supported from D0 D1 D3hot [ 3.226036] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.241990] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.258124] pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280 [ 3.270140] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit] [ 3.283825] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link) [ 3.312575] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 3.322998] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff] [ 3.335137] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff] [ 3.348657] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff pref] [ 3.363054] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.376428] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000 [ 3.388442] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 3.401076] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 3.414433] pci 0000:00:01.0: PCI bridge to [bus 02-ff] [ 3.424850] pci 0000:00:01.0: bridge window [io 0x0000-0x0fff] [ 3.436988] pci 0000:00:01.0: bridge window [mem 0x00000000-0x000fffff] [ 3.450511] pci 0000:00:01.0: bridge window [mem 0x00000000-0x000fffff pref] [ 3.464895] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 3.478117] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] [ 3.491296] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] [ 3.505165] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000] [ 3.518336] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000] [ 3.532203] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] [ 3.545728] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref] [ 3.560112] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff] [ 3.573637] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref] [ 3.588022] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff] [ 3.601551] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff] [ 3.615075] pci 0000:00:00.0: BAR 7: assigned [io 0x1e160000-0x1e160fff] [ 3.628602] pci 0000:00:01.0: BAR 7: assigned [io 0x1e161000-0x1e161fff] [ 3.642136] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit] [ 3.656701] pci 0000:00:00.0: PCI bridge to [bus 01] [ 3.666591] pci 0000:00:00.0: bridge window [io 0x1e160000-0x1e160fff] [ 3.680109] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] [ 3.693631] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref] [ 3.708021] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff] [ 3.721544] pci 0000:00:01.0: PCI bridge to [bus 02] [ 3.731429] pci 0000:00:01.0: bridge window [io 0x1e161000-0x1e161fff] [ 3.744947] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff] [ 3.758473] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff pref] [ 3.773472] mt7530 mdio-bus:1f: Link is Up - 1Gbps/Full - flow control off [ 3.774539] UBI: auto-attach mtd3 [ 3.793823] ubi0: attaching mtd3 [ 4.206454] ubi0: scanning is finished [ 4.230219] ubi0: attached mtd3 (name "ubi", size 40 MiB) [ 4.240991] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 4.254680] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 4.268193] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 4.282054] ubi0: good PEBs: 320, bad PEBs: 0, corrupted PEBs: 0 [ 4.294018] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 [ 4.308397] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1614712575 [ 4.326583] ubi0: available PEBs: 0, total reserved PEBs: 320, PEBs reserved for bad PEB handling: 20 [ 4.344963] ubi0: background thread "ubi_bgt0d" started, PID 487 [ 4.348191] block ubiblock0_0: created from ubi0:0(rootfs) [ 4.367870] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem [ 4.381745] hctosys: unable to open rtc device (rtc0) [ 4.397885] VFS: Mounted root (squashfs filesystem) readonly on device 259:0. [ 4.416321] Freeing unused kernel memory: 1252K [ 4.425371] This architecture does not have kernel memory protection. [ 4.438197] Run /sbin/init as init process [ 4.981199] init: Console is alive [ 4.988237] init: - watchdog - [ 5.772070] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 5.872692] usbcore: registered new interface driver usbfs [ 5.883790] usbcore: registered new interface driver hub [ 5.894524] usbcore: registered new device driver usb [ 5.914578] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator [ 5.932398] xhci-mtk 1e1c0000.xhci: xHCI Host Controller [ 5.943039] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1 [ 5.965315] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010 [ 5.983622] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000 [ 5.996406] hub 1-0:1.0: USB hub found [ 6.003997] hub 1-0:1.0: 2 ports detected [ 6.012746] xhci-mtk 1e1c0000.xhci: xHCI Host Controller [ 6.023418] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2 [ 6.038357] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed [ 6.051234] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 6.068304] hub 2-0:1.0: USB hub found [ 6.075880] hub 2-0:1.0: 1 port detected [ 6.089659] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 6.109496] init: - preinit - [ 6.764960] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode [ 6.781165] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 6.798502] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 6.944449] random: jshn: uninitialized urandom read (4 bytes read) [ 7.015053] random: jshn: uninitialized urandom read (4 bytes read) [ 7.060339] random: jshn: uninitialized urandom read (4 bytes read) [ 7.290445] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode [ 7.304041] 8021q: adding VLAN 0 to HW filter on device lan1 [ 11.401602] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control off [ 11.416951] IPv6: ADDRCONF(NETDEV_CHANGE): lan1: link becomes ready [ 11.522873] UBIFS (ubi0:1): Mounting in unauthenticated mode [ 11.534381] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 623 [ 11.615573] UBIFS (ubi0:1): recovery needed [ 11.821856] UBIFS (ubi0:1): recovery completed [ 11.830850] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" [ 11.846450] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 11.866202] UBIFS (ubi0:1): FS size: 32759808 bytes (31 MiB, 258 LEBs), journal size 1650688 bytes (1 MiB, 13 LEBs) [ 11.886989] UBIFS (ubi0:1): reserved for root: 1547326 bytes (1511 KiB) [ 11.900165] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 2B131832-BF4F-4284-83DD-0CF8D56ED889, small LPT model [ 11.938358] mount_root: switching to ubifs overlay [ 11.963810] urandom-seed: Seeding with /etc/urandom.seed [ 12.071333] mt7530 mdio-bus:1f lan1: Link is Down [ 12.095093] procd: - early - [ 12.100946] procd: - watchdog - [ 12.701280] procd: - watchdog - [ 12.711513] procd: - ubus - [ 12.823485] procd: - init - [ 13.375314] kmodloader: loading kernel modules from /etc/modules.d/* [ 13.435612] Loading modules backported from Linux version v5.10.16-0-gde53befa79cf [ 13.450730] Backport generated by backports.git v5.10.16-1-0-g21d2a1d2 [ 13.513654] xt_time: kernel timezone is -0000 [ 13.568813] urngd: v1.0.2 started. [ 13.576300] mt7621-pci 1e140000.pcie: bus=2 slot=1 irq=24 [ 13.587115] pci 0000:00:01.0: enabling device (0004 -> 0007) [ 13.598402] mt7603e 0000:02:00.0: enabling device (0000 -> 0002) [ 13.610551] mt7603e 0000:02:00.0: ASIC revision: 76030010 [ 13.711709] random: crng init done [ 13.718510] random: 7 urandom warning(s) missed due to ratelimiting [ 14.242373] mt7603e 0000:02:00.0: Firmware Version: ap_pcie [ 14.253507] mt7603e 0000:02:00.0: Build Time: 20160107100755 [ 14.289105] mt7603e 0000:02:00.0: firmware init done [ 14.476344] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 14.488500] mt7621-pci 1e140000.pcie: bus=1 slot=0 irq=23 [ 14.499401] pci 0000:00:00.0: enabling device (0004 -> 0007) [ 14.510722] mt7615e 0000:01:00.0: enabling device (0000 -> 0002) [ 14.538394] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 14.561281] PPP generic driver version 2.4.2 [ 14.572908] NET: Registered protocol family 24 [ 14.632718] kmodloader: done loading kernel modules from /etc/modules.d/* [ 14.652282] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a [ 14.652282] [ 14.969201] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20200814163649 [ 15.028397] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20190121161307 [ 19.262412] mtk_soc_eth 1e100000.ethernet eth0: Link is Down [ 19.284108] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode [ 19.300280] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 19.303715] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode [ 19.332633] 8021q: adding VLAN 0 to HW filter on device lan1 [ 19.349583] br-lan: port 1(lan1) entered blocking state [ 19.360108] br-lan: port 1(lan1) entered disabled state [ 19.371571] device lan1 entered promiscuous mode [ 19.380894] device eth0 entered promiscuous mode [ 19.393698] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.414817] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode [ 19.428575] 8021q: adding VLAN 0 to HW filter on device lan2 [ 19.443964] br-lan: port 2(lan2) entered blocking state [ 19.454493] br-lan: port 2(lan2) entered disabled state [ 19.466153] device lan2 entered promiscuous mode [ 19.484536] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode [ 19.498406] 8021q: adding VLAN 0 to HW filter on device lan3 [ 19.513379] br-lan: port 3(lan3) entered blocking state [ 19.523868] br-lan: port 3(lan3) entered disabled state [ 19.535655] device lan3 entered promiscuous mode [ 19.555519] mt7530 mdio-bus:1f lan4: configuring for phy/gmii link mode [ 19.570368] 8021q: adding VLAN 0 to HW filter on device lan4 [ 19.585819] br-lan: port 4(lan4) entered blocking state [ 19.596321] br-lan: port 4(lan4) entered disabled state [ 19.608337] device lan4 entered promiscuous mode [ 19.633464] mt7530 mdio-bus:1f wan: configuring for phy/gmii link mode [ 19.647096] 8021q: adding VLAN 0 to HW filter on device wan [ 24.040834] br-lan: port 5(wlan1) entered blocking state [ 24.051445] br-lan: port 5(wlan1) entered disabled state [ 24.062491] device wlan1 entered promiscuous mode [ 24.072107] br-lan: port 5(wlan1) entered blocking state [ 24.082727] br-lan: port 5(wlan1) entered forwarding state [ 24.094152] br-lan: port 5(wlan1) entered disabled state [ 33.673612] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control off [ 33.688251] br-lan: port 1(lan1) entered blocking state [ 33.698690] br-lan: port 1(lan1) entered forwarding state


Space for additional notes, links to forum threads or other resources.

  • ...
This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2024/02/12 11:13
  • by 127.0.0.1