User Tools

Site Tools


toh:netgear:r7800

Netgear R7800

Under Construction!
This page is currently under construction. You can edit the article to help completing it.

Netgear R7800 is a dual-core 1.7 GHz AC2600 router based on IPQ8065 SoC and QCA9984 wifi.

Router has 512 MB RAM and 128 MB flash (about 80 MB free flash space after installation in 18.06 and later).

R7800

Supported Versions

Hardware Highlights

ModelVersionSoCCPU MHzFlash MBRAM MBWLAN HardwareWLAN2.4WLAN5.0100M portsGbit ports ModemUSB
R7800Qualcomm Atheros IPQ80651700128NAND512Qualcomm Atheros QCA9984b/g/na/n/ac-5-2x 3.0

Installation

Master and 18.06 have now a larger kernel partition, so that kernel 4.14 and flow offloading is possible. You will need TFTP flash once to upgrade/downgrade from one group to the other group listed below. Sysupgrade works normally inside each of these groups:

  • kernel 4.4 or 4.9: 17.01, old master builds (<r7000), plus the quite earliest 18.06 builds
  • kernel 4.14: new master builds (>r7000), new 18.06 builds (rc2 and final 18.06.0)

Additionally, the both master and 18.06 use now 70 MB larger area on flash, so installing more packages is possible. That was made the default for master and 18.06 branches in June 2018. Flashing to these new “large flash” builds needs TFTP flashing, again, if you are currently running an older small 19 MB flash build (like 17.01, 18.06.0-rc1 and old master builds).

See TFTP flashing instructions below, originally from forum: R7800 TFTP installation instructions in Openwrt forum

Debricking

R7800 has an easy-to-use TFTP flashing recovery mode in the bootloader, similar as some other Netgear routers e.g. WNDR3700.

Prerequisites for TFTP flashing

  • A TFTP client for your computer. There are both command-line tools and GUI versions available.
    • (I use currently tftpd64 GUI tool from jounin. TFTP2 tool (from dd-wrt) used to work earlier, but for some reason it does not work with the current master images.)
  • Your computer must have an IP address from the 192.168.1.x network, as the router' bootloader's TFTP recovery mode defaults to 192.168.1.1. You might need to manually config the address, as some operating systems change the IP rather quickly to a link-local 196.254.x.x address if there is no DHCP server. Verify that your PC still has 192.168.1.x before trying to TFTP.
  • A new firmware to flash in. Either an original Netgear firmware or an Openwrt “factory.img” firmware. “Sysupgrade” version will not work.
  • Access to router's reset button (on the back panel)

TFTP flashing process

  1. Turn off the power, push and hold the reset button (in a hole on backside) with a pin
  2. Turn on the power and wait till power led starts flashing white (after it first flashes orange for a while)
  3. Release the reset button and tftp the factory img in binary mode. The power led will stop flashing if you succeeded in transferring the image, and the router reboots rather quickly with the new firmware.

Note that this TFTP flash / recovery mode is in the u-boot bootloader, so it works before the actual firmware gets started.

Hardware

Info

Architecture ARMv7 Processor rev 0 (v7l), arm_cortex-a15_neon-vfpv4
Vendor Netgear
Bootloader U-Boot
System-On-Chip Qualcomm Atheros IPQ8065, 1.7GHz, 2 cores
Flash-Chip NAND, Micron MT29F1G08ABBEAH4
Flash size 128 MiB
RAM 512 MiB
Wireless Qualcomm Atheros QCA9984, 2.4GHz 802.11bgn, 5GHz a/n/ac
Ethernet 10/100/1000 Mbit/s w/ vlan support
USB 2x USB 3.0, 1x eSATA
Serial Yes
JTAG ?

Flash Layout

Flash layout in 18.06.0-rc2 and later. Since 18.06 Openwrt reserves 4 MB for kernel. ubi contains rootfs (/rom) and rootfs_data (/overlay)

/proc/mtd

dev:    size   erasesize  name
mtd0: 00c80000 00020000 "qcadata"
mtd1: 00500000 00020000 "APPSBL"
mtd2: 00080000 00020000 "APPSBLENV"
mtd3: 00140000 00020000 "art"
mtd4: 00140000 00020000 "artbak"
mtd5: 00400000 00020000 "kernel"
mtd6: 06080000 00020000 "ubi"
mtd7: 00700000 00020000 "reserve"
df

Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/root                 6400      6400         0 100% /rom
tmpfs                   239196      1124    238072   0% /tmp
/dev/ubi0_1              77872        92     73768   0% /overlay
overlayfs:/overlay       77872        92     73768   0% /
tmpfs                      512         0       512   0% /dev

Photos

 R7800

Insert photo of back of the casing

Insert photo of backside label

Insert photo of PCB

Opening the case

Detailed advice with pictures on opening the case: https://forum.openwrt.org/t/netgear-r7800-exploration-ipq8065-qca9984/285/2?u=hnyman

Summary:

The case bottom and cover are attached to each other pretty tightly, but the case can be opened once you figure out all necessary steps:

  • The circuitboard is attached to a heatsink that is attached to the top cover. So the bottom panel (with sides) is the one to separate from the others. The heatsink is likely attached with a thermal paste or such (I never removed it).
  • There are five screws (Torx T-10) on the bottom that need to be opened. One screw is visible and four are hidden inside the rubber feet (which are attached with adhesive tape)
  • There are small clips on sides keeping the top cover tight even when the screws have been opened. These clips need to be carefully pronged open with a flat screwdriver or something.
  • Additionally, there are fangs in the vertical backpanel protecting the connectors' holes (by preventing vertical lifting). In practice the front side can be lifted up first and the backside last by pulling forward so that the connectors slide free from the backpanel holes.

 R7800 bottom panel

Serial

port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:

The serial header is right at the edge of the circuitboard, so it can be accessed even while the cover is attached to the circuitboard. I bended sideways the three needed pins (ground, rx, tx) that are luckily nearest to the circuitboard’s edge, so that I could easily attach the serial cable. Using the markings in my USB-ttl converter, the pin order starting from the circuitboard’s edge is: ground, rx, tx, +3.3V

JTAG

port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port

Bootlogs

OEM bootlog

COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE


OpenWrt bootlog

Bootlog after a reset, OpenWrt master r7702-c72f3b5e2b:

Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0 Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 0.000000] Linux version 4.14.59 (perus@ub1804) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7451-6dac92a42e)) #0 SMP Tue Jul 31 16:45:59 2018 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000000] CPU: div instructions available: patching division code Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000000] OF: fdt: Machine model: Netgear Nighthawk X4S R7800 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000000] Memory policy: Data cache writealloc Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.000000] On node 0 totalpages: 122880 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat c0a25780, node_mem_map dda39000 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.000000] Normal zone: 960 pages used for memmap Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.000000] Normal zone: 122880 pages, LIFO batch:31 Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 0.000000] random: get_random_bytes called from start_kernel+0x88/0x408 with crng_init=0 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000000] percpu: Embedded 15 pages/cpu @dda01000 s29260 r8192 d23988 u61440 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.000000] pcpu-alloc: s29260 r8192 d23988 u61440 alloc=15*4096 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 121920 Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 0.000000] Kernel command line: Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000000] Memory: 477372K/491520K available (4734K kernel code, 152K rwdata, 1256K rodata, 1024K init, 244K bss, 14148K reserved, 0K cma-reserved, 0K highmem) Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 0.000000] Virtual kernel memory layout: Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB) Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB) Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 0.000000] .text : 0xc0208000 - 0xc079faf8 (5727 kB) Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB) Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 0.000000] .data : 0xc0a00000 - 0xc0a26080 ( 153 kB) Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 0.000000] .bss : 0xc0a28000 - 0xc0a65134 ( 245 kB) Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000000] Hierarchical RCU implementation. Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000020] Switching to timer-based delay loop, resolution 160ns Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000219] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500) Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000245] pid_max: default: 32768 minimum: 301 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000366] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000382] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.000946] CPU: Testing write buffer coherency: ok Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.001666] Setting up static identity map for 0x42300000 - 0x42300060 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.001817] Hierarchical SRCU implementation. Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.002528] smp: Bringing up secondary CPUs ... Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.004331] smp: Brought up 1 node, 2 CPUs Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.004347] SMP: Total of 2 processors activated (25.00 BogoMIPS). Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.004357] CPU: All CPU(s) started in SVC mode. Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.015160] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.015323] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.015346] futex hash table entries: 512 (order: 3, 32768 bytes) Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.015456] pinctrl core: initialized pinctrl subsystem Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.016443] NET: Registered protocol family 16 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.016684] DMA: preallocated 256 KiB pool for atomic coherent allocations Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.018044] cpuidle: using governor ladder Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.018106] cpuidle: using governor menu Tue Jul 31 19:46:20 2018 kern.err kernel: [ 0.039519] msm_bus_fabric_init_driver Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.040934] usbcore: registered new interface driver usbfs Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.041018] usbcore: registered new interface driver hub Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.041100] usbcore: registered new device driver usb Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.041158] pps_core: LinuxPPS API ver. 1 registered Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.041170] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.041202] PTP clock support registered Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.043052] clocksource: Switched to clocksource dg_timer Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.046338] NET: Registered protocol family 2 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.046881] TCP established hash table entries: 4096 (order: 2, 16384 bytes) Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.046920] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.046974] TCP: Hash tables configured (established 4096 bind 4096) Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.047060] UDP hash table entries: 256 (order: 1, 8192 bytes) Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.047084] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.047265] NET: Registered protocol family 1 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.047314] PCI: CLS 0 bytes, default 64 Tue Jul 31 19:46:20 2018 kern.warn kernel: [ 0.048414] No memory allocated for crashlog Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.048643] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.053632] squashfs: version 4.0 (2009/01/31) Phillip Lougher Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.053647] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.061896] io scheduler noop registered Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.061914] io scheduler deadline registered (default) Tue Jul 31 19:46:20 2018 kern.warn kernel: [ 0.063641] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator Tue Jul 31 19:46:20 2018 kern.warn kernel: [ 0.063767] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator Tue Jul 31 19:46:20 2018 kern.warn kernel: [ 0.063853] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.064615] OF: PCI: host bridge /soc/pci@1b500000 ranges: Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.064657] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.064682] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.172805] qcom-pcie 1b500000.pci: link up Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.172971] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.172993] pci_bus 0000:00: root bus resource [bus 00-ff] Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.173011] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff]) Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.173024] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff] Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.173039] pci_bus 0000:00: scanning bus Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.173088] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.173269] pci 0000:00:00.0: calling pci_fixup_ide_bases+0x0/0x44 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.173340] pci 0000:00:00.0: supports D1 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.173349] pci 0000:00:00.0: PME# supported from D0 D1 D3hot Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.173364] pci 0000:00:00.0: PME# disabled Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.173626] pci_bus 0000:00: fixups for bus Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.173648] PCI: bus0: Fast back to back transfers disabled Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.173669] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.173801] pci_bus 0000:01: scanning bus Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.173976] pci 0000:01:00.0: [168c:0046] type 00 class 0x028000 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.174328] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.174796] pci 0000:01:00.0: calling pci_fixup_ide_bases+0x0/0x44 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.175437] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.175478] pci 0000:01:00.0: PME# disabled Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.175811] pci_bus 0000:01: fixups for bus Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.175882] PCI: bus1: Fast back to back transfers disabled Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.175898] pci_bus 0000:01: bus scan returning with max=01 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.175916] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.175932] pci_bus 0000:00: bus scan returning with max=ff Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.175979] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff] Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.176002] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit] Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.176129] pci 0000:00:00.0: PCI bridge to [bus 01-ff] Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.176150] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff] Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.176192] pci 0000:00:00.0: calling qcom_pcie_fixup_final+0x0/0x94 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.176384] pcieport 0000:00:00.0: assign IRQ: got 67 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.176710] pcieport 0000:00:00.0: AER enabled with IRQ 35 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.176825] pci 0000:01:00.0: calling qcom_pcie_fixup_final+0x0/0x94 Tue Jul 31 19:46:20 2018 kern.warn kernel: [ 0.177254] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator Tue Jul 31 19:46:20 2018 kern.warn kernel: [ 0.177348] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator Tue Jul 31 19:46:20 2018 kern.warn kernel: [ 0.177453] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.178197] OF: PCI: host bridge /soc/pci@1b700000 ranges: Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.178234] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.178258] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.288173] qcom-pcie 1b700000.pci: link up Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.288322] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.288340] pci_bus 0001:00: root bus resource [bus 00-ff] Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.288355] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff] Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.288369] pci_bus 0001:00: scanning bus Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.288407] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.288484] pci 0001:00:00.0: calling pci_fixup_ide_bases+0x0/0x44 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.288546] pci 0001:00:00.0: supports D1 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.288557] pci 0001:00:00.0: PME# supported from D0 D1 D3hot Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.288569] pci 0001:00:00.0: PME# disabled Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.288814] pci_bus 0001:00: fixups for bus Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.288832] PCI: bus0: Fast back to back transfers disabled Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.288849] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.288967] pci_bus 0001:01: scanning bus Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.289153] pci 0001:01:00.0: [168c:0046] type 00 class 0x028000 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.289524] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.290027] pci 0001:01:00.0: calling pci_fixup_ide_bases+0x0/0x44 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.290719] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.290761] pci 0001:01:00.0: PME# disabled Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.291104] pci_bus 0001:01: fixups for bus Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.291181] PCI: bus1: Fast back to back transfers disabled Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.291194] pci_bus 0001:01: bus scan returning with max=01 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.291210] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.291228] pci_bus 0001:00: bus scan returning with max=ff Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.291265] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff] Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.291289] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit] Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.291421] pci 0001:00:00.0: PCI bridge to [bus 01-ff] Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.291439] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff] Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.291471] pci 0001:00:00.0: calling qcom_pcie_fixup_final+0x0/0x94 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.291656] pcieport 0001:00:00.0: assign IRQ: got 100 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.291936] pcieport 0001:00:00.0: AER enabled with IRQ 68 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 0.292050] pci 0001:01:00.0: calling qcom_pcie_fixup_final+0x0/0x94 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.294396] L2 @ QSB rate. Forcing new rate. Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.294604] L2 @ 384000 KHz Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.294772] CPU0 @ 800000 KHz Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.294785] CPU1 @ QSB rate. Forcing new rate. Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.294902] CPU1 @ 384000 KHz Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.298799] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.300716] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.301550] msm_serial 16340000.serial: msm_serial: detected port #0 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.301649] msm_serial 16340000.serial: uartclk = 7372800 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.301726] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 101, base_baud = 460800) is a MSM Tue Jul 31 19:46:20 2018 kern.info kernel: [ 0.301765] msm_serial: console setup on port #0 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 1.022992] console [ttyMSM0] enabled Tue Jul 31 19:46:20 2018 kern.info kernel: [ 1.027858] msm_serial: driver initialized Tue Jul 31 19:46:20 2018 kern.info kernel: [ 1.036426] loop: module loaded Tue Jul 31 19:46:20 2018 kern.info kernel: [ 1.038459] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xa1 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 1.038496] nand: Micron MT29F1G08ABBEAH4 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 1.045084] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 1.048987] 8 fixed-partitions partitions found on MTD device qcom_nand.0 Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 1.056420] Creating 8 MTD partitions on "qcom_nand.0": Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 1.063208] 0x000000000000-0x000000c80000 : "qcadata" Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 1.073053] random: fast init done Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 1.090307] 0x000000c80000-0x000001180000 : "APPSBL" Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 1.099383] 0x000001180000-0x000001200000 : "APPSBLENV" Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 1.101012] 0x000001200000-0x000001340000 : "art" Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 1.106331] 0x000001340000-0x000001480000 : "artbak" Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 1.111127] 0x000001480000-0x000001880000 : "kernel" Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 1.120734] 0x000001880000-0x000007900000 : "ubi" Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 1.281990] 0x000007900000-0x000008000000 : "reserve" Tue Jul 31 19:46:20 2018 kern.info kernel: [ 1.295638] libphy: GPIO Bitbanged MDIO: probed Tue Jul 31 19:46:20 2018 kern.info kernel: [ 1.319989] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.247800] libphy: Fixed MDIO Bus: probed Tue Jul 31 19:46:20 2018 kern.warn kernel: [ 2.250668] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.251251] stmmac - user ID: 0x10, Synopsys ID: 0x37 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.257442] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.262352] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.268540] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.276510] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.284084] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.290997] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.298972] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.304813] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.312094] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer Tue Jul 31 19:46:20 2018 kern.warn kernel: [ 2.320948] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.327853] stmmac - user ID: 0x10, Synopsys ID: 0x37 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.333900] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.338824] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.344989] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.352888] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.360546] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.367578] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.375447] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.381188] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.388665] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.396409] i2c /dev entries driver Tue Jul 31 19:46:20 2018 kern.err kernel: [ 2.405243] Calibration not found. Tue Jul 31 19:46:20 2018 kern.err kernel: [ 2.407137] qcom-tsens 900000.thermal-sensor: tsens calibration failed Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.412246] Speed bin: 0 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.417242] PVS bin: 4 Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 2.421610] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 2.422081] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.430019] sdhci: Secure Digital Host Controller Interface driver Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.436576] sdhci: Copyright(c) Pierre Ossman Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.442722] sdhci-pltfm: SDHCI platform and OF driver helper Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.449667] NET: Registered protocol family 10 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.455128] Segment Routing with IPv6 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.457257] NET: Registered protocol family 17 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.461471] 8021q: 802.1Q VLAN Support v1.8 Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 2.465398] Registering SWP/SWPB emulation handler Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.486705] qcom_rpm 108000.rpm: RPM firmware 3.0.16777364 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.501094] s1a: supplied by regulator-dummy Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.501215] s1a: Bringing 0uV into 1050000-1050000uV Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.504948] s1b: supplied by regulator-dummy Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.509483] s1b: Bringing 0uV into 1050000-1050000uV Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.514132] s2a: supplied by regulator-dummy Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.518658] s2a: Bringing 0uV into 775000-775000uV Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.523214] s2b: supplied by regulator-dummy Tue Jul 31 19:46:20 2018 kern.info kernel: [ 2.527629] s2b: Bringing 0uV into 775000-775000uV Tue Jul 31 19:46:20 2018 kern.warn kernel: [ 2.533373] thermal thermal_zone0: failed to read out thermal zone (-110) Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 2.541761] UBI: auto-attach mtd6 Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 2.543330] ubi0: attaching mtd6 Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 2.600056] random: crng init done Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 3.279844] ubi0: scanning is finished Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 3.289609] ubi0: attached mtd6 (name "ubi", size 96 MiB) Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 3.289628] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 3.294047] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 3.300745] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 3.307668] ubi0: good PEBs: 772, bad PEBs: 0, corrupted PEBs: 0 Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 3.314441] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 3.320627] ubi0: max/mean erase counter: 8/4, WL threshold: 4096, image sequence number: 612588581 Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 3.327719] ubi0: available PEBs: 0, total reserved PEBs: 772, PEBs reserved for bad PEB handling: 20 Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 3.336852] ubi0: background thread "ubi_bgt0d" started, PID 60 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 3.346570] block ubiblock0_0: created from ubi0:0(rootfs) Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 3.351700] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem Tue Jul 31 19:46:20 2018 kern.info kernel: [ 3.357342] hctosys: unable to open rtc device (rtc0) Tue Jul 31 19:46:20 2018 kern.info kernel: [ 3.368883] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. Tue Jul 31 19:46:20 2018 kern.info kernel: [ 3.370048] Freeing unused kernel memory: 1024K Tue Jul 31 19:46:20 2018 user.info kernel: [ 3.867010] init: Console is alive Tue Jul 31 19:46:20 2018 user.info kernel: [ 3.867127] init: - watchdog - Tue Jul 31 19:46:20 2018 user.info kernel: [ 4.899531] kmodloader: loading kernel modules from /etc/modules-boot.d/* Tue Jul 31 19:46:20 2018 kern.info kernel: [ 4.969396] exFAT: Version 1.2.9 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 4.981062] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 4.983985] SCSI subsystem initialized Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 4.989867] libata version 3.00 loaded. Tue Jul 31 19:46:20 2018 kern.info kernel: [ 4.992962] ahci 29000000.sata: forcing port_map 0x0 -> 0x1 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 4.993022] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode Tue Jul 31 19:46:20 2018 kern.info kernel: [ 4.997423] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.006728] scsi host0: ahci Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.014487] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 26 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.346109] ata1: SATA link down (SStatus 0 SControl 300) Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.348412] ehci-platform: EHCI generic platform driver Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.354482] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.356153] ohci-platform: OHCI generic platform driver Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.492443] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.492521] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.497203] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.504562] xhci-hcd xhci-hcd.0.auto: irq 105, io mem 0x11000000 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.513781] hub 1-0:1.0: USB hub found Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.519419] hub 1-0:1.0: 1 port detected Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.523066] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.527034] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.532244] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.539953] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.546765] hub 2-0:1.0: USB hub found Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.554813] hub 2-0:1.0: 1 port detected Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.558511] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.562370] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.567874] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.575308] xhci-hcd xhci-hcd.1.auto: irq 106, io mem 0x10000000 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.584345] hub 3-0:1.0: USB hub found Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.590176] hub 3-0:1.0: 1 port detected Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.593920] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.597784] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.603078] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.610769] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.617633] hub 4-0:1.0: USB hub found Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.625667] hub 4-0:1.0: 1 port detected Tue Jul 31 19:46:20 2018 kern.info kernel: [ 5.631566] usbcore: registered new interface driver usb-storage Tue Jul 31 19:46:20 2018 user.info kernel: [ 5.633280] kmodloader: done loading kernel modules from /etc/modules-boot.d/* Tue Jul 31 19:46:20 2018 user.info kernel: [ 5.641192] init: - preinit - Tue Jul 31 19:46:20 2018 kern.info kernel: [ 7.366764] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL) Tue Jul 31 19:46:20 2018 kern.info kernel: [ 7.368319] dwmac1000: Master AXI performs any burst length Tue Jul 31 19:46:20 2018 kern.info kernel: [ 7.375790] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported Tue Jul 31 19:46:20 2018 kern.info kernel: [ 7.381247] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock Tue Jul 31 19:46:20 2018 kern.info kernel: [ 7.391102] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready Tue Jul 31 19:46:20 2018 kern.info kernel: [ 8.483502] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off Tue Jul 31 19:46:20 2018 kern.info kernel: [ 8.483584] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready Tue Jul 31 19:46:20 2018 user.info kernel: [ 13.605441] mount_root: loading kmods from internal overlay Tue Jul 31 19:46:20 2018 user.info kernel: [ 13.643025] kmodloader: loading kernel modules from //etc/modules-boot.d/* Tue Jul 31 19:46:20 2018 user.info kernel: [ 13.646035] kmodloader: done loading kernel modules from //etc/modules-boot.d/* Tue Jul 31 19:46:20 2018 kern.err kernel: [ 13.692888] print_req_error: I/O error, dev mtdblock0, sector 0 Tue Jul 31 19:46:20 2018 kern.err kernel: [ 13.693610] print_req_error: I/O error, dev mtdblock0, sector 8 Tue Jul 31 19:46:20 2018 kern.err kernel: [ 13.698265] print_req_error: I/O error, dev mtdblock0, sector 16 Tue Jul 31 19:46:20 2018 kern.err kernel: [ 13.704256] print_req_error: I/O error, dev mtdblock0, sector 24 Tue Jul 31 19:46:20 2018 kern.err kernel: [ 13.710578] print_req_error: I/O error, dev mtdblock0, sector 0 Tue Jul 31 19:46:20 2018 kern.err kernel: [ 13.715767] Buffer I/O error on dev mtdblock0, logical block 0, async page read Tue Jul 31 19:46:20 2018 kern.err kernel: [ 13.963432] print_req_error: I/O error, dev mtdblock0, sector 0 Tue Jul 31 19:46:20 2018 kern.err kernel: [ 13.963465] Buffer I/O error on dev mtdblock0, logical block 0, async page read Tue Jul 31 19:46:20 2018 kern.err kernel: [ 13.973437] print_req_error: I/O error, dev mtdblock1, sector 0 Tue Jul 31 19:46:20 2018 kern.err kernel: [ 13.983430] print_req_error: I/O error, dev mtdblock1, sector 8 Tue Jul 31 19:46:20 2018 kern.err kernel: [ 13.983957] print_req_error: I/O error, dev mtdblock1, sector 16 Tue Jul 31 19:46:20 2018 kern.err kernel: [ 13.988649] print_req_error: I/O error, dev mtdblock1, sector 24 Tue Jul 31 19:46:20 2018 kern.err kernel: [ 14.013485] Buffer I/O error on dev mtdblock1, logical block 0, async page read Tue Jul 31 19:46:20 2018 kern.err kernel: [ 14.034625] Buffer I/O error on dev mtdblock1, logical block 0, async page read Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 14.576704] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 148 Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 14.713623] UBIFS (ubi0:1): recovery needed Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 15.040792] UBIFS (ubi0:1): recovery completed Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 15.040909] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 15.044213] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 15.052031] UBIFS (ubi0:1): FS size: 86978560 bytes (82 MiB, 685 LEBs), journal size 4317184 bytes (4 MiB, 34 LEBs) Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 15.062006] UBIFS (ubi0:1): reserved for root: 4108212 bytes (4011 KiB) Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 15.072248] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID F6160FAA-DB75-4CA6-B3F4-B39812D42623, small LPT model Tue Jul 31 19:46:20 2018 user.info kernel: [ 15.083945] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab Tue Jul 31 19:46:20 2018 user.err kernel: [ 15.090351] block: unable to load configuration (fstab: Entry not found) Tue Jul 31 19:46:20 2018 user.info kernel: [ 15.097189] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab Tue Jul 31 19:46:20 2018 user.err kernel: [ 15.104160] block: unable to load configuration (fstab: Entry not found) Tue Jul 31 19:46:20 2018 user.info kernel: [ 15.110329] block: attempting to load /etc/config/fstab Tue Jul 31 19:46:20 2018 user.info kernel: [ 15.140364] block: extroot: not configured Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 15.203687] UBIFS (ubi0:1): un-mount UBI device 0 Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 15.203780] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 15.214462] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 149 Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 15.390821] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 15.390852] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 15.397776] UBIFS (ubi0:1): FS size: 86978560 bytes (82 MiB, 685 LEBs), journal size 4317184 bytes (4 MiB, 34 LEBs) Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 15.407616] UBIFS (ubi0:1): reserved for root: 4108212 bytes (4011 KiB) Tue Jul 31 19:46:20 2018 kern.notice kernel: [ 15.417851] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID F6160FAA-DB75-4CA6-B3F4-B39812D42623, small LPT model Tue Jul 31 19:46:20 2018 kern.err kernel: [ 15.435233] Buffer I/O error on dev mtdblock0, logical block 0, async page read Tue Jul 31 19:46:20 2018 kern.err kernel: [ 15.440007] Buffer I/O error on dev mtdblock0, logical block 0, async page read Tue Jul 31 19:46:20 2018 kern.err kernel: [ 15.445738] Buffer I/O error on dev mtdblock1, logical block 0, async page read Tue Jul 31 19:46:20 2018 kern.err kernel: [ 15.454087] Buffer I/O error on dev mtdblock1, logical block 0, async page read Tue Jul 31 19:46:20 2018 user.info kernel: [ 16.049946] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab Tue Jul 31 19:46:20 2018 user.err kernel: [ 16.050076] block: unable to load configuration (fstab: Entry not found) Tue Jul 31 19:46:20 2018 user.info kernel: [ 16.055891] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab Tue Jul 31 19:46:20 2018 user.err kernel: [ 16.062775] block: unable to load configuration (fstab: Entry not found) Tue Jul 31 19:46:20 2018 user.info kernel: [ 16.069151] block: attempting to load /etc/config/fstab Tue Jul 31 19:46:20 2018 user.info kernel: [ 16.076252] block: extroot: not configured Tue Jul 31 19:46:20 2018 user.info kernel: [ 16.136129] mount_root: overlay filesystem has not been fully initialized yet Tue Jul 31 19:46:20 2018 user.info kernel: [ 16.142008] mount_root: switching to ubifs overlay Tue Jul 31 19:46:20 2018 user.warn kernel: [ 16.178882] urandom-seed: Seed file not found (/etc/urandom.seed) Tue Jul 31 19:46:20 2018 user.info kernel: [ 16.290466] procd: - early - Tue Jul 31 19:46:20 2018 user.info kernel: [ 16.290608] procd: - watchdog - Tue Jul 31 19:46:20 2018 user.info kernel: [ 16.912076] procd: - watchdog - Tue Jul 31 19:46:20 2018 user.info kernel: [ 16.912444] procd: - ubus - Tue Jul 31 19:46:20 2018 user.info kernel: [ 17.089287] procd: - init - Tue Jul 31 19:46:20 2018 user.info kernel: [ 17.361755] kmodloader: loading kernel modules from /etc/modules.d/* Tue Jul 31 19:46:20 2018 kern.info kernel: [ 17.383009] tun: Universal TUN/TAP device driver, 1.6 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 17.386056] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Tue Jul 31 19:46:20 2018 kern.info kernel: [ 17.390189] gre: GRE over IPv4 demultiplexor driver Tue Jul 31 19:46:20 2018 kern.info kernel: [ 17.393837] ip_gre: GRE over IPv4 tunneling driver Tue Jul 31 19:46:20 2018 kern.info kernel: [ 17.403086] ip6_tables: (C) 2000-2006 Netfilter Core Team Tue Jul 31 19:46:20 2018 kern.info kernel: [ 17.754483] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) Tue Jul 31 19:46:20 2018 kern.info kernel: [ 17.946661] Netfilter messages via NETLINK v0.30. Tue Jul 31 19:46:20 2018 kern.info kernel: [ 17.948071] ip_set: protocol 6 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 17.976267] u32 classifier Tue Jul 31 19:46:20 2018 kern.info kernel: [ 17.976296] input device check on Tue Jul 31 19:46:20 2018 kern.info kernel: [ 17.977863] Actions configured Tue Jul 31 19:46:20 2018 kern.info kernel: [ 17.983232] Mirror/redirect action on Tue Jul 31 19:46:20 2018 kern.info kernel: [ 17.991676] fuse init (API version 7.26) Tue Jul 31 19:46:20 2018 kern.info kernel: [ 17.996664] usbcore: registered new interface driver chaoskey Tue Jul 31 19:46:20 2018 kern.info kernel: [ 17.997805] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 18.001392] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d Tue Jul 31 19:46:20 2018 kern.info kernel: [ 18.011951] ip_tables: (C) 2000-2006 Netfilter Core Team Tue Jul 31 19:46:20 2018 kern.info kernel: [ 18.365326] ctnetlink v0.93: registering with nfnetlink. Tue Jul 31 19:46:20 2018 kern.warn kernel: [ 18.504792] nf_conntrack_rtsp v0.7 loading Tue Jul 31 19:46:20 2018 kern.warn kernel: [ 18.538201] nf_nat_rtsp v0.7 loading Tue Jul 31 19:46:20 2018 kern.info kernel: [ 18.542476] usbcore: registered new interface driver usbserial Tue Jul 31 19:46:20 2018 kern.info kernel: [ 18.542552] usbcore: registered new interface driver usbserial_generic Tue Jul 31 19:46:20 2018 kern.info kernel: [ 18.547382] usbserial: USB Serial support registered for generic Tue Jul 31 19:46:20 2018 kern.info kernel: [ 18.586478] xt_time: kernel timezone is -0000 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 18.788018] PPP generic driver version 2.4.2 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 18.789383] PPP MPPE Compression module registered Tue Jul 31 19:46:20 2018 kern.info kernel: [ 18.792383] NET: Registered protocol family 24 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 18.796972] PPTP driver version 0.8.5 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 18.809377] ath10k_pci 0000:01:00.0: assign IRQ: got 67 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 18.809937] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142) Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 18.810029] ath10k_pci 0000:01:00.0: enabling bus mastering Tue Jul 31 19:46:20 2018 kern.info kernel: [ 18.810538] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 Tue Jul 31 19:46:20 2018 kern.warn kernel: [ 18.985997] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2 Tue Jul 31 19:46:20 2018 kern.warn kernel: [ 18.986042] ath10k_pci 0000:01:00.0: Falling back to user helper Tue Jul 31 19:46:20 2018 kern.warn kernel: [ 19.207002] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2 Tue Jul 31 19:46:20 2018 kern.warn kernel: [ 19.207061] ath10k_pci 0000:01:00.0: Falling back to user helper Tue Jul 31 19:46:20 2018 kern.err kernel: [ 19.232887] firmware ath10k!QCA9984!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed Tue Jul 31 19:46:20 2018 kern.info kernel: [ 19.562977] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe Tue Jul 31 19:46:20 2018 kern.info kernel: [ 19.563008] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 19.573896] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00053 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32 4c56a386 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 21.850514] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:1 crc32 dd6d039c Tue Jul 31 19:46:20 2018 kern.info kernel: [ 27.762445] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 27.855991] ath: EEPROM regdomain: 0x0 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 27.855999] ath: EEPROM indicates default country code should be used Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 27.856006] ath: doing EEPROM country->regdmn map search Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 27.856019] ath: country maps to regdmn code: 0x3a Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 27.856028] ath: Country alpha2 being used: US Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 27.856034] ath: Regpair used: 0x3a Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 27.859347] ath10k_pci 0001:01:00.0: assign IRQ: got 100 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 27.859926] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142) Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 27.860037] ath10k_pci 0001:01:00.0: enabling bus mastering Tue Jul 31 19:46:20 2018 kern.info kernel: [ 27.860611] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 Tue Jul 31 19:46:20 2018 kern.warn kernel: [ 28.040571] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2 Tue Jul 31 19:46:20 2018 kern.warn kernel: [ 28.040661] ath10k_pci 0001:01:00.0: Falling back to user helper Tue Jul 31 19:46:20 2018 kern.warn kernel: [ 28.587583] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2 Tue Jul 31 19:46:20 2018 kern.warn kernel: [ 28.587632] ath10k_pci 0001:01:00.0: Falling back to user helper Tue Jul 31 19:46:20 2018 kern.err kernel: [ 28.634257] firmware ath10k!QCA9984!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed Tue Jul 31 19:46:20 2018 kern.info kernel: [ 28.634474] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe Tue Jul 31 19:46:20 2018 kern.info kernel: [ 28.642124] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 28.655517] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00053 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32 4c56a386 Tue Jul 31 19:46:20 2018 kern.info kernel: [ 30.933096] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:2 crc32 dd6d039c Tue Jul 31 19:46:20 2018 kern.info kernel: [ 36.842936] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 36.936632] ath: EEPROM regdomain: 0x0 Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 36.936642] ath: EEPROM indicates default country code should be used Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 36.936650] ath: doing EEPROM country->regdmn map search Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 36.936665] ath: country maps to regdmn code: 0x3a Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 36.936676] ath: Country alpha2 being used: US Tue Jul 31 19:46:20 2018 kern.debug kernel: [ 36.936684] ath: Regpair used: 0x3a Tue Jul 31 19:46:20 2018 user.info kernel: [ 36.943847] kmodloader: done loading kernel modules from /etc/modules.d/* Tue Jul 31 19:46:21 2018 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses! Tue Jul 31 19:46:21 2018 user.notice dnsmasq: Allowing 127.0.0.0/8 responses Tue Jul 31 19:46:21 2018 daemon.info dnsmasq[1317]: started, version 2.80test3 cachesize 1000 Tue Jul 31 19:46:21 2018 daemon.info dnsmasq[1317]: DNS service limited to local subnets Tue Jul 31 19:46:21 2018 daemon.info dnsmasq[1317]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile Tue Jul 31 19:46:21 2018 daemon.info dnsmasq[1317]: using local addresses only for domain test Tue Jul 31 19:46:21 2018 daemon.info dnsmasq[1317]: using local addresses only for domain onion Tue Jul 31 19:46:21 2018 daemon.info dnsmasq[1317]: using local addresses only for domain localhost Tue Jul 31 19:46:21 2018 daemon.info dnsmasq[1317]: using local addresses only for domain local Tue Jul 31 19:46:21 2018 daemon.info dnsmasq[1317]: using local addresses only for domain invalid Tue Jul 31 19:46:21 2018 daemon.info dnsmasq[1317]: using local addresses only for domain bind Tue Jul 31 19:46:21 2018 daemon.info dnsmasq[1317]: using local addresses only for domain lan Tue Jul 31 19:46:21 2018 daemon.warn dnsmasq[1317]: no servers found in /tmp/resolv.conf.auto, will retry Tue Jul 31 19:46:21 2018 daemon.info dnsmasq[1317]: read /etc/hosts - 4 addresses Tue Jul 31 19:46:21 2018 daemon.info dnsmasq[1317]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses Tue Jul 31 19:46:24 2018 user.notice : Added device handler type: 8021ad Tue Jul 31 19:46:24 2018 user.notice : Added device handler type: 8021q Tue Jul 31 19:46:24 2018 user.notice : Added device handler type: macvlan Tue Jul 31 19:46:24 2018 user.notice : Added device handler type: veth Tue Jul 31 19:46:24 2018 user.notice : Added device handler type: bridge Tue Jul 31 19:46:24 2018 user.notice : Added device handler type: Network device Tue Jul 31 19:46:24 2018 user.notice : Added device handler type: tunnel Tue Jul 31 19:46:24 2018 daemon.notice procd: /etc/init.d/network: 'radio0' is disabled Tue Jul 31 19:46:24 2018 daemon.notice procd: /etc/init.d/network: 'radio1' is disabled Tue Jul 31 19:46:24 2018 daemon.notice procd: /etc/init.d/network: 'radio0' is disabled Tue Jul 31 19:46:24 2018 daemon.notice procd: /etc/init.d/network: 'radio1' is disabled Tue Jul 31 19:46:24 2018 kern.warn kernel: [ 42.892958] print_req_error: 14 callbacks suppressed Tue Jul 31 19:46:24 2018 kern.err kernel: [ 42.892964] print_req_error: I/O error, dev mtdblock0, sector 0 Tue Jul 31 19:46:24 2018 kern.err kernel: [ 42.898213] print_req_error: I/O error, dev mtdblock0, sector 8 Tue Jul 31 19:46:24 2018 kern.err kernel: [ 42.903153] print_req_error: I/O error, dev mtdblock0, sector 16 Tue Jul 31 19:46:24 2018 kern.err kernel: [ 42.909248] print_req_error: I/O error, dev mtdblock0, sector 24 Tue Jul 31 19:46:24 2018 kern.err kernel: [ 42.930678] print_req_error: I/O error, dev mtdblock0, sector 0 Tue Jul 31 19:46:24 2018 kern.err kernel: [ 42.930712] Buffer I/O error on dev mtdblock0, logical block 0, async page read Tue Jul 31 19:46:24 2018 kern.err kernel: [ 42.940858] print_req_error: I/O error, dev mtdblock0, sector 0 Tue Jul 31 19:46:24 2018 kern.err kernel: [ 42.942700] Buffer I/O error on dev mtdblock0, logical block 0, async page read Tue Jul 31 19:46:24 2018 kern.err kernel: [ 42.953298] print_req_error: I/O error, dev mtdblock1, sector 0 Tue Jul 31 19:46:24 2018 kern.err kernel: [ 42.963462] print_req_error: I/O error, dev mtdblock1, sector 8 Tue Jul 31 19:46:24 2018 kern.err kernel: [ 42.973423] print_req_error: I/O error, dev mtdblock1, sector 16 Tue Jul 31 19:46:24 2018 kern.err kernel: [ 42.973912] print_req_error: I/O error, dev mtdblock1, sector 24 Tue Jul 31 19:46:24 2018 kern.err kernel: [ 42.979079] Buffer I/O error on dev mtdblock1, logical block 0, async page read Tue Jul 31 19:46:24 2018 kern.err kernel: [ 43.004032] Buffer I/O error on dev mtdblock1, logical block 0, async page read Tue Jul 31 19:46:25 2018 daemon.err block: No "mount.ubi" utility available Tue Jul 31 19:46:25 2018 daemon.err block: mounting /dev/mtdblock6 (ubi) as /mnt/mtdblock6 failed (2) - No such file or directory Tue Jul 31 19:46:25 2018 daemon.err block: /dev/ubiblock0_0 is already mounted on /rom Tue Jul 31 19:46:25 2018 daemon.err block: /dev/ubi0_1 is already mounted on /overlay Tue Jul 31 19:46:26 2018 kern.info kernel: [ 44.835975] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL) Tue Jul 31 19:46:26 2018 kern.info kernel: [ 44.836979] dwmac1000: Master AXI performs any burst length Tue Jul 31 19:46:26 2018 kern.info kernel: [ 44.845011] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported Tue Jul 31 19:46:26 2018 kern.info kernel: [ 44.850390] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock Tue Jul 31 19:46:26 2018 kern.info kernel: [ 44.859499] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready Tue Jul 31 19:46:26 2018 kern.info kernel: [ 44.875462] br-lan: port 1(eth1.1) entered blocking state Tue Jul 31 19:46:26 2018 kern.info kernel: [ 44.875495] br-lan: port 1(eth1.1) entered disabled state Tue Jul 31 19:46:26 2018 kern.info kernel: [ 44.880088] device eth1.1 entered promiscuous mode Tue Jul 31 19:46:26 2018 kern.info kernel: [ 44.885325] device eth1 entered promiscuous mode Tue Jul 31 19:46:26 2018 daemon.notice netifd: Interface 'lan' is enabled Tue Jul 31 19:46:26 2018 daemon.notice netifd: Interface 'lan' is setting up now Tue Jul 31 19:46:26 2018 kern.info kernel: [ 44.902846] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready Tue Jul 31 19:46:26 2018 daemon.notice netifd: Interface 'lan' is now up Tue Jul 31 19:46:26 2018 daemon.notice netifd: Interface 'loopback' is enabled Tue Jul 31 19:46:26 2018 daemon.notice netifd: Interface 'loopback' is setting up now Tue Jul 31 19:46:26 2018 daemon.notice netifd: Interface 'loopback' is now up Tue Jul 31 19:46:26 2018 kern.info kernel: [ 44.925687] Generic PHY fixed-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:00, irq=POLL) Tue Jul 31 19:46:26 2018 kern.info kernel: [ 44.926686] dwmac1000: Master AXI performs any burst length Tue Jul 31 19:46:26 2018 kern.info kernel: [ 44.934788] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported Tue Jul 31 19:46:26 2018 kern.info kernel: [ 44.940170] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock Tue Jul 31 19:46:26 2018 kern.info kernel: [ 44.949608] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Tue Jul 31 19:46:26 2018 daemon.notice netifd: Interface 'wan' is enabled Tue Jul 31 19:46:26 2018 daemon.notice netifd: Interface 'wan6' is enabled Tue Jul 31 19:46:26 2018 kern.info kernel: [ 44.969196] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready Tue Jul 31 19:46:26 2018 daemon.notice netifd: Network device 'lo' link is up Tue Jul 31 19:46:26 2018 daemon.notice netifd: Interface 'loopback' has link connectivity Tue Jul 31 19:46:26 2018 daemon.notice procd: /etc/rc.d/S50uhttpd: 4+0 records in Tue Jul 31 19:46:26 2018 daemon.notice procd: /etc/rc.d/S50uhttpd: 4+0 records out Tue Jul 31 19:46:27 2018 user.notice firewall: Reloading firewall due to ifup of lan (br-lan) Tue Jul 31 19:46:27 2018 daemon.notice procd: /etc/rc.d/S50uhttpd: Generating a 2048 bit RSA private key Tue Jul 31 19:46:27 2018 authpriv.warn dropbear[1846]: Failed loading /etc/dropbear/dropbear_ecdsa_host_key Tue Jul 31 19:46:27 2018 authpriv.info dropbear[1846]: Not backgrounding Tue Jul 31 19:46:27 2018 kern.info kernel: [ 45.913573] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off Tue Jul 31 19:46:27 2018 kern.info kernel: [ 45.916042] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready Tue Jul 31 19:46:27 2018 daemon.notice netifd: Network device 'eth1' link is up Tue Jul 31 19:46:27 2018 daemon.notice netifd: VLAN 'eth1.1' link is up Tue Jul 31 19:46:27 2018 kern.info kernel: [ 45.933611] br-lan: port 1(eth1.1) entered blocking state Tue Jul 31 19:46:27 2018 kern.info kernel: [ 45.933664] br-lan: port 1(eth1.1) entered forwarding state Tue Jul 31 19:46:27 2018 kern.info kernel: [ 45.942803] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready Tue Jul 31 19:46:27 2018 daemon.notice netifd: bridge 'br-lan' link is up Tue Jul 31 19:46:27 2018 daemon.notice netifd: Interface 'lan' has link connectivity Tue Jul 31 19:46:27 2018 daemon.notice netifd: Network device 'eth0' link is up Tue Jul 31 19:46:27 2018 kern.info kernel: [ 45.993516] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off Tue Jul 31 19:46:27 2018 kern.info kernel: [ 45.993579] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Tue Jul 31 19:46:27 2018 daemon.notice netifd: VLAN 'eth0.2' link is up Tue Jul 31 19:46:27 2018 daemon.notice netifd: Interface 'wan' has link connectivity Tue Jul 31 19:46:27 2018 daemon.notice netifd: Interface 'wan' is setting up now Tue Jul 31 19:46:27 2018 daemon.notice netifd: Interface 'wan6' has link connectivity Tue Jul 31 19:46:27 2018 daemon.notice netifd: Interface 'wan6' is setting up now Tue Jul 31 19:46:27 2018 kern.info kernel: [ 46.006494] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready Tue Jul 31 19:46:27 2018 daemon.notice netifd: wan (1922): udhcpc: started, v1.29.2 Tue Jul 31 19:46:27 2018 daemon.err odhcp6c[1917]: Failed to send RS (Address not available) Tue Jul 31 19:46:28 2018 daemon.notice netifd: wan (1922): udhcpc: sending discover Tue Jul 31 19:46:28 2018 daemon.notice netifd: wan (1922): udhcpc: sending select for 87.92.11.11 Tue Jul 31 19:46:28 2018 daemon.notice netifd: wan (1922): udhcpc: lease of 87.92.11.11 obtained, lease time 18000 Tue Jul 31 19:46:28 2018 daemon.notice procd: /etc/rc.d/S50uhttpd: ................................................................................+++ Tue Jul 31 19:46:28 2018 daemon.notice netifd: Interface 'wan' is now up Tue Jul 31 19:46:28 2018 daemon.info dnsmasq[1317]: reading /tmp/resolv.conf.auto Tue Jul 31 19:46:28 2018 daemon.info dnsmasq[1317]: using local addresses only for domain test Tue Jul 31 19:46:28 2018 daemon.info dnsmasq[1317]: using local addresses only for domain onion Tue Jul 31 19:46:28 2018 daemon.info dnsmasq[1317]: using local addresses only for domain localhost Tue Jul 31 19:46:28 2018 daemon.info dnsmasq[1317]: using local addresses only for domain local Tue Jul 31 19:46:28 2018 daemon.info dnsmasq[1317]: using local addresses only for domain invalid Tue Jul 31 19:46:28 2018 daemon.info dnsmasq[1317]: using local addresses only for domain bind Tue Jul 31 19:46:28 2018 daemon.info dnsmasq[1317]: using local addresses only for domain lan Tue Jul 31 19:46:28 2018 daemon.info dnsmasq[1317]: using nameserver 62.241.198.246#53 Tue Jul 31 19:46:28 2018 daemon.info dnsmasq[1317]: using nameserver 62.241.198.245#53 Tue Jul 31 19:46:28 2018 daemon.notice procd: /etc/rc.d/S50uhttpd: ...............+++ Tue Jul 31 19:46:28 2018 daemon.notice procd: /etc/rc.d/S50uhttpd: writing new private key to '/etc/uhttpd.key.new' Tue Jul 31 19:46:28 2018 daemon.notice procd: /etc/rc.d/S50uhttpd: ----- Tue Jul 31 19:46:28 2018 daemon.err odhcp6c[1917]: Failed to send DHCPV6 message to ff02::1:2 (Address not available) Tue Jul 31 19:46:29 2018 daemon.warn odhcpd[1510]: DHCPV6 SOLICIT IA_NA from 000100011b8be1ec7824af3a801c on br-lan: ok fd13:9661:5bef::63d/128 Tue Jul 31 19:46:29 2018 daemon.info dnsmasq[1317]: read /etc/hosts - 4 addresses Tue Jul 31 19:46:29 2018 daemon.info dnsmasq[1317]: read /tmp/hosts/dhcp.cfg01411c.1862 - 0 addresses Tue Jul 31 19:46:29 2018 daemon.info dnsmasq[1317]: read /tmp/hosts/odhcpd - 0 addresses Tue Jul 31 19:46:29 2018 daemon.info dnsmasq[1317]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses Tue Jul 31 19:46:30 2018 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp Tue Jul 31 19:46:30 2018 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/radvd Tue Jul 31 19:46:30 2018 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network Tue Jul 31 19:46:30 2018 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash Tue Jul 31 19:46:30 2018 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos Tue Jul 31 19:46:30 2018 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd Tue Jul 31 19:46:30 2018 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/sqm Tue Jul 31 19:46:30 2018 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd Tue Jul 31 19:46:30 2018 daemon.warn odhcpd[1510]: DHCPV6 REQUEST IA_NA from 000100011b8be1ec7824af3a801c on br-lan: ok fd13:9661:5bef::63d/128 Tue Jul 31 19:46:30 2018 user.notice firewall: Reloading firewall due to ifup of wan (eth0.2) Tue Jul 31 19:46:30 2018 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount Tue Jul 31 19:46:30 2018 daemon.info dnsmasq[1317]: read /etc/hosts - 4 addresses Tue Jul 31 19:46:30 2018 daemon.info dnsmasq[1317]: read /tmp/hosts/dhcp.cfg01411c.1862 - 0 addresses Tue Jul 31 19:46:30 2018 daemon.info dnsmasq[1317]: read /tmp/hosts/odhcpd - 1 addresses Tue Jul 31 19:46:30 2018 daemon.info dnsmasq[1317]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses Tue Jul 31 19:46:30 2018 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led Tue Jul 31 19:46:30 2018 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics Tue Jul 31 19:46:30 2018 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp Tue Jul 31 19:46:31 2018 user.notice ucitrack: Setting up /etc/config/upnpd reload trigger for non-procd /etc/init.d/miniupnpd Tue Jul 31 19:46:31 2018 user.notice ucitrack: Setting up /etc/config/bcp38 reload dependency on /etc/config/firewall Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[1317]: exiting on receipt of SIGTERM Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: started, version 2.80test3 cachesize 1000 Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: DNS service limited to local subnets Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile Tue Jul 31 19:46:31 2018 daemon.info dnsmasq-dhcp[2944]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: using local addresses only for domain test Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: using local addresses only for domain onion Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: using local addresses only for domain localhost Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: using local addresses only for domain local Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: using local addresses only for domain invalid Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: using local addresses only for domain bind Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: using local addresses only for domain lan Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: reading /tmp/resolv.conf.auto Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: using local addresses only for domain test Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: using local addresses only for domain onion Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: using local addresses only for domain localhost Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: using local addresses only for domain local Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: using local addresses only for domain invalid Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: using local addresses only for domain bind Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: using local addresses only for domain lan Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: using nameserver 62.241.198.246#53 Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: using nameserver 62.241.198.245#53 Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: read /etc/hosts - 4 addresses Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: read /tmp/hosts/odhcpd - 1 addresses Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses Tue Jul 31 19:46:31 2018 daemon.info dnsmasq-dhcp[2944]: read /etc/ethers - 0 addresses Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: read /etc/hosts - 4 addresses Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: read /tmp/hosts/odhcpd - 1 addresses Tue Jul 31 19:46:31 2018 daemon.info dnsmasq[2944]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses Tue Jul 31 19:46:31 2018 daemon.info dnsmasq-dhcp[2944]: read /etc/ethers - 0 addresses Tue Jul 31 19:46:32 2018 daemon.notice netifd: Interface 'wan6' is now up Tue Jul 31 19:46:32 2018 daemon.info dnsmasq[2944]: reading /tmp/resolv.conf.auto Tue Jul 31 19:46:32 2018 daemon.info dnsmasq[2944]: using local addresses only for domain test Tue Jul 31 19:46:32 2018 daemon.info dnsmasq[2944]: using local addresses only for domain onion Tue Jul 31 19:46:32 2018 daemon.info dnsmasq[2944]: using local addresses only for domain localhost Tue Jul 31 19:46:32 2018 daemon.info dnsmasq[2944]: using local addresses only for domain local Tue Jul 31 19:46:32 2018 daemon.info dnsmasq[2944]: using local addresses only for domain invalid Tue Jul 31 19:46:32 2018 daemon.info dnsmasq[2944]: using local addresses only for domain bind Tue Jul 31 19:46:32 2018 daemon.info dnsmasq[2944]: using local addresses only for domain lan Tue Jul 31 19:46:32 2018 daemon.info dnsmasq[2944]: using nameserver 62.241.198.246#53 Tue Jul 31 19:46:32 2018 daemon.info dnsmasq[2944]: using nameserver 62.241.198.245#53 Tue Jul 31 19:46:32 2018 daemon.info dnsmasq[2944]: using nameserver 2001:14b8:1000::1#53 Tue Jul 31 19:46:32 2018 daemon.info dnsmasq[2944]: using nameserver 2001:14b8:1000::2#53 Tue Jul 31 19:46:32 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led USB 1 Tue Jul 31 19:46:32 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led USB 2 Tue Jul 31 19:46:32 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led WAN Tue Jul 31 19:46:32 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led eSATA Tue Jul 31 19:46:32 2018 daemon.notice procd: /etc/rc.d/S96led: Skipping trigger 'ide-disk' for led 'eSATA' due to missing kernel module Tue Jul 31 19:46:32 2018 user.notice firewall: Reloading firewall due to ifup of wan6 (eth0.2) Tue Jul 31 19:46:33 2018 daemon.info procd: - init complete - Tue Jul 31 19:46:33 2018 daemon.warn odhcpd[1510]: A default route is present but there is no public prefix on br-lan thus we don't announce a default route! Tue Jul 31 19:46:33 2018 daemon.info urandom_seed[3439]: Seed saved (/etc/urandom.seed) Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[2944]: exiting on receipt of SIGTERM Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: started, version 2.80test3 cachesize 1000 Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: DNS service limited to local subnets Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile Tue Jul 31 19:46:33 2018 daemon.info dnsmasq-dhcp[3471]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: using local addresses only for domain test Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: using local addresses only for domain onion Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: using local addresses only for domain localhost Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: using local addresses only for domain local Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: using local addresses only for domain invalid Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: using local addresses only for domain bind Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: using local addresses only for domain lan Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: reading /tmp/resolv.conf.auto Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: using local addresses only for domain test Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: using local addresses only for domain onion Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: using local addresses only for domain localhost Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: using local addresses only for domain local Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: using local addresses only for domain invalid Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: using local addresses only for domain bind Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: using local addresses only for domain lan Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: using nameserver 62.241.198.246#53 Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: using nameserver 62.241.198.245#53 Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: using nameserver 2001:14b8:1000::1#53 Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: using nameserver 2001:14b8:1000::2#53 Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: read /etc/hosts - 4 addresses Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: read /tmp/hosts/odhcpd - 1 addresses Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses Tue Jul 31 19:46:33 2018 daemon.info dnsmasq-dhcp[3471]: read /etc/ethers - 0 addresses Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: read /etc/hosts - 4 addresses Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: read /tmp/hosts/odhcpd - 1 addresses Tue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses Tue Jul 31 19:46:33 2018 daemon.info dnsmasq-dhcp[3471]: read /etc/ethers - 0 addresses TTue Jul 31 19:46:33 2018 daemon.info dnsmasq[3471]: exiting on receipt of SIGTERM Tue Jul 31 19:46:33 2018 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses! Tue Jul 31 19:46:33 2018 user.notice dnsmasq: Allowing 127.0.0.0/8 responses Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: started, version 2.80test3 cachesize 1000 Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: DNS service limited to local subnets Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile Tue Jul 31 19:46:36 2018 daemon.info dnsmasq-dhcp[3769]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: using local addresses only for domain test Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: using local addresses only for domain onion Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: using local addresses only for domain localhost Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: using local addresses only for domain local Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: using local addresses only for domain invalid Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: using local addresses only for domain bind Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: using local addresses only for domain lan Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: reading /tmp/resolv.conf.auto Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: using local addresses only for domain test Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: using local addresses only for domain onion Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: using local addresses only for domain localhost Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: using local addresses only for domain local Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: using local addresses only for domain invalid Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: using local addresses only for domain bind Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: using local addresses only for domain lan Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: using nameserver 62.241.198.246#53 Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: using nameserver 62.241.198.245#53 Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: using nameserver 2001:14b8:1000::1#53 Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: using nameserver 2001:14b8:1000::2#53 Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: read /etc/hosts - 4 addresses Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: read /tmp/hosts/odhcpd - 2 addresses Tue Jul 31 19:46:36 2018 daemon.info dnsmasq[3769]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses Tue Jul 31 19:46:36 2018 daemon.info dnsmasq-dhcp[3769]: read /etc/ethers - 0 addresses


Notes

Tags

toh/netgear/r7800.txt · Last modified: 2018/08/02 18:43 by hnyman