User Tools

Site Tools


toh:netgear:netgear_wn3000rp_v1

NETGEAR WN3000RP v1

Universal WiFi Range Extender

Under Construction!
This page is currently under construction. You can edit the article to help completing it.

This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version (18.06 or later) onto it! See 4/32 warning for details.

1) This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation.
This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now.

2) OpenWrt support for this device will end after 2019.
19.07 will be the last official build for 4/32 devices. After 19.07, no further OpenWrt images will be built for 4/32 devices. See OpenWrt on 4/32 devices what you can do now.

Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when chosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See Broadcom WiFi for details.

Tiny wall plug sized router integrated onto a AC power plug with 1 ethernet port and 2 flexible non-removable external antenna's. Currently its support is very limited as in no 2,4GHz WiFi and it requires “custom” selfbuild “very small” LEDE/OpenWrt images since all the “official” prebuild LEDE/OpenWrt images are to “big” and will brick the device!

FIXME Any text with a light background (like this one) provides instructions for creating the Details Page. When you have filled in correct/useful information (instead of any template that's there) remove the instructions, as well as the <WRAP> that encloses it.

Generic Router

FIXME

Getting started with a new Device Page

  1. This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that you have to fill it with life and information.
  2. There are several “fixme” tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness.
  3. When there are no more “fixme” tags left, delete this one too, along with the <WRAP> that encloses it.

Keep the articles modular

  • Please include only model specific information, omit bla,bla and put everything generic into separate articles
  • If you have no time to write certain stuff, link to docs
  • base-system should lead the way, do not explain this again
  • DO NOT provide a complete howto here! Instead groom the general documentation.

UnSupported Versions

Hardware Highlights

Bricking Installation

Flash Layout

FIXME Find out flash layout, then add the flash layout table here (copy, paste, modify the example).

Please check out the article Flash layout. It contains examples and explanations that describe how to document the flash layout.

OEM easy installation

FIXME The instructions below are for Broadcom devices and only serve as an example.
Remove / modify them if they do not apply to this particular device!

This section deals with

  • How you install OpenWrt from a device freshly opened
  • The steps required such as reset to factory defaults if the device has already been configured

Note: Reset router to factory defaults if it has been previously configured.

  • Browse to http://192.168.1.1/Upgrade.asp
  • Upload .bin file to router
  • Wait for it to reboot
  • Telnet to 192.168.1.1 and set a root password, or browse to http://192.168.1.1 if LuCI is installed.

OEM installation using the TFTP method

Specific values needed for tftp

FIXME Enter values for “FILL-IN” below

Bootloader tftp server IPv4 address FILL-IN
Bootloader MAC address (special) FILL-IN
Firmware tftp image Latest OpenWrt release (NOTE: Name must contain “tftp”)
TFTP transfer window FILL-IN seconds
TFTP window start approximately FILL-IN seconds after power on
TFTP client required IP address FILL-IN

Upgrading OpenWrt

generic.sysupgrade

FIXME These are generic instructions. Update with your router's specifics.

LuCI Web Upgrade Process

  • Browse to http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/ LuCI Upgrade URL
  • Upload image file for sysupgrade to LuCI
  • Wait for reboot

Terminal Upgrade Process

If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line. There are two command line methods for upgrading:

  • sysupgrade
  • mtd

Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.

sysupgrade

  • Login as root via SSH on 192.168.1.1, then enter the following commands:
cd /tmp
wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
sysupgrade /tmp/xxx.abc

mtd

If sysupgrade does not support this router, use mtd.

  • Login as root via SSH on 192.168.1.1, then enter the following commands:
cd /tmp
wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
mtd write /tmp/xxx.abc linux && reboot

Debricking

Failsafe mode

Basic configuration

Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.

Specific Configuration

FIXME Please fill in real values for this device, then remove the EXAMPLEs

Network interfaces

The default network configuration is:

Interface Name Description Default configuration
br-lan EXAMPLE LAN & WiFi EXAMPLE 192.168.1.1/24
vlan0 (eth0.0) EXAMPLE LAN ports (1 to 4) EXAMPLE None
vlan1 (eth0.1) EXAMPLE WAN port EXAMPLE DHCP
wl0 EXAMPLE WiFi EXAMPLE Disabled

Switch Ports (for VLANs)

FIXME Please fill in real values for this device, then remove the EXAMPLEs

Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on.

Port Switch port
Internet (WAN) EXAMPLE 4
LAN 1 EXAMPLE 3
LAN 2 EXAMPLE 2
LAN 3 EXAMPLE 1
LAN 4 EXAMPLE 0

Buttons

hardware.button on howto use and configure the hardware button(s). Here, we merely name the buttons, so we can use them in the above Howto.

FIXME Please fill in real values for this device, then remove the EXAMPLEs

The NETGEAR WN3000RP has the following buttons:

BUTTON Event
EXAMPLE Reset reset
EXAMPLE Secure Easy Setup ses
EXAMPLE No buttons at all. -

Hardware

Info

General
Brand Netgear
Model WN3000RP
Versions v1
Device Type Range Extender
Availability Discontinued
Comments - general
OpenWrt Support
Supported Since Commit https://git.lede-project.org/?p=source.git;a=commit;h=ba0b904d0bb3699e9729d4ce55cd85fc2f689ae8
Supported Since Release 17.01.0
Supported Current Release 19.07.2
Unsupported
Hardware
Instruction set
Sub Instruction Set
Bootloader ¿
Target brcm47xx
System-On-Chip
CPU MHz 300
Flash MB 4
RAM MB 32
Network
Ethernet 100M ports 1
Ethernet Gbit ports -
Switch BCM5325
Modem -
VLAN ¿
Comments - network ports
Wireless
WLAN 2.4GHz b/g/n
WLAN 5.0GHz -
WLAN Hardware Broadcom BCM4329
Detachable Antennas -
Comments - WLAN
Interfaces
USB ports -
SATA ports -
Serial Yes
JTAG ¿
Comments - USB & SATA ports
Misc
LED count ¿
Button count ¿
Power supply 100-240 VAC, 50-60 Hz, 0.3 A
Links
Forum Topic URL http://forum.openwrt.org/t/netgear-wn3000rp-v1-low-cost-repeater-failsafe/1310
WikiDevi URL https://wikidevi.wi-cat.ru/Netgear_WN3000RPv1
OEM device homepage URL https://www.netgear.com/support/product/wn3000rp
Firmware OEM Stock URL https://www.netgear.com/support/product/wn3000rp
Firmware OpenWrt Install URL
Firmware OpenWrt Upgrade URL http://downloads.openwrt.org/releases/19.07.2/targets/brcm47xx/mips74k/openwrt-19.07.2-brcm47xx-mips74k-netgear-wn3000rp-squashfs.chk
Edit the underlying data View/Edit data

Photos

Front:
Insert photo of front of the casing

Back:
Insert photo of back of the casing

Backside label:
Insert photo of backside label

Opening the case

Note: This will void your warranty!

FIXME Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, …

  • To remove the cover and open the device, do a/b/c

Main PCB:
Insert photo of PCB

Serial

port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:
Insert photo of PCB with markings for serial port

FIXME Replace EXAMPLE by real values.

Serial connection parameters
for NETGEAR WN3000RP v1
EXAMPLE 115200, 8N1

JTAG

port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port

Bootloader mods

Hardware mods

None so far.

Bootlogs

OEM bootlog

COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE


OpenWrt bootlog

COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING


Telnet Stock Firmware

The stock firmware has a telnet deamon that gets enabled by sending a magic packet, see unlock netgeartelnet console for more info. Example console output of multiple commands:

./telnetenable 192.168.1.250 AABBCCDDEE11 Gearguy Geardog
telnet 192.168.1.250
Trying 192.168.1.250...
Connected to 192.168.1.250.
Escape character is '^]'.

BusyBox v0.60.0 (2011.03.31-19:56+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.

# cat /proc/mtd 
dev:    size   erasesize  name
mtd0: 00040000 00010000 "boot"
mtd1: 002f0000 00010000 "linux"
mtd2: 002658bc 00010000 "rootfs"
mtd3: 00010000 00010000 "ML1"
mtd4: 00010000 00010000 "ML2"
mtd5: 00010000 00010000 "ML3"
mtd6: 00010000 00010000 "ML4"
mtd7: 00010000 00010000 "ML5"
mtd8: 00010000 00010000 "ML6"
mtd9: 00010000 00010000 "ML7"
mtd10: 00010000 00010000 "ML8"
mtd11: 00010000 00010000 "T_Meter1"
mtd12: 00010000 00010000 "T_Meter2"
mtd13: 00010000 00010000 "POT"
mtd14: 00010000 00010000 "board_data"
mtd15: 00010000 00010000 "nvram"

# cat /dev/mtd/1 > /tmp/mtd1.img
# cat /dev/mtd/2 > /tmp/mtd2.img
# ls -la /tmp/mtd*
-rw-r--r--    1 0        0         2513084 Dec 27 16:34 /tmp/mtd2.img
-rw-r--r--    1 0        0         3080192 Dec 27 16:34 /tmp/mtd1.img

# echo $0
/bin/sh

# version
Release version : Netgear Wireless Router WN3000RP
                  U12H16300/V1.0.0.12/1.0.12
           Time : Apr  1 2011 03:58:44
    CFE version : v1.0.3

# cat /proc/version 
Linux version 2.4.20 (michael@dev3) (gcc version 3.2.3 with Broadcom modifications) #24 Fri Apr 1 03:56:18 CST 2011

# cat /proc/cpuinfo 
system type             : Broadcom BCM5357 chip rev 2
processor               : 0
cpu model               :  V4.9
BogoMIPS                : 149.50
wait instruction        : no
microsecond timers      : yes
tlb_entries             : 64
extra interrupt vector  : no
hardware watchpoint     : yes
VCED exceptions         : not available
VCEI exceptions         : not available
unaligned_instructions  : 2866
System clocks
        (cpu/mem/si/xtal)       : 300/150/75/20 Mhz.
dcache hits             : 2147483648
dcache misses           : 1258289922
icache hits             : 2147483648
icache misses           : 2136506359
instructions            : 2147483648

# cat /proc/devices 
Character devices:
  1 mem
  2 pty/m%d
  3 pty/s%d
  4 tts/%d
  5 cua/%d
 10 misc
 90 mtd
100 acos_nat_cli
123 aglog
162 raw
252 wps_led
253 nvram
254 gpio

Block devices:
 31 mtdblock

# cat /proc/modules 
module:  MultiSsidControl    c0298000      816   0 (unused)
module:  br_dns_hijack       c0294000     9824   0 (unused)
module:  br_dhcp_filter      c0292000     1104   0 (unused)
module:  acos_nat            c01bc000   428768   0 (unused)
module:  wl                  c001d000  1694304   0 (unused)
module:  et                  c000f000    52768   0 (unused)
module:  igs                 c000a000    15616   0 [wl]
module:  emf                 c0004000    20112   0 [wl igs]
module:  ctf                 c0000000     9616   0 (unused)

# cat /proc/mtd 
dev:    size   erasesize  name
mtd0: 00040000 00010000 "boot"
mtd1: 002f0000 00010000 "linux"
mtd2: 002658bc 00010000 "rootfs"
mtd3: 00010000 00010000 "ML1"
mtd4: 00010000 00010000 "ML2"
mtd5: 00010000 00010000 "ML3"
mtd6: 00010000 00010000 "ML4"
mtd7: 00010000 00010000 "ML5"
mtd8: 00010000 00010000 "ML6"
mtd9: 00010000 00010000 "ML7"
mtd10: 00010000 00010000 "ML8"
mtd11: 00010000 00010000 "T_Meter1"
mtd12: 00010000 00010000 "T_Meter2"
mtd13: 00010000 00010000 "POT"
mtd14: 00010000 00010000 "board_data"
mtd15: 00010000 00010000 "nvram"

# cat /proc/self/mounts 
rootfs / rootfs rw 0 0
/dev/root / squashfs ro 0 0
none /dev devfs rw 0 0
proc /proc proc rw 0 0
ramfs /tmp ramfs rw 0 0

# cat /proc/kmsg 
<4>CPU ProcId is: 0x00019749, options: 0x000021cd
<4>Primary instruction cache 32kb, linesize 32 bytes (4 ways)
<4>Primary data cache 32kb, linesize 32 bytes (4 ways)
<4>Linux version 2.4.20 (michael@dev3) (gcc version 3.2.3 with Broadcom modifications) #24 Fri Apr 1 03:56:18 CST 2011
<4>Found a 4MB ST compatible serial flash
<4>Determined physical RAM map:
<4> memory: 02000000 @ 00000000 (usable)
<4>On node 0 totalpages: 8192
<4>zone(0): 8192 pages.
<4>zone(1): 0 pages.
<4>zone(2): 0 pages.
<4>Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
<4>CPU: BCM5357 rev 2 at 300 MHz
<4>Calibrating delay loop... 149.50 BogoMIPS
<6>Memory: 30588k/32768k available (1337k kernel code, 2180k reserved, 104k data, 60k init, 0k highmem)
<6>Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
<6>Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<4>Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
<4>Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
<4>Checking for 'wait' instruction...  unavailable.
<4>POSIX conformance testing by UNIFIX
<4>PCI: no core
<4>PCI: Fixing up bus 0
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<6>devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
<6>devfs: boot_options: 0x1
<6>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
<6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
<6>ttyS00 at 0xb8000300 (irq = 8) is a 16550A
<6>SCSI subsystem driver Revision: 1.00
<3>pflash: found no supported devices
<5>sflash: squash filesystem with lzma found at block 809
<5>Creating 16 MTD partitions on "sflash":
<5>0x00000000-0x00040000 : "boot"
<5>0x00040000-0x00330000 : "linux"
<5>0x000ca744-0x00330000 : "rootfs"
<5>0x00330000-0x00340000 : "ML1"
<5>0x00340000-0x00350000 : "ML2"
<5>0x00350000-0x00360000 : "ML3"
<5>0x00360000-0x00370000 : "ML4"
<5>0x00370000-0x00380000 : "ML5"
<5>0x00380000-0x00390000 : "ML6"
<5>0x00390000-0x003a0000 : "ML7"
<5>0x003a0000-0x003b0000 : "ML8"
<5>0x003b0000-0x003c0000 : "T_Meter1"
<5>0x003c0000-0x003d0000 : "T_Meter2"
<5>0x003d0000-0x003e0000 : "POT"
<5>0x003e0000-0x003f0000 : "board_data"
<5>0x003f0000-0x00400000 : "nvram"
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 512 buckets, 4Kbytes
<6>TCP: Hash tables configured (established 2048 bind 4096)
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<6>NET4: Ethernet Bridge 008 for NET4.0
<1>802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
<1>All bugs added by David S. Miller <davem@redhat.com>
<4>VFS: Mounted root (squashfs filesystem) readonly.
<6>Mounted devfs on /dev
<6>Freeing unused kernel memory: 60k freed
<4>val8: 0
<4>eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.130.15 @VERSION_TYPE@
<4>eth1: Broadcom BCM4329 802.11 Wireless Controller 5.60.130.16 @VERSION_TYPE@
<4>Algorithmics/MIPS FPU Emulator v1.5
<6>vlan1: dev_set_allmulti(master, 1)
<6>vlan1: dev_set_promiscuity(master, 1)
<6>device eth0 entered promiscuous mode
<6>device vlan1 entered promiscuous mode
<6>device eth1 entered promiscuous mode
<6>device wl0.1 entered promiscuous mode
<6>br0: port 3(wl0.1) entering learning state
<6>br0: port 2(eth1) entering learning state
<6>br0: port 1(vlan1) entering learning state
<6>br0: port 3(wl0.1) entering forwarding state
<6>br0: topology change detected, propagating
<6>br0: port 2(eth1) entering forwarding state
<6>br0: topology change detected, propagating
<6>br0: port 1(vlan1) entering forwarding state
<6>br0: topology change detected, propagating
<0>NF_BR_LOCAL_OUT registered.
<4>dev=81eac400 eth1, acos_flags = 00000100
<4>dev=81eacc00 vlan1, acos_flags = 00000080
<4>dev=819a0000 wl0.1, acos_flags = 00000080
<0>IOCTL_AG_REGION_SET: English
<6>device br0 entered promiscuous mode

# cat /proc/pci 
PCI devices found:
  Bus  0, device   0, function  0:
    Class 0501: PCI device 14e4:0800 (rev 2).
      IRQ 8.
      Non-prefetchable 32 bit memory at 0x18000000 [0x18000fff].
      Non-prefetchable 32 bit memory at 0x0 [0xfff].
  Bus  0, device   1, function  0:
    Class 0280: PCI device 14e4:4329 (rev 2).
      IRQ 3.
      Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff].
      Non-prefetchable 32 bit memory at 0x0 [0xfff].
  Bus  0, device   2, function  0:
    Class 0200: PCI device 14e4:4715 (rev 2).
      IRQ 4.
      Non-prefetchable 32 bit memory at 0x18002000 [0x18002fff].
      Non-prefetchable 32 bit memory at 0x0 [0xfff].
  Bus  0, device   4, function  0:
    Class 0c03: PCI device 14e4:471a (rev 2).
      IRQ 5.
      Non-prefetchable 32 bit memory at 0x18009000 [0x18009fff].
  Bus  0, device   4, function  1:
    Class 0c03: PCI device 14e4:471a (rev 2).
      IRQ 5.
      Non-prefetchable 32 bit memory at 0x18004000 [0x18004fff].
  Bus  0, device   5, function  0:
    Class 0500: PCI device 14e4:082e (rev 2).
      IRQ 13.
      Non-prefetchable 32 bit memory at 0x18005000 [0x18005fff].
      Non-prefetchable 32 bit memory at 0x0 [0xfff].
  Bus  0, device   6, function  0:
    Class 0401: PCI device 14e4:4711 (rev 2).
      IRQ 14.
      Non-prefetchable 32 bit memory at 0x18006000 [0x18006fff].
      Non-prefetchable 32 bit memory at 0x0 [0xfff].
  Bus  0, device   7, function  0:
    Class 0500: PCI device 14e4:080e (rev 2).
      IRQ 8.
      Non-prefetchable 32 bit memory at 0x18007000 [0x18007fff].
      Non-prefetchable 32 bit memory at 0x0 [0xfff].

# free
              total         used         free       shared      buffers
  Mem:        30648        18340        12308            0         1940
 Swap:            0            0            0
Total:        30648        18340        12308

# df -h
Filesystem                Size      Used Available Use% Mounted on
rootfs                    2.0M      2.0M         0 100% /
/dev/root                 2.0M      2.0M         0 100% /

# lsmod
Module                  Size  Used by
MultiSsidControl         816   0 (unused)
br_dns_hijack           9824   0 (unused)
br_dhcp_filter          1104   0 (unused)
acos_nat              428768   0 (unused)
wl                   1694304   0 (unused)
et                     52768   0 (unused)
igs                    15616   0 [wl] 
emf                    20112   0 [wl igs] 
ctf                     9616   0 (unused)

# ifconfig -a
br0       Link encap:Ethernet  HWaddr AA:BB:CC:DD:EE:11  
          inet addr:192.168.1.226  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING PROMISC ALLMULTI MULTICAST  MTU:1500  Metric:1
          RX packets:6939 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6050 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:494090 (482.5 kb)  TX bytes:584915 (571.2 kb)

eth0      Link encap:Ethernet  HWaddr AA:BB:CC:DD:EE:11  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1488 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1201 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:163852 (160.0 kb)  TX bytes:271756 (265.3 kb)
          Interrupt:4 Base address:0x2000 

eth1      Link encap:Ethernet  HWaddr AA:BB:CC:DD:EE:11  
          UP BROADCAST RUNNING ALLMULTI MULTICAST  MTU:1500  Metric:1
          RX packets:5759 errors:0 dropped:0 overruns:0 frame:7596
          TX packets:5803 errors:108 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:555850 (542.8 kb)  TX bytes:579280 (565.7 kb)
          Interrupt:3 Base address:0x1000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING MULTICAST  MTU:16436  Metric:1
          RX packets:306 errors:0 dropped:0 overruns:0 frame:0
          TX packets:306 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:64105 (62.6 kb)  TX bytes:64105 (62.6 kb)

vlan1     Link encap:Ethernet  HWaddr AA:BB:CC:DD:EE:11  
          UP BROADCAST RUNNING ALLMULTI MULTICAST  MTU:1500  Metric:1
          RX packets:1193 errors:0 dropped:0 overruns:0 frame:0
          TX packets:893 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:84800 (82.8 kb)  TX bytes:159469 (155.7 kb)

vlan2     Link encap:Ethernet  HWaddr AA:BB:CC:DD:EE:11  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

wl0.1     Link encap:Ethernet  HWaddr AA:BB:CC:DD:EE:11  
          UP BROADCAST RUNNING ALLMULTI MULTICAST  MTU:1500  Metric:1
          RX packets:5759 errors:0 dropped:0 overruns:0 frame:7596
          TX packets:5803 errors:108 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:555850 (542.8 kb)  TX bytes:579280 (565.7 kb)

wl0.2     Link encap:Ethernet  HWaddr 02:BB:CC:DD:EE:11  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5759 errors:0 dropped:0 overruns:0 frame:7596
          TX packets:5803 errors:108 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:555850 (542.8 kb)  TX bytes:579280 (565.7 kb)

wl0.3     Link encap:Ethernet  HWaddr CC:DD:EE:FF:AA:BB  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5759 errors:0 dropped:0 overruns:0 frame:7596
          TX packets:5803 errors:108 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:555850 (542.8 kb)  TX bytes:579280 (565.7 kb)
  
# ls /bin
zcat         rm           mount        gzip         df
wps_monitor  pwd          mknod        gunzip       cp
umount       ps           mkdir        grep         chmod
sh           ping         ls           echo         cat
rmdir        msh          kill         eapd         busybox

# ls /sbin
write                  preinit                erase
version                ntpclient              burnsn
uptime                 lsmod                  burnsku
routerinfo             ledup                  burnrf
rmmod                  leddown                burnpin
restart_all_processes  insmod                 burnethermac
resolve_domain         init                   burnboardid
reset_no_reboot        ifconfig               bd
reboot                 hotplug                acos_service
read_bd                gpio                   acos_init
rc                     getchksum

# ls /usr/bin/
wget     tftp     telnetd  tail     route    killall  free     find

# ls /usr/sbin/
wpsd           upnpnat        telnetenabled  lld2d          et
wlconf         upnp           swresetd       lcli           epi_ttcp
wlanconfigd    udhcpd         pot            igs            emf
wl             udhcpc         outputimage    httpd          brctl
wanled         timesync       nvram          heartbeat      acl_logd
vconfig        testUtility    nas            ftpc

# ls /lib/modules/2.4.20/kernel/drivers/net/
wl
igs
et
emf
ctf

# routerinfo  
Release version : Netgear Wireless Router WN3000RP
                  U12H16300/V1.0.0.12/1.0.12
           Time : Apr  1 2011 03:58:44
    CFE version : v1.0.3
WSC PIN - 12345678
LAN mac address - AABBCCDDEE11
WAN mac address - AABBCCDDEE12
WLAN mac address - AABBCCDDEE11
Board ID - U12H163T01_NETGEAR
serial number - 1XY1234Z12A34

# brctl show
bridge name     bridge id               STP enabled
br0             8000.AABBCCDDEE11       no

# brctl show br0
bridge name     bridge id               STP enabled
br0             8000.AABBCCDDEE11       no

# dmesg 
[    0.000000] Linux version 4.4.182 (buildbot@builds-02.infra.lede-project.org) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3104-41de9a2) ) #0 Tue Jun 18 18:45:43 2019
[    0.000000] CPU0 revision is: 00019749 (MIPS 74Kc)
[    0.000000] bcm47xx: Using bcma bus
[    0.000000] bcma: bus0: Found chip with id 0x5357, rev 0x02 and package 0x08
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 8035a4a0, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  noinitrd console=ttyS0,115200
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 28396K/32768K available (3018K kernel code, 139K rwdata, 372K rodata, 172K init, 286K bss, 4372K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:128
[    0.000000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x26, class 0x0)
[    0.000000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1C, class 0x0)
[    0.000000] bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x03, class 0x0)
[    0.000000] bcma: bus0: Core 3 found: MIPS 74K (manuf 0x4A7, id 0x82C, rev 0x04, class 0x0)
[    0.000000] bcma: bus0: Core 4 found: USB 2.0 Host (manuf 0x4BF, id 0x819, rev 0x05, class 0x0)
[    0.000000] bcma: bus0: Core 5 found: DDR1/DDR2 Memory Controller (manuf 0x4BF, id 0x82E, rev 0x02, class 0x0)
[    0.000000] bcma: bus0: Core 6 found: I2S (manuf 0x4BF, id 0x834, rev 0x02, class 0x0)
[    0.000000] bcma: bus0: Core 7 found: Internal Memory (manuf 0x4BF, id 0x80E, rev 0x0B, class 0x0)
[    0.000000] bcma: bus0: Found rev 9 PMU (capabilities 0x28A42A09)
[    0.000000] bcma: bus0: Found serial flash
[    0.000000] bcma: bus0: Found M25P32 serial flash (size: 4096KiB, blocksize: 0x10000, blocks: 64)
[    0.000000] bcma: bus0: Early bus registered
[    0.000000] MIPS: machine is Unknown Board
[    0.000000] bcm47xx: Setting up vectored interrupts
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 12741736309 ns
[    0.000022] sched_clock: 32 bits at 150MHz, resolution 6ns, wraps every 14316557820ns
[    0.000107] Calibrating delay loop... 149.91 BogoMIPS (lpj=749568)
[    0.070087] pid_max: default: 32768 minimum: 301
[    0.070424] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070466] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.075989] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.076057] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.077738] NET: Registered protocol family 16
[    0.106537] clocksource: Switched to clocksource MIPS
[    0.109396] NET: Registered protocol family 2
[    0.111717] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.111796] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.111855] TCP: Hash tables configured (established 1024 bind 1024)
[    0.112080] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.112152] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.112783] NET: Registered protocol family 1
[    0.112906] PCI: CLS 0 bytes, default 32
[    0.294326] can not parse nvram name sb/1/ag3(null) with value 0xff got -34
[    0.333213] can not parse nvram name sb/1/rxpo2g(null) with value 0xff got -34
[    0.493517] bcma: bus0: Using SPROM revision 8 provided by platform.
[    0.493564] bcma: bus0: PMU resource config unknown or not needed for device 0x5357
[    0.495591] bcma: bus0: Workarounds unknown or not needed for device 0x5357
[    0.495618] bcma: bus0: Initializing MIPS core...
[    0.495657] bcma: bus0: set_irq: core 0x0812, irq 3 => 3
[    0.495689] bcma: bus0: set_irq: core 0x082d, irq 4 => 4
[    0.495722] bcma: bus0: set_irq: core 0x0819, irq 5 => 5
[    0.495752] bcma: bus0: set_irq: core 0x0800, irq 2 => 2
[    0.495784] bcma: bus0: set_irq: core 0x0834, irq 2 => 2
[    0.495805] bcma: bus0: IRQ reconfiguration done
[    0.495828] bcma: core 0x0800, irq : 2(S)* 3  4  5  6  D  I 
[    0.495899] bcma: core 0x0812, irq : 2(S)  3* 4  5  6  D  I 
[    0.495961] bcma: core 0x082d, irq : 2(S)  3  4* 5  6  D  I 
[    0.496020] bcma: core 0x082c, irq : 2(S)  3  4  5  6  D  I*
[    0.496081] bcma: core 0x0819, irq : 2(S)  3  4  5* 6  D  I 
[    0.496143] bcma: core 0x082e, irq : 2(S)  3  4  5  6  D* I 
[    0.496202] bcma: core 0x0834, irq : 2(S)* 3  4  5  6  D  I 
[    0.496261] bcma: core 0x080e, irq : 2(S)  3  4  5  6  D  I*
[    0.498449] bcma: bus0: Bus registered
[    0.499809] Crashlog allocated RAM at address 0x1f00000
[    0.543707] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.543750] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.550506] io scheduler noop registered
[    0.550551] io scheduler deadline registered (default)
[    0.551069] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.558258] console [ttyS0] disabled
[    0.578603] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 2, base_baud = 1250000) is a U6_16550A
[    1.015485] console [ttyS0] enabled
[    1.034093] 7 bcm47xxpart partitions found on MTD device bcm47xxsflash
[    1.040822] Creating 7 MTD partitions on "bcm47xxsflash":
[    1.046341] 0x000000000000-0x000000040000 : "boot"
[    1.057235] 0x000000040000-0x0000003d0000 : "firmware"
[    1.066729] 0x0000003d0000-0x0000003f0000 : "POT"
[    1.075614] 0x0000003f0000-0x000000400000 : "nvram"
[    1.084858] 0x00000004001c-0x000000040924 : "loader"
[    1.094239] 0x000000040924-0x000000168c00 : "linux"
[    1.103478] 0x000000168c00-0x0000003d0000 : "rootfs"
[    1.112811] mtd: device 6 (rootfs) set to be root filesystem
[    1.118792] 1 squashfs-split partitions found on MTD device rootfs
[    1.125111] 0x000000370000-0x0000003d0000 : "rootfs_data"
[    1.139698] libphy: Fixed MDIO Bus: probed
[    1.144169] bgmac_bcma bcma0:2: Found PHY addr: 30 (NOREGS)
[    1.154722] libphy: bcma_mdio mii bus: probed
[    1.159313] bgmac_bcma bcma0:2: Support for Roboswitch not implemented
[    1.278455] b53_common: found switch: BCM5325, rev 4
[    1.285331] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
[    1.291958] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds)
[    1.302772] NET: Registered protocol family 10
[    1.315213] NET: Registered protocol family 17
[    1.320038] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.332950] 8021q: 802.1Q VLAN Support v1.8
[    1.350334] VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
[    1.359175] Freeing unused kernel memory: 172K
[    3.877682] init: Console is alive
[    3.881685] init: - watchdog -
[    5.277417] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    5.449794] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    5.468124] init: - preinit -
[    8.420939] random: jshn: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
[    8.681485] random: jshn: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
[    8.837154] random: jshn: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[    9.101866] random: procd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[    9.125299] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.131611] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
[   10.866719] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   10.873898] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[   12.763147] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[   12.779475] urandom-seed: Seed file not found (/etc/urandom.seed)
[   13.044810] procd: - early -
[   13.048158] procd: - watchdog -
[   13.864502] procd: - watchdog -
[   13.868709] procd: - ubus -
[   14.043863] random: ubusd: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
[   14.067077] random: ubusd: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
[   14.077402] random: ubusd: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
[   14.086770] random: ubusd: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
[   14.097027] random: ubusd: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
[   14.106261] random: ubusd: uninitialized urandom read (4 bytes read, 22 bits of entropy available)
[   14.117631] procd: - init -
[   15.585465] kmodloader: loading kernel modules from /etc/modules.d/*
[   15.601209] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   15.632040] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
[   15.640304] Backport generated by backports.git backports-20160324-13-g24da7d3c
[   15.653141] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.676682] nf_conntrack version 0.5.0 (446 buckets, 1784 max)
[   15.753347] xt_time: kernel timezone is -0000
[   15.899842] b43-phy0: Broadcom 5357 WLAN found (core revision 28)
[   15.907361] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 9
[   15.913595] b43-phy0 ERROR: FOUND UNSUPPORTED RADIO (Manuf 0x17F, ID 0x2057, Revision 5, Version 2)
[   15.922966] b43: probe of bcma0:1 failed with error -122
[   15.928749] Broadcom 43xx driver loaded [ Features: NL ]
[   15.939137] kmodloader: done loading kernel modules from /etc/modules.d/*
[   31.028578] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[   31.035605] jffs2_build_filesystem(): unlocking the mtd device... done.
[   31.042485] jffs2_build_filesystem(): erasing all blocks after the end marker... 
[   35.640701] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   35.668673] device eth0.1 entered promiscuous mode
[   35.673586] device eth0 entered promiscuous mode
[   35.699911] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   35.789700] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[   37.176839] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   37.206915] br-lan: port 1(eth0.1) entered forwarding state
[   37.212733] br-lan: port 1(eth0.1) entered forwarding state
[   37.218796] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[   37.336710] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   39.445650] br-lan: port 1(eth0.1) entered forwarding state
[   40.810918] done.
[   40.812980] jffs2: notice: (797) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   71.361830] random: nonblocking pool is initialized

# nvram show
wla_temp_wep_length_2=
sb/1/ofdm2gpo=0x44442222
wan2_dns=
wlan_acl_dev24=
wl_radius_port=1812
wlan_acl_dev25=
gui_check_enable=1
wan_unit=0
wlan_acl_dev26=
wla_ssid_2=somessid_EXT
wl0_wmf_bss_enable=0
antswctl2g=0x1
wlan_acl_dev27=
wla_ssid_3=
wl0.2_ap_isolate=0
wl0_rifs_advert=auto
wl0_mcast_regen_bss_enable=1
wan_route=
wlan_acl_dev28=
wla_temp_ssid=
wla_ssid_4=
wl0_frameburst=on
pppoe2_keepalive=0
wlan_acl_dev29=
wla_region=5
wl_txstreams=0
bs_trustedip=192.168.1.0
wla_wmm_advert_2=1
wl_rxchain_pwrsave_pps=10
bs_keywords=
potValue=281
wla_repeater=0
auto_enable=0
log_ipaddr=
wla_wmm_advert_3=1
bs_enable=0
sel_region=0
boardrev=0x1106
wan2_gateway=0.0.0.0
wla_wmm_advert_4=1
br0_ifnames=vlan1 eth1 wl0.1
wl0.2_macmode=disabled
wl_nctrlsb=upper
sb/1/mcs2gpo0=0x6666
wl_version=5.60.130.15 @VERSION_TYPE@
wl0.3_bss_enabled=0
wl0_leddc=0x640000
et0macaddr=AA:BB:CC:DD:EE:11
sb/1/mcs2gpo1=0x6666
wla_temp_key1=
ddns_enable=0
sb/1/mcs2gpo2=0x6666
wla_temp_key2=
wla_temp_passphrase=
wiz_dhcp_wait_time=5
sb/1/mcs2gpo3=0x6666
pppoe2_east_username=guest@flets
pppoe2_bs_keyword=
wla_temp_key3=
traffic_enable=0
wl0_radarthrs=0 0x6a8 0x6c8 0x6ac 0x6c7
sb/1/mcs2gpo4=0x8888
wla_temp_key4=
wl_maxassoc=128
wl0_akm=psk2
sb/1/mcs2gpo5=0x8888
watchdog=3000
boot_wait=off
wl0.2_mode=ap
mtd8_lang_name=Russian
wla_temp_key4_2=
sb/1/mcs2gpo6=0x8888
wla_sec_profile_enable_2=1
wl_phytypes=
wl_leddc=0x640000
wps_modelname=WN3000RP
pptp_idletime=5
sb/1/temps_period=5
wl0_infra=1
sb/1/mcs2gpo7=0x8888
wla_sec_profile_enable_3=0
traffic_restart_hour=00
pppoe_localnetmask=...
sb/1/rssismc2g=0xf
et0mdcport=0
fw_disable=0
pppoe_tmp_mtu=1454
wla_sec_profile_enable_4=0
wl0_country_code=GB
gpio_wps_triggered=0
pppoe_keepalive=1
wps_aplockdown_ageout=300
emf_rtport_entry=
wps_config_command=0
ddns_wildcard=0
wla_wds_ptp_mac=
wl_infra=1
rip_multicast=1
reset_gpio=31
run_test=0
single_firmware_en=1
wl0_bcn_rotate=1
pmon_ver=CFE 5.60.69 
sb/1/rssisav2g=0x7
wlan_acl_dev30=
wl_stbc_tx=auto
first_wan_status=0
wlan_acl_dev31=
restore_defaults=0
sb/1/bxa2g=0x3
vlan2ports=4 5
wps_success_mode=0
wlan_acl_dev32=
wl0.3_bcn=100
wl0.1_hwaddr=AA:BB:CC:DD:EE:11
wlan_acl_dev33=
wlan_acl_dev34=
wl0_wme_sta_be=15 1023 3 0 0 off off
wan_lease=43200 
wlan_acl_dev35=
wla_temp_sec_profile_enable_2=
str_tbl_non_en_tag=
wl0_nctrlsb=lower
wl0_version=5.60.130.15 @VERSION_TYPE@
sb/1/triso2g=0x5
wlan_acl_dev36=
wla_temp_sec_profile_enable_3=
wl_wme_apsd=on
str_tbl_non_en_ver=0.0.0.0
sb/1/sromrev=8
http_wanport=
wlan_acl_dev37=
wla_temp_sec_profile_enable_4=
wl_radius_ipaddr=
ddns_hostname=
bs_trustedip_temp=192.168.1.0
wl0.2_dtim=2
wl0.2_ssid=
wl0_psr_mrpt=0
lan_gateway=0.0.0.0
wan2_netmask=0.0.0.0
wlan_acl_dev38=
wl0_ifname=eth1
wlan_acl_dev39=
wla_key3_2=
upnp_DHCPServerConfigurable=1
qos_rule_count=-1
lan_domain=
pppoe2_bs_enable=0
wla_key3_3=
wl0_wme_sta_bk=15 1023 7 0 0 off off
timer_interval=3600
wla_key3_4=
mtd4_lang_version=1.0.0.12_2.1.9.1
wl0_rxchain_pwrsave_quiet_time=1800
lan1_ipaddr=192.168.2.1
wl_net_reauth=36000
pptp_username=
wl_same_sec=1
wl0_rxstreams=0
pppoe_mtu=1492
wla_temp_enable=enable_ap
wl_radio_pwrsave_on_time=50
upnp_advert_period=30
second_wan_status=0
gpio7=wps_led
lan_route=
wl0.1_wps_mode=enabled
wl0_mrate=0
schedule_daylightadjust=0
wps_device_pin=57829364
fw_email_email_enable=0
wan_gateway=192.168.1.1
wla_secu_type=WPA2-PSK
wps_lan_led=0
wl0_mode=psr
wl0.1_bcn=100
sb/1/pa2gw2a0=0xFB33
wan2_dns1=
dhcp_start=192.168.1.100
wl0.2_wps_mode=enabled
wl0_stbc_tx=auto
sb/1/pa2gw2a1=0xFB57
wan_hwaddr_sel=0
wl0.3_wme_bss_disable=0
lan1_route=
pppoe2_bs_keywords=
sku_name=WW
wl0_ap_isolate=0
wl0_rxchain_pwrsave_pps=10
wl_msglevel=0x101
ntp_update_interval=86400
dhcp_end=192.168.1.200
wl_mrate=0
traffic_warning_state=0
connect_status=0
wl0.3_wps_mode=enabled
sb/1/tempthresh=120
sb/1/itt2ga0=0x20
wla_temp_ssid_2=
wl_wmf_bss_enable=0
wl_akm=psk2
wfi_error=
wl0_wme_no_ack=off
wl0_ampdu=auto
wl0_gmode=1
sb/1/itt2ga1=0x20
wla_temp_ssid_3=
qos_l7_apps=5:3 6:3 3:0 2:0 4:0 1:0
wla_allow_access_2=1
wla_temp_ssid_4=
wla_temp_region=5
wla_allow_access_3=0
wla_wds_enable=0
boardtype=0x054d
pppoe2_mtu=1454
pppoe2_demand=0
wla_allow_access_4=0
pptp_passwd=
is_default=1
wla_autochannel=enable
wl_wme_bss_disable=0
wl_ampdu_rr_rtylimit_tid=3 3 3 3 3 3 3 3
wl_obss_coex=0
wl0.1_wme_bss_disable=0
wl0_nband=2
et1macaddr=AA:BB:CC:DD:EE:12
ctf_disable=0
wl_gmode=1
wl_ampdu=auto
wps_uuid=0x06ce49c1aff4a5f939429364964d2f7f
wps_perm_lock=0
wps_start=none
stats_server=
wlan_acl_dev40=
traffic_cntime_monthly_limit=
et_swleds=0x3ff
static_route=
wlan_acl_dev41=
wla_auth_type=automatic
mtd3_lang_name=
wl0_nreqd=0
wlan_acl_dev42=
bs_enable_temp=0
ver_check_ftp_password=WNR2200@
lan_netmask=255.255.255.0
wlan_acl_dev43=
ver_check_enable=0
mtd9_lang_version=
wl0.1_crypto=aes
wl0_wme_txp_be=7 3 4 2 0
lan1_ifname=
wlan_acl_dev44=
wl_nband=2
lan1_hwnames=
pppoe2_west_passwd=flets
wlan_acl_dev45=
http_username=admin
wl_wme_sta_vi=7 15 2 6016 3008 off off
wl0_ssid=somessid
wl0_dtim=2
wan_ipaddr_old=0.0.0.0
wlan_acl_dev46=
super_passwd=Geardog
wla_ap_isolate=0
wps_pbc_apsta_concurrent=enabled
wlan_acl_dev47=
wl_nreqd=0
wl_wme_ap_be=15 63 3 0 0 off off
wl0_dfs_preism=60
os_date=Apr  1 2011
pppoe_tmp_servicename=
wlan_acl_dev48=
http_rmenable=1
pptp_serv_ip=10.0.0.138
rftest=Michael, rf_ok.ch_4.co_of.new_pa, 2010/07/16
sb/1/regrev=63
boardpwrctl=0xc00
wlan_acl_dev49=
wl0_wme_txp_bk=7 3 4 2 0
sb/1/ag0=0x2
http_lanport=80
sb/1/ag1=0x2
wl_plcphdr=long
wl_wme_sta_vo=3 7 2 3264 1504 off off
sb/1/ag2=0x2
lan1_wins=
wl_macmode=disabled
wl_mimo_preamble=mm
wan_hwaddr2=AA:BB:CC:DD:EE:12
rc_wait_seconds=0
sb/1/ag3=0xff
wan_hwname=
wan_domain=lan
wlan_acl_dev0=
wl_wme_ap_bk=15 1023 7 0 0 off off
wl0_key1=
lan_lease=60
wan_netmask=255.255.255.0
wlan_acl_dev1=
wl_phytype=n
wl0_vlan_prio_mode=off
wl0_key2=
wlan_acl_dev2=
wl_lazywds=0
wl0_key3=
cur_opmode=130Mbps
wlan_acl_dev3=
wl_dfs_postism=60
wl0_key4=
wlan_acl_dev4=
wlan_acl_mac0=
wl_mcast_regen_bss_enable=1
traffic_restart_min=00
wl0.1_maclist=
sb/1/rssismf2g=0xf
wlan_acl_dev5=
wlan_acl_mac1=
wla_temp_broadcast=ssid_bc
need_set_lang=0
wl0.3_macmode=disabled
lan1_lease=86400
pppoe2_bs_keywords_temp=
wlan_acl_dev6=
wlan_acl_mac2=
wlan_acl_dev7=
wlan_acl_mac3=
wla_auth_type_2=automatic
wl_auth_mode=none
pptp_conn_id=
inbound_record=
wl0_vifs=wl0.1
wlan_acl_dev8=
wlan_acl_mac4=
wla_auth_type_3=automatic
wlan_acl_dev9=
wlan_acl_mac5=
wla_auth_type_4=automatic
vlan2hwname=et0
pppoe2_flag_Smin=0
wlan_acl_mac6=
wlan_acl_mac7=
wl0_hw_rxchain=3
wl0_rxchain_pwrsave_enable=1
wlan_acl_mac8=
http_passwd=password
wl_wpa_psk=somepassw
http_rmstartip=0.0.0.0
bpa_passwd=
sb/1/extpagain2g=0x2
wlan_acl_mac9=
wla_temp_key3_2=
lan_stp=1
mtd3_lang_version=
mtd6_lang_name=French
wl0_wme_ap_vi=7 15 1 6016 3008 off off
wl0.2_unit=0.2
wl0.3_akm=
wl0_bss_maxassoc=128
pppoe_acname=
wl_mode=psr
pppoe_tmp_idletime=300
wan_dns1=
lang_check_ftp_svr=updates1.netgear.com
wlan_acl_dev50=
wlan_acl_mac10=
static_pptp_enable=0
wl0_tpc_db=0
wl0_rate=0
wlan_acl_dev51=
wlan_acl_mac11=
wl0_closed=0
wl0_plcphdr=long
xtalfreq=20000
wlan_acl_dev52=
wlan_acl_mac12=
wla_temp_setting=0
wl_wpa_gtk_rekey=0
wl0_macmode=disabled
wl0_wme_ap_vo=3 7 1 3264 1504 off off
wl0_radioids=BCM2057
sb/1/stbcpo=0x0
wlan_acl_dev53=
wlan_acl_mac13=
wl0_phytype=n
pppoe_tmp_localip=0.0.0.0
wlan_acl_dev54=
wlan_acl_mac14=
wl_wme_txp_vi=7 3 4 2 0
wlanrestart_now=0
wl0_lazywds=0
wan2_ipaddr=0.0.0.0
wlan_acl_dev55=
wlan_acl_mac15=
wlan_acl_dev56=
wlan_acl_mac16=
fw_email_email_alert=0
wlan_acl_dev57=
wlan_acl_mac17=
lang_check_config_file_name=stringtable.txt
wps_proc_status=0
boardflags2=0x1001000
pppoe2_tmp1=
wlan_acl_dev58=
wlan_acl_mac18=
sb/1/bwduppo=0x0
sb/1/aa2g=0x3
pppoe2_fw_bks_block_type=0
pppoe2_tmp2=
wlan_acl_dev59=
wlan_acl_mac19=
wl0_afterburner=off
sb/1/txchain=0x3
pppoe2_tmp3=
wl_wme_txp_vo=7 3 4 2 0
wl0_antdiv=-1
lan_hwaddr=AA:BB:CC:DD:EE:11
wl_wds_timeout=1
wps_aplockdown_duration=300
fwpt_count=0
nat_inbound_filtering=1
wan_dns=192.168.1.1 
pppoe_flet_type=0
wl_wps_mode=enr_enabled
fw_spi_enab=1
board_id=U12H163T01_NETGEAR
wps_success_mode_2=0
wla_preamble=long
wla_key2_2=
pptp_dod=1
lang_check_config_file_dir=stringtables
wl0.1_akm=psk2 
wl0.3_ap_isolate=0
cfe_version=v1.0.3
wl_ssid=somessid
wla_key2_3=
wl_dtim=2
wla_temp_defaKey_2=
wl0.1_ifname=wl0.1
wl0_wpa_psk=somepassw
wla_key2_4=
wl_radarthrs=0 0x6a8 0x6c8 0x6ac 0x6c7
lan_wps_oob=disabled
supported_languages=English French Italian German Russian
wait_time=3
bpa_idletime=5
schedule_config=127:0:0:23:59
boradflags=0x710
wla_wme=1
bpa_server_temp=
potMaxValue=4320
wl0_amsdu=auto
dhcp_mode=manual
wl0.2_wep=disabled
mtd8_lang_version=1.0.0.12_2.1.9.1
wl0.2_auth=0
pppoe_tmp_username=guest
dhcp_wins=
os_server=
mtd9_lang_name=
wla_mode=300Mbps
wan_bpa_minheartbeat=2
wan_proto=dhcp
wl_key1=
wl_amsdu=auto
lan_wps_reg=enabled
bs_keyword=
ver_check_config_file=fileinfo.txt
str_tbl_en_ver=1.0.0.12_2.1.9.2
sb/1/pa2gw1a0=0x1424
wla_defaKey=0
wl_key2=
wl0_unit=0
sb/1/pa2gw1a1=0x14BF
wla_temp_defaKey=
wl_key3=
wl_country_code=GB
wl_key4=
all_service_tbl=
tftp_serv_ipaddr=192.168.1.2
dhcp_serv_ip=192.168.1.1 
wl_hwaddr=
pppoe2_flag_Emin=0
wl_rxchain=3
ParentalCtrl_MAC_ID_tbl=
wl0_net_reauth=36000
wl0_bss_enabled=1
str_tbl_en=1
wl_vifs=wl0.1
sb/1/boardflags2=0x1000
wlan_acl_dev60=
wlan_acl_mac20=
wl_vlan_prio_mode=off
lan1_stp=1
wlan_acl_dev61=
wlan_acl_mac21=
wps_timeout_enable=0
wl0_nmode=-1
wlan_acl_dev62=
wlan_acl_mac22=
wlan_acl_dev63=
wlan_acl_mac23=
wl_rifs_advert=auto
pppoe_switch=1
wlan_acl_mac24=
sku_lang=English
wps_restart=0
wlan_acl_mac25=
bpa_dod=1
traffic_volume_ctrl_dir=0
wlan_acl_mac26=
wl_nmode=-1
wla_wds_pmp_sta=1
lan1_gateway=192.168.2.1
wlan_acl_mac27=
fw_bks_block_type=0
wlan_acl_mac28=
bpa_username=
wlan_acl_mac29=
wla_ssid=somessid
wl_rxstreams=0
wl_wps_reg=enabled
upnp_portmap_entry=0
ap_mode=1
wl0_wds=
wl_rate=0
gui_region=English
wfi_cmd=
load_defaults=
log_level=0
telnetd_enable=0
wl0_reg_mode=off
ntp_server=192.5.41.40 192.5.41.41 133.100.9.2
pptp_user_netmask=...
wan_hwaddr=AA:BB:CC:DD:EE:12
wps_mfstring=NETGEAR, Inc.
lan_ifnames=vlan1 eth1  wl0.1
lan_dns=0.0.0.0
pppoe_ifname=ppp0
pppoe2_filter_rule_tbl=
wl0_radius_port=1812
wla_key1=
wl0_auth=2
wl0_wme=on
pppoe_policy_num=0
wla_key2=
wla_secu_type_2=WPA2-PSK
wl_rxchain_pwrsave_quiet_time=1800
wl0.3_mode=ap
wl0_radius_ipaddr=
wl0_wme_bss_disable=0
wl0_rxchain=3
wla_key3=
wla_secu_type_3=None
traffic_restart_ampm=0
wla_key4=
wla_temp_ssid_bc_2=
wla_secu_type_4=None
wl_radio_pwrsave_pps=10
wl0_wme_sta_vi=7 15 2 6016 3008 off off
ure_disable=1
wlan_acl_num=64
wla_temp_ssid_bc_3=
wl_country=SG
traffic_control_type=0
wl0.2_maclist=
wan2_dns_sel=0
wla_temp_ssid_bc_4=
sb/1/boardflags=0x710
ver_check_ftp_svr1=updates1.netgear.com
ver_check_ftp_svr2=updates1.netgear.com
sb/1/leddc=0xffff
ver_check_ftp_svr3=updates1.netgear.com
wan_ifnames=vlan2 
wl0_wme_sta_vo=3 7 2 3264 1504 off off
pppoe_wan_dns1=
wl_rateset=12
wl_crypto=aes
http_timeout=5
wla_channel=11
pppoe2_temp_type=4
wla_temp_channel=0
wl0_wps_reg=enabled
pppoe_max_echo_fail=3
pppoe2_east_passwd=guest
wlan_acl_mac30=
link_status=1
wla_temp_key2_2=
wlan_acl_mac31=
pptp_user_ip=...
bypass_board_id=1
wl0.1_mode=ap
rootap_linkrate=130
lan_ipaddr=192.168.1.250
clkfreq=300,150,75
os_name=linux
lan_proto=dhcp
dhcp_resrv_mac=
wlan_acl_mac32=
wla_defaKey_2=0
wl_radius_key=
mtd4_lang_name=English
wl0_maxassoc=128
vlan1hwname=et0
wl_psr_mrpt=0
lan1_netmask=255.255.255.0
wlan_acl_mac33=
wla_passphrase_2=somepassw
wla_defaKey_3=0
wl_rxchain_pwrsave_enable=1
ver_type=WW
wl0_radio_pwrsave_on_time=50
pppoe2_servicename=
wlan_acl_mac34=
wla_passphrase_3=
wla_defaKey_4=0
mtd7_lang_version=1.0.0.12_2.1.9.1
wlan_acl_mac35=
wla_passphrase_4=
wl_unit=0
wl0.3_dtim=2
wl0.3_ssid=
wl0_phytypes=n
wlan_acl_mac36=
ddns_last_ip=0.0.0.0
qos_port=
router_disable=0
lan1_proto=dhcp
wlan_acl_mac37=
wl_nmode_protection=auto
wps_sta_pin=00000000
wan_bpa_maxheartbeat=20
wl0_wep=
wl0_frag=2346
wlan_acl_mac38=
wla_rts=2347
ddns_username=
wl0.1_closed=0
pppoe_passwd=
wlan_acl_mac39=
wl_radio_pwrsave_enable=0
http_rmport=80
ddns_passwd=
wl0.1_ap_isolate=0
ver_check_ftp_username=anonymous
ParentalControl=0
wl0_rifs=
sdram_config=0x202
wl0_country=SG
logo_enable=1
vlan1ports=0 1 2 3 5*
pppoe2_idletime=300
dmz_ipaddr=192.168.1.0
sb/1/temps_hysteresis=5
wl_wds=
bpa_status=0
traffic_round_up_volume=0
wl0.2_bcn=100
dhcp_resrv_ip=
wps_aplockdown_count=30
ccode=0
wl0_ampdu_rr_rtylimit_tid=3 3 3 3 3 3 3 3
wl0_rateset=12
pppoe_servicename=
pppoe2_acname=
wl0.1_ssid=somessid_EXT
wl0.1_dtim=2
wla_key1_2=
wl0_ure= 
wl0_wme_apsd=on
sb/1/macaddr=AA:BB:CC:DD:EE:11
wla_key1_3=
wl0_wme_txp_vi=7 3 4 2 0
sb/1/ccode=US
pppoe2_west_username=flets@flets
wla_key1_4=
mtd10_lang_name=
wl0_txstreams=0
pppoe_idletime=300
wl_wme=on
wiz_pppoe_wait_time=5
system_name=WN3000RP
rip_enable=0
wl0.1_radio=1
lan_ifname=br0
wan_primary=0
wl_wme_ap_vi=7 15 1 6016 3008 off off
wl0_mimo_preamble=mm
boardflags=0x710
fw_rsp_ping=0
browser_language= English
sdram_refresh=0x8040
wandevs=vlan2
wl0_same_sec=1
wl0_wme_txp_vo=7 3 4 2 0
sb/1/cck2gpo=0x0
dhcp_domain=
wla_wep_length=0
ddns_checked=0
wl0.1_bss_maxassoc=128
wl_auth=2
fwpt_enable=1
mtd7_lang_name=Italian
wps_proc_mac=
sdram_ncdl=0x00000000
wan_dns_sel=0
wl0.2_wme_bss_disable=0
sb/1/pa2gw0a0=0xFF1D
lan1_domain=
wl_wme_ap_vo=3 7 1 3264 1504 off off
sb/1/pa2gw0a1=0xFF60
wlan_acl_mac40=
fw_sip_enab=1
ezc_enable=1
pppoe_session_id=0
wlan_acl_mac41=
wl_frameburst=on
wl_bss_maxassoc=128
wl0_nmode_protection=auto
wl0_radio_pwrsave_pps=10
wlan_acl_mac42=
traffic_restart_day=1
pppoe2_schedule_enable=0
wlan_acl_mac43=
pppoe_echo_interval=30
pppoe2_username=guest
wlan_acl_mac44=
qos_enable=0
is_modified=0
wan_ipaddr=192.168.1.226
wan2_ipaddr_old=0.0.0.0
wlan_acl_mac45=
wla_wlanstate=Enable
upnp_duration=3600
first_brs_lang=English
wl0_msglevel=0x101
wlan_acl_mac46=
macaddr=AA:BB:CC:DD:EE:11
wlan_acl_mac47=
wla_ssid_bc_2=1
pppoe_flet_sel=fletdisable
wlan_acl_mac48=
wla_temp_secu_type_2=
wla_ssid_bc_3=1
fw_email_email_addr=
wl0_rts=2347
wlan_acl_mac49=
wla_temp_secu_type_3=
wla_ssid_bc_4=1
blk_srv_tbl=
sb/1/bw40po=0x0
sb/1/devid=0x4329
lan1_dhcp=0
wan_wins=
wla_temp_secu_type_4=
wl_ifname=
wl_wep=
wl_nbw_cap=1
wl_ampdu_rtylimit_tid=7 7 7 7 7 7 7 7
ipv6_enable=0
wl0_hw_txchain=3
rootap_assoc=1
os_version=5.70.58.6
pppoe_username=guest
potInterval=60
qos_bw_min_0=
wl_gmode_protection=auto
wsc_pin_disable=0
qos_bw_min_1=
wl0_wpa_gtk_rekey=0
lan1_wps_oob=enabled
qos_bw_min_2=
wl0_sta_retry_time=5
upnp_advert_ttl=4
wla_wds_pmp_mac=
qos_bw_min_3=1000000
qos_bw_set_sel=1
wl_frag=2346
fw_dmz_enab=0
pf_services_tbl=
traffic_watermark=0
wl0_key=1
pppoe2_schedule_config=127:0:0:23:59
wl_preauth=
wan_bpa_localport=5050
wan_mtu=1500
wl0.1_macmode=disabled
run_wiz=0
regrev=0
wl_maclist=
wps_addER=0
emf_entry=
friendly_name=WN3000RP
mtd6_lang_version=1.0.0.12_2.1.9.1
gpio15=wps_button
wla_passphrase=somepassw
wl_rifs=
et0phyaddr=30
console_loglevel=1
pppoe_server_mac=
static_pppoe_enable=0
wla_temp_passphrase_2=
time_zone=0
wl_bcn_rotate=1
lan1_wps_reg=enabled
wps_aplockdown_cap=1
bpa_server=login-server
rip_version=2
traffic_block_enable=0
wl_ure= 
wla_wep_length_2=0
wl_wps_config_state=1
acs_ifnames=eth1 eth1 eth1 eth1
pppoe2_session_id=0
wla_wep_length_3=0
qos_bw_max_0=128000
brs_lang_check_enable=1
wla_wep_length_4=0
wla_wds_ptp_sta=1
qos_bw_max_1=
wl0.3_maclist=
wl0.3_unit=0.3
wan_ifname=br0
upnp_turn_on=1
qos_bw_max_2=
pppoe2_all_service_tbl=
wl_wme_sta_be=15 1023 3 0 0 off off
qos_bw_max_3=
sb/1/pdetrange2g=0x2
wl_radioids=
inbound_policy_tbl=
wl0_dfs_postism=60
landevs=vlan1 wl0
wan_hostname=
wl0_radio=1
pppoe_tmp_passwd=
pppoe2_authtype=0
wlan_acl_mac50=
wl_corerev=
wl_nmcsidx=-1
wlan_acl_mac51=
wl0_nbw_cap=1
wl0.1_wpa_psk=somepassw
pppoe_dod=1
wlan_acl_mac52=
wl_channel=11
traffic_led_enable=0
wlan_acl_mac53=
wps_mode=enabled
wl_wme_sta_bk=15 1023 7 0 0 off off
wl0_bcn=100
wps_currentband=
wlan_acl_mac54=
fw_email_email_smtp=
wl0_hwaddr=AA:BB:CC:DD:EE:11
wlan_acl_mac55=
wl_radio=1
wl_afterburner=off
fw_email_pid=-1
enable_gui_str_tbl=1
cur_access_user_ip=192.168.1.228
wla_temp_key1_2=
wlan_acl_mac56=
wl0_ampdu_rtylimit_tid=7 7 7 7 7 7 7 7
pppoe2_ifname=ppp1
wlan_acl_mac57=
wl0_preauth=
sb/1/tssipos2g=0x1
ezc_version=2
wlan_acl_mac58=
emf_enable=0
port_tr_conf=
wl0.1_unit=0.1
wl0_gmode_protection=auto
wlan_acl_dev10=
wlan_acl_mac59=
wlan_acl_dev11=
wl0_maclist=
wl0.2_akm=
bridge_http_hijack=0
wl0_obss_coex=0
wlan_acl_dev12=
wla_frag=2346
wl_radio_pwrsave_quiet_time=1800
sdram_init=0x0419
wlan_acl_dev13=
wl_rts=2347
fw_dmz_ip4=2
wlan_acl_dev14=
wla_key4_2=
traffic_warning_time=0
sb/1/antswctl2g=0x1
lan_wins=
wan_desc=
wlan_acl_dev15=
wla_key4_3=
wl_ap_isolate=0
qos_bw_enable=0
lan_hwnames=
pppoe2_localip=0.0.0.0
wlan_acl_dev16=
wla_key4_4=
wps_modelnum=WN3000RP
fwpt_timeout=1200
lanip_setup_changed=0
wl0.3_wep=disabled
wps_method=1
gpio20=wps_button
lan1_ifnames=
pppoe2_dod=0
pppoe2_server_mac=
wlan_acl_dev17=
wl_txchain=3
rip_filter_enable=0
wlan_acl_dev18=
wl_wme_no_ack=off
bpa_debug_level=1
wlan_acl_dev19=
wl0.3_auth=0
ia_ui_lock=0
wl0_wps_config_state=1
wl0_radius_key=
wl0_wme_ap_be=15 63 3 0 0 off off
wl0_nmcsidx=-1
wl0_corerev=28
sb/1/ledbh23=0x82
pppoe2_blk_srv_tbl=
wl_key=1
pptp_gateway=
pppoe_mru=1492
wl0_channel=11
wl0_wds_timeout=1
sb/1/tri2g=0xff
pppoe_wan_dns_sel=0
wps_device_name=WN3000RP
wps_aplockdown=0
sb/1/maxp2ga0=0x52
traffic_volume_monthly_limit=
wl0.1_bss_enabled=1
wl0_wme_ap_bk=15 1023 7 0 0 off off
sb/1/maxp2ga1=0x52
upnp_enable=1
wl_bss_enabled=1
wla_wds_mode=1
wl0_wps_mode=enr_enabled
wps_config_method=0x84
wl_wme_txp_be=7 3 4 2 0
str_tbl_non_en=0
mtd10_lang_version=
wla_temp_allow_access_2=
sb/1/cddpo=0x0
pppoe_flet_keyword=flets
runtest=0
wla_temp_allow_access_3=
emf_uffp_entry=
rip_dir=1
dhcp_offer_ip=192.168.1.226
sb/1/opo=0x0
pppoe2_passwd=
blank_state=0
wla_temp_allow_access_4=
bs_keywords_temp=
wps_status=0
wl0_radio_pwrsave_quiet_time=1800
lan1_hwaddr=
wlan_acl_mac60=
wla_temp_mode=130Mbps
wl_dfs_preism=60
wl0.1_auth=0
sb/1/rxchain=0x3
wlan_acl_mac61=
wl_sta_retry_time=5
qos_bw_uplink=256000
wl0.1_wep=disabled
wla_temp_wep_length=
wl0_auth_mode=none
wlan_acl_mac62=
wl_closed=0
wl_wme_txp_bk=7 3 4 2 0
wl0_radio_pwrsave_enable=0
wlan_acl_mac63=
wl_tpc_db=0
mtd5_lang_name=German
wps_mixedmode=2
wl0_crypto=aes
sb/1/rxpo2g=0xff
boardnum=01
wlan_acl_enable=0
ver_check_stringtable_dat=stringtable.dat
lanip_wds_setup_changed=0
mtd5_lang_version=1.0.0.12_2.1.9.2
wl0_txchain=3
sb/1/antswitch=0x0
pppoe2_mru=1454
lanip_changed=0
pppoe_localgateway=...
pppoe2_dns_server=
wl_bcn=100
http_rmendip=255.255.255.255
wl_reg_mode=off
wlan_acl_dev20=
super_username=Gearguy
wl0.2_bss_enabled=0
pppoe_localip=0.0.0.0
pppoe2_bs_enable_temp=0
wlan_acl_dev21=
ddns_update_time=0
gui_region2=
wlan_acl_dev22=
sta_list=0
wlan_acl_dev23=
wla_temp_secu_type=
wl_antdiv=-1
size: 18892 bytes (13876 left)

Notes

Space for additional notes, links to forum threads or other resources.

Tags

FIXME Add tags below, then remove this fixme.

How to add tags

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
toh/netgear/netgear_wn3000rp_v1.txt · Last modified: 2020/01/16 15:20 by walterav