User Tools

Site Tools


toh:netgear:mbr1310

Netgear MBR1310

Device Info and Specifics

The MBR1310 utilizes Broadcom architecture brcm47xx.

This is a standard 4+1×10/100 router, with an additional Sierra MC7710 mounted internally into a PCIe slot, with the SIM slot available externally. Two USB ports are also available.

Supported Versions

Version/Model Launchdate Model Specific Notes
v1 N/A N/A

Hardware Highlights

Installation v1

TBD.

Basic Operation

Installation

Support for the different versions of the MBR1310
  • Version 1 of this device is TBD supported in trunk.
    • The precompiled image openwrt-brcm47xx-netgear-mbr1310-squashfs.chk can be uploaded in the original Web interface or via TFTP
    • Now should be the mips74k branch file:

http://downloads.openwrt.org/snapshots/trunk/brcm47xx/mips74k/openwrt-brcm47xx-netgear-mbr1310-squashfs.chk

Wireless support

*FIXME* There are at least 4 different wireless drivers available: b43 , broadcom-wl , brcmsmac and brcmfmac.

  • b43 : 2 wireless radios detected, both radios don't work (no scanning) (as of trunk r37307)
  • broadcom-wl : 1 wireless radio detected, 802.11n works, AP Mode works (as of trunk Feb-2013)
  • brcmsmac: 2 wireless radios detected, both work with N speed, AP Mode on bgn radio[1], 802.11a+n client mode only, P2P status unknown (ad-hoc networking)(as of trunk r37307)
  • brcmfmac: unknown

[1]AP Mode for brcmsmac is WIP ( linux-wireless ), AP mode has errors

Hardware tinkering

The 4 case screws at the bottom are Torx T8.

TBD internal photos

serial console

Serial Headers aren't populated.

[ ] [ ] [ ] [ ]	  {BCM5758}
GND TX  VCC RX

{switch}

Bootlogs

OEM bootlog

Version: V1.1.00.25_1.00.25t_generic

Hardware Version MBR1517

# cat /proc/cmdline
root=/dev/mtdblock0 console=ttyS0,115200 init=/sbin/init

orig. fw telnet /proc/cpuinfo

# cat /proc/cpuinfo
system type             : Broadcom BCM5357 chip rev 2
processor               : 0
cpu model               : MIPS 74K V4.9
BogoMIPS                : 149.91
wait instruction        : no
microsecond timers      : yes
tlb_entries             : 64
extra interrupt vector  : no
hardware watchpoint     : yes
ASEs implemented        : mips16 dsp
VCED exceptions         : not available
VCEI exceptions         : not available

unaligned_instructions  : 64
dcache hits             : 2147483648
dcache misses           : 4227426236
icache hits             : 2147483648
icache misses           : 897054183
instructions            : 2147483648
#

orig. fw telnet /proc/meminfo

# cat /proc/meminfo
MemTotal:        28084 kB
MemFree:          2952 kB
Buffers:          2564 kB
Cached:           9624 kB
SwapCached:          0 kB
Active:           5144 kB
Inactive:         9124 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:        28084 kB
LowFree:          2952 kB
SwapTotal:           0 kB
SwapFree:            0 kB
Dirty:               0 kB
Writeback:           0 kB
AnonPages:        2100 kB
Mapped:           1356 kB
Slab:             6384 kB
SReclaimable:      860 kB
SUnreclaim:       5524 kB
PageTables:        412 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
CommitLimit:     14040 kB
Committed_AS:     5336 kB
VmallocTotal:  1015800 kB
VmallocUsed:      3988 kB
VmallocChunk:  1009372 kB
Boot message including CFE

Decompressing...done CFE version 5.60.101 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: Wed, 14 Dec 2011 17:40:04 +0800 (sunny@localhost) Copyright (C) 2000-2008 Broadcom Corporation. Init Arena Init Devs. Boot partition size = 131072(0x20000) Found a 8MB ST compatible serial flash et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.101 CPU type 0x19749: 300MHz Tot mem: 32768 KBytes CFE mem: 0x80700000 - 0x807DC950 (903504) Data: 0x80738C50 - 0x8073C0D0 (13440) BSS: 0x8073C0D0 - 0x80776950 (239744) Heap: 0x80776950 - 0x807DA950 (409600) Stack: 0x807DA950 - 0x807DC950 (8192) Text: 0x80700000 - 0x80738C4C (232524) ###BT ver: 1.03 ### OFF ALL LED ON POWER LED FLASH: Base 0x0 size 0x800000 type 0x100 flags 0x1 SC:MAC in FLASH:10:0d:7f:2f:85:68 No NMRP Server found wait. press ctrl-c to cancel autostart Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: ...... 3429260 bytes read Entry at 0x80001000 Starting program at 0x80001000 Linux version 2.6.22 (root@localhost.localdomain) (gcc version 4.2.3) #3 Mon Jan 21 12:18:25 CST 2013 CPU revision is: 00019749 Found a 8MB ST compatible serial flash Determined physical RAM map: memory: 02000000 @ 00000000 (usable) Zone PFN ranges: Normal 0 -> 8192 HighMem 8192 -> 8192 early_node_map[1] active PFN ranges 0: 0 -> 8192 Built 1 zonelists. Total pages: 8192 Kernel command line: root=/dev/mtdblock0 console=ttyS0,115200 init=/sbin/init Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, linesize 32 bytes. Synthesized TLB refill handler (20 instructions). Synthesized TLB load handler fastpath (32 instructions). Synthesized TLB store handler fastpath (32 instructions). Synthesized TLB modify handler fastpath (31 instructions). PID hash table entries: 256 (order: 8, 1024 bytes) CPU: BCM5357 rev 2 at 300 MHz Using 150.000 MHz high precision timer. Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 27896k/32768k available (2631k kernel code, 4856k reserved, 544k data, 172k init, 0k highmem) Mount-cache hash table entries: 512 NET: Registered protocol family 16 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: no core PCI: Fixing up bus 0 NET: Registered protocol family 2 Time: MIPS clocksource has been installed. IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher fuse init (API version 7.8) io scheduler noop registered (default) Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A loop: module loaded PPP generic driver version 2.4.2 NET: Registered protocol family 24 usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver net1080 usbcore: registered new interface driver cdc_subset usbcore: registered new interface driver zaurus pflash: found no supported devices sflash: squash filesystem with lzma found at block 1569 Creating 15 MTD partitions on "sflash": 0x001887e0-0x00790000 : "rootfs" 0x00020000-0x00790000 : "fs+kernel" 0x00000000-0x00020000 : "bootloader" 0x007e0000-0x007f0000 : "sc_nvram" 0x007b0000-0x007c0000 : "POT" 0x007c0000-0x007d0000 : "traffic_meter" 0x007d0000-0x007e0000 : "DPF" 0x007f0000-0x00800000 : "nvram" 0x00780000-0x00790000 : "English UI" 0x00770000-0x00780000 : "Chinese UI" 0x00760000-0x00770000 : "Russian UI" 0x00760000-0x00780000 : "Danish UI" 0x00740000-0x00760000 : "Swedish UI" 0x00790000-0x007a0000 : "Other UI" 0x007a0000-0x007b0000 : "tm3g" usbmon: debugfs is not available ehci_hcd 0000:00:04.1: EHCI Host Controller ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:04.1: irq 5, io mem 0x18004000 ehci_hcd 0000:00:04.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd 0000:00:04.0: OHCI Host Controller ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:04.0: irq 5, io mem 0x18009000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected GACT probability NOT on nf_conntrack version 0.5.0 (256 buckets, 2048 max) BCM fast NAT: INIT ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 172k freed Failed to execute /init usb 1-1: new high speed USB device using ehci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected init started: BusyBox v1.00 (2013.01.18-06:47+0000) multi-call binary init started: BusyBox v1.00 (2013.01.18-06:47+0000) multi-call binary Starting pid 151, console /dev/console: '/usr/etc/rcS' Algorithmics/MIPS FPU Emulator v1.5 mount: Mounting ramfs on /home failed: No such file or directory mount: Mounting ramfs on /mnt failed: No such file or directory mkdir: Cannot create directory `/mnt/shares': No suchusb 1-1.3: new high speed USB device using ehci_hcd and address 3 file or directory usb 1-1.3: config 1 has an invalid interface number: 7 but max is 5 usb 1-1.3: config 1 has no interface number 5 usb 1-1.3: configuration #1 chosen from 1 choice led_pb_api: module license 'Sercomm' taints kernel. led_hw: no version for "sc_led_pb_unregister" found: kernel tainted. Register LED ID <40> ...init led WLAN_ENABLE_LED to OUTPUT Register LED ID <70> ...init led PWR_GREEN_LED to OUTPUT call handler Register LED ID <71> ...init led PWR_AMBER_LED to OUTPUT call handler Register LED ID <107> ...init led RESET_USBHUB to OUTPUT call handler ...reset usb hub Register LED ID <106> ...init button SIMCARD_PLUGGED to INPUT Register LED ID <95> ...init led SIGNALLOW3G_AMBER to OUTPUT Register LED ID <96> ...init led SIGNALMED3G_GREEN to OUTPUT Register LED ID <97> ...init led SIGNALHIG3G_BLUE to OUTPUT Register LED ID <98> ...init led RESET3GMODULE to OUTPUT call handler Register LED ID <99> ...init led ANT3GCHOOSE to OUTPUT call handler Register LED ID <100> ...init led INTERNET_GREEN_LED to OUTPUT Register LED ID <101> ...init led INTERNET_AMBER_LED to OUTPUT Register LED ID <102> ...init led MODE2G_GREEN to OUTPUT Register LED ID <103> ...init led MODE3G_BLUE to OUTPUT Register LED ID <104> ...init led USBCONNECTOR_BLUE to OUTPUT Register LED ID <90> ...init button PUSH_BTN to INPUT Register LED ID <91> ...init button WPS_BTN to INPUT Register LED ID <92> ...init button WLAN_DISABLE_BTN to INPUT usb 1-1: USB disconnect, address 2 usb 1-1.3: USB disconnect, address 3 call handler netfilter PSD loaded - (c) astaro AG ipt_random match loaded insmod: cannot open module `/lib/modules/ct_mgr.ko': No such file or directory usb 1-1: new high speed USB device using ehci_hcd and address 4 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected nax_max = 4096 nf_conntrack_rtsp v0.6.21 loading nf_nat_rtsp v0.6.21 loading init common module successful insert firewall block module success fake source dos protect modules is inserted netfilter PSD and TCP/UDP Echo/Chargen Attack loaded netfilter tcp syn flood module loaded netfilter clamp total session for one src ip module loaded netfilter other dos module loaded usb 1-1.3: new high speed USB device using ehci_hcd and address 5 et_probe 317: ctf is et->cih 811d9100 eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.120.24 insmod: cannot open module `/lib/modules/2.6.22/kernel/drivers/net/bcm57xx/bcm57xx.ko': No such file or directory usb 1-1.3: config 1 has an invalid interface number: 7 but max is 5 usb 1-1.3: config 1 has no interface number 5 insmod: cannot insert `/lib/modules/2.6.22/kernel/drivers/net/et/et.ko': Success (17):usb 1-1.3: configuration #1 chosen from 1 choice Success eth1: Broadcom BCM4347 802.11 Wireless Controller 5.60.120.24 init... call handler insmod finish /usr/sbin/rc.sh: 1: /usr/sbin/atmctl: not found /usr/sbin/rc.sh: 2: /usr/sbin/adslctl: not found /usr/sbin/rc.sh: 3: /usr/sbin/adslctl: not found /usr/sbin/rc.sh: 4: /usr/sbin/atmctl: not found eth0.1: dev_set_promiscuity(master, 1) device eth0 entered promiscuous mode device eth0.1 entered promiscuous mode [rc debug]/usr/sbin/rc init [rc.c::rc_init():441] load sms from mtd OK RC: wifi_init() rules = <>, timeout = 20 [rc.c::get_sierra_module():306] module name:MC7710 [rc.c::init_boardid_in_nvram():362] boardid will be MBR1517 ft_tool uses obsolete (PF_INET,SOCK_PACKET) =============rc start [rc debug]/usr/sbin/rc start ap_name=(null) action=start [rc.c::rc_start():649] Calling Start function of lan [SYSTEM]/usr/sbin/bcmnvram unset vlan11ports [SYSTEM]/usr/sbin/bcmnvram unset vlan12ports [SYSTEM]/usr/sbin/bcmnvram unset vlan13ports [SYSTEM]/usr/sbin/bcmnvram unset vlan14ports [SYSTEM]/usr/sbin/bcmnvram set vlan1ports="1 2 3 4 5*" [SYSTEM]/sbin/vconfig rem eth0.1 >/dev/null 2>&1 device eth0.1 left promiscuous mode br0: port 1(eth0.1) entering disabled state [SYSTEM]/sbin/vconfig rem eth0.11 >/dev/null 2>&1 [SYSTEM]/sbin/vconfig rem eth0.12 >/dev/null 2>&1 [SYSTEM]/sbin/vconfig rem eth0.13 >/dev/null 2>&1 [SYSTEM]/sbin/vconfig rem eth0.14 >/dev/null 2>&1 [SYSTEM]/sbin/vconfig add eth0 1 [SYSTEM]/usr/sbin/brctl addif br0 eth0.1 [SYSTEM]/sbin/ifconfig eth0.1 up eth0.1: dev_set_promiscuity(master, 1) [SYSTEM]/usr/sbin/brctl setfd br0 1 [SYSTEM]/sbin/ifconfig br0 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 br0: port 1(eth0.1) entering learning state [SYSTEM]/usr/sbin/brctl stp br0 off [rc.c::rc_start():649] Calling Start function of printk [SYSTEM]/bin/echo 1 4 1 7 > /proc/sys/kernel/printk [rc.c::rc_start():649] Calling Start function of timezone [SYSTEM]/bin/echo GMT+0 > /etc/TZ [rc.c::rc_start():649] Calling Start function of syslogd [SYSTEM]/sbin/syslogd -f /etc/syslog.conf [rc.c::rc_start():649] Calling Start function of httpd [sc_language.c::create_language_file():386] Create link files for <English> [sc_language.c::create_language_file():408] Checking MTD </dev/mtdblock8> according to its id <ENU> [sc_language.c::decompress_language():162] Try to decompress MTD </dev/mtdblock8> [rc debug]/bin/rc firewall restart ap_name=firewall action=restart [SYSTEM]/bin/cp /proc/uptime /var/run/rc.firewall.run [SYSTEM]/bin/cp /proc/uptime /var/run/rc.firewall.run [rc.c::rc_stop():673] Calling Stop function of firewall [SYSTEM]echo 0 > /proc/sys/net/ipv4/ip_forward [rc.c::rc_start():649] Calling Start function of firewall [firewall/fw_cfg.c::start_firewall():87] write firewall rules to /tmp/rules [SYSTEM]/bin/echo switch=on > /proc/net/spi_enable [SYSTEM]/bin/echo clear > /proc/net/firewall_block [SYSTEM]/bin/echo clear > /proc/net/clamp_total_session_for_one_src [SYSTEM]/bin/echo clear > /proc/net/psd_udp_tcp_vanilla_port_scan [SYSTEM]/bin/echo clear > /proc/net/echo_chargen_config [SYSTEM]/bin/echo wan_if=eth0.2 > /proc/net/spi_enable [SYSTEM]/bin/echo spi=enable > /proc/net/spi_enable fw_pt [SYSTEM]/bin/cp /usr/etc/crontab /etc/crontab [firewall/fw_cfg.c::start_firewall():89] run firewall rules in /tmp/rules iptables v1.3.8: host/network `(null)' not found Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.8: host/network `(null)' not found Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.8: host/network `(null)' not found Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.8: host/network `(null)' not found Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.8: host/network `(null)' not found Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.8: host/network `(null)' not found Try `iptables -h' or 'iptables --help' for more information. iptables: Incompatible with this kernel [SYSTEM]/bin/cp /usr/etc/crontab /etc/crontab [SYSTEM]/bin/echo GMT+0 > /etc/TZ [SYSTEM]echo 1 > /proc/net/ipt_condition/schedule sh: cannot create /proc/net/ipt_condition/schedule: Directory nonexistent [SYSTEM]/usr/sbin/mini_httpd -d /www -r "NETGEAR MBR1517" -c '**.cgi' -t 300& [SYSTEM]/usr/sbin/mini_httpd -P 443 -d /www -S -E /etc/mini_httpd.pem -r "NETGEAR MBR1517" -c '**.cgi' -t 300& [rc.c::rc_start():649] Calling Start function of dhcpd killall: udhcpd: no process killed [rc.c::rc_start():649] Calling Start function of ntp [SYSTEM]/usr/sbin/netgear_ntp -z GMT+0& [rc.c::rc_start():649] Calling Start function of route [rc.c::rc_start():649] Calling Start function of ripd [rc.c::rc_start():649] Calling Start function of dnshj start dnshj... [SYSTEM]killall -9 dnrd killall: dnrd: no process killed [SYSTEM]iptables -t nat -I PREROUTING -i br0 -p udp --dport 53 -j DNAT --to 192.168.1.1 [SYSTEM]dnrd -a 192.168.1.1 -m hosts -c off -g routerlogin.com -b Notice: caching turned off Warning: Using /etc/hosts will be removed in a future version. Please use only the /etc/dnrd/master file or use -m off. [SYSTEM]iptables -t nat -I PREROUTING -i br0 -p tcp --dport 80 -j DNAT --to 192.168.1.1:80 [rc.c::rc_start():649] Calling Start function of potcounter [rc.c::rc_start():649] Calling Start function of lltd [rc.c::rc_start():649] Calling Start function of wlan lan_ifnames=eth0 eth1 wl0.1 lan1_ifnames=wl1.1 ========idx=0 [SYSTEM]/sbin/wl -i eth1 wds none [SYSTEM]/sbin/wl -i eth1 down [SYSTEM]/sbin/wl -i eth1 mbss 1 [SYSTEM]/sbin/wl -i eth1 bss -C 0 down [SYSTEM]/sbin/wl -i eth1 bss -C 1 down [SYSTEM]/sbin/wl -i eth1 bss -C 2 down [SYSTEM]/sbin/wl -i eth1 bss -C 3 down Setting SSID: "NETGEAR-3G" Setting SSID: "NETGEAR_Guest1" Setting SSID: "NETGEAR_Guest2" Setting SSID: "NETGEAR_Guest3" [SYSTEM]/sbin/ifconfig eth1 down 2>/dev/null [SYSTEM]/sbin/ifconfig wl0.1 down 2>/dev/null [SYSTEM]/sbin/ifconfig wl0.2 down 2>/dev/null [SYSTEM]/sbin/ifconfig wl0.3 down 2>/dev/null [SYSTEM]/sbin/ifconfig eth1 hw ether 10:0D:7F:2F:85:68 2>/dev/null [SYSTEM]/sbin/wl -i eth1 cur_etheraddr 10:0D:7F:2F:85:68 2>/dev/null [SYSTEM]/sbin/ifconfig wl0.1 hw ether 62:0D:7F:2F:85:69 2>/dev/null [SYSTEM]/sbin/wl -i wl0.1 cur_etheraddr 62:0D:7F:2F:85:69 2>/dev/null [SYSTEM]/sbin/wl -i eth1 ap 1 [SYSTEM]/sbin/wl -i eth1 closed 0 [SYSTEM]/sbin/wl -i eth1 country GB [SYSTEM]/sbin/wl -i eth1 band b [SYSTEM]/sbin/wl -i eth1 regulatory 0 [SYSTEM]/sbin/wl -i eth1 radar 0 2>/dev/null [SYSTEM]/sbin/wl -i eth1 spect 0 2>/dev/null [SYSTEM]/sbin/wl -i eth1 mimo_bw_cap 0 [SYSTEM]/sbin/wl -i eth1 wpa_cap -C 0 > /var/wpa_cap0 [SYSTEM]/sbin/wl -i eth1 wpa_cap -C 0 0 2>/dev/null [SYSTEM]/sbin/wl -i eth1 wpa_cap -C 1 > /var/wpa_cap0 [SYSTEM]/sbin/wl -i eth1 wpa_cap -C 1 0 2>/dev/null [SYSTEM]/sbin/wl -i eth1 wpa_cap -C 2 > /var/wpa_cap0 [SYSTEM]/sbin/wl -i eth1 wpa_cap -C 2 0 2>/dev/null [SYSTEM]/sbin/wl -i eth1 wpa_cap -C 3 > /var/wpa_cap0 [SYSTEM]/sbin/wl -i eth1 wpa_cap -C 3 0 2>/dev/null [SYSTEM]/sbin/wl -i eth1 maxassoc 16 [SYSTEM]/sbin/wl -i eth1 bss_maxassoc 16 [SYSTEM]/sbin/wl -i eth1 nmode -1 [SYSTEM]/sbin/wl -i eth1 ampdu 1 [SYSTEM]/sbin/wl -i eth1 nmode_protection_override -1 [SYSTEM]/sbin/wl -i eth1 protection_control 2 [SYSTEM]/sbin/wl -i eth1 nreqd 0 [SYSTEM]/sbin/wl -i eth1 gmode Auto [SYSTEM]/sbin/wl -i eth1 gmode_protection_override -1 [SYSTEM]/sbin/wl -i eth1 gmode_protection_control 2 [SYSTEM]/sbin/wl -i eth1 protection_control 2 [SYSTEM]/sbin/wl -i eth1 plcphdr long [SYSTEM]/sbin/wl -i eth1 rate 0 [SYSTEM]/sbin/wl -i eth1 bg_rate 0 [SYSTEM]/sbin/wl leddc 0x0 [SYSTEM]/sbin/wl -i eth1 mrate -1 [SYSTEM]/sbin/wl -i eth1 bg_mrate -1 [SYSTEM]/sbin/wl -i eth1 rateset default [SYSTEM]/sbin/wl -i eth1 rtsthresh 2347 [SYSTEM]/sbin/wl -i eth1 fragthresh 2346 [SYSTEM]/sbin/wl -i eth1 dtim 2 [SYSTEM]/sbin/wl -i eth1 bi 100 [SYSTEM]/sbin/wl -i eth1 afterburner_override 0 [SYSTEM]/sbin/wl -i eth1 wme 1 2>/dev/null [SYSTEM]/sbin/wl -i eth1 wme_noack 0 2>/dev/null [SYSTEM]/sbin/wl -i eth1 wme_apsd 1 2>/dev/null [SYSTEM]/sbin/wl -i eth1 wme_bss_disable 0 [SYSTEM]/sbin/wl -i eth1 afterburner_override 0 [SYSTEM]/sbin/wl -i eth1 frameburst 0 [SYSTEM]/sbin/wl -i eth1 ap_isolate 0 [SYSTEM]/sbin/wl -i eth1 wds none [SYSTEM]/sbin/wl -i eth1 pwr_percent 100 [SYSTEM]/sbin/wl -i eth1 mac none [SYSTEM]/sbin/wl -i eth1 macmode 0 [SYSTEM]/sbin/wl -i eth1 lazywds 0 [SYSTEM]/sbin/wl -i eth1 wds [SYSTEM]/sbin/wl -i eth1 up [SYSTEM]/sbin/wl -i eth1 autochannel 1 [SYSTEM]/sbin/wl -i eth1 autochannel 2 [SYSTEM]/sbin/wl -i eth1 csscantimer 0 [SYSTEM]/sbin/wl -i eth1 obss_coex 0 [SYSTEM]/sbin/wl -i eth1 rmwep -C 0 0 [SYSTEM]/sbin/wl -i eth1 rmwep -C 0 1 [SYSTEM]/sbin/wl -i eth1 rmwep -C 0 2 [SYSTEM]/sbin/wl -i eth1 rmwep -C 0 3 [SYSTEM]/sbin/wl -i eth1 rmwep -C 1 0 [SYSTEM]/sbin/wl -i eth1 rmwep -C 1 1 [SYSTEM]/sbin/wl -i eth1 rmwep -C 1 2 [SYSTEM]/sbin/wl -i eth1 rmwep -C 1 3 [SYSTEM]/sbin/wl -i eth1 rmwep -C 2 0 [SYSTEM]/sbin/wl -i eth1 rmwep -C 2 1 [SYSTEM]/sbin/wl -i eth1 rmwep -C 2 2 [SYSTEM]/sbin/wl -i eth1 rmwep -C 2 3 [SYSTEM]/sbin/wl -i eth1 rmwep -C 3 0 [SYSTEM]/sbin/wl -i eth1 rmwep -C 3 1 [SYSTEM]/sbin/wl -i eth1 rmwep -C 3 2 [SYSTEM]/sbin/wl -i eth1 rmwep -C 3 3 [SYSTEM]/sbin/wl -i eth1 wsec -C 0 0 [SYSTEM]/sbin/wl -i eth1 wsec_restrict -C 0 0 [SYSTEM]/sbin/wl -i eth1 wpa_auth -C 0 0 [SYSTEM]/sbin/wl -i eth1 eap 0 [SYSTEM]/sbin/wl -i eth1 auth -C 0 0 [SYSTEM]/sbin/wl -i eth1 bss -C 0 up [SYSTEM]/usr/sbin/brctl addif br0 eth1 [SYSTEM]/sbin/ifconfig eth1 up [SYSTEM]/sbin/ifconfig wl0.1 down [SYSTEM]/sbin/ifconfig wl0.2 down [SYSTEM]/sbin/ifconfig wl0.3 down usage: /usr/sbin/bcmupnp -D Reaped 877 [rc debug]/usr/sbin/rc wps_change start wlmngr_startWsc: ap-pbc mode UPnP daemon is ready to run [rc.c::rc_start():649] Calling Start function of usb_init [usb_new/usb.c::sd_mount():618] Dump SHARES_ALL: [usb_new/usb.c::sd_mount():623] Dump SHARES_NOW: [usb_new/usb.c::sd_mount_disk():561] sd_mount_disk in, cmd:MOUNT, sd:(null) [usb_new/usb.c::sd_mount_disk():603] check if need do whole disk mount/unmout <sd> [usb_new/usb.c::sd_mount():642] Dump SHARES_NOW: [SYSTEM]/usr/bin/killall -9 smbd >/dev/null 2>&1 [SYSTEM]/usr/bin/killall -9 nmbd >/dev/null 2>&1 [SYSTEM]/usr/bin/killall -9 bftpd >/dev/null 2>&1 [SYSTEM]/usr/bin/killall -9 smbd >/dev/null 2>&1 config buf is wps_aplockdown_cap=1 config buf is wps_aplockdown_count=30 config buf is wps_aplockdown_duration=300 config buf is wps_aplockdown_ageout=300 config buf is wps_aplockdown_forceon=0 config buf is wps_device_pin=28560098 config buf is wps_mixedmode=0 config buf is wps_random_ssid_prefix=NTGR config buf is wps_randomssid=NTGR_7y0n7bnfa config buf is wps_randomkey=vxic4i5a config buf is wps_device_name=MBR1517 config buf is wps_mfstring=Netgear config buf is wps_modelname=MBR1517 config buf is wps_modelnum=MBR1517 config buf is boardnum=1234 config buf is wps_config_method=0x84 config buf is wps_version2_num=0x20 config buf is wps_uuid=8b99a06aa5a8dd089292743eca2bd110 config buf is eth1_hwaddr=10:0D:7F:2F:85:68 config buf is eth1_wps_mode=enabled config buf is eth1_mode=ap config buf is eth1_wep=disabled config buf is eth1_auth=0 config buf is eth1_ssid=NETGEAR-3G config buf is eth1_band=2 config buf is eth1_wfi_enable=1 config buf is ess0_wlnames=eth1 config buf is ess0_wps_reg=enabled config buf is ess0_wps_oob=enabled config buf is ess0_led_id=0 config buf is ess0_band=1 config buf is ess0_upnp_instance=0 config buf is ess0_ifname=br0 config buf is ess0_ipaddr=192.168.1.1 config buf is wps_ess_num=1 config num is 35 [SYSTEM]/usr/bin/killall -9 nmbd >/dev/null 2>&1 ### wps_wfi_init(): [SYSTEM]/usr/bin/killall -9 bftpd >/dev/null 2>&1 WFI is enabled ### sh: cannot create /proc/led: Directory nonexistent [SYSTEM]/bin/rm /tmp/usb_ok rm: cannot remove `/tmp/usb_ok': No such file or directory [rc.c::rc_start():649] Calling Start function of debug_mode [rc.c::rc_start():649] Calling Start function of wifi_isolation =============rc finish [rc debug]/usr/sbin/rc upnp start ap_name=upnp action=start [SYSTEM]/bin/cp /proc/uptime /var/run/rc.upnp.run [SYSTEM]/bin/cp /proc/uptime /var/run/rc.upnp.run can't find this application [SYSTEM]/bin/cp /proc/uptime /var/run/rc.upnp.run [rc.c::rc_start():649] Calling Start function of upnp [SYSTEM]route add -net 239.0.0.0 netmask 255.0.0.0 br0 [SYSTEM]/usr/sbin/miniupnpd -i eth0.2 -a 192.168.1.1 -p 56688 -U -t 1800 -T 4 -u 824ff22b-8c7d-41c5-a131-44f534e12555 route: SIOC[ADD|DEL]RT: File exists [rc debug]/usr/sbin/rc schedule restart [SYSTEM]/bin/cp /proc/uptime /var/run/rc.schedule.run [SYSTEM]/bin/cp /proc/uptime /var/run/rc.schedule.run [rc.c::rc_start():649] Calling Start function of schedule [SYSTEM]/bin/cp /usr/etc/crontab /etc/crontab preapre_sys_for_3g [SYSTEM]/bin/echo GMT+0 > /etc/TZ mknod: /dev/zero: File exists [SYSTEM]echo 1 > /proc/net/ipt_condition/schedule mkdir: Cannot create directory `/var': File exists preapre_sys_for_3g done [rc debug]rc choose_wan start ap_name=choose_wan action=start [SYSTEM]/bin/cp /proc/uptime /var/run/rc.choose_wan.run [SYSTEM]/bin/cp /proc/uptime /var/run/rc.choose_wan.run can't find this application [SYSTEM]/bin/cp /proc/uptime /var/run/rc.choose_wan.run [rc.c::rc_start():649] Calling Start function of choose_wan [basic/choose_wan.c::choose_wan_start():50] CHOOSE WAN... [basic/choose_wan.c::choose_wan_start():66] 3G-ONLY [SYSTEM]/bin/killall failover killall: failover: no process killed [SYSTEM]/bin/rc detectrule stop [rc debug]/bin/rc detectrule stop ap_name=detectrule action=stop [SYSTEM]/bin/cp /proc/uptime /var/run/rc.detectrule.run [SYSTEM]/bin/cp /proc/uptime /var/run/rc.detectrule.run can't find this application [SYSTEM]/bin/cp /proc/uptime /var/run/rc.detectrule.run [rc.c::rc_stop():673] Calling Stop function of detectrule [basic/detectrule.c::detectrule_stop():104] DEL detect rules [SYSTEM]/bin/ip route flush table 200 Nothing to flush. [SYSTEM]/bin/ip route add blackhole default table 200 [SYSTEM]/bin/ip rule del table 200 RTNETLINK answers: No such file or directory [SYSTEM]/bin/ip route flush cache [SYSTEM]/bin/rc detectiface stop [rc debug]/bin/rc detectiface stop ap_name=detectiface action=stop [SYSTEM]/bin/cp /proc/uptime /var/run/rc.detectiface.run [SYSTEM]/bin/cp /proc/uptime /var/run/rc.detectiface.run can't find this application [SYSTEM]/bin/cp /proc/uptime /var/run/rc.detectiface.run [rc.c::rc_stop():673] Calling Stop function of detectiface [SYSTEM]/usr/bin/killall pptp killall: pptp: no process killed [SYSTEM]/usr/bin/killall pppd9 killall: pppd9: no process killed [SYSTEM]/usr/bin/killall udhcpc9 killall: udhcpc9: no process killed [SYSTEM]/sbin/ifconfig eth0.2 0.0.0.0 >/dev/null 2>&1 [SYSTEM]/usr/sbin/rc wan stop [rc debug]/usr/sbin/rc wan stop [SYSTEM]/sbin/rc wan_basic stop [rc debug]/sbin/rc wan_basic stop ap_name=wan_basic action=stop [SYSTEM]/bin/cp /proc/uptime /var/run/rc.wan_basic.run [SYSTEM]/bin/cp /proc/uptime /var/run/rc.wan_basic.run [rc.c::rc_stop():673] Calling Stop function of wan_basic [SYSTEM]/usr/bin/killall netgear_ntp [SYSTEM]/usr/bin/killall -SIGUSR2 miniupnpd killall: ripd: no process killed killall: zebra: no process killed [SYSTEM]/usr/sbin/iptables -D PRE_BASIC -t nat -i eth0.2 -d ! (null) -j DROP sh: Syntax error: "(" unexpected [SYSTEM]/bin/echo "#!/bin/sh" > /etc/ppp/ip-down [SYSTEM]/usr/bin/killall pptp killall: pptp: no process killed [SYSTEM]/usr/bin/killall pppd killall: pppd: no process killed [SYSTEM]/usr/bin/killall udhcpc killall: udhcpc: no process killed [SYSTEM]/usr/bin/killall pppoe-relay killall: pppoe-relay: no process killed [SYSTEM]/sbin/ifconfig eth0.2 0.0.0.0 >/dev/null 2>&1 [SYSTEM]/usr/sbin/rc 3g stop [rc debug]/usr/sbin/rc 3g stop ap_name=3g action=stop [SYSTEM]/bin/cp /proc/uptime /var/run/rc.3g.run [SYSTEM]/bin/cp /proc/uptime /var/run/rc.3g.run can't find this application [SYSTEM]/bin/cp /proc/uptime /var/run/rc.3g.run [rc.c::rc_stop():673] Calling Stop function of 3g [SYSTEM]/usr/bin/killall dongle_monitor > /dev/null killall: dongle_monitor: no process killed [SYSTEM]/usr/sbin/rc wan stop > /dev/null [rc debug]/usr/sbin/rc wan stop [SYSTEM]/sbin/rc wan_basic stop [rc debug]/sbin/rc wan_basic stop [SYSTEM]/bin/cp /proc/uptime /var/run/rc.wan_basic.run [SYSTEM]/bin/cp /proc/uptime /var/run/rc.wan_basic.run [rc.c::rc_stop():673] Calling Stop function of wan_basic [SYSTEM]/usr/bin/killall netgear_ntp [SYSTEM]/usr/bin/killall -SIGUSR2 miniupnpd killall: ripd: no process killed killall: zebra: no process killed [SYSTEM]/usr/sbin/iptables -D PRE_BASIC -t nat -i eth0.2 -d ! (null) -j DROP sh: Syntax error: "(" unexpected [SYSTEM]/bin/echo "#!/bin/sh" > /etc/ppp/ip-down [SYSTEM]/usr/bin/killall pptp killall: pptp: no process killed [SYSTEM]/usr/bin/killall pppd killall: pppd: no process killed [SYSTEM]/usr/bin/killall udhcpc killall: udhcpc: no process killed [SYSTEM]/usr/bin/killall pppoe-relay killall: pppoe-relay: no process killed [SYSTEM]/sbin/ifconfig eth0.2 0.0.0.0 >/dev/null 2>&1 [SYSTEM]/usr/bin/killall pppd1 > /dev/null killall: pppd1: no process killed [SYSTEM]/bin/echo > /tmp/failover_3gonly [SYSTEM]/usr/sbin/rc 3g start [rc debug]/usr/sbin/rc 3g start ap_name=3g action=start [SYSTEM]/bin/cp /proc/uptime /var/run/rc.3g.run [SYSTEM]/bin/cp /proc/uptime /var/run/rc.3g.run can't find this application [SYSTEM]/bin/cp /proc/uptime /var/run/rc.3g.run [rc.c::rc_start():649] Calling Start function of 3g [SYSTEM]/usr/bin/killall dongle_monitor > /dev/null killall: dongle_monitor: no process killed [SYSTEM]/usr/sbin/rc wan stop > /dev/null [rc debug]/usr/sbin/rc wan stop [SYSTEM]/sbin/rc wan_basic stop [rc debug]/sbin/rc wan_basic stop [SYSTEM]/bin/cp /proc/uptime /var/run/rc.wan_basic.run [SYSTEM]/bin/cp /proc/uptime /var/run/rc.wan_basic.run [rc.c::rc_stop():673] Calling Stop function of wan_basic [SYSTEM]/usr/bin/killall netgear_ntp [SYSTEM]/usr/bin/killall -SIGUSR2 miniupnpd killall: ripd: no process killed killall: zebra: no process killed [SYSTEM]/usr/sbin/iptables -D PRE_BASIC -t nat -i eth0.2 -d ! (null) -j DROP sh: Syntax error: "(" unexpected [SYSTEM]/bin/echo "#!/bin/sh" > /etc/ppp/ip-down [SYSTEM]/usr/bin/killall pptp killall: pptp: no process killed [SYSTEM]/usr/bin/killall pppd killall: pppd: no process killed [SYSTEM]/usr/bin/killall udhcpc killall: udhcpc: no process killed [SYSTEM]/usr/bin/killall pppoe-relay killall: pppoe-relay: no process killed [SYSTEM]/sbin/ifconfig eth0.2 0.0.0.0 >/dev/null 2>&1 [SYSTEM]/usr/bin/killall pppd1 > /dev/null killall: pppd1: no process killed [3g/3g.c::hard_reset_usbport():234] try reset 3g [3g/3g.c::hard_reset_usbport():242] find P: Vendor=1a40 ProdID=0101 [3g/3g.c::hard_reset_usbport():252] devnum:4, busnum:1 [SYSTEM]hub_ctl -b 1 -d 4 -P 3 -p [SYSTEM]led_app off 98 [SYSTEM]led_app on 98 [SYSTEM]hub_ctl -b 1 -d 4 -P 3 -p 1 [SYSTEM]/bin/mv /tmp/tmpfile.FfYeDO /etc/gsmtd.conf [SYSTEM]/bin/mv /tmp/tmpfile.XEmpRs /etc/gsmtd.conf [SYSTEM]/bin/mv /tmp/tmpfile.Ng6Mz6 /etc/gsmtd.conf [SYSTEM]/bin/mv /tmp/tmpfile.gMttJj /etc/gsmtd.conf [SYSTEM]/bin/mv /tmp/tmpfile.h6qGef /etc/gsmtd.conf [SYSTEM]/bin/mv /tmp/tmpfile.zs8aYD /etc/gsmtd.conf [SYSTEM]/bin/mv /tmp/tmpfile.eHUzVM /etc/gsmtd.conf [SYSTEM]/usr/sbin/dongle_monitor -c /etc/gsmtd.conf & add... [rc debug]/usr/sbin/rc kcode start ap_name=kcode action=start [SYSTEM]/bin/cp /proc/uptime /var/run/rc.kcode.run [SYSTEM]/bin/cp /proc/uptime /var/run/rc.kcode.run can't find this application [SYSTEM]/bin/cp /proc/uptime /var/run/rc.kcode.run can't find this application Please press Enter to activate this console. Starting pid 1491, console /dev/console: '/bin/sh' BusyBox v1.00 (2013.01.18-06:47+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. # [rc debug]rc 3g create ap_name=3g action=create [SYSTEM]/bin/cp /proc/uptime /var/run/rc.3g.run [SYSTEM]/bin/cp /proc/uptime /var/run/rc.3g.run can't find this application [SYSTEM]/bin/cp /proc/uptime /var/run/rc.3g.run [rc.c::rc_create():691] Calling Create function of 3g [SYSTEM]/bin/mv /tmp/tmpfile.h4VW4X /etc/ppp/peers/3g [SYSTEM]/bin/mv /tmp/tmpfile.Wva0En /etc/ppp/peers/3g run in AUTO band no hsdpa_forceplmn in nv do nothing atcmdCmdRun: open fd_tty because fd_tty is -99


Stock: /proc/bus/usb/devices
# cat /proc/bus/usb/devices

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.22 ohci_hcd
S:  Product=OHCI Host Controller
S:  SerialNumber=0000:00:04.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 2
B:  Alloc=  1/800 us ( 0%), #Int=  3, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.22 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:04.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=480 MxCh= 4
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=02 MxPS=64 #Cfgs=  1
P:  Vendor=1a40 ProdID=0101 Rev= 1.00
S:  Product=USB 2.0 Hub [MTT]
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=01 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms
I:* If#= 0 Alt= 1 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=02 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms

T:  Bus=01 Lev=02 Prnt=04 Port=02 Cnt=01 Dev#=  6 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1199 ProdID=68a3 Rev= 0.06
S:  Manufacturer=Sierra Wireless, Incorporated
S:  Product=MC7710
S:  SerialNumber=358178040247324
C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=sierra
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=sierra
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=sierra
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=sierra
E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=sierra
E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=sierra_net
E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
Stock: /proc/bus/pci/devices
# cat devices
0000 14e40800 8 18000000  0  0  0  0  0  0      1000      1000  0  0  0  0       800 
0008 14e44329 3 18001000  0  0  0  0  0  0      1000      1000  0  0  0  0       800 wl
0010 14e44715 4 18002000  0  0  0  0  0  0      1000      1000  0  0  0  0       800 et
0020 14e4471a 5 18009000  0  0  0  0  0  0      1000  0  0  0  0  0       800 ohci_hcd
0021 14e4471a 5 18004000  0  0  0  0  0  0      1000  0  0  0  0  0       800 ehci_hcd
0028 14e4082e d 18005000  0  0  0  0  0  0      1000      1000  0  0  0  0       800 
0030 14e44711 e 18006000  0  0  0  0  0  0      1000      1000  0  0  0  0       800 
0038 14e4080e 8 18007000  0  0  0  0  0  0      1000      1000  0  0  0  0       800 
Stock: /proc/mtd
# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00607820 00010000 "rootfs"
mtd1: 00770000 00010000 "fs+kernel"
mtd2: 00020000 00010000 "bootloader"
mtd3: 00010000 00010000 "sc_nvram"
mtd4: 00010000 00010000 "POT"
mtd5: 00010000 00010000 "traffic_meter"
mtd6: 00010000 00010000 "DPF"
mtd7: 00010000 00010000 "nvram"
mtd8: 00010000 00010000 "English UI"
mtd9: 00010000 00010000 "Chinese UI"
mtd10: 00010000 00010000 "Russian UI"
mtd11: 00020000 00010000 "Danish UI"
mtd12: 00020000 00010000 "Swedish UI"
mtd13: 00010000 00010000 "Other UI"
mtd14: 00010000 00010000 "tm3g"

/proc/mounts

# cat /proc/mounts
rootfs / rootfs rw 0 0
/dev/root / squashfs ro 0 0
/proc /proc proc rw 0 0
sysfs /sys sysfs rw 0 0
ramfs /tmp ramfs rw 0 0
ramfs /dev ramfs rw 0 0
devpts /dev/pts devpts rw 0 0
none /proc/bus/usb usbfs rw 0 0
Stock: nvram show

# nvram show time_zone=GMT+0 time_daylight= restore_default=0 wiz_language=English wiz_country= fix_ipaddr= fix_netmask= fix_gateway= wan_ifname=ppp0 wan_mode=hsdpa wan_iptype=Dynamic wan_ipaddr= wan_netmask= wan_gateway= wan_mtu=1500 wan_fix_dns=0 wan_dns1= wan_dns2= wan_macaddr= wan_encap=1 wan_vpi=0 wan_vci=38 wan_dslmode=MMODE wan_account=MBR1517 wan_domain= wan_dod=1 wan_pppoe_relay=0 device_name=MBR1517 lan_if=br0 lan_ipaddr=192.168.1.1 lan_netmask=255.255.255.0 lan_bipaddr=192.168.1.255 dhcp_server_enable=1 dhcp_start_ip=192.168.1.2 dhcp_end_ip=192.168.1.254 dhcp_reserved= http_username=admin http_password=password http_timeout=5 rt_static_route= rt_rip_version=0 rt_rip_direction=both ddns_enable=0 ddns_service_provider=dyndns ddns_user_name= ddns_password= ddns_host_name= ddns_use_wildcards=0 pppoe_username= pppoe_password= pppoe_idle=5 pppoe_service= pptpc_server=10.0.0.138 pppoa_username=Guest pppoa_password= pppoa_idle=0 pppoa_ipaddr= wifi_ssid=NETGEAR-3G wifi_ssid2=NETGEAR_Guest1 wifi_ssid3=NETGEAR_Guest2 wifi_ssid4=NETGEAR_Guest3 wifi_region=Europe wifi_channel=0 wifi_auth_type=3 wifi_auth_type2=3 wifi_auth_type3=3 wifi_auth_type4=3 wifi_key_len=0 wifi_key_len2=0 wifi_key_len3=0 wifi_key_len4=0 wifi_def_key=1 wifi_def_key2=1 wifi_def_key3=1 wifi_def_key4=1 wifi_key1= wifi_key2= wifi_key3= wifi_key4= wifi_key12= wifi_key22= wifi_key32= wifi_key42= wifi_key13= wifi_key23= wifi_key33= wifi_key43= wifi_key14= wifi_key24= wifi_key34= wifi_key44= wifi_psk_pwd= wifi_psk_pwd2= wifi_psk_pwd3= wifi_psk_pwd4= wifi_access_control=0 wifi_access_list= wifi_if_on=1 wifi_if_on2=0 wifi_if_on3=0 wifi_if_on4=0 wifi_broadcast_ssid=1 wifi_broadcast_ssid2=1 wifi_broadcast_ssid3=1 wifi_broadcast_ssid4=1 wifi_allow_guest2=0 wifi_allow_guest3=0 wifi_allow_guest4=0 wifi_wep_on=0 wifi_wep_on2=0 wifi_wep_on3=0 wifi_wep_on4=0 wifi_dot11_mode=7 wifi_dot11_iso=0 wifi_radius_port=1812 wifi_wds=0 wifi_wds_apmode=repeater wifi_wds_bridge0mac= wifi_wds_bridge1mac= wifi_wds_bridge2mac= wifi_wds_bridge3mac= wifi_wds_bridge4mac= wifi_wds_repeater1mac= wifi_wds_repeater2mac= wifi_wds_repeater3mac= wifi_wds_repeater4mac= wifi_frag_thre=2346 wifi_rts_thre=2347 wifi_enable_shortpreamble=1 wifi_ssid1=NETGEAR-DualBand-N wifi_ssid12=NETGEAR-5G_Guest1 wifi_ssid13=NETGEAR-5G_Guest2 wifi_ssid14=NETGEAR-5G_Guest3 wifi_ssid12_bgn=0 wifi_ssid12_abgn=0 wifi_region1=Asia wifi_channel1=36 wifi_auth_type1=3 wifi_auth_type12=3 wifi_auth_type13=3 wifi_auth_type14=3 wifi_key_len1=0 wifi_key_len12=0 wifi_key_len13=0 wifi_key_len14=0 wifi_def_key1=1 wifi_def_key12=1 wifi_def_key13=1 wifi_def_key14=1 wifi_key11= wifi_key21= wifi_key31= wifi_key41= wifi_key112= wifi_key212= wifi_key312= wifi_key412= wifi_key113= wifi_key213= wifi_key313= wifi_key413= wifi_key114= wifi_key214= wifi_key314= wifi_key414= wifi_psk_pwd1= wifi_psk_pwd12= wifi_psk_pwd13= wifi_psk_pwd14= wifi_access_control1=0 wifi_access_list1= wifi_if_on1=1 wifi_if_on12=0 wifi_if_on13=0 wifi_if_on14=0 wifi_broadcast_ssid1=1 wifi_broadcast_ssid12=1 wifi_broadcast_ssid13=1 wifi_broadcast_ssid14=1 wifi_allow_guest12=0 wifi_allow_guest13=0 wifi_allow_guest14=0 wifi_wep_on1=0 wifi_wep_on12=0 wifi_wep_on13=0 wifi_wep_on14=0 wifi_dot11_mode1=8 wifi_dot11_iso2=0 wifi_radius_port1=1812 wifi_radius_rekey_secs=3600 wifi_radius_rekey_secs1=3600 wifi_wds1=0 wifi_wds_apmode1=point wifi_wds_bridge0mac1= wifi_wds_bridge1mac1= wifi_wds_bridge2mac1= wifi_wds_bridge3mac1= wifi_wds_bridge4mac1= wifi_wds_repeater1mac1= wifi_wds_repeater2mac1= wifi_wds_repeater3mac1= wifi_wds_repeater4mac1= wifi_band=2 wifi_band1=2 wifi_keep_wep_page=0 wifi_dome_off=0 mail_enable=0 mail_logfull=0 mail_sendlog=2 mail_server= mail_recipient= mail_dos=1 mail_portscan=1 mail_block=1 mail_sh_day=0 mail_sh_hour=1 log_asites=1 log_block=1 log_dos=1 log_login=1 log_gateway=1 log_fwd=1 log_wlan=1 log_type=0 log_remote_ip= fw_disable=0 fw_nat=1 fw_block=0 fw_block_keyword= fw_block_trust_enable=0 fw_block_trust= fw_services_def=AIMtcp5190-5190 Age-of-Empireudp47624-47624 FTPtcp20-21 HTTPtcp80-80 ICUIItcp23566-23566 IP_Phonetcp6670-6670 NetMeetingtcp1720- 1720 Newstcp119-119 PPTPtcp1723-1723 QuakeII/IIIboth27960-27960 Real-Audioboth6970-7170 Telnettcp23-23 fw_services= fw_in_rules= fw_out_rules= fw_dmz_enable=0 fw_dmz= fw_spi=1 fw_response_ping=0 fw_schedule=1111111:00:00-24:00 fw_time_zone=GMTb fw_remote=0 fw_remote_type= fw_remote_range_start= fw_remote_range_end= fw_remote_single= fw_remote_port=8080 fw_acc_lan=0 fw_acc_port=8080 fw_import=0 fw_service_block=0 ntp_custom=0 ntp_server= upnp_enable=1 upnp_adv_time=30 upnp_ttl=4 upnp_permission=enable upnp_default= upnp_custom= snmp_enable=0 snmp_read_community= snmp_sys_name= snmp_sys_contact= snmp_sys_location= blank_state=0 ca_wsectype=wep wan_vpi_change=0 wan_vci_change=0 dis_sip_alg=0 wan_conn_method=2 adslwan_mode_backup=dhcpc detect_method=1 detect_dns_hostname= detect_ping_ip= detect_retry_interval=30 detect_retry_num=2 detect_resume_time=30 detect_hw_link=1 detect_hwlink_failtime=30 hsdpa_gui_vis=1 hsdpa_username=guest hsdpa_password=guest hsdpa_country=0 hsdpa_isp=0 hsdpa_pin= hsdpa_puk= hsdpa_pin2= hsdpa_puk2= hsdpa_access_num=1 hsdpa_apn= hsdpa_pdp_type=0 hsdpa_autoconn=1 hsdpa_autoreconn=1 hsdpa_idletime=0 hsdpa_noroaming=0 hsdpa_meplockleft=10 sierra_module_band=0 hsdpa_username1=guest hsdpa_username2=guest hsdpa_username3=guest hsdpa_username4=guest hsdpa_username5=guest hsdpa_password1=guest hsdpa_password2=guest hsdpa_password3=guest hsdpa_password4=guest hsdpa_password5=guest hsdpa_country1=0 hsdpa_country2=0 hsdpa_country3=0 hsdpa_country4=0 hsdpa_country5=0 hsdpa_isp1=0 hsdpa_isp2=0 hsdpa_isp3=0 hsdpa_isp4=0 hsdpa_isp5=0 hsdpa_access_num1=0 hsdpa_access_num2=1 hsdpa_access_num3=2 hsdpa_access_num4=3 hsdpa_access_num5=4 hsdpa_apn1= hsdpa_apn2= hsdpa_apn3= hsdpa_apn4= hsdpa_apn5= hsdpa_pdp_type1=0 hsdpa_pdp_type2=0 hsdpa_pdp_type3=0 hsdpa_pdp_type4=0 hsdpa_pdp_type5=0 hsdpa_profile=Profile1 hsdpa_profile1=Profile2 hsdpa_profile2=Profile3 hsdpa_profile3=Profile4 hsdpa_profile4=Profile5 hsdpa_profile5=Profile6 hsdpa_currentprofile=0 hsdpa_totalprofile=6 ssidn=2 wps_aplockdown_forceon=0 wps_config_state=0 wps_device_pin=28560098 wps_mode=enabled pro_count=0 wl_ssid=NETGEAR wl0_ssid=NETGEAR_11G wl0_channel=0 enable_igmp=1 needfwcheck=0 popwindow=1 autoupg_server= interface=wan1,wan2,wan3,wan4,wan5,wan6,wan7,wan8,vlan1,vlan2,vlan3,vlan4,ssid1,ssid2,ssid3,ssid4,PhonePort(1&2) qos_enable=0 qos_uplink_rate=256 qos_rate_unit=Kbps qos_bw_sel=1 predef_qos_rules=0MSN Messenger+1863,6901,6891-6900+1863,5190,69011 0Skype+80,443+0 0Yahoo Messenger+5050,5150,5001,1614,80+1 0IP Phone+1718-17 20,1731,22136,5060,6670+66700 0Vonage IP Phone++53,69,123,5060,5061,10000-200000 0NetMeeting+389,522,1503+1 0AIM+5190-5193,2773,2153+1 0Google T alk+5222,5223,433+0 0Netgear EVA++49152-491550 1Counter Strike+27030-27039+1200,27000-270151 1Age of Empires+47624,2300-2400+2300-24001 1Diabl o II+6112,4000+1 1Everquest+7000+5999,59981 1Half Life++6003,7002,270251 1Quake 2++279101 1Quake 3++27660-276651 1Quake 4++28004,279501 1Unreal Tourment+8080+7777,7778,7779-7781,27900,275001 1Warcraft+6113-6119,3724,6881-6890,6902-6999+1 1World of Warcraft+3724,6112-6119+1 1Retur n to Castle Wolfenstein++27950,27960,27965,279521 apply_qos_rules=0MSN Messenger+1863,6901,6891-6900+1863,5190,69011 0Yahoo Messenger+5050,5150,5001,1614,80+1 0IP Phone+1718-1720,1731,22136,5060,66 70+66700 0Vonage IP Phone++53,69,123,5060,5061,10000-200000 0NetMeeting+389,522,1503+1 0AIM+5190-5193,2773,2153+1 0Google Talk+5222,5223,433+ 0 0Netgear EVA++49152-491550 1Counter Strike+27030-27039+1200,27000-270151 1Age of Empires+47624,2300-2400+2300-24001 1Everquest+7000+5999,5998 1 1Quake 2++279101 1Quake 3++27660-276651 1Unreal Tourment+8080+7777,7778,7779-7781,27900,275001 1Warcraft+6113-6119,3724,6881-6890,6902-6999+ 1 qos_prio_level=3;Low!2;Normal!1;High!0;Highest wmm_enable=1 firstpageiswiz=1 smb_server_enable=1 storage_machine_name=readyshare storage_new_workgroup=Workgroup storage_share_def=U:USB_Storage:-:0:0 T:T_Drive:-:0:0 S:S_Drive:-:0:0 R:R_Drive:-:0:0 storage_share= ftp_server_wan_port=21 http_server_wan_port=443 http_server_enable=1 http_server_wan_enable=0 ftp_server_wan_enable=0 ftp_server_enable=0 storage_allow_all=1 port_forward_dis=0 port_forward_rules= port_trigger_dis=0 port_trigger_timeout=20 port_trigger_rules= tm_enable=0 tm_limit_by=0 tm_limit_dir=0 tm_limit_volumn= tm_limit_time= tm_roundup_volumn=0 tm_reset_hour=0 tm_reset_minute=00 tm_ampm=am tm_reset_day=1 tm_start_time=0 tm_watermark=0 tm_action_led=0 tm_action_internet=0 tm_poll_interval=10 tm_storage= tm_mtd_inited=0 tm_3g_enable=0 tm_3g_limit_by=0 tm_3g_limit_dir=0 tm_3g_limit_volumn= tm_3g_limit_time= tm_3g_roundup_volumn=0 tm_3g_reset_hour=00 tm_3g_reset_minute=00 tm_3g_ampm=am tm_3g_reset_day=1 tm_3g_start_time=0 tm_3g_watermark=0 tm_3g_action_led=0 tm_3g_action_internet=0 tm_3g_poll_interval=10 tm_3g_storage= tm_3g_mtd_inited=0 ParentalControl=0 PC_table= nat_filter=security super_username=Gearguy super_password=Geardog pptpc_idletime=5 enable_guistringtable=1 is_default=0 tm_gui_type=0 wifi_button_ctl=0 3g_radio_status=1 mt_3g_ant_internal=0 cwmp_enable=1 cwmp_oui=0026F2 cwmp_modelname=DGN1000SP cwmp_pvcode=DGN.1000 cwmp_acsurl=http://tr69n.virginmedia.co.uk cwmp_acsuser= cwmp_acspwd= cwmp_pinfe=1 cwmp_pinterval=86400 cwmp_ptime=1970-01-01T00:00:00 cwmp_paramkey= cwmp_cpeurl= cwmp_cpeport=7547 cwmp_cpeuser= cwmp_cpepwd= cwmp_upgrademg=0 cwmp_wanip_name= cwmp_wanppp_name= cwmp_eventcode=0 cwmp_wanconnectiondevice=1 cwmp_wanipconnection=1 cwmp_wanpppconnection=1 cwmp_wanipconenable=1 cwmp_wandslcfgenable=1 cwmp_upgrade=1 cwmp_iface=wan cwmp_eventstruct=0 cwmp_cmdkey= cwmp_pinhost= cwmp_pinsize=60 cwmp_pinnum=1 cwmp_pinitv=1 cwmp_pintimeout=5000 cwmp_fw_in_rules_flag=0 cwmp_rt_static_route_flag=0 cwmp_catype=dls cwmp_acsca= cwmp_dlsca= cwmp_dlstime= cwmp_dletime= cwmp_dlfcode= cwmp_method= cwmp_event7= cwmp_dlcmdkey= cwmp_RebootCmdKey= cwmp_downfile= sms_new_msg=0 wifi_mac=10:0D:7F:2F:85:68 wifi_mac1=10:0D:7F:2f:85:67 wan_def_mac=10:0D:7F:2f:85:69 wifi_mac2=62:0D:7F:2F:85:69 wifi_mac12=62:0D:7F:2f:85:66 wifi_present=1 get_actual_up_rate= board_id_in_nv=MBR1517 nextpg_noauth= http_auth_pass=0 dngl_plug_time=51 </code> ===== Debricking ===== ==== Flashing with serial console and CFE ==== <b>Ethernet works in CFE!</b> The "CFE version 5.60.101 based on BBP 1.0.37" does support the nvram command. Output is stripped down: for example there are no help texts available. Example of working command: configure hw macaddr like Netgear factory image <code> ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0 </code> ===== WNDR3400v3 ===== According to FCC photos a BCM5358 CPU with a BCM43236KMLG radio. Like with the WNDR3400v2 support of the radio might be depending on the used chip revision. There is no driver for BCM43236 rev1 + rev2 - see comment at [http://permalink.gmane.org/gmane.linux.kernel.wireless.general/91453 linux-wireless] (May 2012) ===== Restore factory settings / bricked device ===== If you damage some partitions with configuration data you might see the following even if you have flashed the original firmware back to the device * CFE bootloader with MAC 00:00:00:00:00:00 * no settings matching the sticker on the unit To restore those settings Netgear provides several "burn-in" tools. These tools write certain nvram data (nvram set/commit does not remember after reboots) <code> burn_hw_rev burn5gpass burn5gssid burnboardid burnethermac burnpass burnpin burnrf burnsku burnsn burnssid


Tags

toh/netgear/mbr1310.txt · Last modified: 2018/09/05 21:51 by wigyori