Show pagesourceOld revisionsBacklinksBack to top × Netgear firmware boot log Initiating BCM5380 ... ok +starting api entry Ethernet eth0: MAC address 00:14:6c:cb:xx:xx IP: 192.168.16.244/255.255.255.0, Gateway: 0.0.0.0 Default server: 192.168.16.1, DNS server IP: 0.0.0.0 RedBoot(tm) bootstrap and debug environment [ROM] Red Hat certified release, version 1.92p1 - built 19:39:46, Dec 11 2004 Platform: NetGear FVX538 (XScale) Copyright (C) 2000, 2001, 2002, Red Hat, Inc. RAM: 0x00000000-0x02000000, 0x0001e758-0x01fdd000 available FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each. RedBoot> boot Partition Priority Firm/Cfg-Ver BuildTime FileName appimg1(V) 3 2.0.1-5/1.0 Tue Nov 21 14:24:47 2006 fvx538_v2.0.1-5.img appimg2(V) 4 2.0.1-5/1.0 Tue Nov 21 14:24:47 2006 fvx538_v2.0.1-5.img Booting application image from partition appimg2 ... Downloading Image to RAM location 0x1600000 ... Transfering control to downloading Image at address 0x160024c ... powering down the PHYs Uncompressing Linux............................................................................................................. done, booting the kernel. Linux version 2.6.10_mvl401 (build@TeamF1 Copyright (c) 2006, TeamF1, Inc.) (gcc version 3.4.3 (MontaVista 3.4.3-25.0.30.0501131 2005-07-23)) #164 Tue Nov 21 14:24:29 IST 2006 CPU: XScale-IXP42x Family [690541c1] revision 1 (ARMv5TE) CPU0: D VIVT undefined 5 cache CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets Machine: Netgear FVX538 Memory policy: ECC disabled, Data cache writeback Built 1 zonelists Kernel command line: console=ttyS0,115200 PID hash table entries: 256 (order: 8, 4096 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 32MB = 32MB total Memory: 28672KB available (1612K code, 454K data, 1668K init) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok spawn_desched_task(00000000) desched cpu_callback 3/00000000 ksoftirqd started up. desched cpu_callback 2/00000000 desched thread 0 started up. NET: Registered protocol family 16 PCI: IXP4xx is host PCI: IXP4xx Using direct access for memory space PCI: bus0: Fast back to back transfers enabled dmabounce: registered device 0000:00:01.0 on pci bus dmabounce: registered device 0000:00:0f.0 on pci bus Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled ttyS0 at MMIO 0xc8001000 (irq = 13) is a XScale io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) PPP generic driver version 2.4.2 PPP BSD Compression module registered NET: Registered protocol family 24 r8169 Gigabit Ethernet driver 1.2 loaded eth0: RTL8169 at 0xc280e000, 00:14:6c:cb:xx:xx, IRQ 7 elevator: using anticipatory as default io scheduler IXP4XX-Flash0: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled Searching for RedBoot partition table in IXP4XX-Flash0 at offset 0xfe0000 6 RedBoot partitions found on MTD device IXP4XX-Flash0 Creating 6 MTD partitions on "IXP4XX-Flash0": 0x00000000-0x00040000 : "RedBoot" 0x00040000-0x007c0000 : "appimg1" 0x007c0000-0x00f40000 : "appimg2" 0x00f40000-0x00fc0000 : "igwpri" 0x00fc0000-0x00fc1000 : "RedBoot config" 0x00fe0000-0x01000000 : "FIS directory" NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) ip_conntrack version 2.1 (256 buckets, 2048 max) - 360 bytes per conntrack ip_conntrack_rtsp v0.01 loading ip_nat_rtsp v0.01 loading ip_tables: (C) 2000-2002 Netfilter core team netfilter PSD loaded - (c) astaro AG ipt_account 0.1.7 : Piotr Gasid³o , http://www.barbara.eu.org/~quaker/ipt_account/ ipt_time loading NET: Registered protocol family 1 NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller Freeing init memory: 1668K Booting XScale UserSpace Linux (none) 2.6.10_mvl401 #164 Tue Nov 21 14:24:29 IST 2006 armv5teb unknown Starting system... Mounting /proc: done. Mounting '/' read-write: done. Brining up loopback interface: done. Mounting /tmp: mount: Mounting /tmpfs on /tmp failed: Invalid argument done. Starting portmap: done. Setting Hostname: done. Running ixpInit ixp400_eth: Initializing IXP400 NPE Ethernet driver software v. 1.5.1 ixp400_eth: CPU clock speed (approx) = 532 MHz ixp400_eth: ixp0 is using NPEB and the PHY at address 4 ixp400_eth: ixp1 is using NPEC and the PHY at address 12 ixp400_eth: Use default MAC address 00:02:b3:01:xx:xx for port 0 ixp400_eth: Use default MAC address 00:02:b3:02:xx:xx for port 1 done. Running usrInit Enabling Quite Boot...Done Initializing interfaces...Done Loading Modules...Done Creating devices...Done Enabling Cavium...Done Enabling Forwarding...Done Setting hostname as FVX538...Done Initializing System Files...Done Starting DNS Proxy...Done Starting Cron...Done Starting Inetd...Done Starting HTTP Daemon...Done Starting WAN daemon...Done Starting Lan Scanner...Done Starting Factory Reset Daemon...Done Starting IKE Daemon...Done Resetting Configuration...Done Loading Configuration...Done Copyright (c) 2006, TeamF1, Inc. done. System started. FVX538 login: exovii Password: ******************************************************************************** Welcome To The Netgear FVX538 Command Line Interface ******************************************************************************** FVX538$ This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.OKMore information about cookies Last modified: 2010/10/04 16:12by jow