User Tools

Site Tools


toh:mikrotik:rb951ui

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
toh:mikrotik:rb951ui [2018/08/08 17:52]
thiagoc [Initial setup]
toh:mikrotik:rb951ui [2018/10/10 19:38] (current)
francobarber
Line 93: Line 93:
         option default '​0'​         option default '​0'​
  
-There is a red LED on port 5, which seems to be some indication of PoE (apparently enabled by default). You can turn the LED off (PoE will continue supplying power over port 5, even without the red LED on) with the following command. You can put it in /​etc/​rc.local+There is a red LED on port 5, which seems to be some indication of PoE (apparently enabled by default). You can turn the LED off (PoE will continue supplying power over port 5, even without the red LED on **[However, see Note below]** ​) with the following command. You can put it in /​etc/​rc.local
  
   echo 0 > /​sys/​class/​gpio/​gpio2/​value   echo 0 > /​sys/​class/​gpio/​gpio2/​value
 +** Note 2018-10-10 **
 +Using OpenWRT 18.06.1, after the above command is issued the red LED turns off //and// PoE power is turned off.
  
 === Built in ethernet switch === === Built in ethernet switch ===
toh/mikrotik/rb951ui.1533750765.txt.gz · Last modified: 2018/08/08 17:52 by thiagoc