Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revisionBoth sides next revision
toh:mikrotik:rb750up [2019/02/12 20:43] – 432 warning added; some cleanup tmomastoh:mikrotik:rb750up [2019/03/06 22:46] – OpenWrt spelling; bootlog formatting applied; datatables added tmomas
Line 1: Line 1:
-======Mikrotik Routerboard RB750UP======+====== Mikrotik Routerboard RB750UP ======
  
 {{section>meta:infobox:432_warning#infobox_for_dataentries&noheader&nofooter&noeditbutton}} {{section>meta:infobox:432_warning#infobox_for_dataentries&noheader&nofooter&noeditbutton}}
  
-The Routerboard 750UP is a five port ethernet router and is passive PoE capable on all ports. The device is supported at least with Barrier Breaker (OpenWRT).+The Routerboard 750UP is a five port ethernet router and is passive PoE capable on all ports. The device is supported at least with Barrier Breaker (OpenWrt).
  
-===== Info ===== +===== Supported Versions ===== 
-^ [[wp>Instruction set|Architecture]]       | [[wp>MIPS architecture|MIPS]] MIPS 24Kc | +---- datatable ---- 
-^ Vendor                                    | [[wp>Qualcomm Atheros]] | +cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, OWrt Forum Topic URL_url, Device Techdata_pageid 
-^ [[docs:techref:bootloader]]               | RouterBoot | +headers Brand, Model, Version, Current Release, OEM Info, Forum Topic, Technical Data 
-^ [[docs:techref:hardware:soc|System-On-Chip]]  | AR7241 (MIPS) | +align   c,c,c,c,c,c,c 
-^ [[docs:techref:hardware:cpu|CPU]]/Speed       | 400 MHz +filter  Model=RB750UP 
-Flash-Chip         | Samsung 313 NAND  | +---- 
-Flash size         | 64 MiB   | + 
-RAM                | 32 MiB   | + 
-^ Network            | Atheros AG71xx | +===== Hardware Highlights ===== 
-^ [[docs:techref:hardware:switch]]  | Atheros AR7240/AR9330 (passive PoE capable) | +---- datatable ---- 
-^ USB                | Yes 1 x 2.0 |+cols    Model, Versions, CPU, CPU MHzFlash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4GHz, WLAN 5.0GHz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_ 
 +header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB 
 +align   c,c,c,c,c,c,c,c,c,c,c,c,
 +filter  : Model=RB750UP 
 +----
  
  
 ===== Installation ===== ===== Installation =====
 +---- datatable ----
 +cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url
 +headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock
 +align   : c,c,c
 +filter  : Model=RB750UP
 +----
  
-Similiar to the routerboard 750.+Similiar to the [[toh:mikrotik:rb750|Routerboard 750]].
  
-  - Prepare an OpenWRT Ramdisk Image (Target: AR7XX, Subtarget: Mikrotik NAND Flash) or use [[http://cholin.spline.de/freifunk/openwrt/rb750up/openwrt-ar71xx-mikrotik-vmlinux-initramfs.elf|this]]+  - Prepare an OpenWrt Ramdisk Image (Target: AR7XX, Subtarget: Mikrotik NAND Flash) or use [[http://cholin.spline.de/freifunk/openwrt/rb750up/openwrt-ar71xx-mikrotik-vmlinux-initramfs.elf|this]]
   - Configure a TFTP and DHCP Server. For informations how to do this see [[https://blog.poettner.de/2011/05/27/openwrt-trunk-on-mikrotik-routerboard-411750/|Wolf's Tech Blog]].   - Configure a TFTP and DHCP Server. For informations how to do this see [[https://blog.poettner.de/2011/05/27/openwrt-trunk-on-mikrotik-routerboard-411750/|Wolf's Tech Blog]].
   - Connect yourself via cable into Port 1 and start your DHCP/TFTP servers.   - Connect yourself via cable into Port 1 and start your DHCP/TFTP servers.
   - Boot the Routerboard into TFTP-Mode by pressing the RES button for several seconds until ACT led is not blinking anymore.   - Boot the Routerboard into TFTP-Mode by pressing the RES button for several seconds until ACT led is not blinking anymore.
   - Plug a network cable into port 3 and flash openwrt into the flash memory:   - Plug a network cable into port 3 and flash openwrt into the flash memory:
-     * serve your self-build OpenWRT images via http: ''$ python -m SimpleHTTPServer .'' or use [[http://cholin.spline.de/freifunk/openwrt/rb750up/|this]]+     * serve your self-build OpenWrt images via http: ''$ python -m SimpleHTTPServer .'' or use [[http://cholin.spline.de/freifunk/openwrt/rb750up/|this]]
      * telnet into the device: ''$ telnet 192.168.1.1''      * telnet into the device: ''$ telnet 192.168.1.1''
-     * flash via wget2nand: ''$ wget2nand http://your-ip:8080'' or ''$ wget2nand http://cholin.spline.de/freifunk/openwrt/rb750up/'' (you need internet connection on your device (via wan))+     * flash via wget2nand: ''%%$ wget2nand http://your-ip:8080'' or ''$ wget2nand http://cholin.spline.de/freifunk/openwrt/rb750up/%%'' (you need internet connection on your device (via wan))
  
  
 For more infos see [[http://www.ericconrad.com/2012/05/installing-openwrt-on-routerboard-750gl.html|ericconrad.com]] and [[https://blog.poettner.de/2011/05/27/openwrt-trunk-on-mikrotik-routerboard-411750/|blog.poettner.de]] For more infos see [[http://www.ericconrad.com/2012/05/installing-openwrt-on-routerboard-750gl.html|ericconrad.com]] and [[https://blog.poettner.de/2011/05/27/openwrt-trunk-on-mikrotik-routerboard-411750/|blog.poettner.de]]
 +
 +===== Info =====
 +^ [[wp>Instruction set|Architecture]]       | [[wp>MIPS architecture|MIPS]] MIPS 24Kc |
 +^ Vendor                                    | [[wp>Qualcomm Atheros]] |
 +^ [[docs:techref:bootloader|Bootloader]]               | RouterBoot |
 +^ [[docs:techref:hardware:soc|System-On-Chip]]  | AR7241 (MIPS) |
 +^ [[docs:techref:hardware:cpu|CPU]]/Speed       | 400 MHz |
 +^ Flash-Chip         | Samsung 313 NAND  |
 +^ Flash size         | 64 MiB   |
 +^ RAM                | 32 MiB   |
 +^ Network            | Atheros AG71xx |
 +^ [[docs:techref:hardware:switch|Switch]]  | Atheros AR7240/AR9330 (passive PoE capable) |
 +^ USB                | Yes 1 x 2.0 |
 +
  
 ===== Kernel boot log ===== ===== Kernel boot log =====
-<code+<WRAP bootlog
-[    0.000000] Linux version 3.10.32 (X@X) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r39757) ) #11 Thu Feb 27 17:16:35 CET 2014+<nowiki>[    0.000000] Linux version 3.10.32 (X@X) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r39757) ) #11 Thu Feb 27 17:16:35 CET 2014
 [    0.000000] bootconsole [early0] enabled [    0.000000] bootconsole [early0] enabled
 [    0.000000] CPU revision is: 00019374 (MIPS 24Kc) [    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
Line 139: Line 163:
 [   12.780000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [   12.780000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
 [   12.980000] PPP generic driver version 2.4.2 [   12.980000] PPP generic driver version 2.4.2
-[   13.030000] NET: Registered protocol family 24 +[   13.030000] NET: Registered protocol family 24</nowiki> 
-</code>+</WRAP>\\
  
 ===== Photos ===== ===== Photos =====
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1