Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:mikrotik:rb750up [2018/03/31 23:23] – ↷ Links adapted because of a move operation bobafetthotmailtoh:mikrotik:rb750up [2019/03/06 22:46] – OpenWrt spelling; bootlog formatting applied; datatables added tmomas
Line 1: Line 1:
-======Mikrotik Routerboard RB750UP======+====== Mikrotik Routerboard RB750UP ======
  
-The Routerboard 750UP is a five port ethernet router and is passive PoE capable on all ports. The device is supported at least with Barrier Breaker (OpenWRT).+{{section>meta:infobox:432_warning#infobox_for_dataentries&noheader&nofooter&noeditbutton}}
  
-===== Info ===== +The Routerboard 750UP is a five port ethernet router and is passive PoE capable on all ports. The device is supported at least with Barrier Breaker (OpenWrt). 
-| **[[wp>Instruction set|Architecture]]:**    | [[wp>MIPS architecture|MIPS]] MIPS 24Kc | + 
-| **Vendor:**          | [[wp>Qualcomm Atheros]] | +===== Supported Versions ===== 
-| **[[docs:techref:bootloader]]:**     | RouterBoot | +---- datatable ---- 
-| **[[docs:techref:hardware:soc|System-On-Chip]]:**  | AR7241 (MIPS) | +cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, OWrt Forum Topic URL_url, Device Techdata_pageid 
-| **[[docs:techref:hardware:cpu|CPU]]/Speed**        | 400 MHz +headers Brand, Model, Version, Current Release, OEM Info, Forum Topic, Technical Data 
-| **Flash-Chip:**      | Samsung 313 NAND  | +align   c,c,c,c,c,c,c 
-| **Flash size:**      | 64 MiB | +filter  Model=RB750UP 
-| **RAM:**             | 32 MiB   | +---- 
-| **Network:**        | Atheros AG71xx | + 
-| **[[docs:techref:hardware:switch]]:**        | Atheros AR7240/AR9330 (passive PoE capable) | + 
-| **USB:**             | Yes 1 x 2.0 |+===== Hardware Highlights ===== 
 +---- datatable ---- 
 +cols    Model, Versions, CPU, CPU MHzFlash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4GHz, WLAN 5.0GHz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_ 
 +header  Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB 
 +align   c,c,c,c,c,c,c,c,c,c,c,c,c 
 +filter  Model=RB750UP 
 +----
  
  
 ===== Installation ===== ===== Installation =====
 +---- datatable ----
 +cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url
 +headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock
 +align   : c,c,c
 +filter  : Model=RB750UP
 +----
  
-Similiar to the routerboard 750.+Similiar to the [[toh:mikrotik:rb750|Routerboard 750]].
  
-  - Prepare an OpenWRT Ramdisk Image (Target: AR7XX, Subtarget: Mikrotik NAND Flash) or use [[http://cholin.spline.de/freifunk/openwrt/rb750up/openwrt-ar71xx-mikrotik-vmlinux-initramfs.elf|this]]+  - Prepare an OpenWrt Ramdisk Image (Target: AR7XX, Subtarget: Mikrotik NAND Flash) or use [[http://cholin.spline.de/freifunk/openwrt/rb750up/openwrt-ar71xx-mikrotik-vmlinux-initramfs.elf|this]]
   - Configure a TFTP and DHCP Server. For informations how to do this see [[https://blog.poettner.de/2011/05/27/openwrt-trunk-on-mikrotik-routerboard-411750/|Wolf's Tech Blog]].   - Configure a TFTP and DHCP Server. For informations how to do this see [[https://blog.poettner.de/2011/05/27/openwrt-trunk-on-mikrotik-routerboard-411750/|Wolf's Tech Blog]].
   - Connect yourself via cable into Port 1 and start your DHCP/TFTP servers.   - Connect yourself via cable into Port 1 and start your DHCP/TFTP servers.
   - Boot the Routerboard into TFTP-Mode by pressing the RES button for several seconds until ACT led is not blinking anymore.   - Boot the Routerboard into TFTP-Mode by pressing the RES button for several seconds until ACT led is not blinking anymore.
   - Plug a network cable into port 3 and flash openwrt into the flash memory:   - Plug a network cable into port 3 and flash openwrt into the flash memory:
-     * serve your self-build OpenWRT images via http: ''$ python -m SimpleHTTPServer .'' or use [[http://cholin.spline.de/freifunk/openwrt/rb750up/|this]]+     * serve your self-build OpenWrt images via http: ''$ python -m SimpleHTTPServer .'' or use [[http://cholin.spline.de/freifunk/openwrt/rb750up/|this]]
      * telnet into the device: ''$ telnet 192.168.1.1''      * telnet into the device: ''$ telnet 192.168.1.1''
-     * flash via wget2nand: ''$ wget2nand http://your-ip:8080'' or ''$ wget2nand http://cholin.spline.de/freifunk/openwrt/rb750up/'' (you need internet connection on your device (via wan))+     * flash via wget2nand: ''%%$ wget2nand http://your-ip:8080'' or ''$ wget2nand http://cholin.spline.de/freifunk/openwrt/rb750up/%%'' (you need internet connection on your device (via wan))
  
  
 For more infos see [[http://www.ericconrad.com/2012/05/installing-openwrt-on-routerboard-750gl.html|ericconrad.com]] and [[https://blog.poettner.de/2011/05/27/openwrt-trunk-on-mikrotik-routerboard-411750/|blog.poettner.de]] For more infos see [[http://www.ericconrad.com/2012/05/installing-openwrt-on-routerboard-750gl.html|ericconrad.com]] and [[https://blog.poettner.de/2011/05/27/openwrt-trunk-on-mikrotik-routerboard-411750/|blog.poettner.de]]
 +
 +===== Info =====
 +^ [[wp>Instruction set|Architecture]]       | [[wp>MIPS architecture|MIPS]] MIPS 24Kc |
 +^ Vendor                                    | [[wp>Qualcomm Atheros]] |
 +^ [[docs:techref:bootloader|Bootloader]]               | RouterBoot |
 +^ [[docs:techref:hardware:soc|System-On-Chip]]  | AR7241 (MIPS) |
 +^ [[docs:techref:hardware:cpu|CPU]]/Speed       | 400 MHz |
 +^ Flash-Chip         | Samsung 313 NAND  |
 +^ Flash size         | 64 MiB   |
 +^ RAM                | 32 MiB   |
 +^ Network            | Atheros AG71xx |
 +^ [[docs:techref:hardware:switch|Switch]]  | Atheros AR7240/AR9330 (passive PoE capable) |
 +^ USB                | Yes 1 x 2.0 |
 +
  
 ===== Kernel boot log ===== ===== Kernel boot log =====
-<code+<WRAP bootlog
-[    0.000000] Linux version 3.10.32 (X@X) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r39757) ) #11 Thu Feb 27 17:16:35 CET 2014+<nowiki>[    0.000000] Linux version 3.10.32 (X@X) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r39757) ) #11 Thu Feb 27 17:16:35 CET 2014
 [    0.000000] bootconsole [early0] enabled [    0.000000] bootconsole [early0] enabled
 [    0.000000] CPU revision is: 00019374 (MIPS 24Kc) [    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
Line 137: Line 163:
 [   12.780000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [   12.780000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
 [   12.980000] PPP generic driver version 2.4.2 [   12.980000] PPP generic driver version 2.4.2
-[   13.030000] NET: Registered protocol family 24 +[   13.030000] NET: Registered protocol family 24</nowiki> 
-</code>+</WRAP>\\
  
 ===== Photos ===== ===== Photos =====
-{{media:mikrotik:rb750up_board-full.jpg?400|}} +{{media:mikrotik:mikrotik_rb750up_board-full.jpg?400|}} 
-{{media:mikrotik:rb750up_board-serial.jpg?400|}} +{{media:mikrotik:mikrotik_rb750up_board-serial.jpg?400|}} 
-{{media:mikrotik:rb750up_board-soc.jpg?400|}}+{{media:mikrotik:mikrotik_rb750up_board-soc.jpg?400|}} 
 + 
 +===== Tags ===== 
 +[[meta:tags|How to add tags]] 
 +{{tag>AR7241 64flash 32ram}}
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1