Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revisionBoth sides next revision
toh:mikrotik:rb5009ug_s_in [2022/03/04 12:23] – Created from the form at meta:create_new_device_page borrominitoh:mikrotik:rb5009ug_s_in [2024/10/02 18:37] – [Photos] jannoke
Line 1: Line 1:
 ====== MikroTik RB5009UG+S+IN ====== ====== MikroTik RB5009UG+S+IN ======
  
-/* This template is intended to be used via https://openwrt.org/meta/create_new_device_page ONLY */ +The MikroTik RB5009UG+S+IN is a compact multigig router based on Marvell's Armada 7040 ARM64 SoC. It comes with an SFP+ port, one 2.5 GbE port (with PoE+ in) and 7 GbE ports. It can be wall mounted or rack mounted with the [[https://mikrotik.com/product/rb5009_mount|MikroTik K-79 rackmount kit]].
-/* DO NOT CREATE NEW DEVICEPAGES VIA COPY & PASTE! */ +
-/* USE https://openwrt.org/meta/create_new_device_page */+
  
-{{page>meta:infobox:construction&noheader&nofooter&noeditbtn}}+{{:media:mikrotik:rb5009ug_s_in:mikrotik_rb5009ug_s_in.png?500|RB5009UG+S+IN}}
  
-//Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.//+<WRAP center round box important 600px> 
 +**WARNING:** 
  
-<WRAP BOX> +Support has been merged into main with commit [[commit>?p=openwrt/openwrt.git;a=commit;h=85d9fd6f0ec776d334871c052f4e15903238d9b4|85d9fd6f0ec7]]. Please follow the installation instructions in the commit message until this page has been fully updated to reflect it. 
-FIXME Any text with light background (like this one) provides instructions for creating the Details PageWhen you have filled in correct/useful information (instead of any template that's there) **remove the instructions, as well as the ''<nowiki><WRAP></nowiki>'' that encloses it.**+ 
 +**Do not sysupgrade from previous out of tree builds directly to the official OpenWrt images; the flash layout between both differs.**
 </WRAP> </WRAP>
  
-/*****/ 
-/* How to add images ========> http://openwrt.org/meta/adding_images_to_openwrt_wiki */ 
-/*****/ 
- 
-{{media:example:genericrouter1.png?200|Generic Router}} 
- 
-<WRAP BOX> 
-FIXME 
-===== Getting started with a new Device Page ===== 
-  - This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that **you have to fill it with life and information.** 
-  - There are several "fixme" tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness. 
-  - When there are no more "fixme" tags left, delete this one too, along with the ''<nowiki><WRAP></nowiki>'' that encloses it. 
- 
-===== Keep the articles modular ===== 
-  * Please include only model specific information, omit bla,bla and put everything generic into separate articles 
-  * If you have no time to write certain stuff, link to [[docs:start]] 
-  * [[docs:guide-user:base-system:start]] should lead the way, do not explain this again 
-  * DO NOT provide a complete howto here! Instead //groom// the [[docs:start|general documentation]]. 
-</WRAP> 
  
 ===== Supported Versions ===== ===== Supported Versions =====
  
-<WRAP BOX> +<!-- ToH: { 
-FIXME +  "source": "json", 
-  The tables below are automatically generated, **once the correct filters for Brand and Model are set.** +  "dom""t"
-  If the tables below show information for ''<nowiki>MikroTik RB5009UG+S+IN </nowiki>'', everything is OK and you can delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. +  "paging": false, 
-  - If the tables below contain "Nothing found", it means that either +  "rotate"true
-    - the dataentry page for MikroTik RB5009UG+S+IN  is missing. Please [[meta:create_new_dataentry_page|create a new dataentry page]] firstthen reload this page. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. +  "shownColumns": ["brand""model""version""supportedsincecommit""supportedcurrentrel""oemdevicehomepageurl""forumsearch""deviceid"]
-    - filters are not set correctly. Most common reason for "Nothing found": The dataentry does not contain a Versionbut we are filtering here for version -> Please **edit this section and adjust the filters with the proper Brand, Model and Version.** In case the dataentry does not contain a version, delete the line ''filter  : Versions~''. Just tryit's easy. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. +  "filterColumns"{"brand": "^MikroTik$", "model""^RB5009UG\\+S\\+IN$"} 
-  - If the tables still contain "Nothing found": Don't panic, calm down, take a deep breath and [[:contact|contact a wiki admin]] (tmomas) for help. +-->
-</WRAP> +
- +
----- datatable ---- +
-cols    : BrandModelVersionsSupported Current RelOEM device homepage URL_urlForum Search_search-forumsDevice Techdata_pageid +
-headers : BrandModelVersion, Current Release, OEM Info, Forum Search, Technical Data +
-align   : c,c,c,c,c,c,+
-filter  : Brand=MikroTik +
-filter  Model=RB5009UG+S+IN +
-filter  : Versions~ +
-----+
  
 /* If no unsupported functions known, comment out the following datatable or delete it. */ /* If no unsupported functions known, comment out the following datatable or delete it. */
----- datatable ---- +<!-- ToH: { 
-cols    Unsupported Functions_unsupporteds +  "source""json", 
-filter  : Brand=MikroTik +  "dom""t", 
-filter  : Model=RB5009UG+S+IN +  "paging"false, 
-filter  : Versions~ +  "shownColumns": ["unsupported_functions"], 
----- +  "filterColumns": {"brand": "^MikroTik$", "model": "^RB5009UG\\+S\\+IN$"} 
- +-->
-===== Experimental Versions ===== +
- +
-/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *  +
-   The official Table of Hardware only lists current, stable versions of OpenWrt. +
-   Use this space to describe any on-going efforts to create a newer version       * +
-   of the firmware for this device. Provide links to firmware images,              * +
-   active threads on the forum, or other sources of information.                   * +
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */+
  
-//None at this time.// 
  
 ===== Hardware Highlights ===== ===== Hardware Highlights =====
----- datatable ---- +<!-- ToH: { 
-cols    ModelVersionsCPUCPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4GHz, WLAN 5.0GHz, Ethernet 100M ports_, Ethernet Gbit ports_, ModemUSB ports_ +  "source""json", 
-header  : ModelVersion,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB +  "dom": "t", 
-align   : c,c,c,c,c,c,c,c,c,c,c,c,c +  "paging": false, 
-filter  : Brand=MikroTik +  "rotate": true
-filter  Model=RB5009UG+S+IN +  "shownColumns"["model""version""cpu""cpumhz""cpucores""flashmb""rammb""wlanhardware""ethernet100mports""ethernet1gports""ethernet2_5gports""sfp_plus_ports""modem""usbports"]
-filter  : Versions~ +  "filterColumns"{"brand": "^MikroTik$", "model""^RB5009UG\\+S\\+IN$"} 
-----+-->
  
  
Line 87: Line 49:
 /* stable release */ /* stable release */
 /* uncomment once stable release is available /* uncomment once stable release is available
----- datatable ---- +<!-- ToH: { 
-cols    ModelVersionsSupported Current RelFirmware OpenWrt Install URL_urlFirmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url +  "source""json", 
-headers ModelVersionCurrent ReleaseFirmware OpenWrt InstallFirmware OpenWrt UpgradeFirmware OEM Stock +  "dom": "t", 
-align   : c,c,c +  "paging": false, 
-filter  : Brand=MikroTik +  "rotate": true
-filter  Model=RB5009UG+S+IN +  "shownColumns"["model""version""supportedcurrentrel""firmwareopenwrtinstallurl""firmwareopenwrtupgradeurl""firmwareoemstockurl"]
-filter  Versions~ +  "filterColumns": {"brand""^MikroTik$", "model""^RB5009UG\\+S\\+IN$", "version""^$"} 
-----+-->
 */ */
  
Line 100: Line 62:
 /* snapshot */ /* snapshot */
 /* delete once stable release is available */ /* delete once stable release is available */
----- datatable ---- +<!-- ToH: { 
-cols    ModelVersionsSupported Current Rel, Firmware OpenWrt snapshot Install URL_url, Firmware OpenWrt snapshot Upgrade URL_urlFirmware OEM Stock URL_url +  "source""json", 
-headers ModelVersionCurrent ReleaseFirmware OpenWrt snapshot InstallFirmware OpenWrt snapshot UpgradeFirmware OEM Stock +  "dom": "t", 
-align   : c,c,c +  "paging": false
-filter  : Brand=MikroTik +  "shownColumns"["model""version""supportedcurrentrel""firmwareopenwrtsnapshotinstallurl""firmwareopenwrtsnapshotupgradeurl""firmwareoemstockurl"]
-filter  Model=RB5009UG+S+IN +  "filterColumns"{"brand": "^MikroTik$", "model""^RB5009UG\\+S\\+IN$", "version""^$"} 
-filter  Versions~ +-->
-----+
  
  
 -> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]] -> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]]
  
-FIXME Please add the installation procedure here.+<WRAP center round box important 600px> 
 +**WARNING:**  
 + 
 +Please read the [[:toh:mikrotik:common|Common Procedures for MikroTik RouterBoard Products]] before attempting to replace the bootloader and flash OpenWrt onto your device. 
 +</WRAP> 
 + 
 +For installation, follow the instructions in the commit that added support for the RB5009. Do *not* cross-upgrade from an existing OpenWrt build, revert to RouterOS before installing an official OpenWrt image. 
  
 ==== Flash Layout ==== ==== Flash Layout ====
-<WRAP BOX> 
-FIXME //[[:docs:techref:flash.layout#discovery_how_to_find_out|Find out flash layout]], then add the flash layout table here (copy, paste, modify the [[docs:techref:flash.layout#partitioning_of_the_flash|example]]).// 
  
-Please check out the article [[docs:techref:flash.layout|Flash layout]]. It contains examples and explanations that describe how to document the flash layout. +The RB5009UG has both a 16 MiB NOR flash chip and a 1 GiB NAND one. For now the NOR is used to store the OpenWrt kernel; rootfs and rootfs_data are stored on the NAND. The UBI device is registered as mtd0, so counting on the NOR chip starts from **mtd1**. 
-</WRAP>+ 
 +^        MikroTik RB5009UG+S+IN NOR Flash Layout           ^^^^^^^^^ 
 +^ Layer0      |                       raw NOR flash memory chip (w25q128jv [[wp>Serial Peripheral Interface Bus|spi]]0.0: w25q128jv) 16384 KiB   |||||||| 
 +^ Layer1      |            mtd9 **//first_1M//** 1024 KiB              |||||||  mtd8 **//kernel//** 15360 KiB  | 
 +^ Layer2      | mtd1 **//ATF//** 599 KiB  |  mtd2 **//backup_RouterBOOT//** 101 KiB  |  mtd3 **//hard_config//** 4 KiB  |  mtd4 **//RouterBOOT//** 64 KiB  | mtd5 **//soft_config//** 64 KiB  |  mtd6 **//DTS//** 64 KiB  |  mtd7 **//free_space//** 128 KiB  |    |  
  
 ==== OEM easy installation ==== ==== OEM easy installation ====
Line 205: Line 175:
  
 ===== Debricking ===== ===== Debricking =====
--> [[docs:guide-user:troubleshooting:generic.debrick]]+Follow the [[:toh:mikrotik:common#netboot_of_openwrt_uses_dhcpbootptftp|MikroTik netboot procedure]] documented on the wikiYou need to the hacked RouterBOOT binary to be able to boot OpenWrt (see [[https://github.com/adron-s/openwrt-rb5009#the-installation-process-for-mikrotik-rb5009=|instructions]] by adron-s).
  
 ===== Failsafe mode ===== ===== Failsafe mode =====
Line 215: Line 185:
  
 ===== Specific Configuration ===== ===== Specific Configuration =====
- +Below configuration is as configured on OpenWrt; there is no dedicated WAN portall available ports are connected to the Marvell switch. One can set any port as WAN (e.g. p8).
-<WRAP BOX> +
-FIXME Please fill in real values for this devicethen remove the EXAMPLEs+
  
 ==== Network interfaces ==== ==== Network interfaces ====
 The default network configuration is: The default network configuration is:
 ^ Interface Name   ^ Description                  ^ Default configuration    ^ ^ Interface Name   ^ Description                  ^ Default configuration    ^
-| br-lan           EXAMPLE LAN WiFi           EXAMPLE 192.168.1.1/24   | +| br-lan           Ethernet 2-8 SFP +          | 192.168.1.1/24   | 
-vlan0 (eth0.0)   | EXAMPLE LAN ports (1 to 4)   | EXAMPLE None             | +p1   | 2,5 GbE configured as WAN port  | DHCP (default)             |
-| vlan1 (eth0.1)   | EXAMPLE WAN port             EXAMPLE DHCP             | +
-| wl0              | EXAMPLE WiFi                 | EXAMPLE Disabled         | +
- +
-</WRAP> +
 ==== Switch Ports (for VLANs) ==== ==== Switch Ports (for VLANs) ====
 <WRAP BOX> <WRAP BOX>
Line 270: Line 233:
 </WRAP> </WRAP>
  
----- datatemplatelist dttpllist ---- +<!-- ToH: { 
-templatemeta:template_datatemplatelist +  "source""json", 
-cols    BrandModelVersionsDevice TypeAvailabilitySupported Since Commit_gitSupported since RelSupported current RelUnsupportedBootloaderCPUTargetCPU MHzFlash MBsRAM MBSwitchEthernet 100M ports_Ethernet Gbit ports_Comments network ports_ModemVLANWLAN 2.4GHzWLAN 5.0GHzWLAN HardwaresWLAN Comments_Detachable Antennas_USB ports_SATA ports_Comments USB SATA ports_SerialJTAGLED countButton countPower supplyDevice Techdata_pageidForum topic URL_urlwikidevi URL_urlOEM Device Homepage URL_urlFirmware OEM Stock URL_urlFirmware OpenWrt Install URL_urlFirmware OpenWrt Upgrade URL_urlComments_ +  "dom""t", 
-filter  : Brand=MikroTik +  "paging"false, 
-filter  Model=RB5009UG+S+IN +  "rotate": true, 
-filter  Versions= +  "shownColumns": ["brand""model""version""devicetype""availability""supportedsincecommit""supportedsincerel""supportedcurrentrel""unsupported_functions""bootloader""cpu""target""cpumhz""flashmb""rammb""switch""ethernet100mports""ethernet1gports""commentsnetworkports""modem""vlan""wlan24ghz""wlan50ghz""wlanhardware""wlancomments""detachableantennas""usbports""sataports""commentsusbsataports""serial""jtag""ledcount""buttoncount""powersupply""deviceid""owrt_forum_topic_url""wikideviurl""oemdevicehomepageurl""firmwareoemstockurl", "firmwareopenwrtinstallurl", "firmwareopenwrtupgradeurl", "comments"]
-----+  "filterColumns"{"brand": "^MikroTik$", "model""^RB5009UG\\+S\\+IN$", "version""^$"} 
 +-->
  
 ==== Photos ==== ==== Photos ====
Line 284: Line 248:
 /* Thanks, your wiki administration - Oct. 2015 */ /* Thanks, your wiki administration - Oct. 2015 */
  
-//Front://\\ +**Top View of PCB**
-**Insert photo of front of the casing**+
  
-//Back://\\+{{:media:mikrotik:rb5009ug_s_in:rb5009_s_in_top.jpg?400|}} 
 + 
 +**Bottom View of PCB** 
 + 
 +{{:media:mikrotik:rb5009ug_s_in:rb5009_s_in_bottom.jpg?400|}} 
 +*Back://\\ 
 **Insert photo of back of the casing** **Insert photo of back of the casing**
  
Line 308: Line 276:
 -> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc. -> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc.
  
-How to connect to the Serial Port of this specific device:\\ +There is a MikroTik 16 pin header they commonly use and the pinout is:
-**Insert photo of PCB with markings for serial port**+
  
-<WRAP BOX+<code
-FIXME //Replace EXAMPLE by real values.// +1   GND Vcc  RX  ?  GND 
-</WRAP>+   #--------------------# 
 +   |.-. .-. .-. .-. .-. | 
 +   |'-' '-' '-' '-' '-'
 +   |.-. .-. .-. .-. .-. | 
 +   |'-' '-' '-' '-' '-'
 +   #--------------------# 
 +2   CLK  DO /CS  TX  DI 
 +</code>
  
-^ Serial connection parameters\\ for MikroTik RB5009UG+S+IN @@Version@@ | EXAMPLE 115200, 8N1 |+^ Serial connection parameters\\ for MikroTik RB5009UG+S+IN @@Version@@ | 115200,8N1 |
  
 ==== JTAG ==== ==== JTAG ====
Line 326: Line 300:
 -> [[docs:techref:bootloader]] -> [[docs:techref:bootloader]]
  
 +Use adron-s's hacked RouterBOOT (see [[:toh:mikrotik:rb5009ug_s_in#installation_instructions_with_modified_routerboot|installation section]]) to boot OpenWrt images. The default RouterBOOT only supports MikroTik's own images.
 ===== Hardware mods ===== ===== Hardware mods =====
  
Line 339: Line 314:
 ==== OpenWrt bootlog ==== ==== OpenWrt bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</nowiki>+[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd081] 
 +[    0.000000] Linux version 5.10.118 (5800x@crunchbot) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r19160+20-7ea2f3d6e2) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Thu May 26 10:38:36 2022 
 +[    0.000000] Machine model: MikroTik RB5009 
 +[    0.000000] Zone ranges: 
 +[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff] 
 +[    0.000000]   DMA32    empty 
 +[    0.000000]   Normal   empty 
 +[    0.000000] Movable zone start for each node 
 +[    0.000000] Early memory node ranges 
 +[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff] 
 +[    0.000000]   node   0: [mem 0x0000000004000000-0x00000000041fffff] 
 +[    0.000000]   node   0: [mem 0x0000000004200000-0x000000003fffffff] 
 +[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffffff] 
 +[    0.000000] On node 0 totalpages: 262144 
 +[    0.000000]   DMA zone: 4096 pages used for memmap 
 +[    0.000000]   DMA zone: 0 pages reserved 
 +[    0.000000]   DMA zone: 262144 pages, LIFO batch:63 
 +[    0.000000] psci: probing for conduit method from DT. 
 +[    0.000000] psci: PSCIv1.1 detected in firmware. 
 +[    0.000000] psci: Using standard PSCI v0.2 function IDs 
 +[    0.000000] psci: Trusted OS resident on physical CPU 0x0 
 +[    0.000000] psci: SMC Calling Convention v1.1 
 +[    0.000000] percpu: Embedded 16 pages/cpu s27608 r8192 d29736 u65536 
 +[    0.000000] pcpu-alloc: s27608 r8192 d29736 u65536 alloc=16*4096 
 +[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3  
 +[    0.000000] Detected PIPT I-cache on CPU0 
 +[    0.000000] CPU features: detected: Spectre-v2 
 +[    0.000000] CPU features: detected: Spectre-BHB 
 +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 258048 
 +[    0.000000] Kernel command line:  
 +[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) 
 +[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) 
 +[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off 
 +[    0.000000] Memory: 1017160K/1048576K available (7998K kernel code, 900K rwdata, 1312K rodata, 448K init, 272K bss, 31416K reserved, 0K cma-reserved) 
 +[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 
 +[    0.000000] rcu: Hierarchical RCU implementation. 
 +[    0.000000] Tracing variant of Tasks RCU enabled. 
 +[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. 
 +[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 
 +[    0.000000] GIC: Adjusting CPU interface base to 0x00000000f022f000 
 +[    0.000000] GIC: Using split EOI/Deactivate mode 
 +[    0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:160, num:32) 
 +[    0.000000] GICv2m: range[mem 0xf0280000-0xf0280fff], SPI[160:191] 
 +[    0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:192, num:32) 
 +[    0.000000] GICv2m: range[mem 0xf0290000-0xf0290fff], SPI[192:223] 
 +[    0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:224, num:32) 
 +[    0.000000] GICv2m: range[mem 0xf02a0000-0xf02a0fff], SPI[224:255] 
 +[    0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:256, num:32) 
 +[    0.000000] GICv2m: range[mem 0xf02b0000-0xf02b0fff], SPI[256:287] 
 +[    0.000000] random: get_random_bytes called from 0xffffffc010920cac with crng_init=0 
 +[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys). 
 +[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns 
 +[    0.000003] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns 
 +[    0.000079] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) 
 +[    0.000087] pid_max: default: 32768 minimum: 301 
 +[    0.000153] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) 
 +[    0.000165] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) 
 +[    0.000894] rcu: Hierarchical SRCU implementation. 
 +[    0.000960] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build 
 +[    0.001133] smp: Bringing up secondary CPUs ... 
 +[    0.001462] Detected PIPT I-cache on CPU1 
 +[    0.001501] CPU1: Booted secondary processor 0x0000000001 [0x410fd081] 
 +[    0.001854] Detected PIPT I-cache on CPU2 
 +[    0.001885] CPU2: Booted secondary processor 0x0000000100 [0x410fd081] 
 +[    0.002245] Detected PIPT I-cache on CPU3 
 +[    0.002266] CPU3: Booted secondary processor 0x0000000101 [0x410fd081] 
 +[    0.002310] smp: Brought up 1 node, 4 CPUs 
 +[    0.002322] SMP: Total of 4 processors activated. 
 +[    0.002327] CPU features: detected: 32-bit EL0 Support 
 +[    0.002332] CPU features: detected: CRC32 instructions 
 +[    0.002367] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching 
 +[    0.002372] CPU: All CPU(s) started at EL2 
 +[    0.002388] alternatives: patching kernel code 
 +[    0.004432] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 
 +[    0.004444] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) 
 +[    0.004523] pinctrl core: initialized pinctrl subsystem 
 +[    0.004835] NET: Registered protocol family 16 
 +[    0.005281] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations 
 +[    0.005318] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations 
 +[    0.005353] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations 
 +[    0.005556] thermal_sys: Registered thermal governor 'step_wise' 
 +[    0.006000] cpuidle: using governor ladder 
 +[    0.006024] ASID allocator initialised with 65536 entries 
 +[    0.015545] cryptd: max_cpu_qlen set to 1000 
 +[    0.016691] SCSI subsystem initialized 
 +[    0.016806] libata version 3.00 loaded. 
 +[    0.016898] usbcore: registered new interface driver usbfs 
 +[    0.016920] usbcore: registered new interface driver hub 
 +[    0.016943] usbcore: registered new device driver usb 
 +[    0.017539] clocksource: Switched to clocksource arch_sys_counter 
 +[    0.017858] NET: Registered protocol family 2 
 +[    0.017995] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) 
 +[    0.018411] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) 
 +[    0.018426] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) 
 +[    0.018468] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) 
 +[    0.018554] TCP: Hash tables configured (established 8192 bind 8192) 
 +[    0.018653] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) 
 +[    0.018672] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) 
 +[    0.018743] NET: Registered protocol family 1 
 +[    0.018760] PCI: CLS 0 bytes, default 64 
 +[    0.020798] workingset: timestamp_bits=46 max_order=18 bucket_order=0 
 +[    0.022530] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +[    0.022536] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +[    0.026214] armada-ap806-pinctrl f06f4000.system-controller:pinctrl: registered pinctrl driver 
 +[    0.026613] armada-cp110-pinctrl f2440000.system-controller:pinctrl: registered pinctrl driver 
 +[    0.027305] gpio-87 (enable USB power): hogged as output/high 
 +[    0.027320] gpio-91 (enable LED-s power): hogged as output/high 
 +[    0.029065] mv_xor_v2 f0400000.xor: Marvell Version 2 XOR driver 
 +[    0.029588] mv_xor_v2 f0420000.xor: Marvell Version 2 XOR driver 
 +[    0.030103] mv_xor_v2 f0440000.xor: Marvell Version 2 XOR driver 
 +[    0.030612] mv_xor_v2 f0460000.xor: Marvell Version 2 XOR driver 
 +[    0.031172] mv_xor_v2 f26a0000.xor: Marvell Version 2 XOR driver 
 +[    0.031692] mv_xor_v2 f26c0000.xor: Marvell Version 2 XOR driver 
 +[    0.031833] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled 
 +[    0.032257] printk: console [ttyS0] disabled 
 +[    0.052418] f0512000.serial: ttyS0 at MMIO 0xf0512000 (irq = 17, base_baud = 12500000) is a 16550A 
 +[    0.721676] printk: console [ttyS0] enabled 
 +[    0.726477] omap_rng f2760000.trng: Random Number Generator ver. 203b34c 
 +[    0.726793] random: fast init done 
 +[    0.736652] random: crng init done 
 +[    0.741651] loop: module loaded 
 +[    0.746024] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xd3 
 +[    0.752417] nand: Macronix MX60LF8G18AC 
 +[    0.756269] nand: 1024 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 
 +[    0.764465] Bad block table found at page 524224, version 0x01 
 +[    0.771201] Bad block table found at page 524160, version 0x01 
 +[    0.777494] nand_read_bbt: bad block at 0x000002a60000 
 +[    0.782668] nand_read_bbt: bad block at 0x000019b80000 
 +[    0.787835] nand_read_bbt: bad block at 0x000024ea0000 
 +[    0.792997] nand_read_bbt: bad block at 0x00002aac0000 
 +[    0.798301] 1 fixed-partitions partitions found on MTD device f2720000.nand 
 +[    0.805291] Creating 1 MTD partitions on "f2720000.nand": 
 +[    0.810722] 0x000000000000-0x000040000000 : "ubi" 
 +[    0.818604] spi-nor spi0.0: w25q128jv (16384 Kbytes) 
 +[    0.823704] 9 fixed-partitions partitions found on MTD device spi0.0 
 +[    0.830091] Creating 9 MTD partitions on "spi0.0": 
 +[    0.834902] 0x000000000000-0x000000095c04 : "ATF" 
 +[    0.839805] 0x000000095c04-0x0000000af000 : "backup_RouterBOOT" 
 +[    0.845886] 0x0000000af000-0x0000000b0000 : "hard_config" 
 +[    0.851463] 0x0000000b0000-0x0000000c0000 : "RouterBOOT" 
 +[    0.856932] 0x0000000c0000-0x0000000d0000 : "soft_config" 
 +[    0.862493] 0x0000000d0000-0x0000000e0000 : "DTS" 
 +[    0.867363] 0x0000000e0000-0x000000100000 : "free_space" 
 +[    0.872856] 0x000000100000-0x000001000000 : "kernel" 
 +[    0.877988] 0x000000000000-0x000000100000 : "first_1M" 
 +[    0.886748] mv88e6085 f212a200.mdio-mii:00: switch 0x3930 detected: Marvell 88E6393X, revision 0 
 +[    0.908910] hwmon hwmon0: temp1_input not attached to any thermal zone 
 +[    0.948090] hwmon hwmon1: temp1_input not attached to any thermal zone 
 +[    0.987354] hwmon hwmon2: temp1_input not attached to any thermal zone 
 +[    1.025814] hwmon hwmon3: temp1_input not attached to any thermal zone 
 +[    1.065077] hwmon hwmon4: temp1_input not attached to any thermal zone 
 +[    1.103552] hwmon hwmon5: temp1_input not attached to any thermal zone 
 +[    1.143531] hwmon hwmon6: temp1_input not attached to any thermal zone 
 +[    1.199104] mvpp2 f2000000.ethernet: using 8 per-cpu buffers 
 +[    1.219281] mvpp2 f2000000.ethernet eth0: Using dtb mac address dc:2c:6e:45:cf:71 
 +[    1.237252] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 
 +[    1.243826] ehci-pci: EHCI PCI platform driver 
 +[    1.248320] ehci-platform: EHCI generic platform driver 
 +[    1.253651] ehci-orion: EHCI orion driver 
 +[    1.257966] xhci-hcd f2510000.usb3: xHCI Host Controller 
 +[    1.263310] xhci-hcd f2510000.usb3: new USB bus registered, assigned bus number 1 
 +[    1.270897] xhci-hcd f2510000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010 
 +[    1.280189] xhci-hcd f2510000.usb3: irq 40, io mem 0xf2510000 
 +[    1.286340] hub 1-0:1.0: USB hub found 
 +[    1.290131] hub 1-0:1.0: 1 port detected 
 +[    1.294169] xhci-hcd f2510000.usb3: xHCI Host Controller 
 +[    1.299547] xhci-hcd f2510000.usb3: new USB bus registered, assigned bus number 2 
 +[    1.307065] xhci-hcd f2510000.usb3: Host supports USB 3.0 SuperSpeed 
 +[    1.313475] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. 
 +[    1.321774] hub 2-0:1.0: USB hub found 
 +[    1.325551] hub 2-0:1.0: 1 port detected 
 +[    1.329729] usbcore: registered new interface driver usb-storage 
 +[    1.335997] armada38x-rtc f2284000.rtc: registered as rtc0 
 +[    1.341530] armada38x-rtc f2284000.rtc: setting system clock to 2022-05-29T17:51:51 UTC (1653846711) 
 +[    1.350757] i2c /dev entries driver 
 +[    1.367905] sbsa-gwdt f0610000.watchdog: Initialized with 10s timeout @ 25000000 Hz, action=0. [enabled] 
 +[    1.378118] sdhci: Secure Digital Host Controller Interface driver 
 +[    1.384330] sdhci: Copyright(c) Pierre Ossman 
 +[    1.388928] sdhci-pltfm: SDHCI platform and OF driver helper 
 +[    1.409499] MikroTik RouterBOARD hardware configuration sysfs driver v0.07 
 +[    1.429700] MikroTik RouterBOARD software configuration sysfs driver v0.05 
 +[    1.437479] NET: Registered protocol family 10 
 +[    1.442844] Segment Routing with IPv6 
 +[    1.446553] NET: Registered protocol family 17 
 +[    1.451158] 8021q: 802.1Q VLAN Support v1.8 
 +[    1.458282] mv88e6085 f212a200.mdio-mii:00: switch 0x3930 detected: Marvell 88E6393X, revision 0 
 +[    1.483854] hwmon hwmon0: temp1_input not attached to any thermal zone 
 +[    1.520856] hwmon hwmon1: temp1_input not attached to any thermal zone 
 +[    1.560104] hwmon hwmon2: temp1_input not attached to any thermal zone 
 +[    1.598619] hwmon hwmon3: temp1_input not attached to any thermal zone 
 +[    1.636638] hwmon hwmon4: temp1_input not attached to any thermal zone 
 +[    1.674213] hwmon hwmon5: temp1_input not attached to any thermal zone 
 +[    1.713125] hwmon hwmon6: temp1_input not attached to any thermal zone 
 +[    2.286862] mvpp2 f2000000.ethernet: all ports have a low MTU, switching to per-cpu buffers 
 +[    2.345512] mvpp2 f2000000.ethernet: using 8 per-cpu buffers 
 +[    2.459415] mv88e6085 f212a200.mdio-mii:00 p8 (uninitialized): PHY [!cp0!config-space@f2000000!mdio@12a200!switch@0!mdio:01] driver [Marvell 88E6393 Family] (irq=55) 
 +[    2.579416] mv88e6085 f212a200.mdio-mii:00 p7 (uninitialized): PHY [!cp0!config-space@f2000000!mdio@12a200!switch@0!mdio:02] driver [Marvell 88E6393 Family] (irq=56) 
 +[    2.699396] mv88e6085 f212a200.mdio-mii:00 p6 (uninitialized): PHY [!cp0!config-space@f2000000!mdio@12a200!switch@0!mdio:03] driver [Marvell 88E6393 Family] (irq=57) 
 +[    2.819393] mv88e6085 f212a200.mdio-mii:00 p5 (uninitialized): PHY [!cp0!config-space@f2000000!mdio@12a200!switch@0!mdio:04] driver [Marvell 88E6393 Family] (irq=58) 
 +[    2.939393] mv88e6085 f212a200.mdio-mii:00 p4 (uninitialized): PHY [!cp0!config-space@f2000000!mdio@12a200!switch@0!mdio:05] driver [Marvell 88E6393 Family] (irq=59) 
 +[    3.059411] mv88e6085 f212a200.mdio-mii:00 p3 (uninitialized): PHY [!cp0!config-space@f2000000!mdio@12a200!switch@0!mdio:06] driver [Marvell 88E6393 Family] (irq=60) 
 +[    3.179397] mv88e6085 f212a200.mdio-mii:00 p2 (uninitialized): PHY [!cp0!config-space@f2000000!mdio@12a200!switch@0!mdio:07] driver [Marvell 88E6393 Family] (irq=61) 
 +[    3.486023] mv88e6085 f212a200.mdio-mii:00 p1 (uninitialized): PHY [!cp0!config-space@f2000000!mdio@12a200!switch@0!mdio1:00] driver [Qualcomm QCA8081] (irq=POLL) 
 +[    3.502789] DSA: tree 0 setup 
 +[    3.507205] UBI: auto-attach mtd0 
 +[    3.510568] ubi0: attaching mtd0 
 +[   10.950134] ubi0: scanning is finished 
 +[   10.967781] ubi0: attached mtd0 (name "ubi", size 1024 MiB) 
 +[   10.973382] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes 
 +[   10.980295] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 
 +[   10.987111] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 
 +[   10.994106] ubi0: good PEBs: 8180, bad PEBs: 12, corrupted PEBs: 0 
 +[   11.000320] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 
 +[   11.007578] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 507293880 
 +[   11.016662] ubi0: available PEBs: 0, total reserved PEBs: 8180, PEBs reserved for bad PEB handling: 148 
 +[   11.026108] ubi0: background thread "ubi_bgt0d" started, PID 915 
 +[   11.026874] block ubiblock0_0: created from ubi0:0(rootfs) 
 +[   11.037669] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem 
 +[   11.048723] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. 
 +[   11.056090] Freeing unused kernel memory: 448K 
 +[   11.117723] Run /sbin/init as init process 
 +[   11.121848]   with arguments: 
 +[   11.121857]     /sbin/init 
 +[   11.121864]   with environment: 
 +[   11.121872]     HOME=/ 
 +[   11.121879]     TERM=linux 
 +[   11.388337] init: Console is alive 
 +[   11.391839] init: - watchdog - 
 +[   11.650055] kmodloader: loading kernel modules from /etc/modules-boot.d/
 +[   11.710786] ehci-fsl: Freescale EHCI Host controller driver 
 +[   11.716947] kmodloader: done loading kernel modules from /etc/modules-boot.d/
 +[   11.728281] init: - preinit - 
 +[   12.275546] mvpp2 f2000000.ethernet eth0: configuring for inband/10gbase-r link mode 
 +[   12.284810] mv88e6085 f212a200.mdio-mii:00 p2: configuring for phy/ link mode 
 +[   12.295174] 8021q: adding VLAN 0 to HW filter on device p2 
 +[   12.331417] mvpp2 f2000000.ethernet eth0: Link is Up - 10Gbps/Full - flow control off 
 +[   12.340711] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 
 +[   15.262078] mv88e6085 f212a200.mdio-mii:00 p2: Link is Up - 1Gbps/Full - flow control rx/tx 
 +[   15.270529] IPv6: ADDRCONF(NETDEV_CHANGE): p2: link becomes ready 
 +[   16.449537] UBIFS (ubi0:1): Mounting in unauthenticated mode 
 +[   16.455347] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 1006 
 +[   16.512595] UBIFS (ubi0:1): recovery needed 
 +[   16.650329] UBIFS (ubi0:1): recovery completed 
 +[   16.654841] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" 
 +[   16.662716] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes 
 +[   16.672681] UBIFS (ubi0:1): FS size: 1010094080 bytes (963 MiB, 7955 LEBs), journal size 33521664 bytes (31 MiB, 264 LEBs) 
 +[   16.683775] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB) 
 +[   16.690423] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 7A2EA4F9-3FB1-4552-8605-2D4FADC1BB0E, small LPT model 
 +[   16.706870] mount_root: switching to ubifs overlay 
 +[   16.717470] overlayfs: "xino" feature enabled using 2 upper inode bits. 
 +[   16.737155] urandom-seed: Seeding with /etc/urandom.seed 
 +[   16.864878] mv88e6085 f212a200.mdio-mii:00 p2: Link is Down 
 +[   16.877294] procd: - early - 
 +[   16.880348] procd: - watchdog - 
 +[   17.434980] procd: - watchdog - 
 +[   17.440867] procd: - ubus - 
 +[   17.503437] procd: - init - 
 +[   17.780246] urngd: v1.0.2 started. 
 +[   17.799280] kmodloader: loading kernel modules from /etc/modules.d/
 +[   17.875416] i2c-gpio sfp-i2c: using lines 32 (SDA) and 33 (SCL) 
 +[   17.881792] sfp sfp: Host maximum power 1.0W 
 +[   17.912207] xt_time: kernel timezone is -0000 
 +[   17.928207] PPP generic driver version 2.4.2 
 +[   17.933269] NET: Registered protocol family 24 
 +[   17.938908] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. 
 +[   17.946773] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. 
 +[   17.961213] kmodloader: done loading kernel modules from /etc/modules.d/
 +[   21.103050] mvpp2 f2000000.ethernet eth0: Link is Down 
 +[   21.120545] mvpp2 f2000000.ethernet eth0: configuring for inband/10gbase-r link mode 
 +[   21.159931] mv88e6085 f212a200.mdio-mii:00 p1: configuring for inband/sgmii link mode 
 +[   21.212404] mvpp2 f2000000.ethernet eth0: Link is Up - 10Gbps/Full - flow control off 
 +[   21.249251] 8021q: adding VLAN 0 to HW filter on device p1 
 +[   21.273560] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 
 +[   21.341983] br-lan: port 1(p1) entered blocking state 
 +[   21.347095] br-lan: port 1(p1) entered disabled state 
 +[   21.371425] device p1 entered promiscuous mode 
 +[   21.375894] device eth0 entered promiscuous mode 
 +[   21.464799] mv88e6085 f212a200.mdio-mii:00 p2: configuring for phy/ link mode 
 +[   21.476985] 8021q: adding VLAN 0 to HW filter on device p2 
 +[   21.482842] br-lan: port 2(p2) entered blocking state 
 +[   21.488025] br-lan: port 2(p2) entered disabled state 
 +[   21.493670] device p2 entered promiscuous mode 
 +[   21.513320] mv88e6085 f212a200.mdio-mii:00 p3: configuring for phy/ link mode 
 +[   21.527931] 8021q: adding VLAN 0 to HW filter on device p3 
 +[   21.624039] br-lan: port 3(p3) entered blocking state 
 +[   21.629145] br-lan: port 3(p3) entered disabled state 
 +[   21.648003] device p3 entered promiscuous mode 
 +[   21.660187] mv88e6085 f212a200.mdio-mii:00 p4: configuring for phy/ link mode 
 +[   21.670085] 8021q: adding VLAN 0 to HW filter on device p4 
 +[   21.737758] br-lan: port 4(p4) entered blocking state 
 +[   21.742854] br-lan: port 4(p4) entered disabled state 
 +[   21.749307] device p4 entered promiscuous mode 
 +[   21.772049] mv88e6085 f212a200.mdio-mii:00 p5: configuring for phy/ link mode 
 +[   21.781947] 8021q: adding VLAN 0 to HW filter on device p5 
 +[   21.837756] br-lan: port 5(p5) entered blocking state 
 +[   21.842850] br-lan: port 5(p5) entered disabled state 
 +[   21.849204] device p5 entered promiscuous mode 
 +[   21.871689] mv88e6085 f212a200.mdio-mii:00 p6: configuring for phy/ link mode 
 +[   21.881363] 8021q: adding VLAN 0 to HW filter on device p6 
 +[   21.937769] br-lan: port 6(p6) entered blocking state 
 +[   21.942862] br-lan: port 6(p6) entered disabled state 
 +[   21.949308] device p6 entered promiscuous mode 
 +[   21.971964] mv88e6085 f212a200.mdio-mii:00 p7: configuring for phy/ link mode 
 +[   21.981833] 8021q: adding VLAN 0 to HW filter on device p7 
 +[   22.034163] br-lan: port 7(p7) entered blocking state 
 +[   22.039278] br-lan: port 7(p7) entered disabled state 
 +[   22.045773] device p7 entered promiscuous mode 
 +[   22.104722] mv88e6085 f212a200.mdio-mii:00 sfp: configuring for inband/10gbase-r link mode 
 +[   22.236017] 8021q: adding VLAN 0 to HW filter on device sfp 
 +[   22.246689] br-lan: port 8(sfp) entered blocking state 
 +[   22.251972] br-lan: port 8(sfp) entered disabled state 
 +[   22.258657] device sfp entered promiscuous mode 
 +[   22.284734] mv88e6085 f212a200.mdio-mii:00 p8: configuring for phy/ link mode 
 +[   22.294658] 8021q: adding VLAN 0 to HW filter on device p8 
 +[   24.652106] mv88e6085 f212a200.mdio-mii:00 p2: Link is Up - 1Gbps/Full - flow control rx/tx 
 +[   24.660581] br-lan: port 2(p2) entered blocking state 
 +[   24.665676] br-lan: port 2(p2) entered forwarding state 
 +[   24.671747] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready 
 +[   25.202107] mv88e6085 f212a200.mdio-mii:00 p8: Link is Up - 1Gbps/Full - flow control rx/tx
 </WRAP>\\ </WRAP>\\
  
Line 348: Line 641:
  
 ===== Tags ===== ===== Tags =====
-<WRAP BOX> 
-FIXME //Add tags below, then remove this fixme.// 
-</WRAP> 
- 
 [[meta:tags|How to add tags]] [[meta:tags|How to add tags]]
-{{tag>EXAMPLETAG}}+{{tag>mvebu armada7040 1024NAND 1024RAM 9port gigabitethernet 2.5gigabitethernet 4core 16flash PoE sfp_plus usb3.0 armv8 cortexa72 rackmount wip}}
  • Last modified: 2024/10/02 18:43
  • by jannoke