Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revisionBoth sides next revision
toh:mikrotik:mikrotik_routerboard_rb493 [2019/02/03 08:43] – datatable filters adjusted tmomastoh:mikrotik:rb493 [2021/04/17 13:31] – ↷ Page name changed from toh:mikrotik:mikrotik_routerboard_rb493 to toh:mikrotik:rb493 tmomas
Line 141: Line 141:
  
 ''sysupgrade'' does not support this router.  It may be possible to upgrade using the wget2nand script, but I have not tested this method. ''sysupgrade'' does not support this router.  It may be possible to upgrade using the wget2nand script, but I have not tested this method.
- 
  
  
Line 157: Line 156:
  
 ===== Specific Configuration ===== ===== Specific Configuration =====
- 
  
 ==== Network interfaces ==== ==== Network interfaces ====
 The default network configuration should be (see below for corrected configuration file): The default network configuration should be (see below for corrected configuration file):
-^ Interface Name   ^ Description                  ^ Default configuration    ^ 
-| br-lan(eth1)     | LAN & WiFi           | 192.168.1.1/24   | 
-| vlan1 (eth1  )   | LAN ports (ETH2 to ETH9)   | 192.168.1.1/24   | 
-| eth0             | WAN port  (ETH1)           | DHCP             | 
-| wl0              | EXAMPLE WiFi               | Disabled         | 
- 
  
 +^ Interface Name   ^ Description                ^ Default configuration   ^
 +| br-lan(eth1)     | LAN & WiFi                 | 192.168.1.1/24          |
 +| vlan1 (eth1  )   | LAN ports (ETH2 to ETH9)   | 192.168.1.1/24          |
 +| eth0             | WAN port  (ETH1)           | DHCP                    |
 +| wl0              | EXAMPLE WiFi               | Disabled                |
  
 ==== Switch Ports (for VLANs) ==== ==== Switch Ports (for VLANs) ====
Line 174: Line 171:
  
 The default switch configuration should be: The default switch configuration should be:
-^ Board      ^Port   ^ VLAN   ^ Interface   ^ + 
-| Eth1                          eth0     +^ Board   ^ Port   ^ VLAN   ^ Interface   ^ 
-| Eth2       |      |      |    eth1     | +| Eth1            eth0  
-| Eth3       |      |      |    eth1     | +| Eth2    |      |      |    eth1     | 
-| Eth4       |      |      |    eth1     | +| Eth3    |      |      |    eth1     | 
-| Eth5       |      |      |    eth1     | +| Eth4    |      |      |    eth1     | 
-| Eth6       |      |      |    eth1     | +| Eth5    |      |      |    eth1     | 
-| Eth7       |      |      |    eth1     | +| Eth6    |      |      |    eth1     | 
-| Eth8       |      |      |    eth1     | +| Eth7    |      |      |    eth1     | 
-| Eth9       |      |      |    eth1     | +| Eth8    |      |      |    eth1     | 
-| CPU        |      |      |    eth1     |+| Eth9    |      |      |    eth1     | 
 +| CPU     |      |      |    eth1     |
  
 === ''/etc/config/network'' to enable above configuration === === ''/etc/config/network'' to enable above configuration ===
Line 228: Line 226:
 ===== Hardware ===== ===== Hardware =====
 ==== Info ==== ==== Info ====
-| **[[wp>Instruction set|Architecture]]:**  | [[wp>MIPS architecture|MIPS]]-BE                    +[[wp>Instruction set|Architecture]]   | [[wp>MIPS architecture|MIPS]]-BE   
-| **Vendor:**                               | [[wp>Mikrotik]] / [[wp>Atheros]]           +Vendor                                | [[wp>Mikrotik]] / [[wp>Atheros]]   
-| **[[docs:techref:bootloader]]:**           | MikroTik RouterBoot (Rescue- and Main-Bootloader)   | +[[docs:techref:bootloader]]           | MikroTik RouterBoot (Rescue- and Main-Bootloader)   | 
-| **Default Operating System:**             | MikroTik RouterOS v4, Level5-license                | +Default Operating System              | MikroTik RouterOS v4, Level5-license                | 
-| **[[docs:techref:hardware:soc|System-On-Chip]]:**  | Atheros AR7130 | +[[docs:techref:hardware:soc|System-On-Chip]]   | Atheros AR7130    
-| **[[docs:techref:hardware:cpu|CPU]]/Speed**        | MIPS 24Kc 300 Mhz +[[docs:techref:hardware:cpu|CPU]]/Speed        | MIPS 24Kc 300 MHz 
-| **Flash-Chip:**  | [[Samsung NAND 64MiB 3,3V 8-bit]] +Flash-Chip   | [[Samsung NAND 64MiB 3,3V 8-bit]] 
-| **Flash size:**  | 64 MiB NAND-Flash                 +Flash size   | 64 MiB NAND-Flash                  
-| **RAM:**         | 64 MiB DDR-SDRAM                  +RAM          | 64 MiB DDR-SDRAM                   
-| **Wireless:**    | optional via 3x Mini-PCI IIIA/   | +Wireless     | optional via 3x Mini-PCI IIIA/   | 
-| **Ethernet:**    | 9x 10/100Base-T(X) (IC+ IP178C 8-port-switch with VLAN support [[docs:techref:swconfig]] | +Ethernet     | 9x 10/100Base-T(X) (IC+ IP178C 8-port-switch with VLAN support [[docs:techref:swconfig]] | 
-| **Internet:**    | n/a/xDSL/DOCSIS/3g/LTE   | +Internet     | n/a/xDSL/DOCSIS/3g/LTE   | 
-| **USB:**         | none      +USB          | none   
-| **[[docs:techref:hardware:port.serial|Serial]]:**   | [[#Serial|YES 1x Sub-DB9 RS-232C asynchronous]]   | +[[docs:techref:hardware:port.serial|Serial]]   | [[#Serial|YES 1x Sub-DB9 RS-232C asynchronous]]   | 
-| **[[docs:techref:hardware:port.jtag|JTAG]]:**       | [[#JTAG|Maybe]] (contacts on PCB, not tested)     | +[[docs:techref:hardware:port.jtag|JTAG]]       | [[#JTAG|Maybe]] (contacts on PCB, not tested)     | 
-| **LED:**             | Power, NAND activity, 5x user LED              | +LED               | Power, NAND activity, 5x user LED              | 
-| **Power options:**   | 10..28 VDC Power-over-Ethernet or Power-Jack   | +Power options     | 10..28 VDC Power-over-Ethernet or Power-Jack   | 
-| **Power consumption: ** | ~3 Watt, up to 10 Watt for MiniPCI-cards, maximum 16 Watt | +Power consumption | ~3 Watt, up to 10 Watt for MiniPCI-cards, maximum 16 Watt | 
-| **Dimensions:** | 160 mm x 105 mm, 189 grams |+Dimensions  | 160 mm x 105 mm, 189 grams |
  
 ==== Photos ==== ==== Photos ====
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1