Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revisionBoth sides next revision
toh:mikrotik:mikrotik_routerboard_rb493 [2019/02/03 08:43] – datatable filters adjusted tmomastoh:mikrotik:mikrotik_routerboard_rb493 [2019/10/13 16:51] – [Info] common format for hardware info applied tmomas
Line 141: Line 141:
  
 ''sysupgrade'' does not support this router.  It may be possible to upgrade using the wget2nand script, but I have not tested this method. ''sysupgrade'' does not support this router.  It may be possible to upgrade using the wget2nand script, but I have not tested this method.
- 
  
  
Line 157: Line 156:
  
 ===== Specific Configuration ===== ===== Specific Configuration =====
- 
  
 ==== Network interfaces ==== ==== Network interfaces ====
 The default network configuration should be (see below for corrected configuration file): The default network configuration should be (see below for corrected configuration file):
-^ Interface Name   ^ Description                  ^ Default configuration    ^ 
-| br-lan(eth1)     | LAN & WiFi           | 192.168.1.1/24   | 
-| vlan1 (eth1  )   | LAN ports (ETH2 to ETH9)   | 192.168.1.1/24   | 
-| eth0             | WAN port  (ETH1)           | DHCP             | 
-| wl0              | EXAMPLE WiFi               | Disabled         | 
- 
  
 +^ Interface Name   ^ Description                ^ Default configuration   ^
 +| br-lan(eth1)     | LAN & WiFi                 | 192.168.1.1/24          |
 +| vlan1 (eth1  )   | LAN ports (ETH2 to ETH9)   | 192.168.1.1/24          |
 +| eth0             | WAN port  (ETH1)           | DHCP                    |
 +| wl0              | EXAMPLE WiFi               | Disabled                |
  
 ==== Switch Ports (for VLANs) ==== ==== Switch Ports (for VLANs) ====
Line 174: Line 171:
  
 The default switch configuration should be: The default switch configuration should be:
-^ Board      ^Port   ^ VLAN   ^ Interface   ^ + 
-| Eth1                          eth0     +^ Board   ^ Port   ^ VLAN   ^ Interface   ^ 
-| Eth2       |      |      |    eth1     | +| Eth1            eth0  
-| Eth3       |      |      |    eth1     | +| Eth2    |      |      |    eth1     | 
-| Eth4       |      |      |    eth1     | +| Eth3    |      |      |    eth1     | 
-| Eth5       |      |      |    eth1     | +| Eth4    |      |      |    eth1     | 
-| Eth6       |      |      |    eth1     | +| Eth5    |      |      |    eth1     | 
-| Eth7       |      |      |    eth1     | +| Eth6    |      |      |    eth1     | 
-| Eth8       |      |      |    eth1     | +| Eth7    |      |      |    eth1     | 
-| Eth9       |      |      |    eth1     | +| Eth8    |      |      |    eth1     | 
-| CPU        |      |      |    eth1     |+| Eth9    |      |      |    eth1     | 
 +| CPU     |      |      |    eth1     |
  
 === ''/etc/config/network'' to enable above configuration === === ''/etc/config/network'' to enable above configuration ===
Line 228: Line 226:
 ===== Hardware ===== ===== Hardware =====
 ==== Info ==== ==== Info ====
-| **[[wp>Instruction set|Architecture]]:**  | [[wp>MIPS architecture|MIPS]]-BE                    +[[wp>Instruction set|Architecture]]   | [[wp>MIPS architecture|MIPS]]-BE   
-| **Vendor:**                               | [[wp>Mikrotik]] / [[wp>Atheros]]           +Vendor                                | [[wp>Mikrotik]] / [[wp>Atheros]]   
-| **[[docs:techref:bootloader]]:**           | MikroTik RouterBoot (Rescue- and Main-Bootloader)   | +[[docs:techref:bootloader]]           | MikroTik RouterBoot (Rescue- and Main-Bootloader)   | 
-| **Default Operating System:**             | MikroTik RouterOS v4, Level5-license                | +Default Operating System              | MikroTik RouterOS v4, Level5-license                | 
-| **[[docs:techref:hardware:soc|System-On-Chip]]:**  | Atheros AR7130 | +[[docs:techref:hardware:soc|System-On-Chip]]   | Atheros AR7130    
-| **[[docs:techref:hardware:cpu|CPU]]/Speed**        | MIPS 24Kc 300 Mhz +[[docs:techref:hardware:cpu|CPU]]/Speed        | MIPS 24Kc 300 MHz 
-| **Flash-Chip:**  | [[Samsung NAND 64MiB 3,3V 8-bit]] +Flash-Chip   | [[Samsung NAND 64MiB 3,3V 8-bit]] 
-| **Flash size:**  | 64 MiB NAND-Flash                 +Flash size   | 64 MiB NAND-Flash                  
-| **RAM:**         | 64 MiB DDR-SDRAM                  +RAM          | 64 MiB DDR-SDRAM                   
-| **Wireless:**    | optional via 3x Mini-PCI IIIA/   | +Wireless     | optional via 3x Mini-PCI IIIA/   | 
-| **Ethernet:**    | 9x 10/100Base-T(X) (IC+ IP178C 8-port-switch with VLAN support [[docs:techref:swconfig]] | +Ethernet     | 9x 10/100Base-T(X) (IC+ IP178C 8-port-switch with VLAN support [[docs:techref:swconfig]] | 
-| **Internet:**    | n/a/xDSL/DOCSIS/3g/LTE   | +Internet     | n/a/xDSL/DOCSIS/3g/LTE   | 
-| **USB:**         | none      +USB          | none   
-| **[[docs:techref:hardware:port.serial|Serial]]:**   | [[#Serial|YES 1x Sub-DB9 RS-232C asynchronous]]   | +[[docs:techref:hardware:port.serial|Serial]]   | [[#Serial|YES 1x Sub-DB9 RS-232C asynchronous]]   | 
-| **[[docs:techref:hardware:port.jtag|JTAG]]:**       | [[#JTAG|Maybe]] (contacts on PCB, not tested)     | +[[docs:techref:hardware:port.jtag|JTAG]]       | [[#JTAG|Maybe]] (contacts on PCB, not tested)     | 
-| **LED:**             | Power, NAND activity, 5x user LED              | +LED               | Power, NAND activity, 5x user LED              | 
-| **Power options:**   | 10..28 VDC Power-over-Ethernet or Power-Jack   | +Power options     | 10..28 VDC Power-over-Ethernet or Power-Jack   | 
-| **Power consumption: ** | ~3 Watt, up to 10 Watt for MiniPCI-cards, maximum 16 Watt | +Power consumption | ~3 Watt, up to 10 Watt for MiniPCI-cards, maximum 16 Watt | 
-| **Dimensions:** | 160 mm x 105 mm, 189 grams |+Dimensions  | 160 mm x 105 mm, 189 grams |
  
 ==== Photos ==== ==== Photos ====
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1