Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revisionBoth sides next revision
toh:mikrotik:rb2011uias [2015/01/11 14:14] – created hecketoh:mikrotik:rb2011uias [2021/02/27 18:05] – cleanup according to the fixme notes danijeltudek
Line 1: Line 1:
 +====== Mikrotik RouterBoard RB2011-UiAS-2HnD-IN ======
  
 +The RB2011-UiAS-2HnD-IN differs from its predecessor RB2011-UAS-2HnD-IN supposedly only by supporting Mikrotik passive PoE on ETH10, but it is also identified to the OpenWrt linux kernel as a new model (2011r5 instead of 2011G) which is why it is not recognized by older OpenWrt kernels that do recognize the RB2011-UAS-2HnD-IN. The -IN refers to the indoor enclosure. The routerboard is also available without enclosure as RB2011-UiAS-2HnD.
 +
 +
 +===== Supported Versions =====
 +---- datatable ----
 +cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, OWrt Forum Topic URL_url, Device Techdata_pageid
 +headers : Brand, Model, Version, Current Release, OEM Info, Forum Topic, Technical Data
 +align   : c,c,c,c,c,c,c
 +filter  : Model=RB2011UiAS-2HnD-IN
 +----
 +
 +
 +===== Hardware Highlights =====
 +---- datatable ----
 +cols    : Model, Versions, CPU, CPU MHz, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4GHz, WLAN 5.0GHz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_
 +header  : Model, Version,SoC,CPU MHz,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB
 +align   : c,c,c,c,c,c,c,c,c,c,c,c,c
 +filter  : Model=RB2011UiAS-2HnD-IN
 +----
 +
 +
 +===== Installation =====
 +---- datatable ----
 +cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url
 +headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock
 +align   : c,c,c
 +filter  : Model=RB2011UiAS-2HnD-IN
 +----
 +
 +Please refer to [[toh:mikrotik:common|Common Procedures for Mikrotik RouterBoard Products]].
 +
 +
 +===== Hardware =====
 +==== Info ====
 +^ Architecture        | MIPS                                                             |
 +^ Vendor              | MikroTik                                                         |
 +^ Bootloader          | RouterBOOT                                                       |
 +^ System-On-Chip      | AR9344 SoC                                                       |
 +^ CPU Speed           | 600 MHz - can be overclocked from boot monitor                   |
 +^ Flash size          | 128 MiB NAND Flash                                               |
 +^ RAM                 | 128 MiB DDR2                                                     |
 +^ Wireless            | AR9380 802.11b/g/n dual chain (on SoC)                           |
 +^ Ethernet            | AR8327 - 5x 10/100/1000MBit/s BASE-T* + 1x SFP (separate chip)   |
 +^                     | AR8227 - 5x 10/100MBit/s BASE-T (on SoC)                         |
 +^ USB                 | 1x 2.0 micro (host/device, OTG cable included)                   |
 +^ Serial              | CISCO/Lantronix pinout RJ45 console port.                        |
 +^ JTAG                | no?                                                              |
 +^ other               | 2" color touch display                                           |
 +
 +FIXME [[http://i.mt.lv/routerboard/files/Block-RB2011UAS-2HnD.pdf|vendor supplied hardware diagram]]
 +
 +[[https://lists.openwrt.org/pipermail/openwrt-devel/2014-December/029838.html|Register layout]]
 +[[http://microchip.ho.ua/data/AR9344.pdf|AR9344 - Atheros Datasheet]]
 +[[http://microchip.ho.ua/data/AR8327.pdf|AR8327 - Atheros Datasheet]]
 +
 +| 31 | TX_INVERT - Decides whether to select the inversion of the GTX clock after the delay line |
 +| 30 | GIGE_QUAD - Decides whether to allow a 2 ns shift (clock in the middle of a data transfer) to the GTX clock. This bit is only effective when bit 25 is set |
 +| 29:28 | RX_DELAY - The delay buffers in the Rx clock path to adjust against the edge/middle- aligned RGMII inputs |
 +| 27:26 | TX_DELAY - Delay line for the GTX clock that goes along with the  data |
 +| 25 | GIGE - Set only after a 1000 Mbps connection has been negotiated |
 +| 24 | OFFSET_PHASE - Used to select if the start is from the positive or negative phase (or whether to have a 180 degree change in addition to the phase-delay in [11:8]. |
 +
 +  0x6f: 30 29    27 26 25 24
 +  0x3e:    29 28 27 26 25
 +
 +===== Metarouter =====
 +
 +See [[docs:guide-user:virtualization:metarouter|Metarouter Virtualization on Mikrotik RouterBoard]]
 +
 +===== See also =====
 +
 +* [[:toh:mikrotik:rb2011]]
 +===== Tags =====
 +[[meta:tags|How to add tags]]
 +{{tag>AR9344 128NAND 128RAM}}
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1