| Both sides previous revision Previous revision Next revision | Previous revision Next revisionBoth sides next revision |
| toh:mercusys:mr90x_v1 [2023/07/29 14:36] – [MERCUSYS MR90X v1] csharper2005 | toh:mercusys:mr90x_v1 [2024/11/30 21:25] – [UART method] csharper2005 |
|---|
| /* DO NOT CREATE NEW DEVICEPAGES VIA COPY & PASTE! */ | /* DO NOT CREATE NEW DEVICEPAGES VIA COPY & PASTE! */ |
| /* USE https://openwrt.org/meta/create_new_device_page */ | /* USE https://openwrt.org/meta/create_new_device_page */ |
| |
| {{page>meta:infobox:construction&noheader&nofooter&noeditbtn}} | |
| |
| The MERCUSYS MR90X(EU) v1 router supports 4 802.11ax streams on both 2.4GHz @40MHz and 5GHz @160MHz for a combined 6000Mbps wireless speed. It is based on the MediaTek MT7986B SoC. | The MERCUSYS MR90X(EU) v1 router supports 4 802.11ax streams on both 2.4GHz @40MHz and 5GHz @160MHz for a combined 6000Mbps wireless speed. It is based on the MediaTek MT7986B SoC. |
| | |
| | The Chinese model X60G(AX6000) is **NOT** the same, which doesn't have a 2.5 Gpbs PHY either. |
| |
| /*****/ | /*****/ |
| ===== Supported Versions ===== | ===== Supported Versions ===== |
| |
| <WRAP BOX> | <!-- ToH: { |
| FIXME | "source": "json", |
| - The tables below are automatically generated, **once the correct filters for Brand and Model are set.** | "dom": "t", |
| - If the tables below show information for ''<nowiki>MERCUSYS MR90X v1</nowiki>'', everything is OK and you can delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. | "paging": false, |
| - If the tables below contain "Nothing found", it means that either | "rotate": true, |
| - the dataentry page for MERCUSYS MR90X v1 is missing. Please [[meta:create_new_dataentry_page|create a new dataentry page]] first, then reload this page. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. | "shownColumns": ["brand", "model", "version", "supportedcurrentrel", "oemdevicehomepageurl", "forumsearch", "deviceid"], |
| - filters are not set correctly. Most common reason for "Nothing found": The dataentry does not contain a Version, but we are filtering here for version -> Please **edit this section and adjust the filters with the proper Brand, Model and Version.** In case the dataentry does not contain a version, delete the line ''filter : Versions~''. Just try, it's easy. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. | "filterColumns": {"brand": "^MERCUSYS$", "model": "^MR90X$", "version": "^v1$"} |
| - If the tables still contain "Nothing found": Don't panic, calm down, take a deep breath and [[:contact|contact a wiki admin]] (tmomas) for help. | } --> |
| </WRAP> | |
| | |
| ---- datatable ---- | |
| cols : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, Forum Search_search-forums, Device Techdata_pageid | |
| headers : Brand, Model, Version, Current Release, OEM Info, Forum Search, Technical Data | |
| align : c,c,c,c,c,c,c | |
| filter : Brand=MERCUSYS | |
| filter : Model=MR90X | |
| filter : Versions~v1 | |
| ---- | |
| |
| /* If no unsupported functions known, comment out the following datatable or delete it. */ | /* If no unsupported functions known, comment out the following datatable or delete it. */ |
| ---- datatable ---- | /* |
| cols : Unsupported Functions_unsupporteds | <!-- ToH: { |
| filter : Brand=MERCUSYS | "source": "json", |
| filter : Model=MR90X | "dom": "t", |
| filter : Versions~v1 | "paging": false, |
| ---- | "shownColumns": ["unsupported_functions", "model", "version", "cpu", "cpumhz", "cpucores", "flashmb", "rammb", "wlanhardware", "wlan24ghz", "wlan50ghz", "ethernet100mports", "ethernet1gports", "modem", "usbports"], |
| | "filterColumns": {"brand": "^MERCUSYS$", "model": "^MR90X$", "version": "^v1$"} |
| | } --> |
| |
| ===== Experimental Versions ===== | |
| |
| /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * | ===== Installation ===== |
| * The official Table of Hardware only lists current, stable versions of OpenWrt. * | /* stable release */ |
| * Use this space to describe any on-going efforts to create a newer version * | |
| * of the firmware for this device. Provide links to firmware images, * | |
| * active threads on the forum, or other sources of information. * | |
| * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ | |
| |
| //None at this time.// | <!-- ToH: { |
| | "source": "json", |
| | "dom": "t", |
| | "paging": false, |
| | "rotate": true, |
| | "shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtinstallurl", "firmwareopenwrtupgradeurl", "firmwareoemstockurl"], |
| | "filterColumns": {"brand": "^MERCUSYS$", "model": "^MR90X$", "version": "^v1$"} |
| | } --> |
| |
| ===== Hardware Highlights ===== | ==== Installation ==== |
| ---- datatable ---- | |
| cols : Model, Versions, CPU, CPU MHz, CPU Cores_numcores, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4GHz, WLAN 5.0GHz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_ | |
| header : Model, Version,SoC,CPU MHz,CPU Cores,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB | |
| align : c,c,c,c,c,c,c,c,c,c,c,c,c | |
| filter : Brand=MERCUSYS | |
| filter : Model=MR90X | |
| filter : Versions~v1 | |
| ---- | |
| |
| | 1. Connect network cable to the LAN1 port of the router |
| |
| ===== Installation ===== | 2. Login as root via SSH (router IP, port ''20001'', password - your web interface password) |
| /* stable release */ | |
| /* uncomment once stable release is available | |
| ---- datatable ---- | |
| cols : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url | |
| headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock | |
| align : c,c,c | |
| filter : Brand=MERCUSYS | |
| filter : Model=MR90X | |
| filter : Versions~v1 | |
| ---- | |
| */ | |
| |
| | <code bash> |
| | BusyBox v1.19.4 (2022-09-15 21:10:21 CST) built-in shell (ash) |
| | Enter 'help' for a list of built-in commands. |
| |
| /* snapshot */ | MM NM MMMMMMM M M |
| /* delete once stable release is available */ | $MMMMM MMMMM MMMMMMMMMMM MMM MMM |
| ---- datatable ---- | MMMMMMMM MM MMMMM. MMMMM:MMMMMM: MMMM MMMMM |
| cols : Model, Versions, Supported Current Rel, Firmware OpenWrt snapshot Install URL_url, Firmware OpenWrt snapshot Upgrade URL_url, Firmware OEM Stock URL_url | MMMM= MMMMMM MMM MMMM MMMMM MMMM MMMMMM MMMM MMMMM' |
| headers : Model, Version, Current Release, Firmware OpenWrt snapshot Install, Firmware OpenWrt snapshot Upgrade, Firmware OEM Stock | MMMM= MMMMM MMMM MM MMMMM MMMM MMMM MMMMNMMMMM |
| align : c,c,c | MMMM= MMMM MMMMM MMMMM MMMM MMMM MMMMMMMM |
| filter : Brand=MERCUSYS | MMMM= MMMM MMMMMM MMMMM MMMM MMMM MMMMMMMMM |
| filter : Model=MR90X | MMMM= MMMM MMMMM, NMMMMMMMM MMMM MMMM MMMMMMMMMMM |
| filter : Versions~v1 | MMMM= MMMM MMMMMM MMMMMMMM MMMM MMMM MMMM MMMMMM |
| ---- | MMMM= MMMM MM MMMM MMMM MMMM MMMM MMMM MMMM |
| | MMMM$ ,MMMMM MMMMM MMMM MMM MMMM MMMMM MMMM MMMM |
| | MMMMMMM: MMMMMMM M MMMMMMMMMMMM MMMMMMM MMMMMMM |
| | MMMMMM MMMMN M MMMMMMMMM MMMM MMMM |
| | MMMM M MMMMMMM M M |
| | M |
| | --------------------------------------------------------------- |
| | For those about to rock... (Attitude Adjustment, unknown) |
| | --------------------------------------------------------------- |
| | admin@Akronite:/root$ |
| | </code> |
| |
| | 3. Run the following command: |
| |
| -> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]] | <code bash> |
| | fw_printenv | grep tp_boot_idx |
| | </code> |
| |
| FIXME Please add the installation procedure here. | If the result is ''tp_boot_idx=1'' then install MERCUSYS stock firmware using web interface and start from the p.2. Otherwise, go to the next step. |
| |
| ==== Flash Layout ==== | 4. Open for editing ''/etc/hotplug.d/iface/65-iptv'' (e.g., using WinSCP and SSH settings from the p.2) |
| <WRAP BOX> | |
| FIXME //[[:docs:techref:flash.layout#discovery_how_to_find_out|Find out flash layout]], then add the flash layout table here (copy, paste, modify the [[docs:techref:flash.layout#partitioning_of_the_flash|example]]).// | |
| |
| Please check out the article [[docs:techref:flash.layout|Flash layout]]. It contains examples and explanations that describe how to document the flash layout. | 5. Add a newline after ''#!/bin/sh'': |
| </WRAP> | <code bash> |
| | telnetd -l /bin/login.sh |
| | </code> |
| |
| ==== OEM easy installation ==== | 6. Save ''65-iptv'' file |
| |
| <WRAP BOX> | 7. Toggle ''IPTV/VLAN Enable'' checkbox in the router web interface and save |
| FIXME //The instructions below are for Broadcom devices and only serve as an example.//\\ | |
| **//Remove / modify them if they do not apply to this particular device!//** | |
| |
| This section deals with | 8. Make sure that telnetd is running: |
| * How you install OpenWrt from a device freshly opened | <code bash> |
| * The steps required such as reset to factory defaults if the device has already been configured | netstat -ltunp | grep 23 |
| | </code> |
| |
| **Note:** Reset router to factory defaults if it has been previously configured. | 9. Login via telnet to router IP, port ''23'' (no username and password are required) |
| * Browse to ''<nowiki>http://192.168.1.1/Upgrade.asp</nowiki>'' | |
| * Upload .bin file to router | |
| * Wait for it to reboot | |
| * Telnet to 192.168.1.1 and set a root password, or browse to ''<nowiki>http://192.168.1.1</nowiki>'' if LuCI is installed. | |
| </WRAP> | |
| |
| ==== OEM installation using the TFTP method ==== | <code> |
| | BusyBox v1.19.4 (2022-09-15 21:10:21 CST) built-in shell (ash) |
| | Enter 'help' for a list of built-in commands. |
| |
| -> [[docs:guide-user:installation:generic.flashing.tftp]] | MM NM MMMMMMM M M |
| | $MMMMM MMMMM MMMMMMMMMMM MMM MMM |
| | MMMMMMMM MM MMMMM. MMMMM:MMMMMM: MMMM MMMMM |
| | MMMM= MMMMMM MMM MMMM MMMMM MMMM MMMMMM MMMM MMMMM' |
| | MMMM= MMMMM MMMM MM MMMMM MMMM MMMM MMMMNMMMMM |
| | MMMM= MMMM MMMMM MMMMM MMMM MMMM MMMMMMMM |
| | MMMM= MMMM MMMMMM MMMMM MMMM MMMM MMMMMMMMM |
| | MMMM= MMMM MMMMM, NMMMMMMMM MMMM MMMM MMMMMMMMMMM |
| | MMMM= MMMM MMMMMM MMMMMMMM MMMM MMMM MMMM MMMMMM |
| | MMMM= MMMM MM MMMM MMMM MMMM MMMM MMMM MMMM |
| | MMMM$ ,MMMMM MMMMM MMMM MMM MMMM MMMMM MMMM MMMM |
| | MMMMMMM: MMMMMMM M MMMMMMMMMMMM MMMMMMM MMMMMMM |
| | MMMMMM MMMMN M MMMMMMMMM MMMM MMMM |
| | MMMM M MMMMMMM M M |
| | M |
| | --------------------------------------------------------------- |
| | For those about to rock... (Attitude Adjustment, unknown) |
| | --------------------------------------------------------------- |
| | root@Akronite:/# |
| | </code> |
| |
| === Specific values needed for tftp === | 10. Upload OpenWrt ''initramfs-kernel.bin'' to the ''/tmp'' folder of the router (e.g., using WinSCP and SSH settings from the p.2, or with ''cat initramfs-kernel.bin | ssh -p 20001 root@YOUR_ROUTER_IP "cat > /tmp/initramfs-kernel.bin"'' -- can't simply ''scp'' the file because there's no SFTP on the router) |
| | |
| | 11. Stock busybox doesn't contain ''ubiupdatevol'' command. Hence, we need to download and upload the full version of busybox to the router. For example, from ArchLinux - https://archlinuxarm.org/packages/aarch64/busybox. Dowload the pkg.tar.xz file, unpack it with ''tar xvf busybox-1.36.1-1-aarch64.pkg.tar.xz'', then upload ''usr/bin/busybox'' to the ''/tmp'' dir of the router and run in the telnet shell: |
| | <code bash> |
| | cd /tmp |
| | chmod a+x busybox |
| | </code> |
| |
| <WRAP BOX> | 12. Check ''initramfs-kernel.bin'' size: |
| | <code bash> |
| | du -h initramfs-kernel.bin |
| | </code> |
| |
| FIXME Enter values for "FILL-IN" below | 13. Delete old and create a new one ''kernel'' volume with appropriate size (greater than ''initramfs-kernel.bin'' size): |
| | <code bash> |
| | ubirmvol /dev/ubi0 -N kernel |
| | ubimkvol /dev/ubi0 -n 1 -N kernel -s 9MiB |
| | </code> |
| |
| ^ Bootloader tftp server IPv4 address | FILL-IN | | 14. Write OpenWrt ''initramfs-kernel.bin'' to the flash: |
| ^ Bootloader MAC address (special) | FILL-IN | | <code bash> |
| ^ Firmware tftp image | [[:downloads|Latest OpenWrt release]] (**''NOTE:''** Name must contain //"tftp"//) | | ./busybox ubiupdatevol /dev/ubi0_1 /tmp/initramfs-kernel.bin |
| ^ TFTP transfer window | FILL-IN seconds | | </code> |
| ^ TFTP window start | approximately FILL-IN seconds after power on | | |
| ^ TFTP client required IP address | FILL-IN | | |
| |
| </WRAP> | 15. Reboot to OpenWrt initramfs: |
| | <code bash> |
| | reboot |
| | </code> |
| |
| ===== Upgrading OpenWrt ===== | 16. Login as root via SSH (IP ''192.168.1.1'', port ''22'') |
| -> [[docs:guide-user:installation:generic.sysupgrade]] | |
| |
| <WRAP BOX> | 17. Once inside OpenWrt, set (or update) env variables: |
| | <code bash> |
| | fw_setenv baudrate 115200 |
| | fw_setenv bootargs "ubi.mtd=ubi0 console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 init=/etc/preinit" |
| | fw_setenv fdtcontroladdr 5ffc0e70 |
| | fw_setenv ipaddr 192.168.1.1 |
| | fw_setenv loadaddr 0x46000000 |
| | fw_setenv mtdids "spi-nand0=spi-nand0" |
| | fw_setenv mtdparts "spi-nand0:2M(boot),1M(u-boot-env),50M(ubi0),50M(ubi1),8M(userconfig),4M(tp_data)" |
| | fw_setenv netmask 255.255.255.0 |
| | fw_setenv serverip 192.168.1.2 |
| | fw_setenv stderr serial@11002000 |
| | fw_setenv stdin serial@11002000 |
| | fw_setenv stdout serial@11002000 |
| | fw_setenv tp_boot_idx 0 |
| | </code> |
| |
| FIXME These are generic instructions. Update with your router's specifics. | 18. Upload OpenWrt ''sysupgrade.bin'' image to the ''/tmp'' dir of the router |
| | |
| | 19. Run sysupgrade: |
| | <code bash> |
| | sysupgrade -n /tmp/sysupgrade.bin |
| | </code> |
| | |
| | ==== Installation (using serial console) ==== |
| | |
| | 1. Place OpenWrt initramfs image on tftp server with IP ''192.168.1.2'' |
| | |
| | 2. Attach [[https://openwrt.org/toh/mercusys/mr90x_v1#serial|UART]], switch on the router and interrupt the boot process by pressing ''Ctrl-C'' |
| | |
| | 3. Load and run OpenWrt initramfs image: |
| | <code bash> |
| | tftpboot initramfs-kernel.bin |
| | bootm |
| | </code> |
| | |
| | 4. Once inside OpenWrt, set (or update) env variables: |
| | <code bash> |
| | fw_setenv baudrate 115200 |
| | fw_setenv bootargs "ubi.mtd=ubi0 console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 init=/etc/preinit" |
| | fw_setenv fdtcontroladdr 5ffc0e70 |
| | fw_setenv ipaddr 192.168.1.1 |
| | fw_setenv loadaddr 0x46000000 |
| | fw_setenv mtdids "spi-nand0=spi-nand0" |
| | fw_setenv mtdparts "spi-nand0:2M(boot),1M(u-boot-env),50M(ubi0),50M(ubi1),8M(userconfig),4M(tp_data)" |
| | fw_setenv netmask 255.255.255.0 |
| | fw_setenv serverip 192.168.1.2 |
| | fw_setenv stderr serial@11002000 |
| | fw_setenv stdin serial@11002000 |
| | fw_setenv stdout serial@11002000 |
| | fw_setenv tp_boot_idx 0 |
| | </code> |
| | |
| | 5. Run ''sysupgrade -n'' with the sysupgrade OpenWrt image |
| | |
| | ==== Installation (OpenWrt U-Boot layout) ==== |
| | |
| | 1. Download files from //https://downloads.openwrt.org/ -> **Choose release you need** -> targets -> mediatek -> filogic:// |
| | openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-bl31-uboot.fip |
| | openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-initramfs-recovery.itb |
| | openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-preloader.bin |
| | openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-squashfs-sysupgrade.itb |
| | |
| | 2. Connect network cable to the LAN1 port of the router |
| | |
| | 3. Login as root via SSH (router IP, port ''20001'', password - your web interface password) |
| | |
| | <code bash> |
| | BusyBox v1.19.4 (2022-09-15 21:10:21 CST) built-in shell (ash) |
| | Enter 'help' for a list of built-in commands. |
| | |
| | MM NM MMMMMMM M M |
| | $MMMMM MMMMM MMMMMMMMMMM MMM MMM |
| | MMMMMMMM MM MMMMM. MMMMM:MMMMMM: MMMM MMMMM |
| | MMMM= MMMMMM MMM MMMM MMMMM MMMM MMMMMM MMMM MMMMM' |
| | MMMM= MMMMM MMMM MM MMMMM MMMM MMMM MMMMNMMMMM |
| | MMMM= MMMM MMMMM MMMMM MMMM MMMM MMMMMMMM |
| | MMMM= MMMM MMMMMM MMMMM MMMM MMMM MMMMMMMMM |
| | MMMM= MMMM MMMMM, NMMMMMMMM MMMM MMMM MMMMMMMMMMM |
| | MMMM= MMMM MMMMMM MMMMMMMM MMMM MMMM MMMM MMMMMM |
| | MMMM= MMMM MM MMMM MMMM MMMM MMMM MMMM MMMM |
| | MMMM$ ,MMMMM MMMMM MMMM MMM MMMM MMMMM MMMM MMMM |
| | MMMMMMM: MMMMMMM M MMMMMMMMMMMM MMMMMMM MMMMMMM |
| | MMMMMM MMMMN M MMMMMMMMM MMMM MMMM |
| | MMMM M MMMMMMM M M |
| | M |
| | --------------------------------------------------------------- |
| | For those about to rock... (Attitude Adjustment, unknown) |
| | --------------------------------------------------------------- |
| | admin@Akronite:/root$ |
| | </code> |
| | |
| | 4. Run the following command: |
| | |
| | <code bash> |
| | fw_printenv | grep tp_boot_idx |
| | </code> |
| | |
| | If the result is ''tp_boot_idx=1'' then install MERCUSYS stock firmware using web interface and start from the p.2. Otherwise, go to the next step. |
| | |
| | 5. Open for editing ''/etc/hotplug.d/iface/65-iptv'' (e.g., using WinSCP and SSH settings from the p.2) |
| | |
| | 6. Add a newline after ''#!/bin/sh'': |
| | <code bash> |
| | telnetd -l /bin/login.sh |
| | </code> |
| | |
| | 7. Save ''65-iptv'' file |
| | |
| | 8. Toggle ''IPTV/VLAN Enable'' checkbox in the router web interface and save |
| | |
| | 9. Make sure that telnetd is running: |
| | <code bash> |
| | netstat -ltunp | grep 23 |
| | </code> |
| | |
| | 10. Login via telnet to router IP, port ''23'' (no username and password are required) |
| | |
| | <code> |
| | BusyBox v1.19.4 (2022-09-15 21:10:21 CST) built-in shell (ash) |
| | Enter 'help' for a list of built-in commands. |
| | |
| | MM NM MMMMMMM M M |
| | $MMMMM MMMMM MMMMMMMMMMM MMM MMM |
| | MMMMMMMM MM MMMMM. MMMMM:MMMMMM: MMMM MMMMM |
| | MMMM= MMMMMM MMM MMMM MMMMM MMMM MMMMMM MMMM MMMMM' |
| | MMMM= MMMMM MMMM MM MMMMM MMMM MMMM MMMMNMMMMM |
| | MMMM= MMMM MMMMM MMMMM MMMM MMMM MMMMMMMM |
| | MMMM= MMMM MMMMMM MMMMM MMMM MMMM MMMMMMMMM |
| | MMMM= MMMM MMMMM, NMMMMMMMM MMMM MMMM MMMMMMMMMMM |
| | MMMM= MMMM MMMMMM MMMMMMMM MMMM MMMM MMMM MMMMMM |
| | MMMM= MMMM MM MMMM MMMM MMMM MMMM MMMM MMMM |
| | MMMM$ ,MMMMM MMMMM MMMM MMM MMMM MMMMM MMMM MMMM |
| | MMMMMMM: MMMMMMM M MMMMMMMMMMMM MMMMMMM MMMMMMM |
| | MMMMMM MMMMN M MMMMMMMMM MMMM MMMM |
| | MMMM M MMMMMMM M M |
| | M |
| | --------------------------------------------------------------- |
| | For those about to rock... (Attitude Adjustment, unknown) |
| | --------------------------------------------------------------- |
| | root@Akronite:/# |
| | </code> |
| | |
| | 11. Upload OpenWrt ''openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-initramfs-recovery.itb'' to the ''/tmp'' folder of the router (e.g., using WinSCP and SSH settings from the p.3, or with ''cat openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-initramfs-recovery.itb | ssh -p 20001 root@YOUR_ROUTER_IP "cat > /tmp/openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-initramfs-recovery.itb"'' -- can't simply ''scp'' the file because there's no SFTP on the router) |
| | |
| | 12. Stock busybox doesn't contain ''ubiupdatevol'' command. Hence, we need to download and upload the full version of busybox to the router. For example, from ArchLinux - https://archlinuxarm.org/packages/aarch64/busybox. |
| | |
| | Download the ''pkg.tar.xz'' file, unpack it with ''tar xvf busybox-1.36.1-1-aarch64.pkg.tar.xz'', then upload ''usr/bin/busybox'' to the ''/tmp'' dir of the router and run in the telnet shell: |
| | <code bash> |
| | cd /tmp |
| | chmod a+x busybox |
| | </code> |
| | |
| | 13. Check ''initramfs-kernel.bin'' size: |
| | <code bash> |
| | du -h openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-initramfs-recovery.itb |
| | </code> |
| | |
| | 14. Delete old and create a new one ''kernel'' volume with appropriate size (greater than ''initramfs-kernel.bin'' size): |
| | <code bash> |
| | ubirmvol /dev/ubi0 -N kernel |
| | ubimkvol /dev/ubi0 -n 1 -N kernel -s 9MiB |
| | </code> |
| | |
| | 15. Write OpenWrt ''initramfs-kernel.bin'' to the flash: |
| | <code bash> |
| | ./busybox ubiupdatevol /dev/ubi0_1 /tmp/openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-initramfs-recovery.itb |
| | </code> |
| | |
| | 16. Make backups: |
| | <code bash> |
| | cat /dev/mtd0 > /tmp/boot.bin |
| | cat /dev/mtd5 > /tmp/tp_data.bin |
| | </code> |
| | Copy ''/tp_data dir'' content, ''/tmp/boot.bin'' and ''/tmp/tp_data.bin'' and to your PC using scp. You can also backup the remaining partititons. Copy backups to a safe place, they are required for the next steps and stock firmware recovery. |
| | |
| | 17. Reboot to OpenWrt initramfs: |
| | <code bash> |
| | reboot |
| | </code> |
| | |
| | 18. Copy OpenWrt ''openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-bl31-uboot.fip'', ''openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-preloader.bin'', ''openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-squashfs-sysupgrade.itb'' and ''MT7986_EEPROM.bin'', ''default-mac'' (from ''/tp_data'' backup) to the ''/tmp'' folder of the router using scp. |
| | |
| | 19. Prepare UBI: |
| | <code bash> |
| | ubidetach -p /dev/mtd3; ubiformat /dev/mtd3 -y; ubiattach -p /dev/mtd3 |
| | ubimkvol /dev/ubi0 -N fip -t static -s 1MiB |
| | ubiupdatevol /dev/ubi0_0 /tmp/openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-bl31-uboot.fip |
| | ubimkvol /dev/ubi0 -N ubootenv -s 0x1f000 |
| | ubimkvol /dev/ubi0 -N ubootenv2 -s 0x1f000 |
| | </code> |
| | |
| | 20. Install ''kmod-mtd-rw'' and unlock partitions: |
| | <code bash> |
| | opkg update && opkg install kmod-mtd-rw |
| | insmod mtd-rw i_want_a_brick=1 |
| | mtd unlock boot |
| | mtd unlock bl2 |
| | mtd unlock factory |
| | </code> |
| | |
| | 21. Prepare "factory" partition: |
| | <code bash> |
| | dd if=/dev/zero bs=$((0x8000)) count=1 | tr '\000' '\377' > /tmp/factory.bin |
| | dd if=/tmp/MT7986_EEPROM.bin of=/tmp/factory.bin conv=notrunc |
| | dd if=/tmp/default-mac >> /tmp/factory.bin |
| | </code> |
| | |
| | 22. Write "factory" partition: |
| | <code bash> |
| | mtd erase factory |
| | mtd write /tmp/factory.bin factory |
| | </code> |
| | |
| | 23. Write preloader partition: |
| | <code bash> |
| | mtd erase bl2 |
| | mtd write /tmp/openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-preloader.bin bl2 |
| | </code> |
| | |
| | 24. Write OpenWrt sysupgrade image: |
| | <code bash> |
| | sysupgrade -n /tmp/openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-squashfs-sysupgrade.itb |
| | </code> |
| | ==== Flash Layout ==== |
| | <code bash> |
| | 0x000000000000-0x000000200000 : "boot" 0x200000 |
| | 0x000000200000-0x000000300000 : "u-boot-env" 0x100000 |
| | 0x000000300000-0x000003500000 : "ubi0" 0x3200000 |
| | 0x000003500000-0x000006700000 : "ubi1" 0x3200000 |
| | 0x000006700000-0x000006f00000 : "userconfig" 0x800000 |
| | 0x000006f00000-0x000007300000 : "tp_data" 0x400000 |
| | </code> |
| | |
| | === ubi sctructure === |
| | <code bash> |
| | +---------------------+--------------------+---------------------+---------------------+ |
| | | UBI Image: | | | | |
| | | Volume Name: uboot | Volume Name: uboot | Volume Name: kernel | Volume Name: rootfs | |
| | | Volume Name: kernel | Vol ID: 0 | Vol ID: 1 | Vol ID: 2 | |
| | | Volume Name: rootfs | Vol_type: 'static' | Vol_type: 'static' | Vol_type: 'static' | |
| | +---------------------+--------------------+---------------------+---------------------+ |
| | </code> |
| | uboot - secondary u-boot in UBI |
| | |
| | <code bash> |
| | MT7986> version |
| | U-Boot 2022.01-rc4 (Sep 15 2022 - 20:55:22 +0800) |
| | </code> |
| | |
| | MAC address is stored in UBI partition ''tp_data'', file ''default-mac''. OEM wireless eeprom is also there (file ''MT7986_EEPROM.bin''). |
| | |
| | ==== OEM easy installation ==== |
| | |
| | //None at this time.// |
| | ==== OEM installation using the TFTP method ==== |
| | |
| | //None at this time.// |
| | ===== Upgrading OpenWrt ===== |
| | -> [[docs:guide-user:installation:generic.sysupgrade]] |
| |
| ==== LuCI Web Upgrade Process ==== | ==== LuCI Web Upgrade Process ==== |
| |
| * Browse to ''<nowiki>http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/</nowiki>'' LuCI Upgrade URL | * Browse to ''<nowiki>http://192.168.1.1/cgi-bin/luci/admin/system/flash</nowiki>'' LuCI Upgrade URL |
| * Upload image file for sysupgrade to LuCI | * Upload image file for sysupgrade to LuCI |
| * Wait for reboot | * Wait for reboot |
| |
| If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line. | If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line. |
| There are two command line methods for upgrading: | //Note: It is important that you put the firmware image into the ramdisk (''/tmp'') before you start flashing.// |
| | |
| * ''sysupgrade'' | |
| * ''mtd'' | |
| | |
| Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing. | |
| |
| === sysupgrade === | === sysupgrade === |
| <code> | <code> |
| cd /tmp | cd /tmp |
| wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc | wget http://downloads.openwrt.org/.... |
| sysupgrade /tmp/xxx.abc | sysupgrade /tmp/sysupgrade.bin |
| </code> | </code> |
| |
| === mtd === | ===== Debricking ===== |
| | -> [[docs:guide-user:troubleshooting:generic.debrick]] |
| |
| If ''sysupgrade'' does not support this router, use ''mtd''. | 1. Press Reset button and power on the router |
| |
| * Login as root via SSH on 192.168.1.1, then enter the following commands: | 2. Navigate to U-Boot recovery web server (http://192.168.1.1/) and upload the OEM firmware |
| |
| <code> | ==== UART method ==== |
| cd /tmp | 1. Place OpenWrt initramfs image on tftp server with IP ''192.168.1.2'' |
| wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc | |
| mtd write /tmp/xxx.abc linux && reboot | 2. Attach UART, switch on the router and interrupt the boot process by pressing ''Ctrl-C'' |
| | |
| | 3. Load and run OpenWrt initramfs image: |
| | <code bash> |
| | tftpboot initramfs-kernel.bin |
| | bootm |
| </code> | </code> |
| |
| </WRAP> | 4. Do what you need (restore partitions from a backup, install OpenWrt etc.) |
| |
| ===== Debricking ===== | ===== Debricking (OpenWrt U-Boot layout) ===== |
| -> [[docs:guide-user:troubleshooting:generic.debrick]] | |
| | 1. Place OpenWrt ''openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-initramfs-recovery.itb'' image on the tftp server (IP: ''192.168.1.254''). |
| | |
| | 2. Press "reset" button and power on the router. After ~10 sec release the button. |
| | |
| | 3. Use OpenWrt initramfs system for recovery. |
| | |
| | ==== BL2 and FIP recovery ==== |
| | |
| | Use ''mtk_uartboot'' and UART connetion if BL2 or FIP in UBI is destroyed: |
| | |
| | https://github.com/981213/mtk_uartboot |
| |
| | https://openwrt.org/toh/mercusys/mr90x_v1#serial |
| ===== Failsafe mode ===== | ===== Failsafe mode ===== |
| -> [[docs:guide-user:troubleshooting:failsafe_and_factory_reset]] | -> [[docs:guide-user:troubleshooting:failsafe_and_factory_reset]] |
| |
| ===== Specific Configuration ===== | ===== Specific Configuration ===== |
| |
| <WRAP BOX> | |
| FIXME Please fill in real values for this device, then remove the EXAMPLEs | |
| |
| ==== Network interfaces ==== | ==== Network interfaces ==== |
| | |
| The default network configuration is: | The default network configuration is: |
| ^ Interface Name ^ Description ^ Default configuration ^ | |
| | br-lan | EXAMPLE LAN & WiFi | EXAMPLE 192.168.1.1/24 | | |
| | vlan0 (eth0.0) | EXAMPLE LAN ports (1 to 4) | EXAMPLE None | | |
| | vlan1 (eth0.1) | EXAMPLE WAN port | EXAMPLE DHCP | | |
| | wl0 | EXAMPLE WiFi | EXAMPLE Disabled | | |
| |
| </WRAP> | ^ Interface Name ^ Description ^ Default configuration ^ |
| | | br-lan | LAN & WiFi | 192.168.1.1/24 | |
| | | wan | WAN port | DHCP | |
| |
| ==== Switch Ports (for VLANs) ==== | ==== Switch Ports (for VLANs) ==== |
| <WRAP BOX> | |
| FIXME Please fill in real values for this device, then remove the EXAMPLEs | |
| |
| Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on. | ^ Port ^ Switch port ^ |
| ^ Port ^ Switch port ^ | | WAN/LAN 2.5Gbps | wan | |
| | Internet (WAN) | EXAMPLE 4 | | | WAN/LAN 1Gbps | lan0 | |
| | LAN 1 | EXAMPLE 3 | | | LAN1 | lan1 | |
| | LAN 2 | EXAMPLE 2 | | | LAN2 | lan2 | |
| | LAN 3 | EXAMPLE 1 | | |
| | LAN 4 | EXAMPLE 0 | | |
| |
| </WRAP> | |
| |
| ==== Buttons ==== | ==== Buttons ==== |
| -> [[docs:guide-user:hardware:hardware.button]] on howto use and configure the hardware button(s). | -> [[docs:guide-user:hardware:hardware.button]] on howto use and configure the hardware button(s). |
| Here, we merely name the buttons, so we can use them in the above Howto. | Here, we merely name the buttons, so we can use them in the above Howto. |
| |
| <WRAP BOX> | |
| FIXME Please fill in real values for this device, then remove the EXAMPLEs | |
| |
| The MERCUSYS MR90X has the following buttons: | The MERCUSYS MR90X has the following buttons: |
| |
| ^ BUTTON ^ Event ^ | ^ BUTTON ^ Event ^ |
| | EXAMPLE Reset | reset | | | Reset | reset | |
| | EXAMPLE Secure Easy Setup | ses | | |
| | EXAMPLE No buttons at all. | - | | |
| |
| </WRAP> | |
| |
| ===== Hardware ===== | ===== Hardware ===== |
| ==== Info ==== | ==== Info ==== |
| <WRAP BOX> | |
| FIXME | |
| - This table is automatically generated, **once the correct filters for Brand and Model are set.** | |
| - If you see "Nothing." instead of a table, please **edit this section and adjust the filters with the proper Brand and Model.** Just try, it's easy. | |
| - If you still don't see a table here, or a table filled with '¿': [[toh:start|Is there already a Techdata page available]] for MERCUSYS MR90X v1? If not: [[meta:create_new_dataentry_page|Create one]]. | |
| - If you see a table with the desired device data, everything is OK and you can delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. | |
| - If it still doesn't work: Don't panic, calm down, take a deep breath and [[:contact|contact a wiki admin]] (tmomas) for help. | |
| </WRAP> | |
| |
| ---- datatemplatelist dttpllist ---- | <!-- ToH: { |
| template: meta:template_datatemplatelist | "source": "json", |
| cols : Brand, Model, Versions, Device Type, Availability, Supported Since Commit_git, Supported since Rel, Supported current Rel, Unsupported, Bootloader, CPU, Target, CPU MHz, Flash MBs, RAM MB, Switch, Ethernet 100M ports_, Ethernet Gbit ports_, Comments network ports_, Modem, VLAN, WLAN 2.4GHz, WLAN 5.0GHz, WLAN Hardwares, WLAN Comments_, Detachable Antennas_, USB ports_, SATA ports_, Comments USB SATA ports_, Serial, JTAG, LED count, Button count, Power supply, Device Techdata_pageid, Forum topic URL_url, wikidevi URL_url, OEM Device Homepage URL_url, Firmware OEM Stock URL_url, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Comments_ | "dom": "t", |
| filter : Brand=MERCUSYS | "paging": false, |
| filter : Model=MR90X | "rotate": true, |
| filter : Versions=v1 | "shownColumns": ["brand", "model", "version", "devicetype", "availability", "supportedsincecommit", "supportedsincerel", "supportedcurrentrel", "unsupported_functions", "bootloader", "cpu", "target", "cpumhz", "flashmb", "rammb", "switch", "ethernet100mports", "ethernet1gports", "commentsnetworkports", "modem", "vlan", "wlan24ghz", "wlan50ghz", "wlanhardware", "wlancomments", "detachableantennas", "usbports", "sataports", "commentsusbsataports", "serial", "jtag", "ledcount", "buttoncount", "powersupply", "deviceid", "owrt_forum_topic_url", "wikideviurl", "oemdevicehomepageurl", "firmwareoemstockurl", "firmwareopenwrtinstallurl", "firmwareopenwrtupgradeurl", "comments"], |
| ---- | "filterColumns": {"brand": "^MERCUSYS$", "model": "^MR90X$", "version": "^v1$"} |
| | } --> |
| |
| ==== Photos ==== | ==== Photos ==== |
| /* Thanks, your wiki administration - Oct. 2015 */ | /* Thanks, your wiki administration - Oct. 2015 */ |
| |
| | /* |
| //Front://\\ | //Front://\\ |
| **Insert photo of front of the casing** | **Insert photo of front of the casing** |
| //Backside label://\\ | //Backside label://\\ |
| **Insert photo of backside label** | **Insert photo of backside label** |
| | */ |
| |
| ==== Opening the case ==== | ==== Opening the case ==== |
| |
| **Note:** This will void your warranty! | **Note:** This may void your warranty! |
| |
| <WRAP BOX> | Unscrew the crews. There are also clips around the edge of the case you will need to prize open, using, for example, a plastic card. Be careful. Case latches are very tight. |
| FIXME //Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, ...// | |
| * To remove the cover and open the device, do a/b/c | |
| </WRAP> | |
| |
| //Main PCB://\\ | //Main PCB://\\ |
| | |
| | /* |
| **Insert photo of PCB** | **Insert photo of PCB** |
| | */ |
| | |
| |
| ==== Serial ==== | ==== Serial ==== |
| -> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc. | -> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc. |
| |
| How to connect to the Serial Port of this specific device:\\ | How to connect to the Serial Port of this specific device: |
| **Insert photo of PCB with markings for serial port** | |
| |
| <WRAP BOX> | {{media:mercusys:mr90x-v1_uart.jpeg?400|MERCUSYS MR90X v1 UART}} |
| FIXME //Replace EXAMPLE by real values.// | |
| </WRAP> | |
| |
| ^ Serial connection parameters\\ for MERCUSYS MR90X v1 | EXAMPLE 115200, 8N1, 3.3V | | The R3 and R6 are absent on the PCB. You should solder them or solder the jumpers. |
| | |
| | <code bash> |
| | V |
| | +-------+-------+-------+-------+ |
| | | +3.3V | GND | | | |
| | +---+---+-------+-------+-------+ |
| | | |
| | +--- Don't connect |
| | </code> |
| | |
| | ^ Serial connection parameters\\ for MERCUSYS MR90X v1 | 115200, 8N1, 3.3V | |
| |
| ==== JTAG ==== | ==== JTAG ==== |
| | |
| | None so far. |
| | |
| -> [[docs:techref:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc. | -> [[docs:techref:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc. |
| |
| | /* |
| How to connect to the JTAG Port of this specific device:\\ | How to connect to the JTAG Port of this specific device:\\ |
| **Insert photo of PCB with markings for JTAG port** | **Insert photo of PCB with markings for JTAG port** |
| | */ |
| ===== Bootloader mods ===== | ===== Bootloader mods ===== |
| | |
| | None so far. |
| | |
| -> [[docs:techref:bootloader]] | -> [[docs:techref:bootloader]] |
| |
| ==== OEM bootlog ==== | ==== OEM bootlog ==== |
| <WRAP bootlog> | <WRAP bootlog> |
| <nowiki>COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE</nowiki> | <nowiki>F0: 102B 0000 |
| | FA: 1040 0000 |
| | FA: 1040 0000 [0200] |
| | F9: 0000 0000 |
| | V0: 0000 0000 [0001] |
| | 00: 0000 0000 |
| | BP: 2400 0041 [0000] |
| | G0: 1190 0000 |
| | EC: 0000 0000 [1000] |
| | T0: 0000 0141 [010F] |
| | Jump to BL |
| | |
| | NOTICE: BL2: v2.6(release):02e589f3e-dirty |
| | NOTICE: BL2: Built : 20:56:26, Sep 15 2022 |
| | NOTICE: WDT: disabled |
| | NOTICE: EMI: Using DDR3 settings |
| | NOTICE: EMI: Detected DRAM size: 512MB |
| | NOTICE: EMI: complex R/W mem test passed |
| | NOTICE: SPI_NAND parses attributes from parameter page. |
| | NOTICE: SPI_NAND Detected ID 0x1 |
| | NOTICE: Page size 2048, Block size 131072, size 134217728 |
| | NOTICE: BL2: Booting BL31 |
| | NOTICE: BL31: v2.6(release):02e589f3e-dirty |
| | NOTICE: BL31: Built : 20:56:31, Sep 15 2022 |
| | |
| | |
| | U-Boot 2022.01-rc4 (Sep 15 2022 - 20:55:22 +0800) |
| | |
| | CPU: MediaTek MT7986 |
| | Model: mt7986-rfb |
| | DRAM: 512 MiB |
| | MMC: mmc@11230000: 0 |
| | Loading Environment from MTD... spi-nand: spi_nand spi_nand@1: GigaDevice SPI NAND was found. |
| | spi-nand: spi_nand spi_nand@1: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 128 |
| | *** Warning - bad CRC, using default environment |
| | |
| | In: serial@11002000 |
| | Out: serial@11002000 |
| | Err: serial@11002000 |
| | Net: |
| | Warning: ethernet@15100000 (eth0) using random MAC address - 7e:0c:df:07:13:c6 |
| | eth0: ethernet@15100000 |
| | press ctrl-c or t to go to uboot cmdline 0 new bootarg:ubi.mtd=ubi0 console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 init=/etc/preinit |
| | ubi0: attaching mtd3 |
| | ubi0: scanning is finished |
| | ubi0: attached mtd3 (name "ubi0", size 50 MiB) |
| | ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes |
| | ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 |
| | ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 |
| | ubi0: good PEBs: 400, bad PEBs: 0, corrupted PEBs: 0 |
| | ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 |
| | ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 302291140 |
| | ubi0: available PEBs: 176, total reserved PEBs: 224, PEBs reserved for bad PEB handling: 20 |
| | Reading from volume 'uboot' to 0x41dfffc0, size 0x0 ... OK |
| | Reading from volume 'rootfs' to 0x4a000000, size 0x0 ... OK |
| | Reading from volume 'kernel' to 0x46000000, size 0x0 ... OK |
| | ## Booting kernel from Legacy Image at 41dfffc0 ... |
| | Image Name: seconduboot |
| | Image Type: ARM Linux Standalone Program (uncompressed) |
| | Data Size: 747088 Bytes = 729.6 KiB |
| | Load Address: 00000000 |
| | Entry Point: 41e00000 |
| | Verifying Checksum ... OK |
| | Loading Standalone Program |
| | |
| | |
| | U-Boot 2022.01-rc4 (Sep 15 2022 - 20:54:19 +0800) |
| | |
| | CPU: MediaTek MT7986 |
| | Model: mt7986-rfb |
| | DRAM: 512 MiB |
| | MMC: mmc@11230000: 0 |
| | Loading Environment from MTD... spi-nand: spi_nand spi_nand@1: GigaDevice SPI NAND was found. |
| | spi-nand: spi_nand spi_nand@1: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 128 |
| | *** Warning - bad CRC, using default environment |
| | |
| | In: serial@11002000 |
| | Out: serial@11002000 |
| | Err: serial@11002000 |
| | Net: |
| | Warning: ethernet@15100000 (eth0) using random MAC address - 26:c7:77:6d:6d:53 |
| | eth0: ethernet@15100000 |
| | new bootarg:ubi.mtd=ubi0 console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 init=/etc/preinit |
| | second uboot to boot kernel @46000000 |
| | ## Loading kernel from FIT Image at 46000000 ... |
| | Using 'config-1' configuration |
| | Trying 'kernel-1' kernel subimage |
| | Description: ARM64 OpenWrt Linux-5.4.124 |
| | Type: Kernel Image |
| | Compression: lzma compressed |
| | Data Start: 0x460000e8 |
| | Data Size: 3200316 Bytes = 3.1 MiB |
| | Architecture: AArch64 |
| | OS: Linux |
| | Load Address: 0x48080000 |
| | Entry Point: 0x48080000 |
| | Hash algo: crc32 |
| | Hash value: 3261ac17 |
| | Hash algo: sha1 |
| | Hash value: f4dba8937ecd9002306d70e4be756e9f8224938f |
| | Verifying Hash Integrity ... crc32+ sha1+ OK |
| | ## Loading fdt from FIT Image at 46000000 ... |
| | Using 'config-1' configuration |
| | Trying 'fdt-1' fdt subimage |
| | Description: ARM64 OpenWrt mt7986b-ax6000-snand-rfb device tree blob |
| | Type: Flat Device Tree |
| | Compression: uncompressed |
| | Data Start: 0x4630d76c |
| | Data Size: 17611 Bytes = 17.2 KiB |
| | Architecture: AArch64 |
| | Hash algo: crc32 |
| | Hash value: 10a4903f |
| | Hash algo: sha1 |
| | Hash value: b26303dad8e480332accfafd1064715b52728d2e |
| | Verifying Hash Integrity ... crc32+ sha1+ OK |
| | Booting using the fdt blob at 0x4630d76c |
| | Uncompressing Kernel Image |
| | Loading Device Tree to 000000005f7f3000, end 000000005f7fa4ca ... OK |
| | |
| | Starting kernel ... |
| | |
| | [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] |
| | [ 0.000000] Linux version 5.4.124 (ubuntu@1da148b9d652) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r0-c067e3725)) #0 SMP Thu Aug 11 01:30:24 2022 |
| | [ 0.000000] Machine model: MediaTek MT7986b RFB |
| | [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000011002000 (options '') |
| | [ 0.000000] printk: bootconsole [uart8250] enabled |
| | [ 0.000000] On node 0 totalpages: 130064 |
| | [ 0.000000] DMA32 zone: 2048 pages used for memmap |
| | [ 0.000000] DMA32 zone: 0 pages reserved |
| | [ 0.000000] DMA32 zone: 130064 pages, LIFO batch:31 |
| | [ 0.000000] psci: probing for conduit method from DT. |
| | [ 0.000000] psci: PSCIv1.1 detected in firmware. |
| | [ 0.000000] psci: Using standard PSCI v0.2 function IDs |
| | [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. |
| | [ 0.000000] psci: SMC Calling Convention v1.0 |
| | [ 0.000000] percpu: Embedded 20 pages/cpu s44248 r8192 d29480 u81920 |
| | [ 0.000000] pcpu-alloc: s44248 r8192 d29480 u81920 alloc=20*4096 |
| | [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 |
| | [ 0.000000] Detected VIPT I-cache on CPU0 |
| | [ 0.000000] CPU features: detected: ARM erratum 845719 |
| | [ 0.000000] CPU features: detected: GIC system register CPU interface |
| | [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration |
| | [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 128016 |
| | [ 0.000000] Kernel command line: ubi.mtd=ubi0 console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 init=/etc/preinit |
| | [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) |
| | [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) |
| | [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off |
| | [ 0.000000] Memory: 492040K/520256K available (6462K kernel code, 482K rwdata, 1848K rodata, 448K init, 284K bss, 28216K reserved, 0K cma-reserved) |
| | [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| | [ 0.000000] rcu: Hierarchical RCU implementation. |
| | [ 0.000000] rcu: CONFIG_RCU_FANOUT set to non-default value of 32. |
| | [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. |
| | [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 |
| | [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode |
| | [ 0.000000] GICv3: 640 SPIs implemented |
| | [ 0.000000] GICv3: 0 Extended SPIs implemented |
| | [ 0.000000] GICv3: Distributor has no Range Selector support |
| | [ 0.000000] GICv3: 16 PPIs implemented |
| | [ 0.000000] GICv3: no VLPI support, no direct LPI support |
| | [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000 |
| | [ 0.000000] random: get_random_bytes called from start_kernel+0x2ec/0x438 with crng_init=0 |
| | [ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys). |
| | [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns |
| | [ 0.000002] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns |
| | [ 0.008167] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000) |
| | [ 0.018573] pid_max: default: 32768 minimum: 301 |
| | [ 0.023274] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) |
| | [ 0.030624] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) |
| | [ 0.039171] ASID allocator initialised with 65536 entries |
| | [ 0.044649] rcu: Hierarchical SRCU implementation. |
| | [ 0.049705] smp: Bringing up secondary CPUs ... |
| | [ 0.054472] Detected VIPT I-cache on CPU1 |
| | [ 0.054490] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000 |
| | [ 0.054509] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] |
| | [ 0.054775] Detected VIPT I-cache on CPU2 |
| | [ 0.054787] GICv3: CPU2: found redistributor 2 region 0:0x000000000c0c0000 |
| | [ 0.054797] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] |
| | [ 0.055017] Detected VIPT I-cache on CPU3 |
| | [ 0.055027] GICv3: CPU3: found redistributor 3 region 0:0x000000000c0e0000 |
| | [ 0.055035] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] |
| | [ 0.055069] smp: Brought up 1 node, 4 CPUs |
| | [ 0.111626] SMP: Total of 4 processors activated. |
| | [ 0.116347] CPU features: detected: 32-bit EL0 Support |
| | [ 0.121505] CPU features: detected: CRC32 instructions |
| | [ 0.126761] CPU: All CPU(s) started at EL2 |
| | [ 0.130877] alternatives: patching kernel code |
| | [ 0.137233] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns |
| | [ 0.147130] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) |
| | [ 0.154120] pinctrl core: initialized pinctrl subsystem |
| | [ 0.159828] NET: Registered protocol family 16 |
| | [ 0.164478] DMA: preallocated 256 KiB pool for atomic allocations |
| | [ 0.171015] cpuidle: using governor ladder |
| | [ 0.175144] cpuidle: using governor menu |
| | [ 0.186659] cryptd: max_cpu_qlen set to 1000 |
| | [ 0.192115] SCSI subsystem initialized |
| | [ 0.195977] libata version 3.00 loaded. |
| | [ 0.200221] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512 |
| | [ 0.210431] rbus 18000000.wbsys: PCI host bridge to bus 0000:00 |
| | [ 0.216381] pci_bus 0000:00: root bus resource [mem 0x18000000-0x18ffffff] |
| | [ 0.223372] pci_bus 0000:00: root bus resource [bus 00-ff] |
| | [ 0.228881] pci_bus 0000:00: scanning bus |
| | [ 0.232916] pci 0000:00:00.0: [14c3:7986] type 00 class 0x000280 |
| | [ 0.238960] pci 0000:00:00.0: reg 0x10: [mem 0x18000000-0x1800000f 64bit] |
| | [ 0.245780] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x0000000f] |
| | [ 0.252078] pci 0000:00:00.0: reg 0x1c: [mem 0x00000000-0x0000000f] |
| | [ 0.258373] pci 0000:00:00.0: reg 0x20: [mem 0x00000000-0x0000000f] |
| | [ 0.264671] pci 0000:00:00.0: reg 0x24: [mem 0x00000000-0x0000000f] |
| | [ 0.271729] pci_bus 0000:00: fixups for bus |
| | [ 0.275932] pci_bus 0000:00: bus scan returning with max=00 |
| | [ 0.281786] clocksource: Switched to clocksource arch_sys_counter |
| | [ 0.288474] thermal_sys: Registered thermal governor 'fair_share' |
| | [ 0.288477] thermal_sys: Registered thermal governor 'bang_bang' |
| | [ 0.294607] thermal_sys: Registered thermal governor 'step_wise' |
| | [ 0.300638] thermal_sys: Registered thermal governor 'user_space' |
| | [ 0.306673] thermal_sys: Registered thermal governor 'power_allocator' |
| | [ 0.312979] NET: Registered protocol family 2 |
| | [ 0.323973] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) |
| | [ 0.331690] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) |
| | [ 0.340113] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) |
| | [ 0.347919] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) |
| | [ 0.355129] TCP: Hash tables configured (established 4096 bind 4096) |
| | [ 0.361565] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) |
| | [ 0.368135] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) |
| | [ 0.375210] NET: Registered protocol family 1 |
| | [ 0.379600] PCI: CLS 0 bytes, default 64 |
| | [ 0.384209] workingset: timestamp_bits=46 max_order=17 bucket_order=0 |
| | [ 0.393035] squashfs: version 4.0 (2009/01/31) Phillip Lougher |
| | [ 0.398897] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. |
| | [ 0.428269] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled |
| | [ 0.435194] printk: console [ttyS0] disabled |
| | [ 0.459599] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 11, base_baud = 2500000) is a ST16650V2 |
| | [ 0.468804] printk: console [ttyS0] enabled |
| | [ 0.468804] printk: console [ttyS0] enabled |
| | [ 0.477156] printk: bootconsole [uart8250] disabled |
| | [ 0.477156] printk: bootconsole [uart8250] disabled |
| | [ 0.487327] mtk_rng 1020f000.trng: registered RNG driver |
| | [ 0.487560] random: fast init done |
| | [ 0.496250] random: crng init done |
| | [ 0.500528] cacheinfo: Unable to detect cache hierarchy for CPU 0 |
| | [ 0.508422] loop: module loaded |
| | [ 0.512350] mt7986-pinctrl 1001f000.pinctrl: pin_config_set op failed for pin 36 |
| | [ 0.519726] mtk-spi 1100a000.spi: Error applying setting, reverse things back |
| | [ 0.527297] spi-nand spi0.1: GigaDevice SPI NAND was found. |
| | [ 0.532876] spi-nand spi0.1: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 128 |
| | [ 0.541157] 6 fixed-partitions partitions found on MTD device spi0.1 |
| | [ 0.547512] Creating 6 MTD partitions on "spi0.1": |
| | [ 0.552291] 0x000000000000-0x000000200000 : "boot" |
| | [ 0.559053] 0x000000200000-0x000000300000 : "u-boot-env" |
| | [ 0.565516] 0x000000300000-0x000003500000 : "ubi0" |
| | [ 0.609824] 0x000003500000-0x000006700000 : "ubi1" |
| | [ 0.654097] 0x000006700000-0x000006f00000 : "userconfig" |
| | [ 0.665980] 0x000006f00000-0x000007300000 : "tp_data" |
| | [ 0.674835] libphy: Fixed MDIO Bus: probed |
| | [ 0.690766] libphy: mdio: probed |
| | [ 0.738808] mtk_soc_eth 15100000.ethernet: generated random MAC address 16:81:e5:ed:7d:96 |
| | [ 0.747208] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc011780000, irq 120 |
| | [ 0.756339] mtk_soc_eth 15100000.ethernet: generated random MAC address a2:72:87:19:b6:31 |
| | [ 0.764677] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc011780000, irq 120 |
| | [ 0.773792] (unnamed net_device) (dummy): netif_napi_add() called with weight 256 |
| | [ 0.781436] i2c /dev entries driver |
| | [ 0.785868] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0) |
| | [ 0.793763] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com |
| | [ 0.822725] lp5523x 0-0032: device detection err: -6 |
| | [ 0.827844] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433,alg:7fcdfc00 |
| | [ 0.839643] exFAT: Version 1.3.0 |
| | [ 0.843074] GACT probability on |
| | [ 0.846207] Mirror/redirect action on |
| | [ 0.849859] u32 classifier |
| | [ 0.852559] input device check on |
| | [ 0.856204] Actions configured |
| | [ 0.859673] ipip: IPv4 and MPLS over IPv4 tunneling driver |
| | [ 0.865397] gre: GRE over IPv4 demultiplexor driver |
| | [ 0.870256] ip_gre: GRE over IPv4 tunneling driver |
| | [ 0.875618] Initializing XFRM netlink socket |
| | [ 0.880148] NET: Registered protocol family 10 |
| | [ 0.885304] Segment Routing with IPv6 |
| | [ 0.888986] NET: Registered protocol family 17 |
| | [ 0.893474] Bridge firewalling registered |
| | [ 0.897518] 8021q: 802.1Q VLAN Support v1.8 |
| | [ 1.120181] libphy: dsa slave smi: probed |
| | [ 1.125040] mt7530 mdio-bus:1f lan0 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY] |
| | [ 1.134454] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY] |
| | [ 1.143808] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY] |
| | [ 1.153146] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY] |
| | [ 1.161849] mt7530 mdio-bus:1f: configuring for fixed/2500base-x link mode |
| | [ 1.168973] DSA: tree 0 setup |
| | [ 1.169226] mt7530 mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/tx |
| | [ 1.172102] ubi0: attaching mtd2 |
| | [ 1.439605] ubi0: scanning is finished |
| | [ 1.450860] ubi0: attached mtd2 (name "ubi0", size 50 MiB) |
| | [ 1.456335] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes |
| | [ 1.463192] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 |
| | [ 1.469957] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 |
| | [ 1.476900] ubi0: good PEBs: 400, bad PEBs: 0, corrupted PEBs: 0 |
| | [ 1.482890] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 |
| | [ 1.490089] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 302291140 |
| | [ 1.499111] ubi0: available PEBs: 176, total reserved PEBs: 224, PEBs reserved for bad PEB handling: 20 |
| | [ 1.508485] ubi0: background thread "ubi_bgt0d" started, PID 699 |
| | [ 4.823115] block ubiblock0_2: created from ubi0:2(rootfs) |
| | [ 4.828584] ubiblock: device ubiblock0_2 (rootfs) set to be root filesystem |
| | [ 4.835537] hctosys: unable to open rtc device (rtc0) |
| | [ 4.840987] UBIFS (ubi0:2): static UBI volume - read-only mode |
| | [ 4.846815] UBIFS error (ubi0:2 pid 1): ubifs_mount: cannot mount read-write - read-only media |
| | [ 4.857959] VFS: Mounted root (squashfs filesystem) readonly on device 253:0. |
| | [ 4.865270] Freeing unused kernel memory: 448K |
| | [ 4.901822] Run /etc/preinit as init process |
| | [ 5.812749] tfat: module license 'Commercial. For support email exfat-support@tuxera.com' taints kernel. |
| | [ 5.822222] Disabling lock debugging due to kernel taint |
| | [ 5.832703] Tuxera FAT 12/16/32 driver version 3021.3.22.7_lite [Flags: R/W MODULE]. |
| | [ 5.840433] Built against headers 5.4.124 #0 SMP Wed Jan 19 07:45:33 2022 aarch64 |
| | [ 5.847900] Running on kernel 5.4.124 #0 SMP Thu Aug 11 01:30:24 2022 aarch64 |
| | [ 5.948728] Tuxera NTFS driver 3021.4.23.8_lite [Flags: R/W MODULE]. |
| | [ 5.955091] Built against headers 5.4.124 #0 SMP Wed Jan 19 07:45:33 2022 aarch64 |
| | [ 5.962556] Running on kernel 5.4.124 #0 SMP Thu Aug 11 01:30:24 2022 aarch64 |
| | [ 5.998744] Tuxera HFS+ driver 3021.5.18 |
| | [ 5.998751] Built against headers 5.4.124 #0 SMP Wed Jan 19 07:45:33 2022 aarch64 |
| | [ 6.010141] Running on kernel 5.4.124 #0 SMP Thu Aug 11 01:30:24 2022 aarch64 |
| | - preinit - |
| | - regular preinit - |
| | jffs2 not ready yet; using ramdisk |
| | ubi device is not attached, try to attach it now. |
| | [ 7.190929] ubi1: attaching mtd5 |
| | [ 7.215357] ubi1: scanning is finished |
| | [ 7.226532] ubi1: attached mtd5 (name "tp_data", size 4 MiB) |
| | [ 7.232182] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes |
| | [ 7.239034] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 |
| | [ 7.245803] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 |
| | [ 7.252746] ubi1: good PEBs: 32, bad PEBs: 0, corrupted PEBs: 0 |
| | [ 7.258644] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 |
| | [ 7.265847] ubi1: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 682472375 |
| | [ 7.274868] ubi1: available PEBs: 0, total reserved PEBs: 32, PEBs reserved for bad PEB handling: 10 |
| | [ 7.283982] ubi1: background thread "ubi_bgt1d" started, PID 1078 |
| | [ 7.290267] UBIFS (ubi1:0): Mounting in unauthenticated mode |
| | [ 7.296006] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 1084 |
| | [ 7.336311] UBIFS (ubi1:0): recovery needed |
| | [ 7.433053] UBIFS (ubi1:0): recovery completed |
| | [ 7.437542] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "tp_data" |
| | [ 7.445017] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes |
| | [ 7.454917] UBIFS (ubi1:0): FS size: 1269760 bytes (1 MiB, 10 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) |
| | [ 7.464899] UBIFS (ubi1:0): reserved for root: 59973 bytes (58 KiB) |
| | [ 7.471149] UBIFS (ubi1:0): media format: w5/r0 (latest is w5/r0), UUID BCFB1CE0-BA38-4F61-BFD5-EDD01DB8BDC2, small LPT model |
| | [USERDATA]: Foun[ 7.489069] ubi2: attaching mtd4 |
| | d userconfig partition on MTD devide 4, attach it. |
| | [ 7.534626] ubi2: scanning is finished |
| | [ 7.545841] ubi2: attached mtd4 (name "userconfig", size 8 MiB) |
| | [ 7.551742] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes |
| | [ 7.558606] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 |
| | [ 7.565376] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096 |
| | [ 7.572319] ubi2: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 |
| | [ 7.578217] ubi2: user volume: 2, internal volumes: 1, max. volumes count: 128 |
| | [ 7.585422] ubi2: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 792061674 |
| | [ 7.594444] ubi2: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 20 |
| | [ 7.603561] ubi2: background thread "ubi_bgt2d" started, PID 1088 |
| | [USERDATA]: MTD4 attach succ. |
| | [USERDATA]: Mounting user_data1 UBI volume as UB[ 7.616410] UBIFS (ubi2:0): Mounting in unauthenticated mode |
| | IFS |
| | [ 7.623285] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1093 |
| | [ 7.663894] UBIFS (ubi2:0): recovery needed |
| | [ 7.759351] UBIFS (ubi2:0): recovery completed |
| | [ 7.763829] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "user_data1" |
| | [ 7.771550] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes |
| | [ 7.781443] UBIFS (ubi2:0): FS size: 1269760 bytes (1 MiB, 10 LEBs), journal size 1396736 bytes (1 MiB, 11 LEBs) |
| | [ 7.791594] UBIFS (ubi2:0): reserved for root: 0 bytes (0 KiB) |
| | [ 7.797414] UBIFS (ubi2:0): media format: w4/r0 (latest is w5/r0), UUID DDDD57BB-F03B-4E9B-8DE7-09C3945FDF3D, small LPT model |
| | [USERDATA]: Mounting user_data2 [ 7.816150] UBIFS (ubi2:1): Mounting in unauthenticated mode |
| | UBI volume as UB[ 7.822124] UBIFS (ubi2:1): background thread "ubifs_bgt2_1" started, PID 1098 |
| | IFS |
| | [ 7.862750] UBIFS (ubi2:1): recovery needed |
| | [ 7.982709] UBIFS (ubi2:1): recovery completed |
| | [ 7.987178] UBIFS (ubi2:1): UBIFS: mounted UBI device 2, volume 1, name "user_data2" |
| | [ 7.994907] UBIFS (ubi2:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes |
| | [ 8.004800] UBIFS (ubi2:1): FS size: 1269760 bytes (1 MiB, 10 LEBs), journal size 1396736 bytes (1 MiB, 11 LEBs) |
| | [ 8.014950] UBIFS (ubi2:1): reserved for root: 0 bytes (0 KiB) |
| | [ 8.020764] UBIFS (ubi2:1): media format: w4/r0 (latest is w5/r0), UUID A5E4F04B-7D26-4539-ACB6-44EF2CD32DD9, small LPT model |
| | - init - |
| | |
| | Please press Enter to activate this console. [ 8.096808] MTD: MTD device with name "data" not found |
| | [ 8.101992] MTD: Couldn't look up 'mtd:data': -2 |
| | [ 8.288193] ntfs: driver 2.1.32 [Flags: R/O MODULE]. |
| | [ 8.359937] NET: Registered protocol family 15 |
| | [ 8.384359] PPP generic driver version 2.4.2 |
| | [ 8.414578] tun: Universal TUN/TAP device driver, 1.6 |
| | [ 8.426741] PPP MPPE Compression module registered |
| | [ 8.484243] l2tp_core: L2TP core driver, V2.0 |
| | [ 8.492313] l2tp_netlink: L2TP netlink interface |
| | [ 8.511638] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver |
| | [ 8.546783] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) |
| | [ 8.628067] NET: Registered protocol family 24 |
| | [ 8.636183] PPTP driver version 0.8.5 |
| | [ 8.741946] l2tp_ppp: PPPoL2TP kernel driver, V2.0 |
| | [ 8.943325] nf_conntrack_rtsp v0.7 loading |
| | [ 8.950971] nf_nat_rtsp v0.7 loading |
| | [ 9.104537] fuse: init (API version 7.31) |
| | [ 9.143194] conninfra@(mtk_conninfra_drv_init:644) Before platform_driver_register |
| | [ 9.150842] Get Index(0-TOP_MISC_BASE) phy_addr(0x11d10000) vir_addr=(0xffffffc010a55000) size=(0x1000) |
| | [ 9.160223] Get Index(1-TOPRGU_BASE) phy_addr(0x1001c000) vir_addr=(0xffffffc010a6d000) size=(0x1000) |
| | [ 9.169421] Get Index(2-GPIO_BASE) phy_addr(0x1001f000) vir_addr=(0xffffffc010a85000) size=(0x1000) |
| | [ 9.178446] Get Index(3-IOCFG_TR_BASE) phy_addr(0x11f00000) vir_addr=(0xffffffc010a95000) size=(0x1000) |
| | [ 9.187817] Get Index(4-IOCFG_TL_BASE) phy_addr(0x11f10000) vir_addr=(0xffffffc010a9d000) size=(0x1000) |
| | [ 9.197188] Get Index(5-INFRACFG_AO_BASE) phy_addr(0x10003000) vir_addr=(0xffffffc010aa5000) size=(0x1000) |
| | [ 9.206818] Get Index(6-CONN_INFRA_CFG_BASE) phy_addr(0x18001000) vir_addr=(0xffffffc010aad000) size=(0x1000) |
| | [ 9.216709] Get Index(7-CONN_INFRA_SYSRAM_BASE) phy_addr(0x18050000) vir_addr=(0xffffffc010ab5000) size=(0x1000) |
| | [ 9.226860] Get Index(8-CONN_INFRA_CLKGEN_ON_TOP_BASE) phy_addr(0x18009000) vir_addr=(0xffffffc010abd000) size=(0x1000) |
| | [ 9.237618] Get Index(9-CONN_HOST_CSR_TOP_BASE) phy_addr(0x18060000) vir_addr=(0xffffffc010ac5000) size=(0x1000) |
| | [ 9.247768] Get Index(10-CONN_INFRA_BUS_CR_BASE) phy_addr(0x1800e000) vir_addr=(0xffffffc010acd000) size=(0x1000) |
| | [ 9.258005] Get Index(11-CONN_INFRA_RGU_BASE) phy_addr(0x18000000) vir_addr=(0xffffffc010ad5000) size=(0x1000) |
| | [ 9.267983] Get Index(12-CONN_WT_SLP_CTL_REG_BASE) phy_addr(0x18005000) vir_addr=(0xffffffc010add000) size=(0x1000) |
| | [ 9.278393] Get Index(13-INST2_CONN_WT_SLP_CTL_REG_BASE) phy_addr(0x18085000) vir_addr=(0xffffffc010ae5000) size=(0x1000) |
| | [ 9.289323] Get Index(14-CONN_RF_SPI_MST_REG_BASE) phy_addr(0x18004000) vir_addr=(0xffffffc010aed000) size=(0x1000) |
| | [ 9.299733] Get Index(15-INST2_CONN_RF_SPI_MST_REG_BASE) phy_addr(0x18084000) vir_addr=(0xffffffc010af5000) size=(0x1000) |
| | [ 9.310666] Get Index(16-CONN_SEMAPHORE_BASE) phy_addr(0x18070000) vir_addr=(0xffffffc010be0000) size=(0x10000) |
| | [ 9.320731] Get Index(17-CONN_AFE_CTL_BASE) phy_addr(0x18003000) vir_addr=(0xffffffc010af7000) size=(0x1000) |
| | [ 9.330534] Get Index(18-CONN_AFE_CTL_2ND_BASE) phy_addr(0x18083000) vir_addr=(0xffffffc010af9000) size=(0x1000) |
| | [ 9.340685] Get Index(19-WF_TOP_SLPPROT_ON_BASE) phy_addr(0x184c0000) vir_addr=(0xffffffc010e40000) size=(0x10000) |
| | [ 9.351009] Get Index(20-WF_TOP_CFG_BASE) phy_addr(0x184b0000) vir_addr=(0xffffffc010b04000) size=(0x1000) |
| | [ 9.360638] Get Index(21-WF_MCU_CONFIG_LS_BASE) phy_addr(0x184f0000) vir_addr=(0xffffffc010b0d000) size=(0x1000) |
| | [ 9.370788] Get Index(22-WF_MCU_BUS_CR_BASE) phy_addr(0x18400000) vir_addr=(0xffffffc010b5d000) size=(0x1000) |
| | [ 9.380678] Get Index(23-WF_MCUSYS_INFRA_BUS_FULL_U_DEBUG_CTRL_AO_BASE) phy_addr(0x18500000) vir_addr=(0xffffffc010b65000) size=(0x1000) |
| | [ 9.392913] Get Index(24-WF_TOP_CFG_ON_BASE) phy_addr(0x184c0000) vir_addr=(0xffffffc010e60000) size=(0x10000) |
| | [ 9.402897] conninfra@(FlashRead:106) Can't get mtd device! |
| | [ 9.408448] eeFlashId(0x0) isn't match with 0x7986! |
| | [ 9.408449] Flash content is empty, so use AX6000 configuration by default! |
| | [ 9.414265] conninfra@(consys_plt_hw_init:230) adie_cfg_type = 2, one_adie_dbdc = 0 |
| | [ 9.429795] [emi_mng_init] gConEmiPhyBase = [0x4fc00000] size = [0x100000] fw size = [0x100000] ops=[000000008d06f1ad] |
| | [ 9.440532] conninfra@(mtk_conninfra_drv_init:650) After platform_driver_register |
| | [ 9.448362] ConnInfra Dev: init (0) |
| | [ 9.453352] conninfra@(_consys_polling_chipid_int:459) Read CONNSYS HW IP version successfully! (0x02070000) |
| | [ 9.463176] conninfra@(consys_bus_clock_ctrl:485) drv=[4] conninfra_bus_clock_wpll=[0]->[16] enable |
| | [ 9.472204] conninfra@(connsys_d_die_cfg:530) D-die efuse: 0x00000000 |
| | [ 9.479656] conninfra@(_connsys_a_die_chip_id_confirm:1915) adie_idx[0]: A-die CHIP ID = 0x7975, HW Version = 0x8a02 |
| | [ 9.491162] conninfra@(_connsys_a_die_chip_id_confirm:1915) adie_idx[1]: A-die CHIP ID = 0x7975, HW Version = 0x8a02 |
| | [ 9.503673] conninfra@(consys_spi_write_nolock:670) addr = 0x0a00, val = 0xffffffff |
| | [ 9.513317] conninfra@(consys_spi_write_nolock:670) addr = 0x0a1c, val = 0x30000a8a |
| | [ 9.521955] conninfra@(consys_spi_write_nolock:670) addr = 0x0144, val = 0x00000002 |
| | [ 9.531599] conninfra@(consys_spi_write_nolock:670) addr = 0x0148, val = 0x00000000 |
| | [ 9.541246] conninfra@(consys_spi_write_nolock:670) addr = 0x0148, val = 0x43a60000 |
| | [ 9.554922] conninfra@(connsys_a_die_efuse_read_nolock:906) efuse = [0x0000aa02, 0x00c00100, 0x008400b4, 0x00000000] |
| | [ 9.566423] conninfra@(consys_spi_write_nolock:670) addr = 0x0144, val = 0x00000002 |
| | [ 9.576071] conninfra@(consys_spi_write_nolock:670) addr = 0x0148, val = 0x23a60036 |
| | [ 9.585718] conninfra@(consys_spi_write_nolock:670) addr = 0x0148, val = 0x63a70036 |
| | [ 9.599393] conninfra@(connsys_a_die_efuse_read_nolock:906) efuse = [0x0000aa02, 0x00c00100, 0x008400b4, 0x00000000] |
| | [ 9.610893] conninfra@(consys_spi_write_nolock:670) addr = 0x0144, val = 0x00000002 |
| | [ 9.620540] conninfra@(consys_spi_write_nolock:670) addr = 0x0148, val = 0x23a70036 |
| | [ 9.630187] conninfra@(consys_spi_write_nolock:670) addr = 0x0148, val = 0x63a50036 |
| | [ 9.643863] conninfra@(connsys_a_die_efuse_read_nolock:906) efuse = [0x0000aa02, 0x00c00100, 0x008400b4, 0x00000000] |
| | [ 9.654357] conninfra@(_connsys_a_die_form_patch_7975:1164) Form 7975 adie Patch |
| | [ 9.662735] conninfra@(consys_spi_write_nolock:670) addr = 0x0348, val = 0x00000002 |
| | [ 9.671372] conninfra@(consys_spi_write_nolock:670) addr = 0x0378, val = 0x00000002 |
| | [ 9.680013] conninfra@(consys_spi_write_nolock:670) addr = 0x03a8, val = 0x00000002 |
| | [ 9.688653] conninfra@(consys_spi_write_nolock:670) addr = 0x03d8, val = 0x00000002 |
| | [ 9.697293] conninfra@(consys_spi_write_nolock:670) addr = 0x0a1c, val = 0x30000aaa |
| | [ 9.705934] conninfra@(consys_spi_write_nolock:670) addr = 0x0a84, val = 0x8470008a |
| | [ 9.714575] conninfra@(consys_spi_write_nolock:670) addr = 0x0074, val = 0x00000002 |
| | [ 9.723215] conninfra@(consys_spi_write_nolock:670) addr = 0x0aa4, val = 0x01001fc0 |
| | [ 9.731853] conninfra@(consys_spi_write_nolock:670) addr = 0x0070, val = 0x00000005 |
| | [ 9.740489] conninfra@(consys_spi_write_nolock:670) addr = 0x0344, val = 0x00000088 |
| | [ 9.749130] conninfra@(consys_spi_write_nolock:670) addr = 0x0374, val = 0x00000088 |
| | [ 9.757770] conninfra@(consys_spi_write_nolock:670) addr = 0x03a4, val = 0x00000088 |
| | [ 9.766410] conninfra@(consys_spi_write_nolock:670) addr = 0x03d4, val = 0x00000088 |
| | [ 9.775050] conninfra@(consys_spi_write_nolock:670) addr = 0x0a80, val = 0x44d07000 |
| | [ 9.783691] conninfra@(consys_spi_write_nolock:670) addr = 0x0a88, val = 0x3900aaaa |
| | [ 9.792329] conninfra@(consys_spi_write_nolock:670) addr = 0x02c4, val = 0x00000000 |
| | [ 9.800965] conninfra@(consys_spi_write_nolock:670) addr = 0x02c8, val = 0x00000072 |
| | [ 9.810615] conninfra@(consys_spi_write_nolock:670) addr = 0x0a00, val = 0xffffffff |
| | [ 9.820262] conninfra@(consys_spi_write_nolock:670) addr = 0x0a1c, val = 0x30000a8a |
| | [ 9.828903] conninfra@(consys_spi_write_nolock:670) addr = 0x0144, val = 0x00000002 |
| | [ 9.838550] conninfra@(consys_spi_write_nolock:670) addr = 0x0148, val = 0x00000000 |
| | [ 9.848198] conninfra@(consys_spi_write_nolock:670) addr = 0x0148, val = 0x43a60000 |
| | [ 9.861873] conninfra@(connsys_a_die_efuse_read_nolock:906) efuse = [0x0000a902, 0x00c00100, 0x008400b4, 0x00000000] |
| | [ 9.873374] conninfra@(consys_spi_write_nolock:670) addr = 0x0144, val = 0x00000002 |
| | [ 9.883018] conninfra@(consys_spi_write_nolock:670) addr = 0x0148, val = 0x23a60036 |
| | [ 9.892662] conninfra@(consys_spi_write_nolock:670) addr = 0x0148, val = 0x63a70036 |
| | [ 9.906334] conninfra@(connsys_a_die_efuse_read_nolock:906) efuse = [0x0000a902, 0x00c00100, 0x008400b4, 0x00000000] |
| | [ 9.917835] conninfra@(consys_spi_write_nolock:670) addr = 0x0144, val = 0x00000002 |
| | [ 9.927481] conninfra@(consys_spi_write_nolock:670) addr = 0x0148, val = 0x23a70036 |
| | [ 9.937128] conninfra@(consys_spi_write_nolock:670) addr = 0x0148, val = 0x63a50036 |
| | [ 9.950803] conninfra@(connsys_a_die_efuse_read_nolock:906) efuse = [0x0000a902, 0x00c00100, 0x008400b4, 0x00000000] |
| | [ 9.961297] conninfra@(_connsys_a_die_form_patch_7975:1164) Form 7975 adie Patch |
| | [ 9.969677] conninfra@(consys_spi_write_nolock:670) addr = 0x0348, val = 0x00000002 |
| | [ 9.978318] conninfra@(consys_spi_write_nolock:670) addr = 0x0378, val = 0x00000002 |
| | [ 9.986958] conninfra@(consys_spi_write_nolock:670) addr = 0x03a8, val = 0x00000002 |
| | [ 9.995599] conninfra@(consys_spi_write_nolock:670) addr = 0x03d8, val = 0x00000002 |
| | [ 10.004238] conninfra@(consys_spi_write_nolock:670) addr = 0x0a1c, val = 0x30000aaa |
| | [ 10.012879] conninfra@(consys_spi_write_nolock:670) addr = 0x0a84, val = 0x8470008a |
| | [ 10.021516] conninfra@(consys_spi_write_nolock:670) addr = 0x0074, val = 0x00000002 |
| | [ 10.030156] conninfra@(consys_spi_write_nolock:670) addr = 0x0aa4, val = 0x01001fc0 |
| | [ 10.038797] conninfra@(consys_spi_write_nolock:670) addr = 0x0070, val = 0x00000005 |
| | [ 10.047437] conninfra@(consys_spi_write_nolock:670) addr = 0x0344, val = 0x00000088 |
| | [ 10.056078] conninfra@(consys_spi_write_nolock:670) addr = 0x0374, val = 0x00000088 |
| | [ 10.064719] conninfra@(consys_spi_write_nolock:670) addr = 0x03a4, val = 0x00000088 |
| | [ 10.073359] conninfra@(consys_spi_write_nolock:670) addr = 0x03d4, val = 0x00000088 |
| | [ 10.081997] conninfra@(consys_spi_write_nolock:670) addr = 0x0a80, val = 0x44d07000 |
| | [ 10.090634] conninfra@(consys_spi_write_nolock:670) addr = 0x0a88, val = 0x3900aaaa |
| | [ 10.099274] conninfra@(consys_spi_write_nolock:670) addr = 0x02c4, val = 0x00000000 |
| | [ 10.107914] conninfra@(consys_spi_write_nolock:670) addr = 0x02c8, val = 0x00000072 |
| | [ 10.116556] conninfra@(consys_spi_write_nolock:670) addr = 0x0070, val = 0x80000000 |
| | [ 10.126155] conninfra@(consys_spi_write_nolock:670) addr = 0x0070, val = 0x00000005 |
| | [ 10.134798] conninfra@(consys_spi_write_nolock:670) addr = 0x0070, val = 0x80000000 |
| | [ 10.144397] conninfra@(consys_spi_write_nolock:670) addr = 0x0070, val = 0x00000005 |
| | [ 10.152977] conninfra@(_consys_polling_chipid_int:459) Read CONNSYS HW IP version successfully! (0x02070000) |
| | [ 10.162780] conninfra@(_consys_hw_conninfra_wakeup:470) conninfra_wakeup refcnt=[0]->[1] wakeup!! |
| | [ 10.171634] conninfra@(_consys_hw_conninfra_sleep:490) conninfra_sleep refcnt=[1]->[0] sleep!! |
| | [ 10.180224] conninfra@(opfunc_power_on_internal:241) [Conninfra Pwr On] BT=[0] FM=[0] GPS=[0] WF=[0] CONNINFRA=[1] |
| | [ 10.212132] mediatek_soc_hnat 15100000.hnat: wan = eth1 |
| | [ 10.217346] mediatek_soc_hnat 15100000.hnat: lan = lan |
| | [ 10.222473] mediatek_soc_hnat 15100000.hnat: ppd = eth0 |
| | [ 10.227679] mediatek_soc_hnat 15100000.hnat: gmac num = 2 |
| | [ 10.233063] mediatek_soc_hnat 15100000.hnat: ppe num = 1 |
| | [ 10.238781] mediatek_soc_hnat 15100000.hnat: PPE0 entry number = 8192 |
| | [ 10.245577] mediatek_soc_hnat 15100000.hnat: PPE0 hwnat start |
| | [ 10.251358] hnat roaming work enable |
| | [ 11.497511] conninfra@(conninfra_pwr_on:120) [conninfra_pwr_on] drv=[3] |
| | [ 11.505065] conninfra@(_consys_polling_chipid_int:459) Read CONNSYS HW IP version successfully! (0x02070000) |
| | [ 11.522909] Adie Type: 0x7975 |
| | [ 11.522911] SKU Type: 6000 |
| | [ 11.526818] conninfra@(opfunc_power_on_internal:241) [Conninfra Pwr On] BT=[0] FM=[0] GPS=[0] WF=[1] CONNINFRA=[1] |
| | [ 11.540871] WiFi@C12L1,get_dbg_setting_by_profile() 4238: debug level setting=INDEX0_debug_level not found!! |
| | [ 11.550693] WiFi@C12L1,get_dbg_setting_by_profile() 4261: debug option setting=INDEX0_debug_option not found!! |
| | [ 11.560722] mt_rbus 0000:00:00.0: runtime IRQ mapping not provided by arch |
| | [ 11.574506] mt7986_init()--> |
| | [ 11.577400] sku:0xd, ADIE=MT7975 |
| | [ 11.581739] mt7986_init(), vlan2ethctrl:1 |
| | [ 11.585831] <--mt7986_init() |
| | [ 11.588723] RtmpRaDevCtrlInit(): MCS_LUT not used becasue MacTb size(544) > 128! |
| | [ 11.596207] WiFi@C12L1,match_index_by_chipname() 507: not find chip name INDEX1 |
| | [ 11.603517] WiFi@C12L1,match_index_by_chipname() 507: not find chip name INDEX2 |
| | [ 11.610817] WiFi@C12L1,match_index_by_chipname() 507: not find chip name INDEX3 |
| | [ 11.618120] WiFi@C12L1,match_index_by_chipname() 507: not find chip name INDEX4 |
| | [ 11.625424] WiFi@C12L1,match_index_by_chipname() 507: not find chip name INDEX5 |
| | [ 11.632728] WiFi@C12L1,match_index_by_chipname() 507: not find chip name INDEX6 |
| | [ 11.640027] WiFi@C12L1,match_index_by_chipname() 507: not find chip name INDEX7 |
| | [ 11.647331] WiFi@C12L1,match_index_by_chipname() 507: not find chip name INDEX8 |
| | [ 11.654635] WiFi@C12L1,match_index_by_chipname() 507: not find chip name INDEX9 |
| | [ 11.661926] WiFi@C12L2,match_index_by_chipname() 512: Not find slot id, back to old rule. |
| | [ 11.670173] msta_ifname not found |
| | [ 11.717651] warp_module_init(): module init and register callback for warp |
| | [ 11.724560] create warp_ctrl ok!!! |
| | [ 11.727982] wed_get_slot_map(): assign slot_id:0 for entry: 0! |
| | [ 11.733813] wed_get_slot_map(): assign slot_id:1 for entry: 1! |
| | [ 11.751406] mtk_warp_proxy: module uses symbols from proprietary module mt_wifi, inheriting taint. |
| | ------------------------------------------------------------------------------------- |
| | reloadprofile() begin |
| | reloadprofile() end |
| | ------------------------------------------------------------------------------------- |
| | ------------------------------------------------------------------------------------- |
| | reloadconfig() begin |
| | ................................load openvpn cert......................... |
| | ................................start of merge user and default........................ |
| | ................................parse userconf to get mode............................. |
| | ................................end of parse userconf.................................. |
| | ................................mode : router............................... |
| | ................................end of merge user and default.......................... |
| | ................................new configs merged..................................... |
| | reloadconfig() end |
| | ------------------------------------------------------------------------------------- |
| | ------------------------------------------------------------------------------------- |
| | ------------------------------------------------------------------------------------- |
| | ------------------------------------------------------------------------------------- |
| | ------------------------------------------------------------------------------------- |
| | ------------------------------------------------------------------------------------- |
| | ------------------------------------------------------------------------------------- |
| | agile config reload favicon and logo start! |
| | agile config reload favicon and logo end! |
| | 1 and 00 and 840 |
| | gmtoff: 1:00 and tz: -1:00 |
| | GMT-1:00 |
| | no need to generate onemesh group id |
| | wireless is starting... |
| | wifi_init |
| | config_profile_set, MacAddress=00:EB:D8:60:12:BE>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, WscManufacturer=Mercusys>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, WscDeviceName=MR90X 1.0.0>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, WscModelName=MR90X>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, WscModelNumber=1.0.0>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | [ 15.184928] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode |
| | [ 15.196691] device eth0 entered promiscuous mode |
| | [ 15.201845] mt7530 mdio-bus:1f lan0: configuring for phy/gmii link mode |
| | [ 15.208956] 8021q: adding VLAN 0 to HW filter on device lan0 |
| | [ 15.217406] br-lan: port 1(lan0) entered blocking state |
| | [ 15.222649] br-lan: port 1(lan0) entered disabled state |
| | config_profile_s[ 15.228198] device lan0 entered promiscuous mode |
| | et, WscSerialNumber=1.0.0>>/etc/wireless/mediatek/mt7986-ax6000.[ 15.239125] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode |
| | dbdc.b0.dat |
| | [ 15.246591] 8021q: adding VLAN 0 to HW filter on device lan1 |
| | [ 15.255229] br-lan: port 2(lan1) entered blocking state |
| | [ 15.260446] br-lan: port 2(lan1) entered disabled state |
| | [ 15.266241] device lan1 entered promiscuous mode |
| | [ 15.274891] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode |
| | config_profile_s[ 15.282176] 8021q: adding VLAN 0 to HW filter on device lan2 |
| | et, WSC_UUID_Str1=00000000-0000-[ 15.290980] br-lan: port 3(lan2) entered blocking state |
| | 1000-0000-00XXXX[ 15.296634] br-lan: port 3(lan2) entered disabled state |
| | XXXXXX>>/etc/wir[ 15.303899] device lan2 entered promiscuous mode |
| | eless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | [ 15.312687] mtk_soc_eth 15100000.ethernet eth1: configuring for fixed/2500base-x link mode |
| | config_profile_set, WSC_UUID_E1=0000000000001000000000XXXXXXXXXXXX>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, MacAddress=00:XX:XX:XX:XX:XX>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, WscManufacturer=Mercusys>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, WscDeviceName=MR90X 1.0.0>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, WscModelName=MR90X>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, WscModelNumber=1.0.0>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, WscSerialNumber=1.0.0>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, WSC_UUID_Str4=00000000-0000-1000-0000-00XXXXXXXXXX>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, WSC_UUID_E4=0000000000001000000000XXXXXXXXXX>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, CountryRegion=1>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, CountryNum=276>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, CountryCode=DE>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, AutoChannelSkipList=1;11;12;13>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, CountryNum=276>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, CountryCode=DE>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, CountryRegionABand=1>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, EDCCAEnable=1>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, EDCCAEnable=1>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, RDRegion=CE>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, SkuTableIdx=0>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, SkuTableIdx=0>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | wifi_reload_local |
| | wifi_shutdown_interface wifi0 |
| | ifconfig ra0 down |
| | wifi_config_profile wifi0 |
| | [ 16.543442] Lan Domain: tplinklogin.net |
| | [ 16.547282] Lan Domain: www.tplinklogin.net |
| | config_profile_set, WirelessMode=16>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, HT_BW=1>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, VHT_BW=0>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, HT_BSSCoexistence=1>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, Channel=0>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, AutoChannelSelect=3>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, MuOfdmaDlEnable=0>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, MuOfdmaUlEnable=0>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, TWTSupport=0>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, HT_GI=1>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, VHT_SGI=1>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, TxPower=100>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, VOW_Airtime_Fairness_En=0>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | config_profile_set, VOW_Sta_DWRR_Max_Wait_Time=1>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b0.dat |
| | wifi_shutdown_interface wifi1 |
| | wifi_config_profile wifi1 |
| | config_profile_set, WirelessMode=17>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, HT_BW=1>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, VHT_BW=2>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, Channel=0>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, AutoChannelSelect=3>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, AutoChannelSkipList=100;104;108;112;116;120;124;128;132;136;140>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, DfsEnable=1>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, IEEE80211H=1>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, DfsZeroWait=0>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, DfsDedicatedZeroWait=3>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, DfsZeroWaitDefault=0>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, MuOfdmaDlEnable=0>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, MuOfdmaUlEnable=0>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, TWTSupport=0>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, HT_GI=1>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, VHT_SGI=1>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, TxPower=100>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, VOW_Airtime_Fairness_En=0>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | config_profile_set, VOW_Sta_DWRR_Max_Wait_Time=1>>/etc/wireless/mediatek/mt7986-ax6000.dbdc.b1.dat |
| | Node 0, zone DMA32 227 221 72 25 12 2 2 2 0 0 84 |
| | wifi_start_interface wifi0 |
| | wifi_vap_local ra0 |
| | gp_id_rand = |
| | random_suffix = [ 18.893589] WiFi@C01L2,RTMP_COM_IoctlHandle() 1505: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT |
| | 5789 |
| | ifconfig r[ 18.902245] msta_ifname not found |
| | a0 up |
| | [ 18.907166] warp_cap_support(): chip_id=7986 is in WHNAT support list |
| | [ 18.913642] warp_entry_acquire(): bus slot:0, hook to WARP, entry id=0, entry: 000000001f3e536e |
| | [ 18.922334] client_hif_specific_get(): hw->base_phy_addr 0x18000000!! |
| | [ 18.928845] warp_entry_get_by_pdev(): return entry[0] |
| | [ 18.934081] warp_msg_register():warp,pid,5692,id,0,wed_idx,0 |
| | [ 18.939764] wed_init(0): res_start = 0x15010000, size = 1000, irq=6,base_addr=0xffffffc01249d000 |
| | [ 18.949006] wed_ring_init(): wed tx ring init result = 0 |
| | [ 18.954915] wed_ring_init(): wed rx ring init result = 0 |
| | [ 18.969327] create wed ok!!! |
| | [ 18.972292] wdma_init(): wdma(0) base_addr=0xffffffc0124dd800, base_phy_addr=0x15104800 |
| | [ 18.981095] warp_woif_bus_init_hw(): bus:00000000b175e992, txring: 20, pa: 0x0000000057b9a000, 0x0000000057b9a000, 24, 28, 3c |
| | [ 18.992414] warp_woif_bus_init_hw(): bus:00000000b175e992, rxring: 50, pa: 0x0000000057a42000, 0x0000000057a42000, 54, 58, 6c |
| | [ 19.003772] get_region_info(): wed_idx = 0, base_addr = 0x00000000092e2d7c, size = 0x40000, res.start = 0x4fd00000, shared:0 |
| | [ 19.015011] get_region_info(): wed_idx = 0, base_addr = 0x00000000ef42dcb6, size = 0x8000, res.start = 0x151e0000, shared:0 |
| | [ 19.026185] get_region_info(): wed_idx = 0, base_addr = 0x00000000bc5a0273, size = 0x240000, res.start = 0x4fd80000, shared:1 |
| | [ 19.037509] get_region_info(): wed_idx = 0, base_addr = 0x00000000b91b20cf, size = 0x1000, res.start = 0x15194000, shared:0 |
| | [ 19.048635] warp_fwdl_mcu_mode(): mcu mode, need fwdl |
| | [ 19.091320] ########## WO Firmware ########## |
| | [ 19.095737] Chip ID: 0x0000 |
| | [ 19.098521] ECO version:0 |
| | [ 19.101130] Version: DEV_000000 |
| | [ 19.104273] Build date: 20220527182301 |
| | [ 19.108013] Total region:3 |
| | [ 19.110706] ################################# |
| | [ 19.115079] Parsing tailer region 0 |
| | [ 19.118556] Target address: 0x151e0000 |
| | [ 19.122398] Download size: 20400 |
| | [ 19.125726] Parsing tailer region 1 |
| | [ 19.129200] Target address: 0x4fd00000 |
| | [ 19.133060] Download size: 87072 |
| | [ 19.136436] Parsing tailer region 2 |
| | [ 19.139911] Target address: 0x4fd80000 |
| | [ 19.143755] Download size: 2283984 |
| | [ 19.149035] warp_fwdl_ready_check_mcu_mode(): waiting for wocpu |
| | [ 19.171505] warp_fwdl_ready_check_mcu_mode(): wocpu is ready |
| | [ 19.177207] warp_woctrl_init_state(), wo_state: WO_STATE_ENABLE |
| | [ 19.183137] wo_proc_init done 00000000c5247668 |
| | [ 19.187657] wo_exep_proc_init done 00000000c5247668 |
| | [ 19.192658] wo_exception_init(0): exp log= 0x00000000e0c12306, phy_addr= 0x0000000057480000 size= 32768 |
| | [ 19.202164] warp_probe(): probe fail since warp is full! |
| | [ 19.207473] warp_dev0: probe of 15010000.wed2 failed with error -1 |
| | [ 19.218016] WiFi@C02L1,HwCtrlInit() 525: ser_init() return NDIS_STATUS_FAILURE |
| | [ 19.298756] WiFi@C12L1,RTMPWirelessModeCfg() 587: Init: BSS0 PhyMode=78 |
| | [ 19.305395] WiFi@C12L1,RTMPWirelessModeCfg() 587: Init: BSS1 PhyMode=78 |
| | [ 19.312025] WiFi@C12L1,RTMPWirelessModeCfg() 587: Init: BSS2 PhyMode=78 |
| | [ 19.318626] WiFi@C12L1,RTMPWirelessModeCfg() 587: Init: BSS3 PhyMode=177 |
| | [ 19.325347] WiFi@C12L1,RTMPWirelessModeCfg() 587: Init: BSS4 PhyMode=177 |
| | [ 19.332046] WiFi@C12L1,RTMPWirelessModeCfg() 587: Init: BSS5 PhyMode=177 |
| | [ 19.339051] WiFi@C23L2,auto_ch_select_set_cfg() 3481: BandIdx0, AutoChannelAtBootup=1, AutoChannelAlg = 3 |
| | [ 19.348627] WiFi@C23L2,auto_ch_select_set_cfg() 3481: BandIdx1, AutoChannelAtBootup=1, AutoChannelAlg = 3 |
| | [ 19.371469] WiFi@C12L1,SCS_Enable_set_cfg() 711: SCSEnable [0]= 1 |
| | [ 19.377590] WiFi@C12L1,SCS_Enable_set_cfg() 711: SCSEnable [1]= 1 |
| | [ 19.390695] I/F(ra0) GroupKey ReKeyInterval=86400 seconds |
| | [ 19.396105] I/F(ra1) GroupKey ReKeyInterval=86400 seconds |
| | [ 19.401487] I/F(ra2) GroupKey ReKeyInterval=86400 seconds |
| | [ 19.406888] I/F(ra3) GroupKey ReKeyInterval=86400 seconds |
| | [ 19.412283] I/F(ra4) GroupKey ReKeyInterval=86400 seconds |
| | [ 19.417667] I/F(ra5) GroupKey ReKeyInterval=86400 seconds |
| | [ 19.450976] WiFi@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=0, Desired MFPC=0 |
| | [ 19.458385] WiFi@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=1, Desired MFPC=0 |
| | [ 19.465791] WiFi@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=2, Desired MFPC=0 |
| | [ 19.473189] WiFi@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=3, Desired MFPC=0 |
| | [ 19.480565] WiFi@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=4, Desired MFPC=0 |
| | [ 19.487960] WiFi@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=5, Desired MFPC=0 |
| | [ 19.497469] WiFi@C12L1,RTMPSetProfileParameters() 8299: ra0, QoSMgmtCapa=0 |
| | [ 19.504367] WiFi@C12L1,RTMPSetProfileParameters() 8299: (null), QoSMgmtCapa=0 |
| | [ 19.511491] WiFi@C12L1,RTMPSetProfileParameters() 8299: (null), QoSMgmtCapa=0 |
| | [ 19.518623] WiFi@C12L1,RTMPSetProfileParameters() 8299: (null), QoSMgmtCapa=0 |
| | [ 19.525745] WiFi@C12L1,RTMPSetProfileParameters() 8299: (null), QoSMgmtCapa=0 |
| | [IPTV] WAN_PHY_I[ 19.532888] WiFi@C12L1,RTMPSetProfileParameters() 8299: (null), QoSMgmtCapa=0 |
| | F=eth1 |
| | [IPTV] LAN_PHY_IF=lan1 lan2 lan0 |
| | [ 19.547059] WiFi@C12L1,rtmp_read_ap_client_from_file() 1605: APCLI[0] ApCliMuMimoDlEnable = 0 |
| | [ 19.555601] WiFi@C12L1,rtmp_read_ap_client_from_file() 1605: APCLI[1] ApCliMuMimoDlEnable = 0 |
| | [ 19.564290] WiFi@C12L1,rtmp_read_ap_client_from_file() 1624: APCLI[0] ApCliMuMimoUlEnable = 0 |
| | [ 19.572812] WiFi@C12L1,rtmp_read_ap_client_from_file() 1624: APCLI[1] ApCliMuMimoUlEnable = 0 |
| | [ 19.583229] WiFi@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD |
| | [ 19.594427] WiFi@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 48 |
| | [ 19.602879] WiFi@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD |
| | [ 19.614096] WiFi@C03L2,AndesSendCmdMsg() 765: Command type = ed, Extension command type = 48 |
| | [ 19.627440] WiFi@C23L2,read_vht_param_from_file() 2670: [DFS_ZDFS_ENHANCE], Pre CH: 0, Pre BW: 0, Pre CAC done: 0 |
| | [ 19.637717] WiFi@C23L2,read_vht_param_from_file() 2670: [DFS_ZDFS_ENHANCE], Pre CH: 0, Pre BW: 0, Pre CAC done: 0 |
| | [ 19.647989] WiFi@C23L2,read_vht_param_from_file() 2670: [DFS_ZDFS_ENHANCE], Pre CH: 0, Pre BW: 0, Pre CAC done: 0 |
| | [ 19.722462] BandIdx = 0, tpcDutyInitFlag=1 |
| | [ 19.726551] BandIdx = 1, tpcDutyInitFlag=1 |
| | [ 19.730813] BandIdx = 0, tpcnitFlag=1 |
| | [ 19.734474] BandIdx = 1, tpcnitFlag=1 |
| | [ 19.738308] BandIdx = 0, tpcDuty=100-60-40-20 |
| | [ 19.742660] BandIdx = 1, tpcDuty=100-60-40-20 |
| | [ 19.747182] BandIdx = 0, thermalHighEn=1 |
| | [ 19.751086] BandIdx = 1, thermalHighEn=1 |
| | [ 19.755183] BandIdx = 0, thermalHighCritera=122 |
| | [ 19.759694] BandIdx = 1, thermalHighCritera=122 |
| | [ 19.764397] BandIdx = 0, thermalLowEn=1 |
| | [ 19.768215] BandIdx = 1, thermalLowEn=1 |
| | [ 19.772236] BandIdx = 0, thermalLowCritera=115 |
| | [ 19.776665] BandIdx = 1, thermalLowCritera=115 |
| | [ 19.781279] BandIdx = 0, thermalRecheckTime=5 |
| | [ 19.785652] BandIdx = 1, thermalRecheckTime=5 |
| | [ 19.790184] BandIdx = 0, thermalRFOffEn=0 |
| | [ 19.794208] BandIdx = 1, thermalRFOffEn=0 |
| | [ 19.798394] BandIdx = 0, thermalRFOffCriteria=125 |
| | [ 19.803108] BandIdx = 1, thermalRFOffCriteria=125 |
| | [ 19.807987] BandIdx = 0, thermalUcType=1 |
| | [ 19.811909] BandIdx = 1, thermalUcType=1 |
| | [ 19.817781] wdma_dma_ctrl(): WDMA_GLO_CFG=50404e70, txrx = 0 |
| | [ 19.829568] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e70, txrx = 0 |
| | [ 19.843584] warp_tx_ring_init_hw(): configure ring 0 setting |
| | [ 19.849241] warp_tx_ring_init_hw(): wed:00000000af7b9108 wifi:00000000a938bbdb: 24420=565a0000,24424=2048,24428=0 |
| | [ 19.859503] warp_tx_ring_init_hw(): configure ring 1 setting |
| | [ 19.865155] warp_tx_ring_init_hw(): wed:00000000af7b9108 wifi:00000000a938bbdb: 24430=57500000,24434=2048,24438=0 |
| | [ 19.875539] set_rrocfg,0 |
| | [ 19.900925] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e74, txrx = 3 |
| | [ 19.906590] sku:0xd, ADIE=MT7975 |
| | [ 19.910931] using E1 ROM patch |
| | [ 19.913981] using E1 RAM |
| | [ 19.916510] current sync CR = 0x1 |
| | [ 19.920660] Built date: 20220819135650a |
| | [ 19.924614] Platform: ALPS |
| | [ 19.927406] HW/SW version: 0x8a108a10 |
| | [ 19.931144] Patch version: 0xffffffff |
| | [ 19.940679] current sync CR = 0x1 |
| | [ 20.107422] Chip ID: 0x0f |
| | [ 20.110127] Eco version: 0x00 |
| | [ 20.113253] Region number: 0x0b |
| | [ 20.116467] Format version: 0x02 |
| | [ 20.119766] Format flag: 0x01 |
| | [ 20.122817] Ram version: ____000000 |
| | [ 20.126381] Built date: 20220819135752 |
| | [ 20.130206] Common crc: 0x3d2c5016 |
| | [ 20.133693] Release info: header tag = 0, total length = 108 |
| | [ 20.139424] tag 1, padding length = 1, tag length = 103 |
| | [ 20.144722] payload: t-neptune-main-2111-7986-imp_backup_wk2213-MT7986_E1_ASIC_ROM_RAM_REBB_IMP_BACKUP_WK2213-20220819135053 |
| | [ 20.232387] Chip ID: 0x00 |
| | [ 20.235091] Eco version: 0x00 |
| | [ 20.238130] Region number: 0x03 |
| | [ 20.241341] Format version: 0x02 |
| | [ 20.244739] Format flag: 0x01 |
| | [ 20.247778] Ram version: DEV_000000 |
| | [ 20.251340] Built date: 20220708173610 |
| | [ 20.255173] Common crc: 0xaba989ae |
| | [ 20.258648] Release info: header tag = 0, total length = 0 |
| | [ 20.358024] current sync CR = 0x7 |
| | [ 20.361383] efuse_probe: efuse = deaddead |
| | [ 20.365431] rtmp_ee_load_from_bin::bin FileName = /tp_data/MT7986_EEPROM.bin, bin bak = /user_data1/MT7986_EEPROM.bin, use caled e2p file |
| | [ 20.379583] Load EEPROM Buffer from /tp_data/MT7986_EEPROM.bin |
| | [ 20.385463] rtmp_btn_load_from_bin::bin FileName = /tp_data/MT7986_BTNFLAG.bin, bin bak = /user_data1/MT7986_BTNFLAG.bin |
| | [ 20.396364] sku:0xd, ADIE=MT7975 |
| | [ 20.400712] sku:0xd, ADIE=MT7975 |
| | [ 20.455988] sku:0xd, ADIE=MT7975 |
| | [ 20.511177] WiFi@C02L1,is_cal_free_ic() 1022: iCal free |
| | [ 20.517269] sku:0xd, ADIE=MT7975 |
| | [ 23.861798] WiFi@C17L1,RTMPReadTxPwrPerRate() 450: (450): Don't Support this now! |
| | [ 23.869273] WiFi@C02L0,rc_radio_init() 706: radio_ctrl=000000002f0a7d46,Band=0,rfcap=1,channel=1,PhyMode=64 extCha=0xf |
| | [ 23.879973] WiFi@C02L0,rc_radio_init() 706: radio_ctrl=00000000fcae3931,Band=1,rfcap=2,channel=36,PhyMode=128 extCha=0xf |
| | [ 23.890865] WiFi@C01L1,AntCfgInit() 3071: Not support for HIF_MT yet! |
| | [ 23.910584] ch_switch_monitor_state_machine_init:: enter |
| | [ 23.915892] ch_switch_monitor_cfg_reset:: enter |
| | [ 23.920405] ch_switch_monitor_cfg_reset:: enter |
| | [ 23.925287] WiFi@C17L1,tx_pwr_comp_init() 641: NotSupportYet! |
| | [ 23.931055] WiFi@C12L1,SCS_init() 880: INIT SCSEnable [0]= 1 |
| | [ 23.936722] WiFi@C12L1,SCS_init() 887: INIT SCSEnable [1]= 1 |
| | [ 23.942474] WiFi@C03L1,MtCmdSetMacTxRx() 10214: (ret = 0) |
| | [ 23.947943] WiFi@C03L1,MtCmdSetMacTxRx() 10214: (ret = 0) |
| | [ 23.953515] WiFi@C14L1,IPMacTable_init() 348: IPMacTable already inited! |
| | [ 23.980307] wdma_dma_ctrl(): WDMA_GLO_CFG=58804e75, txrx = 3 |
| | [ 23.986077] WiFi@C03L1,MtCmdSetMacTxRx() 10214: (ret = 0) |
| | [ 23.991548] WiFi@C03L1,MtCmdSetMacTxRx() 10214: (ret = 0) |
| | [ 23.996992] WiFi@C00L1,set_ack_timeout_mode_byband() 13292: CTS/ACK Timeout Range should between [0xFFFF:0]!! |
| | [ 24.006890] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13380: DAT config band(0) cck_timeout Fail! |
| | [ 24.015572] WiFi@C00L1,set_ack_timeout_mode_byband() 13292: CTS/ACK Timeout Range should between [0xFFFF:0]!! |
| | [ 24.025490] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13391: DAT config band(0) ofdm_timeout Fail! |
| | [ 24.034262] WiFi@C00L1,set_ack_timeout_mode_byband() 13292: CTS/ACK Timeout Range should between [0xFFFF:0]!! |
| | [ 24.044155] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13402: DAT config band(0) ofdma_timeout Fail! |
| | [ 24.053010] WiFi@C00L1,set_ack_timeout_mode_byband() 13292: CTS/ACK Timeout Range should between [0xFFFF:0]!! |
| | [ 24.062901] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13380: DAT config band(1) cck_timeout Fail! |
| | [ 24.071573] WiFi@C00L1,set_ack_timeout_mode_byband() 13292: CTS/ACK Timeout Range should between [0xFFFF:0]!! |
| | [ 24.081483] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13391: DAT config band(1) ofdm_timeout Fail! |
| | [ 24.090250] WiFi@C00L1,set_ack_timeout_mode_byband() 13292: CTS/ACK Timeout Range should between [0xFFFF:0]!! |
| | [ 24.100145] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13402: DAT config band(1) ofdma_timeout Fail! |
| | [ 24.109039] mt_wifi_init: Band = 0, dutyLv0 = 100, dutyLv1 = 60, dutyLv2 = 40, dutyLv3 = 20 |
| | [ 24.117384] mt_wifi_init: Band = 0, high_en=1, high_thd = 122, low_en = 1, low_thd = 115, RFOFF_en = 0, RFOFF_th = 125, rec_timer = 5, Type = Duty Cycle |
| | [ 24.131046] mt_wifi_init: Band = 1, dutyLv0 = 100, dutyLv1 = 60, dutyLv2 = 40, dutyLv3 = 20 |
| | [ 24.139390] mt_wifi_init: Band = 1, high_en=1, high_thd = 122, low_en = 1, low_thd = 115, RFOFF_en = 0, RFOFF_th = 125, rec_timer = 5, Type = Duty Cycle |
| | [ 24.155205] WiFi@C00L2,dump_ht_cap() 29: Caller: dump_ht_cap+0x10/0x20 [mt_wifi] |
| | [ 24.163272] WiFi@C00L2,dump_ht_cap() 29: Caller: dump_ht_cap+0x10/0x20 [mt_wifi] |
| | [ 24.175233] :(op = 1) |
| | [ 24.182285] WiFi@C00L1,FastPathCheckMIC() 1010: (ret = 0)(op:1) |
| | [ 24.188189] WiFi@C00L2,red_tail_drop_init() 83: red_tail_drop_init: available token:8192, whnat_en:1 |
| | [ 24.197324] WiFi@C00L1,MtCmdCr4RedSet() 914: MtCmdCr4RedSet: (ret = 0) |
| | [ 24.203838] WiFi@C00L1,SendRedCmd() 1049: SendRedCmd:(ret = 1) |
| | [ 24.209799] WiFi@C01L2,RTMP_COM_IoctlHandle() 1482: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP |
| | [ 24.217798] WiFi@C01L2,wifi_sys_open() 832: wdev idx = 0 |
| | [ 24.223422] WiFi@C08L3,wifi_sys_op_lock() 791: wifi_sys_open+0x48/0x408 [mt_wifi](0): get wdev_op_lock. |
| | [ 24.232896] WiFi@C23L1,DfsBuildChannelList() 3432: [RDM]: wdev is not 5G. |
| | [ 24.239683] [RadarStateCheck] Zero Wait State: 0 |
| | [ 24.244318] phy_freq_adjust : no prim_ch value for adjust! |
| | [ 24.249975] WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xac/0x120 [mt_wifi] |
| | [ 24.258008] wdev_attr_update(): wdevId0 = 00:XX:XX:XX:XX:XX |
| | [ 24.263622] WiFi@C12L1,wifi_sys_open() 874: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0 |
| | [ 24.272591] WiFi@C08L3,hw_ctrl_flow_v2_open() 13: wdev_idx=0 |
| | [ 24.278406] WiFi@C08L3,wifi_sys_op_unlock() 806: release wdev_op_lock. |
| | [ 24.285025] WiFi@C23L1,HcGetBandByChannel() 1102: No hdev parking on channel:0, just return a default band_idx 0! |
| | [ 24.295283] WiFi@C02L2,AsicRadioOnOffCtrl() 2279: DbdcIdx=0 RadioOn |
| | [ 24.302062] mtk_band_steering_netlink_init 247 band steering netlink init ok |
| | [ 24.309211] WiFi@C00L0,ApAutoChannelAtBootUp() 301: -----------------> |
| | [ 24.315728] WiFi@C00L0,ApAutoChannelAtBootUp() 317: AutoChannelBootup[0] = 1 |
| | [ 24.322864] WiFi@C03L1,MtCmdSetMacTxRx() 10214: (ret = 0) |
| | [ 24.328405] WiFi@C03L1,MtCmdSetMacTxRx() 10214: (ret = 0) |
| | [ 24.333806] WiFi@C00L1,ApAutoChannelAtBootUp() 336: PhyMode: 78, ACSChStat:0 |
| | [ 24.341019] WiFi@C08L1,UpdateBeaconHandler() 1999: wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x10c/0x570 [mt_wifi])!! |
| | [ 24.353266] WiFi@C23L0,MTAPAutoSelectChannel() 2389: IsABand = 0, ChannelListNum = 9 |
| | [ 24.361083] WiFi@C00L1,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 24.370214] WiFi@C03L2,MtCmdChannelSwitch() 2530: ctrl_chl=2, ctrl_ch2=0, cent_ch=2 DBDCIdx=0, ChBand=0, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 24.401645] WiFi@C23L0,MTAPAutoSelectChannel() 2422: BandIdx = 0, pre_pcca_time = 7348 |
| | [ 24.622061] WiFi@C00L1,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 24.631190] WiFi@C03L2,MtCmdChannelSwitch() 2530: ctrl_chl=3, ctrl_ch2=0, cent_ch=3 DBDCIdx=0, ChBand=0, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 24.662541] WiFi@C23L0,MTAPAutoSelectChannel() 2422: BandIdx = 0, pre_pcca_time = 33687 |
| | [ 24.882084] WiFi@C00L1,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 24.891206] WiFi@C03L2,MtCmdChannelSwitch() 2530: ctrl_chl=4, ctrl_ch2=0, cent_ch=4 DBDCIdx=0, ChBand=0, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 24.922427] WiFi@C23L0,MTAPAutoSelectChannel() 2422: BandIdx = 0, pre_pcca_time = 66308 |
| | [ 25.142065] WiFi@C00L1,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 25.151186] WiFi@C03L2,MtCmdChannelSwitch() 2530: ctrl_chl=5, ctrl_ch2=0, cent_ch=5 DBDCIdx=0, ChBand=0, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 25.182735] WiFi@C23L0,MTAPAutoSelectChannel() 2422: BandIdx = 0, pre_pcca_time = 89971 |
| | [ 25.402064] WiFi@C00L1,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 25.411186] WiFi@C03L2,MtCmdChannelSwitch() 2530: ctrl_chl=6, ctrl_ch2=0, cent_ch=6 DBDCIdx=0, ChBand=0, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 25.442529] WiFi@C23L0,MTAPAutoSelectChannel() 2422: BandIdx = 0, pre_pcca_time = 116752 |
| | [ 25.662061] WiFi@C00L1,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 25.671181] WiFi@C03L2,MtCmdChannelSwitch() 2530: ctrl_chl=7, ctrl_ch2=0, cent_ch=7 DBDCIdx=0, ChBand=0, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 25.702536] WiFi@C23L0,MTAPAutoSelectChannel() 2422: BandIdx = 0, pre_pcca_time = 133619 |
| | [ 25.922065] WiFi@C00L1,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 25.931190] WiFi@C03L2,MtCmdChannelSwitch() 2530: ctrl_chl=8, ctrl_ch2=0, cent_ch=8 DBDCIdx=0, ChBand=0, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 25.962526] WiFi@C23L0,MTAPAutoSelectChannel() 2422: BandIdx = 0, pre_pcca_time = 150615 |
| | [ 26.182080] WiFi@C00L1,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 26.191202] WiFi@C03L2,MtCmdChannelSwitch() 2530: ctrl_chl=9, ctrl_ch2=0, cent_ch=9 DBDCIdx=0, ChBand=0, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 26.222550] WiFi@C23L0,MTAPAutoSelectChannel() 2422: BandIdx = 0, pre_pcca_time = 175113 |
| | [ 26.442082] WiFi@C00L1,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 26.451203] WiFi@C03L2,MtCmdChannelSwitch() 2530: ctrl_chl=10, ctrl_ch2=0, cent_ch=10 DBDCIdx=0, ChBand=0, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 26.482719] WiFi@C23L0,MTAPAutoSelectChannel() 2422: BandIdx = 0, pre_pcca_time = 197126 |
| | [ 26.702204] WiFi@C08L1,UpdateBeaconHandler() 1999: wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x2b8/0x570 [mt_wifi])!! |
| | [ 26.714483] WiFi@C23L0,SelectClearChannelBusyTime() 1855: [SelectClearChannelBusyTime] - band0 START |
| | [ 26.723651] WiFi@C23L0,SelectClearChannelBusyTime() 1856: [SelectClearChannelBusyTime] - cfg_ht_bw = 1 vht_bw = 0 |
| | [ 26.733895] WiFi@C23L0,SelectClearChannelBusyTime() 1863: ==================================================================== |
| | [ 26.745299] WiFi@C23L0,SelectClearChannelBusyTime() 1869: Channel 2 : Busy Time = 5992, Skip Channel = FALSE, BwCap = TRUE |
| | [ 26.756685] WiFi@C23L0,SelectClearChannelBusyTime() 1869: Channel 3 : Busy Time = 6679, Skip Channel = FALSE, BwCap = TRUE |
| | [ 26.768070] WiFi@C23L0,SelectClearChannelBusyTime() 1869: Channel 4 : Busy Time = 5245, Skip Channel = FALSE, BwCap = TRUE |
| | [ 26.779483] WiFi@C23L0,SelectClearChannelBusyTime() 1869: Channel 5 : Busy Time = 5308, Skip Channel = FALSE, BwCap = TRUE |
| | [ 26.790873] WiFi@C23L0,SelectClearChannelBusyTime() 1869: Channel 6 : Busy Time = 3538, Skip Channel = FALSE, BwCap = TRUE |
| | [ 26.802239] WiFi@C23L0,SelectClearChannelBusyTime() 1869: Channel 7 : Busy Time = 4245, Skip Channel = FALSE, BwCap = TRUE |
| | [ 26.813609] WiFi@C23L0,SelectClearChannelBusyTime() 1869: Channel 8 : Busy Time = 5258, Skip Channel = FALSE, BwCap = TRUE |
| | [ 26.825025] WiFi@C23L0,SelectClearChannelBusyTime() 1869: Channel 9 : Busy Time = 5122, Skip Channel = FALSE, BwCap = TRUE |
| | [ 26.836396] WiFi@C23L0,SelectClearChannelBusyTime() 1869: Channel 10 : Busy Time = 28193, Skip Channel = FALSE, BwCap = TRUE |
| | [ 26.847768] WiFi@C23L0,SelectClearChannelBusyTime() 1872: ==================================================================== |
| | [ 26.859172] WiFi@C23L0,SelectClearChannelBusyTime() 2142: Rule 3 Channel Busy time value : Select Primary Channel 6 |
| | [ 26.869604] WiFi@C23L0,SelectClearChannelBusyTime() 2144: Rule 3 Channel Busy time value : Min Channel Busy = 3538 |
| | [ 26.879983] WiFi@C23L0,SelectClearChannelBusyTime() 2149: Rule 3 Channel Busy time value : BW = 20 |
| | [ 26.888933] WiFi@C23L0,SelectClearChannelBusyTime() 2188: [SelectClearChannelBusyTime] - band0 END |
| | [ 26.897898] WiFi@C00L0,ApAutoChannelAtBootUp() 365: Auto channel selection: Selected channel = 6, IsAband = 0 |
| | [ 26.907894] WiFi@C00L1,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 26.917013] WiFi@C03L2,MtCmdChannelSwitch() 2530: ctrl_chl=6, ctrl_ch2=0, cent_ch=8 DBDCIdx=0, ChBand=0, BW=1, TXStream=4, RXStream=4, scan(0) |
| | [ 27.168147] WiFi@C12L0,ApAutoChannelAtBootUp() 504: Boot:1 Total:1 |
| | [ 27.174415] WiFi@C23L1,DfsBuildChannelList() 3432: [RDM]: wdev is not 5G. |
| | [ 27.181190] WiFi@C23L2,zero_wait_dfs_switch_ch() 779: outband ch 0, ch_stat 0 |
| | [ 27.188323] WiFi@C00L0,ApAutoChannelAtBootUp() 519: <----------------- |
| | [ 27.195015] WiFi@C08L2,APStartUpForMbss() 909: ===>(caller:ap_inf_open+0x198/0x590 [mt_wifi]), mbss_idx:0, CfgMode:0 |
| | [ 27.205527] WiFi@C15L2,APPMFInit() 133: [PMF] apidx=0, MFPC=0, MFPR=0, SHA256=0 |
| | [ 27.213110] WiFi@C00L2,dump_ht_cap() 29: Caller: dump_ht_cap+0x10/0x20 [mt_wifi] |
| | [ 27.220599] WiFi@C03L1,MtCmdSetMacTxRx() 10214: (ret = 0) |
| | [ 27.226134] WiFi@C03L1,MtCmdSetMacTxRx() 10214: (ret = 0) |
| | [ 27.231577] WiFi@C00L1,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 27.240703] WiFi@C03L2,MtCmdChannelSwitch() 2530: ctrl_chl=3, ctrl_ch2=0, cent_ch=3 DBDCIdx=0, ChBand=0, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 27.591867] WiFi@C00L1,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 27.600988] WiFi@C03L2,MtCmdChannelSwitch() 2530: ctrl_chl=4, ctrl_ch2=0, cent_ch=4 DBDCIdx=0, ChBand=0, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 27.951858] WiFi@C00L1,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 27.960979] WiFi@C03L2,MtCmdChannelSwitch() 2530: ctrl_chl=5, ctrl_ch2=0, cent_ch=5 DBDCIdx=0, ChBand=0, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 28.311858] WiFi@C00L1,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 28.320979] WiFi@C03L2,MtCmdChannelSwitch() 2530: ctrl_chl=6, ctrl_ch2=0, cent_ch=6 DBDCIdx=0, ChBand=0, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 28.671837] WiFi@C00L1,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 28.680964] WiFi@C03L2,MtCmdChannelSwitch() 2530: ctrl_chl=7, ctrl_ch2=0, cent_ch=7 DBDCIdx=0, ChBand=0, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 29.031875] WiFi@C00L1,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 29.040995] WiFi@C03L2,MtCmdChannelSwitch() 2530: ctrl_chl=8, ctrl_ch2=0, cent_ch=8 DBDCIdx=0, ChBand=0, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 29.401847] WiFi@C00L1,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 29.410968] WiFi@C03L2,MtCmdChannelSwitch() 2530: ctrl_chl=9, ctrl_ch2=0, cent_ch=9 DBDCIdx=0, ChBand=0, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 29.732159] WiFi@C08L1,UpdateBeaconHandler() 1999: wdev(0) bss not ready (state:0, caller:update_ap_qload_to_bcn+0xa0/0xc8 [mt_wifi])!! |
| | [ 29.761839] WiFi@C00L1,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 29.770956] WiFi@C03L2,MtCmdChannelSwitch() 2530: ctrl_chl=10, ctrl_ch2=0, cent_ch=10 DBDCIdx=0, ChBand=0, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 30.121858] WiFi@C00L1,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 30.130989] WiFi@C03L2,MtCmdChannelSwitch() 2530: ctrl_chl=11, ctrl_ch2=0, cent_ch=11 DBDCIdx=0, ChBand=0, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 30.481874] WiFi@C00L1,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 30.490997] WiFi@C03L2,MtCmdChannelSwitch() 2530: ctrl_chl=12, ctrl_ch2=0, cent_ch=12 DBDCIdx=0, ChBand=0, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 30.841861] WiFi@C00L1,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 30.850983] WiFi@C03L2,MtCmdChannelSwitch() 2530: ctrl_chl=13, ctrl_ch2=0, cent_ch=13 DBDCIdx=0, ChBand=0, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 31.201877] WiFi@C00L1,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 31.210997] WiFi@C03L2,MtCmdChannelSwitch() 2530: ctrl_chl=6, ctrl_ch2=0, cent_ch=8 DBDCIdx=0, ChBand=0, BW=1, TXStream=4, RXStream=4, scan(0) |
| | [ 31.462579] WiFi@C08L2,ap_link_up() 6989: (caller:wdev_do_linkup+0x20/0x38 [mt_wifi]), wdev(0) |
| | [ 31.471174] WiFi@C01L2,wifi_sys_linkup() 1133: wdev idx = 0 |
| | [ 31.477076] WiFi@C08L3,wifi_sys_op_lock() 791: wifi_sys_linkup+0x80/0x460 [mt_wifi](0): get wdev_op_lock. |
| | [ 31.486690] WiFi@C08L3,hw_ctrl_flow_v2_link_up() 72: wdev_idx=0 |
| | [ 31.496246] WiFi@C08L3,wifi_sys_op_unlock() 806: release wdev_op_lock. |
| | [ 31.502807] WiFi@C00L1,TxCCKStreamCtrl() 21252: set wrong parameters |
| | [ 31.518954] PrintSrCmd: |
| | [ 31.518954] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 |
| | [ 31.518954] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 |
| | [ 31.532946] PrintSrCmd: |
| | [ 31.532946] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 |
| | [ 31.532946] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 |
| | [ 31.546928] PrintSrCmd: |
| | [ 31.546928] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 |
| | [ 31.546928] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 |
| | [ 31.560901] PrintSrCmd: |
| | [ 31.560901] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 |
| | [ 31.560901] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 |
| | [ 31.574984] PrintSrCmd: |
| | [ 31.574984] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0 |
| | [ 31.574984] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 |
| | [ 31.589069] WiFi@C03L3,MtCmdTxPwrShowInfo() 13714: ucTxPowerInfoCatg: 2, BandIdx: 0 |
| | [ 31.596803] WiFi@C03L3,MtCmdTxPwrShowInfo() 13743: (ret = 0) |
| | [ 31.596897] [mtf_txpower_all_rate_info] band_idx:0 pwr:29 ChBand:2G ePAGain:0 |
| | [ 31.602460] mtk_ppe_dev_register_hook : ineterface ra0 register (1) |
| | iwpriv ra0 set SSID=MERCUSYS_12BE |
| | [ 31.672927] 7986@C08L3ra0,ap_mlme_deauth_req_action() 223: ---> wcid = 32767 |
| | [ 31.680187] 7986@C15L2ra0,APPMFInit() 133: [PMF] apidx=0, MFPC=0, MFPR=0, SHA256=0 |
| | [ 31.687822] 7986@C01L2ra0,wifi_sys_linkdown() 1257: wdev idx = 0 |
| | [ 31.688071] 7986@C03L2ra0,ExtEventBeaconLostHandler() 169: FW EVENT (00:XX:XX:XX:XX:XX), Reason 0x10 |
| | [ 31.694100] 7986@C08L3ra0,wifi_sys_op_lock() 791: wifi_sys_linkdown+0x58/0x378 [mt_wifi](0): get wdev_op_lock. |
| | [ 31.702938] 7986@C03L1ra0,ExtEventBeaconLostHandler() 175: AP Beacon OFF!!! |
| | [ 31.720065] 7986@C08L3ra0,hw_ctrl_flow_v2_link_down() 123: wdev_idx=0 |
| | [ 31.729482] 7986@C08L3ra0,wifi_sys_op_unlock() 806: release wdev_op_lock. |
| | [ 31.736279] WiFi@C01L2,wifi_sys_close() 912: wdev idx = 0 |
| | [ 31.741987] 7986@C08L3ra0,wifi_sys_op_lock() 791: wifi_sys_close+0x88/0x270 [mt_wifi](0): get wdev_op_lock. |
| | [ 31.751747] 7986@C08L3ra0,hw_ctrl_flow_v2_close() 41: wdev_idx=0 |
| | [ 31.757891] 7986@C08L3ra0,wifi_sys_op_unlock() 806: release wdev_op_lock. |
| | [ 31.764733] WiFi@C01L2,wifi_sys_open() 832: wdev idx = 0 |
| | [ 31.770299] 7986@C08L3ra0,wifi_sys_op_lock() 791: wifi_sys_open+0x48/0x408 [mt_wifi](0): get wdev_op_lock. |
| | [ 31.780172] 7986@C00L1ra0,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 31.789567] 7986@C03L2ra0,MtCmdChannelSwitch() 2530: ctrl_chl=6, ctrl_ch2=0, cent_ch=6 DBDCIdx=0, ChBand=0, BW=0, TXStream=4, RXStream=4, scan(0) |
| | [ 32.036181] WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xac/0x120 [mt_wifi] |
| | [ 32.044201] wdev_attr_update(): wdevId0 = 00:XX:XX:XX:XX:XX |
| | [ 32.049770] WiFi@C12L1,wifi_sys_open() 874: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0 |
| | [ 32.058814] 7986@C08L3ra0,hw_ctrl_flow_v2_open() 13: wdev_idx=0 |
| | [ 32.064865] 7986@C08L3ra0,wifi_sys_op_unlock() 806: release wdev_op_lock. |
| | [ 32.071640] 7986@C01L2ra0,wifi_sys_linkup() 1133: wdev idx = 0 |
| | [ 32.077803] 7986@C08L3ra0,wifi_sys_op_lock() 791: wifi_sys_linkup+0x80/0x460 [mt_wifi](0): get wdev_op_lock. |
| | [ 32.087702] 7986@C08L3ra0,hw_ctrl_flow_v2_link_up() 72: wdev_idx=0 |
| | [ 32.097515] 7986@C08L2ra0,bcn_buf_init() 170: BcnPkt is allocated!, bcn offload=1 |
| | [ 32.104988] 7986@C08L3ra0,wifi_sys_op_unlock() 806: release wdev_op_lock. |
| | [ 32.111784] 7986@C03L3ra0,bssUpdateHighPriRateEAPOL() 4043: bssUpdateHighPriRateEAPOL (BSS_INFO_HIGHPRI_INFO), CmdBssInfoHighPriRate.u2HighPriTransmit = 0 |
| | [ 32.125998] 7986@C03L3ra0,bssUpdateHighPriRateEAPOL() 4043: bssUpdateHighPriRateEAPOL (BSS_INFO_HIGHPRI_INFO), CmdBssInfoHighPriRate.u2HighPriTransmit = 0 |
| | [ 32.139955] 7986@C03L3ra0,bssUpdateHighPriRateEAPOL() 4043: bssUpdateHighPriRateEAPOL (BSS_INFO_HIGHPRI_INFO), CmdBssInfoHighPriRate.u2HighPriTransmit = 0 |
| | [ 32.153882] Set_HighPriMcs(): input param error |
| | [ 32.153882] Usage: iwpriv [inf] set HighPriMcs=[frame_type]-[mcs] |
| | [ 32.153882] The frame type format is 0 for ARP, 1 for DHCP, 2 for EAPOL |
| | [ 32.153882] MCS must in range of 0 ~ 3 and 8 ~ 11 for CCK Mode |
| | [ 32.153882] MCS must in range from 0 to 7 for OFDM Mode |
| | iwpriv ra0 set HideSSID=0 |
| | mumimo_config ra0 1 |
| | iwpriv ra0 set MuMimo=1 |
| | iw[ 32.188362] sync for : ra0 |
| | priv ra0 set BeaconPeriod=100 |
| | i[ 32.194088] Set_RTSThreshold_Proc: set wdev0 rts length threshold=2346(0x92a) |
| | [ 32.203490] Set_FragThreshold_Proc::set wdev0 FragThreshold=2346) |
| | |
| | iwpriv ra0 set FragThreshold=23[ 32.212864] 7986@C12L3ra0,Set_DtimPeriod_Proc() 13831: (i/f 0) (DtimPeriod=1) |
| | 46 |
| | [ 32.222299] WiFi@C00L2,dump_ht_cap() 29: Caller: dump_ht_cap+0x10/0x20 [mt_wifi] |
| | |
| | iwpriv ra0 set WmmCapable=1 |
| | iwpriv ra0 set NoForwarding=0 |
| | iwpriv ra0 set NoForwardingBTNBSSID=0 |
| | iwpriv ra0 set UAPSDCapable=1 |
| | killall -q -SIGINT rt2860apd |
| | iwpriv ra0 set AuthMode=WPA2PSK |
| | iwpriv ra0 set EncrypType=AES |
| | iwpriv ra0 set I[ 32.334387] 7986@C12L0ra0,Set_AP_RekeyInterval_Proc() 14578: I/F(ra0) GroupKey ReKeyInterval=0 seconds |
| | EEE8021X=0 |
| | iwpriv ra0 set RekeyInterval=0 |
| | iwpriv ra0 set WPAPSK=94502985 |
| | iwpriv ra0 set WscCo[ 32.352825] 7986@C12L1ra0,RTMPAPPrivIoctlSet() 3658: IOCTL::(iwpriv) Command not Support [WscLabelDisabled=0] |
| | nfMode=7 |
| | iwpriv ra0 set WscConfStatus=2 |
| | iwpriv ra0 set WscVendorPinCode=945029[ 32.368658] 7986@C08L3ra0,ap_mlme_deauth_req_action() 223: ---> wcid = 32767 |
| | 85 |
| | iwpriv ra0 s[ 32.377212] 7986@C15L2ra0,APPMFInit() 133: [PMF] apidx=0, MFPC=0, MFPR=0, SHA256=0 |
| | et WscLabelDisab[ 32.386075] 7986@C01L2ra0,wifi_sys_linkdown() 1257: wdev idx = 0 |
| | led=0 |
| | iwpriv ra[ 32.393581] 7986@C03L2ra0,ExtEventBeaconLostHandler() 169: FW EVENT (00:XX:XX:XX:XX:XX), Reason 0x10 |
| | 0 set WscSetupLo[ 32.403953] 7986@C03L1ra0,ExtEventBeaconLostHandler() 175: AP Beacon OFF!!! |
| | ck=0 |
| | iwpriv ra0[ 32.412744] 7986@C08L3ra0,wifi_sys_op_lock() 791: wifi_sys_linkdown+0x58/0x378 [mt_wifi](0): get wdev_op_lock. |
| | [ 32.423992] 7986@C08L3ra0,hw_ctrl_flow_v2_link_down() 123: wdev_idx=0 |
| | |
| | iwpriv ra0 set SSID=MERCUSYS_12BE |
| | [ 32.434626] 7986@C08L3ra0,wifi_sys_op_unlock() 806: release wdev_op_lock. |
| | [ 32.441548] WiFi@C01L2,wifi_sys_close() 912: wdev idx = 0 |
| | [ 32.447278] 7986@C08L3ra0,wifi_sys_op_lock() 791: wifi_sys_close+0x88/0x270 [mt_wifi](0): get wdev_op_lock. |
| | [ 32.457140] 7986@C08L3ra0,hw_ctrl_flow_v2_close() 41: wdev_idx=0 |
| | [ 32.463333] 7986@C08L3ra0,wifi_sys_op_unlock() 806: release wdev_op_lock. |
| | [ 32.470115] WiFi@C01L2,wifi_sys_open() 832: wdev idx = 0 |
| | [ 32.475792] 7986@C08L3ra0,wifi_sys_op_lock() 791: wifi_sys_open+0x48/0x408 [mt_wifi](0): get wdev_op_lock. |
| | [ 32.485722] WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xac/0x120 [mt_wifi] |
| | [ 32.493795] wdev_attr_update(): wdevId0 = 00:XX:XX:XX:XX:XX |
| | [ 32.499428] WiFi@C12L1,wifi_sys_open() 874: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0 |
| | [ 32.508402] 7986@C08L3ra0,hw_ctrl_flow_v2_open() 13: wdev_idx=0 |
| | [ 32.514540] 7986@C08L3ra0,wifi_sys_op_unlock() 806: release wdev_op_lock. |
| | [ 32.521320] 7986@C01L2ra0,wifi_sys_linkup() 1133: wdev idx = 0 |
| | [ 32.527598] 7986@C08L3ra0,wifi_sys_op_lock() 791: wifi_sys_linkup+0x80/0x460 [mt_wifi](0): get wdev_op_lock. |
| | [ 32.594050] 7986@C08L3ra0,hw_ctrl_flow_v2_link_up() 72: wdev_idx=0 |
| | [ 32.603911] 7986@C08L2ra0,bcn_buf_init() 170: BcnPkt is allocated!, bcn offload=1 |
| | [ 32.611390] 7986@C08L3ra0,wifi_sys_op_unlock() 806: release wdev_op_lock. |
| | [ 32.618250] 7986@C03L3ra0,bssUpdateHighPriRateEAPOL() 4043: bssUpdateHighPriRateEAPOL (BSS_INFO_HIGHPRI_INFO), CmdBssInfoHighPriRate.u2HighPriTransmit = 0 |
| | [ 32.632244] 7986@C03L3ra0,bssUpdateHighPriRateEAPOL() 4043: bssUpdateHighPriRateEAPOL (BSS_INFO_HIGHPRI_INFO), CmdBssInfoHighPriRate.u2HighPriTransmit = 0 |
| | [ 32.646238] 7986@C03L3ra0,bssUpdateHighPriRateEAPOL() 4043: bssUpdateHighPriRateEAPOL (BSS_INFO_HIGHPRI_INFO), CmdBssInfoHighPriRate.u2HighPriTransmit = 0 |
| | [ 32.660187] Set_HighPriMcs(): input param error |
| | [ 32.660187] Usage: iwpriv [inf] set HighPriMcs=[frame_type]-[mcs] |
| | [ 32.660187] The frame type format is 0 for ARP, 1 for DHCP, 2 for EAPOL |
| | [ 32.660187] MCS must in range of 0 ~ 3 and 8 ~ 11 for CCK Mode |
| | [ 32.660187] MCS must in range from 0 to 7 for OFDM Mode |
| | iwpriv ra0 set h[ 32.690093] mtk_ppe_dev_register_hook : ra0 has been registered in wifi_hook_if table[1] |
| | w_nat_register=1 |
| | brctl addif br-lan ra0 |
| | [ 32.711516] br-lan: port 4(ra0) entered blocking state |
| | [ 32.716685] br-lan: port 4(ra0) entered disabled state |
| | [ 32.722025] device ra0 entered promiscuous mode |
| | [ 32.726632] br-lan: port 4(ra0) entered blocking state |
| | [ 32.731762] br-lan: port 4(ra0) entered forwarding state |
| | [ 32.737199] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready |
| | brctl show br-lan |
| | brctl setifvlan br-lan lan0 3 1 |
| | brctl setifvlan br-lan lan1 3 1 |
| | brctl setifvlan br-lan lan2 3 1 |
| | brctl addif br-lan ra0 |
| | device ra0 is already a member of a bridge; can't ens[ 32.804751] br-lan: port 5(apcli0) entered blocking state |
| | lave it to bridg[ 32.810587] br-lan: port 5(apcli0) entered disabled state |
| | e br-lan. |
| | brctl[ 32.817623] device apcli0 entered promiscuous mode |
| | setifvlan br-lan ra0 3 1 |
| | brctl addif br-lan ra1 |
| | can't add ra1 to bridge br-lan: Invalid argument |
| | brctl setifvlan br-lan ra1 4 1 |
| | can't set ra1 vlan to bridge br-lan: Invalid argument |
| | brctl addif br-lan a[ 32.840657] br-lan: port 6(apclix0) entered blocking state |
| | pcli0 |
| | brctl set[ 32.847105] br-lan: port 6(apclix0) entered disabled state |
| | ifvlan br-lan ap[ 32.854148] device apclix0 entered promiscuous mode |
| | cli0 3 1 |
| | brctl addif br-lan rax0 |
| | can't add rax0 to bridge br-lan: Invalid argument |
| | brctl setifvlan br-lan rax0 3 1 |
| | can't set rax0 vlan to bridge br-lan: Invalid argument |
| | brctl addif br-lan rax1 |
| | can't add rax1 to bridge br-lan: Invalid argument |
| | brctl setifvlan br-lan rax1 8 1 |
| | can't set rax1 vlan to bridge br-lan: Invalid argument |
| | brctl addif br-lan apclix0 |
| | brctl setifvlan br-lan apclix0 3 1 |
| | wifi_vap_local ra1 |
| | gp_id_rand = |
| | random_suffix = 5789 |
| | brctl delif br-lan ra1 |
| | ifconfig ra1 down |
| | brctl show br-lan |
| | brctl setifvlan br-lan lan0 3 1 |
| | brctl setifvlan br-lan lan1 3 1 |
| | brctl setifvlan br-lan lan2 3 1 |
| | brctl addif br-lan ra0 |
| | device ra0 is already a member of a bridge; can't enslave it to bridge br-lan. |
| | brctl setifvlan br-lan ra0 3 1 |
| | brctl addif br-lan ra1 |
| | can't add ra1 to bridge br-lan: Invalid argument |
| | brctl setifvlan br-lan ra1 4 1 |
| | can't set ra1 vlan to bridge br-lan: Invalid argument |
| | brctl addif br-lan apcli0 |
| | device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan. |
| | brctl setifvlan br-lan apcli0 3 1 |
| | brctl addif br-lan rax0 |
| | can't add rax0 to bridge br-lan: Invalid argument |
| | brctl setifvlan br-lan rax0 3 1 |
| | can't set rax0 vlan to bridge br-lan: Invalid argument |
| | brctl addif br-lan rax1 |
| | can't add rax1 to bridge br-lan: Invalid argument |
| | brctl setifvlan br-lan rax1 8 1 |
| | can't set rax1 vlan to bridge br-lan: Invalid argument |
| | brctl addif br-lan apclix0 |
| | device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan. |
| | brctl setifvlan br-lan apclix0 3 1 |
| | wifi_vap_local apcli0 |
| | gp_id_rand = |
| | random_suffix = [ 33.518756] device apcli0 left promiscuous mode |
| | 5789 |
| | brctl deli[ 33.524368] br-lan: port 5(apcli0) entered disabled state |
| | f br-lan apcli0 |
| | ifconfig apcli0 down |
| | wifi_macfilter |
| | iwpriv ra0 set AccessPolicy=0 |
| | iwpriv rax0 set [ 33.590744] 7986@C12L1rax0,rt28xx_ap_ioctl() 879: interface is down, cmd [8beb] return!!! |
| | AccessPolicy=0 |
| | brctl show br-lan |
| | brctl setifvlan br-lan lan0 3 1 |
| | brctl setifvlan br-lan lan1 3 1 |
| | brctl setifvlan br-lan lan2 3 1 |
| | brctl addif br-lan ra0 |
| | device ra0 is already a member of a bridge; can't enslave it to bridg[ 33.625171] br-lan: port 5(apcli0) entered blocking state |
| | e br-lan. |
| | brctl[ 33.631449] br-lan: port 5(apcli0) entered disabled state |
| | setifvlan br-la[ 33.638484] device apcli0 entered promiscuous mode |
| | n ra0 3 1 |
| | brctl addif br-lan ra1 |
| | can't add ra1 to bridge br-lan: Invalid argument |
| | brctl setifvlan br-lan ra1 4 1 |
| | can't set ra1 vlan to bridge br-lan: Invalid argument |
| | brctl addif br-lan apcli0 |
| | brctl setifvlan br-lan apcli0 3 1 |
| | brctl addif br-lan rax0 |
| | can't add rax0 to bridge br-lan: Invalid argument |
| | brctl setifvlan br-lan rax0 3 1 |
| | can't set rax0 vlan to bridge br-lan: Invalid argument |
| | brctl addif br-lan rax1 |
| | can't add rax1 to bridge br-lan: Invalid argument |
| | brctl setifvlan br-lan rax1 8 1 |
| | can't set rax1 vlan to bridge br-lan: Invalid argument |
| | brctl addif br-lan apclix0 |
| | device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan. |
| | brctl setifvlan br-lan apclix0 3 1 |
| | wifi_start_interface wifi1 |
| | wifi_vap_local rax0 |
| | gp_id_rand = |
| | random_suffix = 5789 |
| | ifconfig[ 33.934499] 7986@C08L2rax0,mbss_virtual_if_open() 134: ===> rax0 |
| | rax0 up |
| | [ 33.942011] 7986@C01L2rax0,RTMP_COM_IoctlHandle() 1505: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT |
| | [ 33.951219] 7986@C01L2rax0,RTMP_COM_IoctlHandle() 1482: -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP |
| | [ 33.959611] WiFi@C01L2,wifi_sys_open() 832: wdev idx = 3 |
| | [ 33.965365] 7986@C08L3rax0,wifi_sys_op_lock() 791: wifi_sys_open+0x48/0x408 [mt_wifi](3): get wdev_op_lock. |
| | [ 33.975281] [RadarStateCheck] Zero Wait State: 0 |
| | [ 33.979893] 7986@C23L2rax0,RadarStateCheck() 317: RD_NORMAL_MODE |
| | [ 33.987045] phy_freq_adjust : no prim_ch value for adjust! |
| | [ 33.992728] WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xac/0x120 [mt_wifi] |
| | [ 34.000718] wdev_attr_update(): wdevId3 = 00:XX:XX:XX:XX:XX |
| | [ 34.006344] WiFi@C12L1,wifi_sys_open() 874: wifi_sys_open():band1 group_idx[3]=4, bw_grp=16 omac=0 |
| | [ 34.015349] 7986@C08L3rax0,hw_ctrl_flow_v2_open() 13: wdev_idx=3 |
| | [ 34.022591] 7986@C08L3rax0,wifi_sys_op_unlock() 806: release wdev_op_lock. |
| | [ 34.029487] 7986@C23L1rax0,HcGetBandByChannel() 1102: No hdev parking on channel:0, just return a default band_idx 0! |
| | [ 34.040153] 7986@C02L2rax0,AsicRadioOnOffCtrl() 2279: DbdcIdx=0 RadioOn |
| | [ 34.047508] mtk_band_steering_netlink_init 247 band steering netlink init ok |
| | [ 34.054730] 7986@C00L0rax0,ApAutoChannelAtBootUp() 301: -----------------> |
| | [ 34.061594] 7986@C00L0rax0,ApAutoChannelAtBootUp() 317: AutoChannelBootup[1] = 1 |
| | [ 34.069139] 7986@C03L1rax0,MtCmdSetMacTxRx() 10214: (ret = 0) |
| | [ 34.075008] 7986@C03L1rax0,MtCmdSetMacTxRx() 10214: (ret = 0) |
| | [ 34.080744] 7986@C00L1rax0,ApAutoChannelAtBootUp() 336: PhyMode: 177, ACSChStat:0 |
| | [ 34.088304] 7986@C23L2rax0,AutoChSelBuildChannelListFor56G() 2785: ChListNum56G = 19 |
| | [ 34.096260] 7986@C08L1rax0,UpdateBeaconHandler() 1999: wdev(3) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x10c/0x570 [mt_wifi])!! |
| | [ 34.108878] 7986@C23L0rax0,MTAPAutoSelectChannel() 2389: IsABand = 1, ChannelListNum = 8 |
| | false 0 |
| | [ 34.117023] 7986@C00L1rax0,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 34.127252] 7986@C03L2rax0,MtCmdChannelSwitch() 2530: ctrl_chl=36, ctrl_ch2=0, cent_ch=36 DBDCIdx=1, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 34.169996] 7986@C23L0rax0,MTAPAutoSelectChannel() 2422: BandIdx = 1, pre_pcca_time = 5 |
| | [ 34.392167] 7986@C00L1rax0,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 34.401653] 7986@C03L2rax0,MtCmdChannelSwitch() 2530: ctrl_chl=40, ctrl_ch2=0, cent_ch=40 DBDCIdx=1, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 34.444528] 7986@C23L0rax0,MTAPAutoSelectChannel() 2422: BandIdx = 1, pre_pcca_time = 1584 |
| | ===>>>rftestflag=1!! |
| | [ 34.672078] 7986@C00L1rax0,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 34.681553] 7986@C03L2rax0,MtCmdChannelSwitch() 2530: ctrl_chl=44, ctrl_ch2=0, cent_ch=44 DBDCIdx=1, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 34.724034] 7986@C23L0rax0,MTAPAutoSelectChannel() 2422: BandIdx = 1, pre_pcca_time = 4856 |
| | [ 34.952081] 7986@C00L1rax0,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 34.961551] 7986@C03L2rax0,MtCmdChannelSwitch() 2530: ctrl_chl=48, ctrl_ch2=0, cent_ch=48 DBDCIdx=1, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 35.004126] 7986@C23L0rax0,MTAPAutoSelectChannel() 2422: BandIdx = 1, pre_pcca_time = 5319 |
| | [ 35.232086] 7986@C00L1rax0,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 35.241555] 7986@C03L2rax0,MtCmdChannelSwitch() 2530: ctrl_chl=52, ctrl_ch2=0, cent_ch=52 DBDCIdx=1, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 35.283665] 7986@C23L0rax0,MTAPAutoSelectChannel() 2422: BandIdx = 1, pre_pcca_time = 5433 |
| | [ 35.301793] BcnCheck start after 1500 ms (ra0) |
| | [ 35.306580] 7986@C08L1rax0,UpdateBeaconHandler() 1999: wdev(3) bss not ready (state:0, caller:update_ap_qload_to_bcn+0xa0/0xc8 [mt_wifi])!! |
| | add :!SSLv2 to uhttpd progress |
| | add :!SSLv3 to uhttpd progress |
| | add :!TLSv1 to uhttpd progress |
| | add :!RC4 to uhttpd progress |
| | [ 35.512111] 7986@C00L1rax0,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 35.521590] 7986@C03L2rax0,MtCmdChannelSwitch() 2530: ctrl_chl=56, ctrl_ch2=0, cent_ch=56 DBDCIdx=1, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 35.563587] 7986@C23L0rax0,MTAPAutoSelectChannel() 2422: BandIdx = 1, pre_pcca_time = 5441 |
| | [ 35.792089] 7986@C00L1rax0,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 35.801559] 7986@C03L2rax0,MtCmdChannelSwitch() 2530: ctrl_chl=60, ctrl_ch2=0, cent_ch=60 DBDCIdx=1, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 35.843579] 7986@C23L0rax0,MTAPAutoSelectChannel() 2422: BandIdx = 1, pre_pcca_time = 5444 |
| | [ 36.072095] 7986@C00L1rax0,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 36.081570] 7986@C03L2rax0,MtCmdChannelSwitch() 2530: ctrl_chl=64, ctrl_ch2=0, cent_ch=64 DBDCIdx=1, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1) |
| | [ 36.123780] 7986@C23L0rax0,MTAPAutoSelectChannel() 2422: BandIdx = 1, pre_pcca_time = 5446 |
| | [ 36.352202] 7986@C08L1rax0,UpdateBeaconHandler() 1999: wdev(3) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x2b8/0x570 [mt_wifi])!! |
| | [ 36.364798] 7986@C23L0rax0,SelectClearChannelBusyTime() 1855: [SelectClearChannelBusyTime] - band1 START |
| | [ 36.374280] 7986@C23L0rax0,SelectClearChannelBusyTime() 1856: [SelectClearChannelBusyTime] - cfg_ht_bw = 1 vht_bw = 2 |
| | [ 36.384869] 7986@C23L0rax0,SelectClearChannelBusyTime() 1863: ==================================================================== |
| | [ 36.396587] 7986@C23L0rax0,SelectClearChannelBusyTime() 1869: Channel 36 : Busy Time = 272, Skip Channel = FALSE, BwCap = TRUE |
| | [ 36.408300] 7986@C23L0rax0,SelectClearChannelBusyTime() 1869: Channel 40 : Busy Time = 737, Skip Channel = FALSE, BwCap = TRUE |
| | [ 36.420018] 7986@C23L0rax0,SelectClearChannelBusyTime() 1869: Channel 44 : Busy Time = 1, Skip Channel = FALSE, BwCap = TRUE |
| | [ 36.431746] 7986@C23L0rax0,SelectClearChannelBusyTime() 1869: Channel 48 : Busy Time = 28, Skip Channel = FALSE, BwCap = TRUE |
| | [ 36.443466] 7986@C23L0rax0,SelectClearChannelBusyTime() 1869: Channel 52 : Busy Time = 1, Skip Channel = FALSE, BwCap = TRUE |
| | [ 36.455181] 7986@C23L0rax0,SelectClearChannelBusyTime() 1869: Channel 56 : Busy Time = 0, Skip Channel = FALSE, BwCap = TRUE |
| | [ 36.466897] 7986@C23L0rax0,SelectClearChannelBusyTime() 1869: Channel 60 : Busy Time = 0, Skip Channel = FALSE, BwCap = TRUE |
| | [ 36.478622] 7986@C23L0rax0,SelectClearChannelBusyTime() 1869: Channel 64 : Busy Time = 0, Skip Channel = FALSE, BwCap = TRUE |
| | [ 36.490343] 7986@C23L0rax0,SelectClearChannelBusyTime() 1872: ==================================================================== |
| | [ 36.502061] 7986@C23L0rax0,SelectClearChannelBusyTime() 2137: Select Primary Channel 44 from bw160PreferCh[]! |
| | [ 36.511957] 7986@C23L0rax0,SelectClearChannelBusyTime() 2142: Rule 3 Channel Busy time value : Select Primary Channel 44 |
| | [ 36.522805] 7986@C23L0rax0,SelectClearChannelBusyTime() 2144: Rule 3 Channel Busy time value : Min Channel Busy = 737 |
| | [ 36.533398] 7986@C23L0rax0,SelectClearChannelBusyTime() 2149: Rule 3 Channel Busy time value : BW = 160 |
| | [ 36.542775] 7986@C23L0rax0,SelectClearChannelBusyTime() 2188: [SelectClearChannelBusyTime] - band1 END |
| | [ 36.552068] 7986@C00L0rax0,ApAutoChannelAtBootUp() 365: Auto channel selection: Selected channel = 44, IsAband = 1 |
| | [ 36.562397] 7986@C23L2rax0,Adj_ZeroWait_Status_Update() 890: [DFS_ZDFS_ENHANCE], Pre CH: 0, Pre BW: 0, Pre CAC done: 0 |
| | [ 36.573080] 7986@C12L0rax0,Adj_ZeroWait_Status_Update() 921: Adj_ZeroWait_Status_Update(921), Channel(44), OutBandCh(0), vht_bw(2), OutBandBw(0), BW160ZeroWaitState(0) |
| | [ 36.588007] 7986@C12L0rax0,Adj_ZeroWait_Status_Update() 993: Adj_ZeroWait_Status_Update(993), Channel(36), OutBandCh(44), vht_bw(1), OutBandBw(0), BW160ZeroWaitState(2) |
| | [ 36.603020] [RadarStateCheck] Zero Wait State: 2 |
| | [ 36.607621] 7986@C23L2rax0,RadarStateCheck() 317: RD_NORMAL_MODE |
| | [ 36.614765] 7986@C08L2rax0,DfsCacNormalStart() 3324: [RDM] TX80/RX160 mode, CAC 65 seconds start |
| | [ 36.623576] [MY_DBG] DfsCacNormalStart() pDot11h->RDMode=0 |
| | [ 36.629783] 7986@C00L1rax0,mt7986_apply_dpd_flatness_data() 619: eeprom 0x19a bit 0 is 0, do runtime cal |
| | [ 36.639259] 7986@C03L2rax0,MtCmdChannelSwitch() 2530: ctrl_chl=36, ctrl_ch2=0, cent_ch=42 DBDCIdx=1, ChBand=1, BW=2, TXStream=4, RXStream=4, scan(0) |
| | [ 36.892494] 7986@C08L2rax0,DfsCacNormalStart() 3324: [RDM] TX80/RX160 mode, CAC 65 seconds start |
| | [ 36.901265] [MY_DBG] DfsCacNormalStart() pDot11h->RDMode=0 |
| | [ 36.907455] 7986@C12L0rax0,ApAutoChannelAtBootUp() 504: Boot:1 Total:1 |
| | [ 36.913987] 7986@C23L2rax0,zero_wait_dfs_switch_ch() 779: outband ch 44, ch_stat 0 |
| | [ 36.921534] 7986@C23L2rax0,zero_wait_dfs_switch_ch() 786: bDedicatedZeroWaitDefault == 0 |
| | [ 36.929623] 7986@C00L0rax0,ApAutoChannelAtBootUp() 519: <----------------- |
| | [ 36.936660] 7986@C08L2rax0,APStartUpForMbss() 909: ===>(caller:ap_inf_open+0x198/0x590 [mt_wifi]), mbss_idx:3, CfgMode:0 |
| | [ 36.947520] 7986@C15L2rax0,APPMFInit() 133: [PMF] apidx=3, MFPC=0, MFPR=0, SHA256=0 |
| | [ 36.955360] WiFi@C00L2,dump_ht_cap() 29: Caller: dump_ht_cap+0x10/0x20 [mt_wifi] |
| | [ 36.962876] WiFi@C08L2,ap_link_up() 6989: (caller:wdev_do_linkup+0x20/0x38 [mt_wifi]), wdev(3) |
| | [ 36.971464] 7986@C01L2rax0,wifi_sys_linkup() 1133: wdev idx = 3 |
| | [ 36.977699] 7986@C08L3rax0,wifi_sys_op_lock() 791: wifi_sys_linkup+0x80/0x460 [mt_wifi](3): get wdev_op_lock. |
| | [ 36.987644] 7986@C08L3rax0,hw_ctrl_flow_v2_link_up() 72: wdev_idx=3 |
| | [ 36.997476] 7986@C08L3rax0,wifi_sys_op_unlock() 806: release wdev_op_lock. |
| | [ 37.016941] PrintSrCmd: |
| | [ 37.016941] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 |
| | [ 37.016941] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 |
| | [ 37.030921] PrintSrCmd: |
| | [ 37.030921] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 |
| | [ 37.030921] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 |
| | [ 37.044926] PrintSrCmd: |
| | [ 37.044926] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 |
| | [ 37.044926] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 |
| | [ 37.058904] PrintSrCmd: |
| | [ 37.058904] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 |
| | [ 37.058904] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1 |
| | [ 37.072975] PrintSrCmd: |
| | [ 37.072975] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0 |
| | [ 37.072975] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0 |
| | [ 37.087077] 7986@C03L3rax0,MtCmdTxPwrShowInfo() 13714: ucTxPowerInfoCatg: 2, BandIdx: 1 |
| | [ 37.095175] 7986@C03L3rax0,MtCmdTxPwrShowInfo() 13743: (ret = 0) |
| | [ 37.095268] [mtf_txpower_all_rate_info] band_idx:1 pwr:32 ChBand:5G ePAGain:0 |
| | [ 37.101175] mtk_ppe_dev_register_hook : ineterface rax0 register (2) |
| | SFE STARTED--- |
| | iwpriv rax0 set [ 37.166743] 7986@C08L3rax0,ap_mlme_deauth_req_action() 223: ---> wcid = 32767 |
| | SSID=MERCUSYS_12[ 37.174391] 7986@C15L2rax0,APPMFInit() 133: [PMF] apidx=3, MFPC=0, MFPR=0, SHA256=0 |
| | BE_5G |
| | [ 37.183245] 7986@C01L2rax0,wifi_sys_linkdown() 1257: wdev idx = 3 |
| | [ 37.183644] 7986@C03L2rax0,ExtEventBeaconLostHandler() 169: FW EVENT (00:XX:XX:XX:XX:XX), Reason 0x10 |
| | [ 37.190156] 7986@C08L3rax0,wifi_sys_op_lock() 791: wifi_sys_linkdown+0x58/0x378 [mt_wifi](3): get wdev_op_lock. |
| | [ 37.199060] 7986@C03L1rax0,ExtEventBeaconLostHandler() 175: AP Beacon OFF!!! |
| | [ 37.216400] 7986@C08L3rax0,hw_ctrl_flow_v2_link_down() 123: wdev_idx=3 |
| | [ 37.226000] 7986@C08L3rax0,wifi_sys_op_unlock() 806: release wdev_op_lock. |
| | [ 37.232938] WiFi@C01L2,wifi_sys_close() 912: wdev idx = 3 |
| | [ 37.238621] 7986@C08L3rax0,wifi_sys_op_lock() 791: wifi_sys_close+0x88/0x270 [mt_wifi](3): get wdev_op_lock. |
| | [ 37.248612] 7986@C08L3rax0,hw_ctrl_flow_v2_close() 41: wdev_idx=3 |
| | [ 37.254919] 7986@C08L3rax0,wifi_sys_op_unlock() 806: release wdev_op_lock. |
| | [ 37.261884] WiFi@C01L2,wifi_sys_open() 832: wdev idx = 3 |
| | [ 37.267492] 7986@C08L3rax0,wifi_sys_op_lock() 791: wifi_sys_open+0x48/0x408 [mt_wifi](3): get wdev_op_lock. |
| | [ 37.277466] 7986@C08L2rax0,DfsCacNormalStart() 3324: [RDM] TX80/RX160 mode, CAC 65 seconds start |
| | [ 37.286270] [MY_DBG] DfsCacNormalStart() pDot11h->RDMode=0 |
| | [ 37.292464] 7986@C08L2rax0,DfsCacNormalStart() 3324: [RDM] TX80/RX160 mode, CAC 65 seconds start |
| | [ 37.301256] [MY_DBG] DfsCacNormalStart() pDot11h->RDMode=0 |
| | [ 37.307671] WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xac/0x120 [mt_wifi] |
| | [ 37.315690] wdev_attr_update(): wdevId3 = 00:XX:XX:XX:XX:XX |
| | [ 37.321286] WiFi@C12L1,wifi_sys_open() 874: wifi_sys_open():band1 group_idx[3]=4, bw_grp=16 omac=0 |
| | [ 37.330281] 7986@C08L3rax0,hw_ctrl_flow_v2_open() 13: wdev_idx=3 |
| | [ 37.337502] 7986@C08L3rax0,wifi_sys_op_unlock() 806: release wdev_op_lock. |
| | [ 37.344399] 7986@C01L2rax0,wifi_sys_linkup() 1133: wdev idx = 3 |
| | [ 37.350623] 7986@C08L3rax0,wifi_sys_op_lock() 791: wifi_sys_linkup+0x80/0x460 [mt_wifi](3): get wdev_op_lock. |
| | [ 37.360645] 7986@C08L3rax0,hw_ctrl_flow_v2_link_up() 72: wdev_idx=3 |
| | [ 37.370613] 7986@C08L2rax0,bcn_buf_init() 170: BcnPkt is allocated!, bcn offload=1 |
| | [ 37.378255] 7986@C08L3rax0,wifi_sys_op_unlock() 806: release wdev_op_lock. |
| | iwpriv rax0 set HideSSID=0 |
| | mumimo_config rax0 1 |
| | iwpriv rax[ 37.390563] sync for : ra0 |
| | 0 set MuMimo=1 |
| | [ 37.394204] sync for : rax0 |
| | iwpriv rax0 set BeaconPeriod=100[ 37.399790] Set_RTSThreshold_Proc: set wdev3 rts length threshold=2346(0x92a) |
| | |
| | iwpriv rax0 set RTSThreshold=2[ 37.409219] Set_FragThreshold_Proc::set wdev3 FragThreshold=2346) |
| | 346 |
| | iwpriv rax0 set FragThresho[ 37.418879] 7986@C12L3rax0,Set_DtimPeriod_Proc() 13831: (i/f 3) (DtimPeriod=1) |
| | ld=2346 |
| | iwpriv rax0 set DtimPer[ 37.428245] WiFi@C00L2,dump_ht_cap() 29: Caller: dump_ht_cap+0x10/0x20 [mt_wifi] |
| | iod=1 |
| | smart_home_schedule reload_service |
| | iwpriv rax0 set WmmCapable=1 |
| | maclist_smart_home: |
| | iwpriv rax0 set NoForwarding=0 |
| | iwpriv rax0 set NoForwardingBTNBSSID=0 |
| | iwpriv rax0 set UAPSDCapable=1 |
| | #### no schedule client found in blacklist config #### |
| | Call smart_home_schedule and add it to crontabs |
| | start crond... |
| | killall -q -SIGINT rt2860apd_x |
| | iwpriv rax0 set AuthMode=WPA2PSK |
| | iwpriv rax0 set EncrypType=AES |
| | iwpriv rax0 se[ 37.534088] 7986@C12L0rax0,Set_AP_RekeyInterval_Proc() 14578: I/F(ra3) GroupKey ReKeyInterval=0 seconds |
| | t IEEE8021X=0 |
| | iwpriv rax0 set RekeyInterval=0 |
| | iwpriv rax0 set WPAPSK=94502985 |
| | create "/var/run/schedule_clien[ 37.553073] 7986@C12L1rax0,RTMPAPPrivIoctlSet() 3658: IOCTL::(iwpriv) Command not Support [WscLabelDisabled=0] |
| | t" |
| | iwpriv rax0 set WscConfMode=7 |
| | iwpriv rax0 set WscConfStatu[ 37.569163] 7986@C08L3rax0,ap_mlme_deauth_req_action() 223: ---> wcid = 32767 |
| | s=2 |
| | iwpriv rax0[ 37.577135] 7986@C15L2rax0,APPMFInit() 133: [PMF] apidx=3, MFPC=0, MFPR=0, SHA256=0 |
| | set WscVendorPi[ 37.586071] 7986@C01L2rax0,wifi_sys_linkdown() 1257: wdev idx = 3 |
| | nCode=94502985 |
| | [ 37.586246] 7986@C03L2rax0,ExtEventBeaconLostHandler() 169: FW EVENT (00:XX:XX:XX:XX:XX), Reason 0x10 |
| | old_maclist is n[ 37.593761] 7986@C08L3rax0,wifi_sys_op_lock() 791: wifi_sys_linkdown+0x58/0x378 [mt_wifi](3): get wdev_op_lock. |
| | [ 37.604048] 7986@C03L1rax0,ExtEventBeaconLostHandler() 175: AP Beacon OFF!!! |
| | |
| | iwpriv rax0 set[ 37.624107] 7986@C08L3rax0,hw_ctrl_flow_v2_link_down() 123: wdev_idx=3 |
| | WscLabelDisabled=0 |
| | iwpriv rax0 set WscSetupLoc[ 37.634949] 7986@C08L3rax0,wifi_sys_op_unlock() 806: release wdev_op_lock. |
| | k=0 |
| | iwpriv rax0[ 37.642991] WiFi@C01L2,wifi_sys_close() 912: wdev idx = 3 |
| | [ 37.650023] 7986@C08L3rax0,wifi_sys_op_lock() 791: wifi_sys_close+0x88/0x270 [mt_wifi](3): get wdev_op_lock. |
| | |
| | iwpriv rax0 set[ 37.661045] 7986@C08L3rax0,hw_ctrl_flow_v2_close() 41: wdev_idx=3 |
| | SSID=MERCUSYS_1[ 37.668554] 7986@C08L3rax0,wifi_sys_op_unlock() 806: release wdev_op_lock. |
| | 2BE_5G |
| | [ 37.676657] WiFi@C01L2,wifi_sys_open() 832: wdev idx = 3 |
| | [ 37.682901] 7986@C08L3rax0,wifi_sys_op_lock() 791: wifi_sys_open+0x48/0x408 [mt_wifi](3): get wdev_op_lock. |
| | [ 37.692708] 7986@C08L2rax0,DfsCacNormalStart() 3324: [RDM] TX80/RX160 mode, CAC 65 seconds start |
| | [ 37.701475] [MY_DBG] DfsCacNormalStart() pDot11h->RDMode=0 |
| | [ 37.707649] 7986@C08L2rax0,DfsCacNormalStart() 3324: [RDM] TX80/RX160 mode, CAC 65 seconds start |
| | [ 37.716415] [MY_DBG] DfsCacNormalStart() pDot11h->RDMode=0 |
| | [ 37.722782] WiFi@C00L2,dump_ht_cap() 29: Caller: wlan_operate_init+0xac/0x120 [mt_wifi] |
| | [ 37.730770] wdev_attr_update(): wdevId3 = 00:XX:XX:XX:XX:XX |
| | [ 37.736365] WiFi@C12L1,wifi_sys_open() 874: wifi_sys_open():band1 group_idx[3]=4, bw_grp=16 omac=0 |
| | [ 37.745321] 7986@C08L3rax0,hw_ctrl_flow_v2_open() 13: wdev_idx=3 |
| | [ 37.752465] 7986@C08L3rax0,wifi_sys_op_unlock() 806: release wdev_op_lock. |
| | [ 37.759326] 7986@C01L2rax0,wifi_sys_linkup() 1133: wdev idx = 3 |
| | [ 37.765528] 7986@C08L3rax0,wifi_sys_op_lock() 791: wifi_sys_linkup+0x80/0x460 [mt_wifi](3): get wdev_op_lock. |
| | [ 37.831995] 7986@C08L3rax0,hw_ctrl_flow_v2_link_up() 72: wdev_idx=3 |
| | [ 37.841859] 7986@C08L2rax0,bcn_buf_init() 170: BcnPkt is allocated!, bcn offload=1 |
| | [ 37.849411] 7986@C08L3rax0,wifi_sys_op_unlock() 806: release wdev_op_lock. |
| | iwpriv rax0 set hw_nat_register=[ 37.858074] mtk_ppe_dev_register_hook : ra0 has been registered in wifi_hook_if table[1] |
| | 1 |
| | [ 37.867651] mtk_ppe_dev_register_hook : rax0 has been registered in wifi_hook_if table[2] |
| | vpn client if off, exit |
| | brctl a[ 37.877629] br-lan: port 7(rax0) entered blocking state |
| | ddif br-lan rax0[ 37.884120] br-lan: port 7(rax0) entered disabled state |
| | |
| | [ 37.890858] device rax0 entered promiscuous mode |
| | [ 37.895627] br-lan: port 7(rax0) entered blocking state |
| | [ 37.900843] br-lan: port 7(rax0) entered forwarding state |
| | brctl show br-lan |
| | brctl setifvlan br-lan lan0 3 1 |
| | brctl setifvlan br-lan lan1 3 1 |
| | brctl setifvlan br-lan lan2 3 1 |
| | brctl addif br-lan ra0 |
| | device ra0 is already a member of a bridge; can't enslave it to bridge br-lan. |
| | brctl setifvlan br-lan ra0 3 1 |
| | brctl addif br-lan ra1 |
| | can't add ra1 to bridge br-lan: Invalid argument |
| | brctl setifvlan br-lan ra1 4 1 |
| | can't set ra1 vlan to bridge br-lan: Invalid argument |
| | brctl addif br-lan apcli0 |
| | device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan. |
| | brctl setifvlan br-lan apcli0 3 1 |
| | brctl addif br-lan rax0 |
| | device rax0 is already a member of a bridge; can't enslave it to bridge br-lan. |
| | brctl setifvlan br-lan rax0 3 1 |
| | brctl addif br-lan rax1 |
| | can't add rax1 to bridge br-lan: Invalid argument |
| | brctl setifvlan br-lan rax1 8 1 |
| | can't set rax1 vlan to bridge br-lan: Invalid argument |
| | brctl addif br-lan apclix0 |
| | device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan. |
| | brctl setifvlan br-lan apclix0 3 1 |
| | wifi_vap_local rax1 |
| | [del_tc_root] true true true true |
| | [ 38.091898] BcnCheck start after 4000 ms (ra0) |
| | QDMA fc reg's bit 16 should be 0 in pppq mode. |
| | hqos disable[ 38.124000] qdma_txq1: mark = 0x0 |
| | |
| | [ 38.127841] qdma_txq3: mark = 0x0 |
| | [ 38.131296] qdma_txq2: mark = 0x0 |
| | [ 38.135007] qdma_txq4: mark = 0x0 |
| | [ 38.138442] Per-port-per-queue mode is going to be enabled ! |
| | gp_id_rand = |
| | random_suffix = 5789 |
| | brctl delif br-lan rax1 |
| | ifconfig rax1 down |
| | brctl show br-lan |
| | brctl setifvlan br-lan lan0 3 1 |
| | brctl setifvlan br-lan lan1 3 1 |
| | brctl setifvlan br-lan lan2 3 1 |
| | brctl addif br-lan ra0 |
| | device ra0 is already a member of a bridge; can't enslave it to bridge br-lan. |
| | brctl setifvlan br-lan ra0 3 1 |
| | brctl addif br-lan ra1 |
| | can't add ra1 to bridge br-lan: Invalid argument |
| | brctl setifvlan br-lan ra1 4 1 |
| | can't set ra1 vlan to bridge br-lan: Invalid argument |
| | brctl addif br-lan apcli0 |
| | device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan. |
| | brctl setifvlan br-lan apcli0 3 1 |
| | brctl addif br-lan rax0 |
| | device rax0 is already a member of a bridge; can't enslave it to bridge br-lan. |
| | brctl setifvlan br-lan rax0 3 1 |
| | brctl addif br-lan rax1 |
| | can't add rax1 to bridge br-lan: Invalid argument |
| | brctl setifvlan br-lan rax1 8 1 |
| | can't set rax1 vlan to bridge br-lan: Invalid argument |
| | brctl addif br-lan apclix0 |
| | device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan. |
| | brctl setifvlan br-lan apclix0 3 1 |
| | wifi_vap_local apclix0 |
| | cwmp: stop cwmp |
| | gp_id_rand = |
| | random_suffix = [ 38.650409] device apclix0 left promiscuous mode |
| | 5789 |
| | brctl deli[ 38.656166] br-lan: port 6(apclix0) entered disabled state |
| | f br-lan apclix0 |
| | dhcp_hook_d not load |
| | ifconfig apclix0 down |
| | brctl show br-lan |
| | brctl setifvlan br-lan lan0 3 1 |
| | brctl setifvlan br-lan lan1 3 1 |
| | brctl setifvlan br-lan lan2 3 1 |
| | brctl addif br-lan ra0 |
| | device ra0 is already a member of a bridge; can't enslave it to bridge br-lan. |
| | brctl setifvlan br-lan ra0 3 1 |
| | brctl addif br-lan ra1 |
| | can't add ra1 to bridge br-lan: Invalid argument |
| | brctl setifvlan br-lan ra1 4 1 |
| | can't set r[ 38.778589] br-lan: port 6(apclix0) entered blocking state |
| | a1 vlan to bridg[ 38.785441] br-lan: port 6(apclix0) entered disabled state |
| | e br-lan: Invali[ 38.792461] device apclix0 entered promiscuous mode |
| | d argument |
| | brctl addif br-lan apcli0 |
| | device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan. |
| | brctl setifvlan br-lan apcli0 3 1 |
| | brctl addif br-lan rax0 |
| | device rax0 is already a member of a bridge; can't enslave it to bridge br-lan. |
| | brctl setifvlan br-lan rax0 3 1 |
| | brctl addif br-lan rax1 |
| | can't add rax1 to bridge br-lan: Invalid argument |
| | brctl setifvlan br-lan rax1 8 1 |
| | can't set rax1 vlan to bridge br-lan: Invalid argument |
| | brctl addif br-lan apclix0 |
| | brctl setifvlan br-lan apclix0 3 1 |
| | nrd: stopping |
| | nrd: |
| | wifi_led_set 2g = ON, 5g = ON |
| | ========= don't cli WIFI-led when not cal |
| | /etc/rc.common 0 true |
| | [LAG] Disabling bonding-lag-lan |
| | [ 39.019175] br-lan: port 3(lan2) entered disabled state |
| | [ 39.030953] bond0: option slaves: invalid value (-lan2) |
| | [ 39.040265] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode |
| | [ 39.047625] 8021q: adding VLAN 0 to HW filter on device lan2 |
| | [ 39.055965] bond0: option slaves: invalid value (-lan3) |
| | [ 39.062635] br-lan: port 8(lan3) entered blocking state |
| | [ 39.067850] br-lan: port 8(lan3) entered disabled state |
| | [ 39.073772] device lan3 entered promiscuous mode |
| | [ 39.083726] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode |
| | [ 39.090876] 8021q: adding VLAN 0 to HW filter on device lan3 |
| | [ 39.101184] bond0 (unregistering): Released all slaves |
| | General shell run! |
| | saveconfig() begin |
| | The Hqos mode is not changed. |
| | start selfhealing |
| | saveconfig() end |
| | switch port [1] |
| | switch port [2] |
| | switch port [0] |
| | switch port [1] |
| | switch port [2] |
| | switch port [0] |
| | Don't need dual band temperature control!</nowiki> |
| </WRAP>\\ | </WRAP>\\ |
| |
| ==== OpenWrt bootlog ==== | ==== OpenWrt bootlog ==== |
| <WRAP bootlog> | <WRAP bootlog> |
| <nowiki>COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</nowiki> | <nowiki>[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] |
| | [ 0.000000] Linux version 5.15.118 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r23228-cd17d8df2a) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Mon Jun 26 11:20:39 2023 |
| | [ 0.000000] Machine model: Mercusys MR90X v1 |
| | [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000011002000 (options '') |
| | [ 0.000000] printk: bootconsole [uart8250] enabled |
| | [ 0.000000] Zone ranges: |
| | [ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff] |
| | [ 0.000000] DMA32 empty |
| | [ 0.000000] Normal empty |
| | [ 0.000000] Movable zone start for each node |
| | [ 0.000000] Early memory node ranges |
| | [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000042ffffff] |
| | [ 0.000000] node 0: [mem 0x0000000043000000-0x000000004302ffff] |
| | [ 0.000000] node 0: [mem 0x0000000043030000-0x000000004fbfffff] |
| | [ 0.000000] node 0: [mem 0x000000004fc00000-0x000000004ffbffff] |
| | [ 0.000000] node 0: [mem 0x000000004ffc0000-0x000000005fffffff] |
| | [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff] |
| | [ 0.000000] psci: probing for conduit method from DT. |
| | [ 0.000000] psci: PSCIv1.1 detected in firmware. |
| | [ 0.000000] psci: Using standard PSCI v0.2 function IDs |
| | [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. |
| | [ 0.000000] psci: SMC Calling Convention v1.2 |
| | [ 0.000000] percpu: Embedded 17 pages/cpu s30040 r8192 d31400 u69632 |
| | [ 0.000000] pcpu-alloc: s30040 r8192 d31400 u69632 alloc=17*4096 |
| | [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 |
| | [ 0.000000] Detected VIPT I-cache on CPU0 |
| | [ 0.000000] CPU features: detected: GIC system register CPU interface |
| | [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration |
| | [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024 |
| | [ 0.000000] Kernel command line: ubi.mtd=ubi0 console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 init=/etc/preinit |
| | [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) |
| | [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) |
| | [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off |
| | [ 0.000000] Memory: 498100K/524288K available (8384K kernel code, 910K rwdata, 1468K rodata, 448K init, 301K bss, 26188K reserved, 0K cma-reserved) |
| | [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| | [ 0.000000] rcu: Hierarchical RCU implementation. |
| | [ 0.000000] Tracing variant of Tasks RCU enabled. |
| | [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. |
| | [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 |
| | [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode |
| | [ 0.000000] GICv3: 640 SPIs implemented |
| | [ 0.000000] GICv3: 0 Extended SPIs implemented |
| | [ 0.000000] GICv3: Distributor has no Range Selector support |
| | [ 0.000000] Root IRQ handler: 0xffffffc008423104 |
| | [ 0.000000] GICv3: 16 PPIs implemented |
| | [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000 |
| | [ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys). |
| | [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns |
| | [ 0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns |
| | [ 0.008178] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000) |
| | [ 0.018587] pid_max: default: 32768 minimum: 301 |
| | [ 0.023461] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) |
| | [ 0.030813] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) |
| | [ 0.039707] rcu: Hierarchical SRCU implementation. |
| | [ 0.044840] smp: Bringing up secondary CPUs ... |
| | [ 0.049673] Detected VIPT I-cache on CPU1 |
| | [ 0.049694] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000 |
| | [ 0.049717] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] |
| | [ 0.049997] Detected VIPT I-cache on CPU2 |
| | [ 0.050010] GICv3: CPU2: found redistributor 2 region 0:0x000000000c0c0000 |
| | [ 0.050022] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] |
| | [ 0.050296] Detected VIPT I-cache on CPU3 |
| | [ 0.050307] GICv3: CPU3: found redistributor 3 region 0:0x000000000c0e0000 |
| | [ 0.050318] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] |
| | [ 0.050353] smp: Brought up 1 node, 4 CPUs |
| | [ 0.106920] SMP: Total of 4 processors activated. |
| | [ 0.111641] CPU features: detected: 32-bit EL0 Support |
| | [ 0.116799] CPU features: detected: CRC32 instructions |
| | [ 0.121985] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching |
| | [ 0.130426] CPU: All CPU(s) started at EL2 |
| | [ 0.134550] alternatives: patching kernel code |
| | [ 0.141512] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns |
| | [ 0.151419] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) |
| | [ 0.158473] pinctrl core: initialized pinctrl subsystem |
| | [ 0.164391] NET: Registered PF_NETLINK/PF_ROUTE protocol family |
| | [ 0.170614] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations |
| | [ 0.177721] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations |
| | [ 0.185517] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations |
| | [ 0.193741] thermal_sys: Registered thermal governor 'fair_share' |
| | [ 0.193745] thermal_sys: Registered thermal governor 'bang_bang' |
| | [ 0.199863] thermal_sys: Registered thermal governor 'step_wise' |
| | [ 0.205900] thermal_sys: Registered thermal governor 'user_space' |
| | [ 0.212108] ASID allocator initialised with 65536 entries |
| | [ 0.223996] pstore: Registered ramoops as persistent store backend |
| | [ 0.230208] ramoops: using 0x10000@0x42ff0000, ecc: 0 |
| | [ 0.243864] cryptd: max_cpu_qlen set to 1000 |
| | [ 0.249886] SCSI subsystem initialized |
| | [ 0.253740] libata version 3.00 loaded. |
| | [ 0.258471] clocksource: Switched to clocksource arch_sys_counter |
| | [ 0.265102] NET: Registered PF_INET protocol family |
| | [ 0.270082] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) |
| | [ 0.277735] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) |
| | [ 0.286139] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) |
| | [ 0.293927] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) |
| | [ 0.301735] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) |
| | [ 0.308947] TCP: Hash tables configured (established 4096 bind 4096) |
| | [ 0.315386] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) |
| | [ 0.321957] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) |
| | [ 0.329061] NET: Registered PF_UNIX/PF_LOCAL protocol family |
| | [ 0.334765] PCI: CLS 0 bytes, default 64 |
| | [ 0.340838] workingset: timestamp_bits=46 max_order=17 bucket_order=0 |
| | [ 0.350367] squashfs: version 4.0 (2009/01/31) Phillip Lougher |
| | [ 0.356233] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. |
| | [ 0.393945] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) |
| | [ 0.404874] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled |
| | [ 0.413166] printk: console [ttyS0] disabled |
| | [ 0.437604] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 121, base_baud = 2500000) is a ST16650V2 |
| | [ 0.446914] printk: console [ttyS0] enabled |
| | [ 0.455268] printk: bootconsole [uart8250] disabled |
| | [ 0.465578] mtk_rng 1020f000.rng: registered RNG driver |
| | [ 0.465636] hwrng: no data available |
| | [ 0.471034] cacheinfo: Unable to detect cache hierarchy for CPU 0 |
| | [ 0.482798] loop: module loaded |
| | [ 0.485943] Loading iSCSI transport class v2.0-870. |
| | [ 0.492453] spi-nand spi0.0: GigaDevice SPI NAND was found. |
| | [ 0.498019] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 128 |
| | [ 0.506381] 6 fixed-partitions partitions found on MTD device spi0.0 |
| | [ 0.512727] Creating 6 MTD partitions on "spi0.0": |
| | [ 0.517502] 0x000000000000-0x000000200000 : "boot" |
| | [ 0.524774] 0x000000200000-0x000000300000 : "u-boot-env" |
| | [ 0.531458] 0x000000300000-0x000003500000 : "ubi0" |
| | [ 0.591088] 0x000003500000-0x000006700000 : "ubi1" |
| | [ 0.647759] 0x000006700000-0x000006f00000 : "userconfig" |
| | [ 0.660828] 0x000006f00000-0x000007300000 : "tp_data" |
| | [ 3.409474] Maxlinear Ethernet GPY211C mdio-bus:06: Firmware Version: 0x886F (release) |
| | [ 3.418846] mtk_soc_eth 15100000.ethernet: generated random MAC address 4a:44:ca:70:ce:1b |
| | [ 3.427707] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc009580000, irq 128 |
| | [ 3.436874] mtk_soc_eth 15100000.ethernet: generated random MAC address 9e:fa:38:a7:c9:62 |
| | [ 3.445733] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc009580000, irq 128 |
| | [ 3.455231] i2c_dev: i2c /dev entries driver |
| | [ 3.460509] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0) |
| | [ 3.468988] NET: Registered PF_INET6 protocol family |
| | [ 3.474618] Segment Routing with IPv6 |
| | [ 3.478288] In-situ OAM (IOAM) with IPv6 |
| | [ 3.482252] NET: Registered PF_PACKET protocol family |
| | [ 3.487306] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| | [ 3.500362] 8021q: 802.1Q VLAN Support v1.8 |
| | [ 3.505483] pstore: Using crash dump compression: deflate |
| | [ 3.550064] mt7530-mdio mdio-bus:1f: no interrupt support |
| | [ 3.560329] mt7530-mdio mdio-bus:1f: configuring for fixed/2500base-x link mode |
| | [ 3.569366] mt7530-mdio mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/tx |
| | [ 3.578308] mt7530-mdio mdio-bus:1f lan0 (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7531 PHY] (irq=POLL) |
| | [ 3.598601] mt7530-mdio mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7531 PHY] (irq=POLL) |
| | [ 3.618618] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7531 PHY] (irq=POLL) |
| | [ 3.630411] DSA: tree 0 setup |
| | [ 3.633652] ubi0: default fastmap pool size: 20 |
| | [ 3.638171] ubi0: default fastmap WL pool size: 10 |
| | [ 3.642968] ubi0: attaching mtd2 |
| | [ 4.472546] ubi0: scanning is finished |
| | [ 4.499699] ubi0: attached mtd2 (name "ubi0", size 50 MiB) |
| | [ 4.505177] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes |
| | [ 4.512039] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 |
| | [ 4.518809] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 |
| | [ 4.525749] ubi0: good PEBs: 400, bad PEBs: 0, corrupted PEBs: 0 |
| | [ 4.531738] ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128 |
| | [ 4.538941] ubi0: max/mean erase counter: 21/15, WL threshold: 4096, image sequence number: 302291140 |
| | [ 4.548135] ubi0: available PEBs: 0, total reserved PEBs: 400, PEBs reserved for bad PEB handling: 20 |
| | [ 4.557336] ubi0: background thread "ubi_bgt0d" started, PID 472 |
| | [ 4.561063] block ubiblock0_2: created from ubi0:2(rootfs) |
| | [ 4.568801] ubiblock: device ubiblock0_2 (rootfs) set to be root filesystem |
| | [ 4.591116] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. |
| | [ 4.598418] Freeing unused kernel memory: 448K |
| | [ 4.648538] Run /etc/preinit as init process |
| | [ 4.652793] with arguments: |
| | [ 4.655745] /etc/preinit |
| | [ 4.658620] with environment: |
| | [ 4.661745] HOME=/ |
| | [ 4.664089] TERM=linux |
| | [ 5.281931] init: Console is alive |
| | [ 5.285434] init: - watchdog - |
| | [ 6.268381] kmodloader: loading kernel modules from /etc/modules-boot.d/* |
| | [ 6.390598] Key type encrypted registered |
| | [ 6.397026] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com |
| | [ 6.409252] kmodloader: done loading kernel modules from /etc/modules-boot.d/* |
| | [ 6.426071] init: - preinit - |
| | [ 6.725891] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode |
| | [ 6.734331] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx |
| | [ 6.757431] ubi1: default fastmap pool size: 8 |
| | [ 6.761905] ubi1: default fastmap WL pool size: 4 |
| | [ 6.766593] ubi1: attaching mtd5 |
| | [ 6.769831] ubi1: MTD device 5 is write-protected, attach in read-only mode |
| | [ 6.842735] ubi1: scanning is finished |
| | [ 6.869269] ubi1 warning: 0xffffffc00856b974: cannot reserve enough PEBs for bad PEB handling, reserved 8, need 20 |
| | [ 6.879906] ubi1: attached mtd5 (name "tp_data", size 4 MiB) |
| | [ 6.885554] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes |
| | [ 6.888486] random: procd: uninitialized urandom read (4 bytes read) |
| | [ 6.892414] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 |
| | [ 6.905507] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 |
| | [ 6.912452] ubi1: good PEBs: 32, bad PEBs: 0, corrupted PEBs: 0 |
| | [ 6.918351] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 |
| | [ 6.925555] ubi1: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 682472375 |
| | [ 6.934582] ubi1: available PEBs: 0, total reserved PEBs: 32, PEBs reserved for bad PEB handling: 8 |
| | [ 6.943613] ubi1: background thread "ubi_bgt1d" started, PID 558 |
| | [ 6.953467] UBIFS (ubi1:0): read-only UBI device |
| | [ 6.960180] UBIFS (ubi1:0): Mounting in unauthenticated mode |
| | [ 7.259856] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "tp_data", R/O mode |
| | [ 7.268192] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes |
| | [ 7.278088] UBIFS (ubi1:0): FS size: 1269760 bytes (1 MiB, 10 LEBs), max 18 LEBs, journal size 888833 bytes (0 MiB, 5 LEBs) |
| | [ 7.289196] UBIFS (ubi1:0): reserved for root: 59973 bytes (58 KiB) |
| | [ 7.295443] UBIFS (ubi1:0): media format: w5/r0 (latest is w5/r0), UUID BCFB1CE0-BA38-4F61-BFD5-EDD01DB8BDC2, small LPT model |
| | [ 7.391873] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode |
| | [ 9.483068] mount_root: loading kmods from internal overlay |
| | [ 9.493321] kmodloader: loading kernel modules from //etc/modules-boot.d/* |
| | [ 9.500647] kmodloader: done loading kernel modules from //etc/modules-boot.d/* |
| | [ 10.328483] random: crng init done |
| | [ 10.368872] UBIFS (ubi0:3): Mounting in unauthenticated mode |
| | [ 10.374594] UBIFS (ubi0:3): background thread "ubifs_bgt0_3" started, PID 609 |
| | [ 10.693055] UBIFS (ubi0:3): UBIFS: mounted UBI device 0, volume 3, name "rootfs_data" |
| | [ 10.700886] UBIFS (ubi0:3): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes |
| | [ 10.710780] UBIFS (ubi0:3): FS size: 31997952 bytes (30 MiB, 252 LEBs), max 262 LEBs, journal size 1650688 bytes (1 MiB, 13 LEBs) |
| | [ 10.722407] UBIFS (ubi0:3): reserved for root: 1511341 bytes (1475 KiB) |
| | [ 10.729005] UBIFS (ubi0:3): media format: w5/r0 (latest is w5/r0), UUID FD8379A5-4A22-43E5-B06D-0E28E2E800C3, small LPT model |
| | [ 10.742540] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab |
| | [ 10.749578] block: unable to load configuration (fstab: Entry not found) |
| | [ 10.756290] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab |
| | [ 10.762767] block: unable to load configuration (fstab: Entry not found) |
| | [ 10.769495] block: attempting to load /etc/config/fstab |
| | [ 10.774764] block: unable to load configuration (fstab: Entry not found) |
| | [ 10.781478] block: no usable configuration |
| | [ 10.793020] UBIFS (ubi0:3): un-mount UBI device 0 |
| | [ 10.797722] UBIFS (ubi0:3): background thread "ubifs_bgt0_3" stops |
| | [ 10.810031] UBIFS (ubi0:3): Mounting in unauthenticated mode |
| | [ 10.815753] UBIFS (ubi0:3): background thread "ubifs_bgt0_3" started, PID 612 |
| | [ 11.133830] UBIFS (ubi0:3): UBIFS: mounted UBI device 0, volume 3, name "rootfs_data" |
| | [ 11.141654] UBIFS (ubi0:3): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes |
| | [ 11.151549] UBIFS (ubi0:3): FS size: 31997952 bytes (30 MiB, 252 LEBs), max 262 LEBs, journal size 1650688 bytes (1 MiB, 13 LEBs) |
| | [ 11.163175] UBIFS (ubi0:3): reserved for root: 1511341 bytes (1475 KiB) |
| | [ 11.169772] UBIFS (ubi0:3): media format: w5/r0 (latest is w5/r0), UUID FD8379A5-4A22-43E5-B06D-0E28E2E800C3, small LPT model |
| | [ 11.472889] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab |
| | [ 11.479927] block: unable to load configuration (fstab: Entry not found) |
| | [ 11.486637] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab |
| | [ 11.493114] block: unable to load configuration (fstab: Entry not found) |
| | [ 11.499827] block: attempting to load /etc/config/fstab |
| | [ 11.505072] block: unable to load configuration (fstab: Entry not found) |
| | [ 11.511784] block: no usable configuration |
| | [ 11.516340] mount_root: overlay filesystem has not been fully initialized yet |
| | [ 11.525796] mount_root: switching to ubifs overlay |
| | [ 11.543641] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. |
| | [ 11.971999] urandom-seed: Seed file not found (/etc/urandom.seed) |
| | [ 12.006266] procd: - early - |
| | [ 12.009212] procd: - watchdog - |
| | [ 12.544155] procd: - watchdog - |
| | [ 12.547449] procd: - ubus - |
| | [ 12.644023] procd: - init - |
| | [ 13.139836] urngd: v1.0.2 started. |
| | [ 13.151303] kmodloader: loading kernel modules from /etc/modules.d/* |
| | [ 13.268402] Key type dns_resolver registered |
| | [ 13.276609] RPC: Registered named UNIX socket transport module. |
| | [ 13.282533] RPC: Registered udp transport module. |
| | [ 13.287219] RPC: Registered tcp transport module. |
| | [ 13.291912] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| | [ 13.306833] NFS: Registering the id_resolver key type |
| | [ 13.311914] Key type id_resolver registered |
| | [ 13.316080] Key type id_legacy registered |
| | [ 13.321767] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433(alg:7fcdfc00)/0/0/0 |
| | [ 13.336277] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b |
| | [ 13.343802] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36 |
| | [ 13.802254] mt7986-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Time: 20221012174743a |
| | [ 13.802254] |
| | [ 14.164469] mt7986-wmac 18000000.wifi: WM Firmware Version: ____000000, Build Time: 20221012174805 |
| | [ 14.331950] mt7986-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Build Time: 20221012174937 |
| | [ 14.476739] mt7986-wmac 18000000.wifi: eeprom load fail, use default bin |
| | [ 17.149334] PPP generic driver version 2.4.2 |
| | [ 17.154220] NET: Registered PF_PPPOX protocol family |
| | [ 17.161497] kmodloader: done loading kernel modules from /etc/modules.d/* |
| | [ 21.716286] mtk_soc_eth 15100000.ethernet eth0: Link is Down |
| | [ 21.729368] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode |
| | [ 21.737789] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx |
| | [ 21.738455] device eth0 entered promiscuous mode |
| | [ 21.751434] mt7530-mdio mdio-bus:1f lan0: configuring for phy/gmii link mode |
| | [ 21.761526] br-lan: port 1(lan0) entered blocking state |
| | [ 21.763229] mt7530-mdio mdio-bus:1f lan0: Link is Up - 1Gbps/Full - flow control rx/tx |
| | [ 21.766751] br-lan: port 1(lan0) entered disabled state |
| | [ 21.781566] device lan0 entered promiscuous mode |
| | [ 21.788125] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| | [ 21.797339] br-lan: port 1(lan0) entered blocking state |
| | [ 21.802591] br-lan: port 1(lan0) entered forwarding state |
| | [ 21.810716] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode |
| | [ 21.820748] br-lan: port 2(lan1) entered blocking state |
| | [ 21.825991] br-lan: port 2(lan1) entered disabled state |
| | [ 21.832997] device lan1 entered promiscuous mode |
| | [ 21.841147] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode |
| | [ 21.850972] br-lan: port 3(lan2) entered blocking state |
| | [ 21.856238] br-lan: port 3(lan2) entered disabled state |
| | [ 21.863525] device lan2 entered promiscuous mode |
| | [ 22.992687] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready |
| | [ 22.999606] br-lan: port 4(phy0-ap0) entered blocking state |
| | [ 23.005181] br-lan: port 4(phy0-ap0) entered disabled state |
| | [ 23.010971] device phy0-ap0 entered promiscuous mode |
| | [ 23.618892] IPv6: ADDRCONF(NETDEV_CHANGE): phy0-ap0: link becomes ready |
| | [ 23.625671] br-lan: port 4(phy0-ap0) entered blocking state |
| | [ 23.631305] br-lan: port 4(phy0-ap0) entered forwarding state |
| | [ 23.640375] br-lan: port 5(phy0-ap1) entered blocking state |
| | [ 23.645951] br-lan: port 5(phy0-ap1) entered disabled state |
| | [ 23.651739] device phy0-ap1 entered promiscuous mode |
| | [ 23.664907] br-lan: port 5(phy0-ap1) entered blocking state |
| | [ 23.670516] br-lan: port 5(phy0-ap1) entered forwarding state |
| | [ 23.920791] IPv6: ADDRCONF(NETDEV_CHANGE): phy0-ap1: link becomes ready |
| | [ 24.511539] br-lan: port 6(phy1-ap0) entered blocking state |
| | [ 24.517136] br-lan: port 6(phy1-ap0) entered disabled state |
| | [ 24.522892] device phy1-ap0 entered promiscuous mode |
| | [ 24.527938] br-lan: port 6(phy1-ap0) entered blocking state |
| | [ 24.533511] br-lan: port 6(phy1-ap0) entered forwarding state |
| | [ 24.539515] br-lan: port 6(phy1-ap0) entered disabled state |
| | [ 25.668560] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap0: link becomes ready |
| | [ 25.675280] br-lan: port 6(phy1-ap0) entered blocking state |
| | [ 25.680871] br-lan: port 6(phy1-ap0) entered forwarding state |
| | [ 25.687785] br-lan: port 7(phy1-ap1) entered blocking state |
| | [ 25.693419] br-lan: port 7(phy1-ap1) entered disabled state |
| | [ 25.699200] device phy1-ap1 entered promiscuous mode |
| | [ 25.706885] br-lan: port 7(phy1-ap1) entered blocking state |
| | [ 25.712475] br-lan: port 7(phy1-ap1) entered forwarding state |
| | [ 26.000345] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap1: link becomes ready</nowiki> |
| </WRAP>\\ | </WRAP>\\ |
| |
| ===== Notes ===== | ===== Notes ===== |
| | |
| | None so far. |
| | |
| | /* |
| //Space for additional notes, links to forum threads or other resources.// | //Space for additional notes, links to forum threads or other resources.// |
| |
| * ... | * ... |
| | */ |
| ===== Tags ===== | ===== Tags ===== |
| <WRAP BOX> | |
| FIXME //Add tags below, then remove this fixme.// | |
| </WRAP> | |
| |
| [[meta:tags|How to add tags]] | [[meta:tags|How to add tags]] |
| {{tag>EXAMPLETAG}} | {{tag>mediatek MT7986 armv8 128NAND SPI-NAND 512RAM 4Port 2.5GigabitEthernet GigabitEthernet 8Ant NonDetachableAntenna 0usb 4core 4thread 2wnic 4x4 802.11ax wifi6 u-boot ARMv8 cortexa53 Filogic Serial 12v_powered Dual_firmware serial 1button }} |