Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Next revisionBoth sides next revision
toh:meraki:mx65w [2024/10/29 05:48] – Created from the form at meta:create_new_device_page evstoh:meraki:mx65w [2024/10/29 10:16] – Add photos of front and back of board when opened. evs
Line 9: Line 9:
 //Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.// //Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.//
  
-<WRAP BOX> +The MX65W is an enterprise security appliance sharing similar hardware to MX64/MX64W/MX65. 
-FIXME Any text with a light background (like this one) provides instructions for creating the Details PageWhen you have filled in correct/useful information (instead of any template that's there) **remove the instructions, as well as the ''<nowiki><WRAP></nowiki>'' that encloses it.** + 
-</WRAP>+It features 12 switched ethernet ports. 
 +Of note is the switch port layout: 
 + 
 +<code> 
 +eth0-wan1 
 +    -> wan2 
 +    -> sw0 
 +          - lan3 
 +          - lan4 
 +          - lan5 
 +          - lan6 
 +          - lan7 
 +    -> sw1 
 +          - lan8 
 +          - lan9 
 +          - lan10 
 +          - lan11 
 +          - lan12 
 +</code> 
 + 
 +**Also of note is wireless is unsupported.**
  
 /*****/ /*****/
Line 17: Line 37:
 /*****/ /*****/
  
-{{media:example:genericrouter1.png?200|Generic Router}}+{{:media:meraki:mx65w_topside.jpg?400|}} 
 +{{:media:meraki:mx65w_backside.jpg?400|}} 
  
 <WRAP BOX> <WRAP BOX>
Line 50: Line 72:
   "paging": false,   "paging": false,
   "shownColumns": ["brand", "model", "version", "supportedcurrentrel", "oemdevicehomepageurl", "forumsearch", "deviceid"],   "shownColumns": ["brand", "model", "version", "supportedcurrentrel", "oemdevicehomepageurl", "forumsearch", "deviceid"],
-  "filterColumns": {"brand": "^Meraki$", "model": "^MX65W$", "version": "^@@Version\\|@@$"}+  "filterColumns": {"brand": "^Meraki$", "model": "^MX65W$"}
 } --> } -->
  
Line 59: Line 81:
   "paging": false,   "paging": false,
   "shownColumns": ["unsupported_functions"],   "shownColumns": ["unsupported_functions"],
-  "filterColumns": {"brand": "^Meraki$", "model": "^MX65W$", "version": "^@@Version\\|@@$"}+  "filterColumns": {"brand": "^Meraki$", "model": "^MX65W$"}
 } --> } -->
  
Line 79: Line 101:
   "paging": false,   "paging": false,
   "shownColumns": ["model", "version", "cpu", "cpumhz", "cpucores", "flashmb", "rammb", "wlanhardware", "wlan24ghz", "wlan50ghz", "ethernet100mports", "ethernet1gports", "modem", "usbports"],   "shownColumns": ["model", "version", "cpu", "cpumhz", "cpucores", "flashmb", "rammb", "wlanhardware", "wlan24ghz", "wlan50ghz", "ethernet100mports", "ethernet1gports", "modem", "usbports"],
-  "filterColumns": {"brand": "^Meraki$", "model": "^MX65W$", "version": "^@@Version\\|@@$"}+  "filterColumns": {"brand": "^Meraki$", "model": "^MX65W$"}
 } --> } -->
  
Line 91: Line 113:
   "paging": false,   "paging": false,
   "shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtinstallurl", "firmwareopenwrtupgradeurl", "firmwareoemstockurl"],   "shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtinstallurl", "firmwareopenwrtupgradeurl", "firmwareoemstockurl"],
-  "filterColumns": {"brand": "^Meraki$", "model": "^MX65W$", "version": "^@@Version\\|@@$"}+  "filterColumns": {"brand": "^Meraki$", "model": "^MX65W$"}
 } --> } -->
 */ */
Line 103: Line 125:
   "paging": false,   "paging": false,
   "shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtsnapshotinstallurl", "firmwareopenwrtsnapshotupgradeurl", "firmwareoemstockurl"],   "shownColumns": ["model", "version", "supportedcurrentrel", "firmwareopenwrtsnapshotinstallurl", "firmwareopenwrtsnapshotupgradeurl", "firmwareoemstockurl"],
-  "filterColumns": {"brand": "^Meraki$", "model": "^MX65W$", "version": "^@@Version\\|@@$"}+  "filterColumns": {"brand": "^Meraki$", "model": "^MX65W$"}
 } --> } -->
  
Line 117: Line 139:
 Please check out the article [[docs:techref:flash.layout|Flash layout]]. It contains examples and explanations that describe how to document the flash layout. Please check out the article [[docs:techref:flash.layout|Flash layout]]. It contains examples and explanations that describe how to document the flash layout.
 </WRAP> </WRAP>
 +
 +There are potentially two flash layouts.
 +If your bootloader partition is 512K you will need to do more steps in the flashing instructions. Make sure to flash the smaller bootloader.
  
 ==== OEM easy installation ==== ==== OEM easy installation ====
Line 135: Line 160:
 </WRAP> </WRAP>
  
-==== OEM installation using the TFTP method ====+You will need a root shell on the device. 
 +This is achieved by holding the reset button in when booting.
  
-->  [[docs:guide-user:installation:generic.flashing.tftp]]+You can either use the serial port internal to the device. 
 +Or telnet to the device. 
 +One should be able to telnet to 192.168.1.1 from 192.168.1.2. (Author hasn't tested, used serial port instead)
  
-=== Specific values needed for tftp ===+U boot: https://github.com/clayface/U-boot-MX64-20190430_MX65
  
-<WRAP BOX>+Instructions from github post pasted here: 
 +<code> 
 +Installation guide:
  
-FIXME Enter values for "FILL-IN" below+Initial installation steps: 
 +  1. Compile or obtain OpenWrt files for the MX65, including 
 +     u-boot, initramfs and sysupgrade images. 
 +  2. A USB disk with DOS partition scheme and primary FAT partition is 
 +     required. 
 + </code> 
 +Of note the author had success with a non partitioned fat32 device for use in the busybox shell on factory firmware. 
 +But the flashed bootloader only pulled the initramfs off of a fat16 formatted 128M flash drive that was partitioned. 
 +<code> 
 +  3.<n/a> for MX65 
 +  4. On the device, boot into diagnostic mode by holding reset when 
 +     powering on the device. Continue to hold reset until the orange LED 
 +     begins to flash white. On used units the white flash may be difficult 
 +     to see. 
 +  5. Plug an Ethernet cable into the first LAN port, set the host to 
 +     192.168.1.2 and confirm telnet connectivity to 192.168.1.1. 
 +</code>
  
-^ Bootloader tftp server IPv4 address  | FILL-IN   | +<code> 
-^ Bootloader MAC address (special)     | FILL-IN   | +U-boot installation - MX65 Only
-^ Firmware tftp image                  | [[:downloads|Latest OpenWrt release]] (**''NOTE:''** Name must contain //"tftp"//) | +  1. Obtain telnet access to the MX65.
-^ TFTP transfer window                 | FILL-IN seconds                                | +
-^ TFTP window start                    | approximately FILL-IN seconds after power on   | +
-^ TFTP client required IP address      | FILL-IN                                        |+
  
-</WRAP>+  2. Confirm the size of the device's boot(mtd0) partition. In most 
 +     cases it should be 0x100000 or larger. If this is the case, please 
 +     proceed to use the uboot_mx65 image. If the reported size is 
 +     0x80000, please use the uboot_mx65_small image, then follow the 
 +     later guide to change to the larger image. 
 +`cat /proc/mtd` 
 + 
 +  3. Prepare a USB drive formatted to FAT. Download the appropriate 
 +     uboot_mx65 to the USB drive from the following location and verify 
 +     the SHA512: 
 +        https://github.com/clayface/U-boot-MX64-20190430_MX65 
 + 
 +  3. Once you have telnet access to the MX65, plug in the USB disk and 
 +     run the following commands, with caution. The USB disk should 
 +     automount but if it does not, you will need to power off and on 
 +     again with reset held. Depending on step 2, use the uboot_mx65 or 
 +     uboot_mx65_small image accordingly: 
 +        `cd /tmp/media/sda1` 
 +        `dd if=uboot_mx65 of=/dev/mtdblock0` 
 + 
 +  4. Once this has successfully completed, power off the device. If you 
 +     did not need to install the small u-boot image, proceed to 
 +     "OpenWrt Installation". Otherwise proceed to "UBI supporting 
 +     bootloader installation"
 +</code> 
 + 
 +<code> 
 + 
 +UBI supporting bootloader installation: 
 +  These steps need to be followed if the older u-boot image was 
 +  installed, either because the Meraki diagnostic partition scheme used 
 +  0x80000 as the mtd0 size, or because you installed the u-boot provided 
 +  while OpenWrt support was still under development. If using OpenWrt, 
 +  please make a backup before proceeding. 
 + 
 +  1. Obtain the relevant image from the MX64(A0) or MX65 u-boot repo: 
 +        `openwrt-bcm5862x-generic-meraki_XXXX-initramfs-kernel.bin` 
 + 
 +  2. With the USB drive already inserted, power on the device while 
 +     holding the reset button. A white/orange flashing pattern will 
 +     occur shortly after power on. Let go of the reset button. The 
 +     device is now booting into OpenWrt initramfs stored on the USB 
 +     disk. 
 + 
 +  3. Connect by SSH to 192.168.1.1 and flash the embedded u-boot image, 
 +     changing X as appropriate: 
 +        `mtd write /root/uboot_mx6X /dev/mtd0` 
 +     You do not need to reboot as this image can handle "Kernel-in-UBI" 
 +     OpenWrt installation. 
 + 
 +  4. You can proceed to obtain and flash the appropriate OpenWrt image 
 +     at "OpenWrt Installation" Step 3. 
 + 
 +  5. Reboot will take significantly longer due to Shmoo calibration. In 
 +     case the device does not come online after several minute, power- 
 +     cycle the device and see if it boots. If you see an orange/white 
 +     flashing pattern, this indicates UBI booting was not successful and 
 +     you will need to copy a new bcm53xx image to a USB disk before 
 +     booting it and attempting to install OpenWrt again - refer to 
 +     "OpenWrt Installation" step 1. Do not attempt to reflash u-boot in 
 +     this scenario. 
 +      
 +</code> 
 + 
 +Note from wiki page author: 
 +The flashed bootloader only pulled the initramfs off of a fat16 formatted 128M flash drive that was partitioned for me. 
 +An unpartitioned fat32 4GB flash drive did not work. 
 +<code> 
 +OpenWrt Installation: 
 +  1. Having obtained an OpenWrt image, please copy the file 
 +        `openwrt-bcm53xx-generic-meraki_XXXX-initramfs.bin` 
 +     to the base directory of a FAT formatted USB drive using DOS 
 +     partition scheme ,where XXXX is mx65 depending on 
 +     which device you have. 
 + 
 +  2. With the USB drive already inserted, power on the device. Boot time 
 +     will be longer than usual while Shmoo calibration takes place. A 
 +     different white/orange flashing pattern will eventually occur to 
 +     indicate device is now booting into OpenWrt initramfs stored on the 
 +     USB disk. 
 + 
 +  3. Ensuring Ethernet is plugged into a LAN port with IP set in the 
 +     192.168.1.0/24 subnet excluding 192.168.1.1, use SCP to copy the 
 +     sysupgrade file to 192.168.1.1:/tmp, eg: 
 +        `scp openwrt-bcm53xx-generic-meraki_XXXX-squashfs.sysupgrade.bin\ 
 +        192.168.1.1:/tmp` 
 + 
 +  4. Connect by SSH to 192.168.1.1 and run sysupgrade: 
 +        `sysupgrade \ 
 +        /tmp/openwrt-bcm53xx-generic-meraki_XXXX-squashfs.sysupgrade.bin` 
 + 
 +  5. OpenWrt should now be installed on the device. 
 +</code>
  
 ===== Upgrading OpenWrt ===== ===== Upgrading OpenWrt =====
Line 173: Line 308:
  
   * ''sysupgrade''   * ''sysupgrade''
-  * ''mtd'' 
  
 Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing. Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.
Line 185: Line 319:
 wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
 sysupgrade /tmp/xxx.abc sysupgrade /tmp/xxx.abc
-</code> 
- 
-=== mtd === 
- 
-If ''sysupgrade'' does not support this router, use ''mtd''. 
- 
-  * Login as root via SSH on 192.168.1.1, then enter the following commands: 
- 
-<code> 
-cd /tmp 
-wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc 
-mtd write /tmp/xxx.abc linux && reboot 
 </code> </code>
  
Line 219: Line 341:
 The default network configuration is: The default network configuration is:
 ^ Interface Name   ^ Description                  ^ Default configuration    ^ ^ Interface Name   ^ Description                  ^ Default configuration    ^
-| br-lan           EXAMPLE LAN & WiFi           EXAMPLE 192.168.1.1/24   | +| br-lan           lan3-lan12           192.168.1.1/24   | 
-vlan0 (eth0.0)   | EXAMPLE LAN ports (1 to 4)   | EXAMPLE None             | +br-wan             | wan1-wan2               | DHCP/DHCP6         |
-vlan1 (eth0.1)   | EXAMPLE WAN port             | EXAMPLE DHCP             | +
-| wl0              | EXAMPLE WiFi                 | EXAMPLE Disabled         |+
  
 </WRAP> </WRAP>
  
 ==== Switch Ports (for VLANs) ==== ==== Switch Ports (for VLANs) ====
-<WRAP BOX+<code
-FIXME Please fill in real values for this device, then remove the EXAMPLEs+eth0-> wan1 
 +    -> wan2 
 +    -> sw0 
 +          - lan3 
 +          - lan4 
 +          - lan5 
 +          - lan6 
 +          - lan7 
 +    -> sw1 
 +          - lan8 
 +          - lan9 
 +          - lan10 
 +          - lan11 
 +          - lan12 
 +</code>
  
-Numbers 0-3 are Ports 1-4 as labeled on the unitnumber is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooledPort 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0vlan1 = eth0.1 and so on. +<code> 
-^ Port             ^ Switch port   ^ +1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1000 
-| Internet (WAN)   | EXAMPLE 4     | +    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 
-| LAN 1            | EXAMPLE 3     | +2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP qlen 1000 
-| LAN 2            | EXAMPLE 2     | +    link/ether  brd ff:ff:ff:ff:ff:ff 
-| LAN 3            | EXAMPLE 1     | +3: wan1@eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue master br-wan state LOWERLAYERDOWN qlen 1000 
-| LAN 4            | EXAMPLE 0     | +    link/ether brd ff:ff:ff:ff:ff:ff 
- +4: wan2@eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue master br-wan state LOWERLAYERDOWN qlen 1000 
-</WRAP>+    link/ether  brd ff:ff:ff:ff:ff:ff 
 +5: sw0@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1502 qdisc noqueue state UP qlen 1000 
 +    link/ether brd ff:ff:ff:ff:ff:ff 
 +6: sw1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1502 qdisc noqueue state UP qlen 1000 
 +    link/ether brd ff:ff:ff:ff:ff:ff 
 +7: lan8@sw1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue master br-lan state LOWERLAYERDOWN qlen 1000 
 +    link/ether  brd ff:ff:ff:ff:ff:ff 
 +8: lan9@sw1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue master br-lan state LOWERLAYERDOWN qlen 1000 
 +    link/ether brd ff:ff:ff:ff:ff:ff 
 +9: lan10@sw1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue master br-lan state LOWERLAYERDOWN qlen 1000 
 +    link/ether  brd ff:ff:ff:ff:ff:ff 
 +10: lan11@sw1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue master br-lan state LOWERLAYERDOWN qlen 1000 
 +    link/ether  brd ff:ff:ff:ff:ff:ff 
 +11: lan12@sw1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue master br-lan state LOWERLAYERDOWN qlen 1000 
 +    link/ether  brd ff:ff:ff:ff:ff:ff 
 +12: lan3@sw0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue master br-lan state LOWERLAYERDOWN qlen 1000 
 +    link/ether  brd ff:ff:ff:ff:ff:ff 
 +13: lan4@sw0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue master br-lan state LOWERLAYERDOWN qlen 1000 
 +    link/ether  brd ff:ff:ff:ff:ff:ff 
 +14: lan5@sw0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue master br-lan state LOWERLAYERDOWN qlen 1000 
 +    link/ether brd ff:ff:ff:ff:ff:ff 
 +15: lan6@sw0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue master br-lan state LOWERLAYERDOWN qlen 1000 
 +    link/ether  brd ff:ff:ff:ff:ff:ff 
 +16: lan7@sw0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue master br-lan state LOWERLAYERDOWN qlen 1000 
 +    link/ether  brd ff:ff:ff:ff:ff:ff 
 +17: br-lan: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000 
 +    link/ether  brd ff:ff:ff:ff:ff:ff 
 +18: br-wan: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000 
 +    link/ether brd ff:ff:ff:ff:ff:ff 
 +</code>
  
 ==== Buttons ==== ==== Buttons ====
Line 272: Line 435:
 filter  : Brand=Meraki filter  : Brand=Meraki
 filter  : Model=MX65W filter  : Model=MX65W
-filter  : Versions= 
 ---- ----
  
Line 331: Line 493:
 ==== OEM bootlog ==== ==== OEM bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE</nowiki>+<nowiki> 
 +U-Boot 2012.10-00101-g93bc206 (Jun 19 2015 - 12:33:28)Meraki MX64 Boot Kernel Loader                                             
 +                                                                                                                                 
 +DEV ID = 0xcf1e                                                                                                                  
 +PCIE CFG DEV ID = 0x8025                                                                                                         
 +OTP offset(0x8): 0x78f01c01                                                                                                      
 +OTP offset(0x9): 0xfe400818                                                                                                      
 +OTP offset(0xa): 0xc01b0                                                                                                         
 +OTP offset(0xb): 0x0                                                                                                             
 +OTP offset(0xc): 0x4a00000                                                                                                       
 +OTP offset(0xd): 0xffede250                                                                                                      
 +OTP offset(0xe): 0x1135d17f                                                   
 +OTP offset(0xf): 0x4000 
 +NSP25 32bit DDR 
 +SKU ID = 0x0 
 +DDR type: DDR3 
 +MEMC 0 DDR speed = 800MHz 
 +ddr_init2: Calling soc_ddr40_set_shmoo_dram_config 
 +ddr_init2: Calling soc_ddr40_phy_calibrate 
 +C01. Check Power Up Reset_Bar 
 +C02. Config and Release PLL from reset 
 +C03. Poll PLL Lock 
 +C04. Calibrate ZQ (ddr40_phy_calib_zq) 
 +C05. DDR PHY VTT On (Virtual VTT setup) DISABLE all Virtual VTT 
 +C06. DDR40_PHY_DDR3_MISC 
 +C07. VDL Calibration 
 +C07.1 
 +C07.2 
 +C07.4 
 +C07.4.1 
 +C07.4.4 
 +VDL calibration result: 0x30000003 (cal_steps = 0) 
 +C07.4.5 
 +C07.4.6 
 +C07.5 
 +C08. DDR40_PHY_DDR3_MISC : Start DDR40_PHY_RDLY_ODT.... 
 +C09. Start ddr40_phy_autoidle_on (MEM_SYS_PARAM_PHY_AUTO_IDLE) .... 
 +C10. Wait for Phy Ready 
 +Programming controller register 
 +ddr_init2: Calling soc_ddr40_shmoo_ctl 
 +Validate Shmoo parameters stored in flash ..... OK 
 +Press Ctrl-C to run Shmoo ..... skipped 
 +Restoring Shmoo parameters from flash ..... done 
 +Running simple memory test ..... OK 
 +DDR Tune Completed 
 +DRAM:  31.9 MiB 
 +WARNING: Caches not enabled 
 +NAND:   Micron MT29F8G08ABACA, Found strap type 0x6 strap page 0x2 
 +256 KiB blocks, 4 KiB pages, 27B OOB, 8-bit 
 +NAND:   chipsize 1024 MiB 
 +*** Warning - bad CRC, using default environment 
 + 
 +In:    serial 
 +Out:   serial 
 +Err:   serial 
 +arm_clk=1200MHz, axi_clk=600MHz, apb_clk=300MHz, arm_periph_clk=600MHz 
 +Enabling icache and dcache 
 +Enabling l2cache 
 +JDIZ 
 +Registering eth 
 +Broadcom BCM IPROC Ethernet driver 0.1 
 +Using GMAC1 (0x18023000) 
 +ERROR: could not get env ethaddr 
 +et0: ethHw_chipAttach: Chip ID: 0xcf1e; phyaddr: 0x1e 
 +bcm_robo_attach: devid: 0x10 
 +robo_serdes_reset_core page(0x16) id2(0x3ff) 
 +robo_serdes_init page(0x16) id0(0x4281) id1(0x4fc0) id2(0x3ff) 
 +robo_serdes_init access page4 via page5 lane1 
 +robo_serdes_init page(0x16) id0(0x4281) id1(0x4fc0) id2(0x3ff) 
 +robo_serdes_init set back to lane0 
 + 
 +NAND read: device 0 offset 0x500000, size 0x200000 
 + 2097152 bytes read: OK 
 +Uncompressing Linux... done, booting the kernel. 
 +[    0.000000] Booting Linux on physical CPU 0 
 +[    0.000000] Linux version 3.4.113 (den@sf202.meraki.com) (gcc version 4.8.3 (GCC) ) #2 Fri Feb 4 17:49:15 PST 2022 
 +[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d 
 +[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache 
 +[    0.000000] Machine: Meraki Wired-Arm-Nsp, model: Meraki wired-arm-nsp 
 +[    0.000000] bootconsole [earlycon0] enabled 
 +[    0.000000] Memory policy: ECC disabled, Data cache writeback 
 +[    0.000000] BUG: mapping for 0x18000000 at 0xff000000 out of vmalloc space 
 +[    0.000000] BUG: mapping for 0x19000000 at 0xff200000 out of vmalloc space 
 +[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260080 
 +[    0.000000] Kernel command line: console=ttyS0,115200n8 ubi.mtd=ubi mem=0x3fff0000 earlyprintk loader=u-boot part=bootkernel2 
 +[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) 
 +[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) 
 +[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) 
 +[    0.000000] Memory: 1023MB = 1023MB total 
 +[    0.000000] Memory: 1033124k/1033124k available, 15388k reserved, 0K highmem 
 +[    0.000000] Virtual kernel memory layout: 
 +[    0.000000]     vector  : 0xffff0000 - 0xffff1000     4 kB) 
 +[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB) 
 +[    0.000000]     vmalloc : 0x80000000 - 0xff000000   (2032 MB) 
 +[    0.000000]     lowmem  : 0x40000000 - 0x7fff0000   (1023 MB) 
 +[    0.000000]     modules : 0x3f000000 - 0x40000000    16 MB) 
 +[    0.000000]       .text : 0x40008000 - 0x403139e4   (3119 kB) 
 +[    0.000000]       .init : 0x40314000 - 0x405e75f4   (2894 kB) 
 +[    0.000000]       .data : 0x405e8000 - 0x4060e5c8   ( 154 kB) 
 +[    0.000000]        .bss : 0x4060e5ec - 0x40631e78   ( 143 kB) 
 +[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 
 +[    0.000000] NR_IRQS:292 
 +[    0.000000] Data abort at addr=0x0, fsr=0x1c06 ignored. 
 +[    0.000000] sched_clock: 32 bits at 250 Hz, resolution 4000000ns, wraps every 4294967292ms 
 +[    0.004000] Calibrating delay loop... 2390.01 BogoMIPS (lpj=4780032) 
 +[    0.024000] pid_max: default: 32768 minimum: 301 
 +[    0.028000] Mount-cache hash table entries: 512 
 +[    0.032000] CPU: Testing write buffer coherency: ok 
 +[    0.036000] Setting up static identity map for 0x6023c5b0 - 0x6023c608 
 +[    0.040000] L310 cache controller enabled 
 +[    0.044000] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x0a150000, Cache size: 524288 B 
 +[    0.048000] devtmpfs: initialized 
 +[    0.052000] NET: Registered protocol family 16 
 +[    0.056000] gpiochip_add: registered GPIOs 0 to 31 on device: GPIOA 
 +[    0.060000] iproc gpiochip add GPIOA 
 +[    0.064000] GPIOA:ioaddr ff000060  
 +[    0.068000] GPIOA:intr_ioaddr ff000000 dmu_ioaddr ff020000 
 +[    0.072000] gpiochip_add: registered GPIOs 32 to 35 on device: GPIOB 
 +[    0.076000] iproc gpiochip add GPIOB 
 +[    0.080000] GPIOB:ioaddr ff030000  
 +[    0.084000] Warning: No reset pin specified in config 
 +[    0.088000] request_idm_timeout_interrupts: 600 entry 
 +[    0.092000] idm_timeout_handler: 340, 0 entry 
 +[    0.096000] idm_timeout_handler: 585 exit 
 +[    0.100000] request_idm_timeout_interrupts: 696 exit 
 +[    0.104000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. 
 +[    0.108000] hw-breakpoint: maximum watchpoint size is 4 bytes. 
 +[    0.116000] bio: create slab <bio-0> at 0 
 +[    0.120000] usbcore: registered new interface driver usbfs 
 +[    0.124000] usbcore: registered new interface driver hub 
 +[    0.128000] usbcore: registered new device driver usb 
 +[    0.132000] i2c-gpio i2c-gpio.6: using pins 5 (SDA) and 4 (SCL) 
 +[    0.136000] Switching to clocksource iproc_gtimer 
 +[    0.140000] NET: Registered protocol family 2 
 +[    0.152000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) 
 +[    0.156000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) 
 +[    0.160000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) 
 +[    0.164000] TCP: Hash tables configured (established 131072 bind 65536) 
 +[    0.168000] TCP: reno registered 
 +[    0.168000] UDP hash table entries: 512 (order: 1, 8192 bytes) 
 +[    0.172000] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) 
 +[    0.176000] NET: Registered protocol family 1 
 +[    0.436000] PCIE0: LINKSTA reg 0xbe val 0x9012 
 +[    0.440000] reg[0xac]=0x10, reg[0xae]=0x42, reg[0xb0]=0x8000, reg[0xb4]=0x2c10, reg[0xb6]=0x10, reg[0xb8]=0x5c12, reg[0xba]=0x65, reg[0xbe]=0x9012, reg[0xc6]=0x40, reg[0xca]=0x1, reg[0x1 
 +[    0.460000] PCI host bridge to bus 0000:00 
 +[    0.464000] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff] 
 +[    0.468000] PCI: bus0: Fast back to back transfers disabled 
 +[    0.472000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring 
 +[    0.476000] PCI: bus1: Fast back to back transfers disabled 
 +[    0.480000] PCIe map irq: 0000:00:00.00 slot 0, pin 1, irq: 163 
 +[    0.484000] PCIe map irq: 0000:01:00.00 slot 0, pin 1, irq: 163 
 +[    0.488000] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff] 
 +[    0.492000] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit] 
 +[    0.496000] pci 0000:00:00.0: PCI bridge to [bus 01-01] 
 +[    0.500000] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x080fffff] 
 +[    0.504000] PCI: enabling device 0000:00:00.0 (0140 -> 0143) 
 +[    0.760000] PCIE1: LINKSTA reg 0xbe val 0x9012 
 +[    0.764000] reg[0xac]=0x10, reg[0xae]=0x42, reg[0xb0]=0x8000, reg[0xb4]=0x2c10, reg[0xb6]=0x10, reg[0xb8]=0x5c12, reg[0xba]=0x65, reg[0xbe]=0x9012, reg[0xc6]=0x40, reg[0xca]=0x1, reg[0x1 
 +[    0.784000] PCI host bridge to bus 0001:00 
 +[    0.788000] pci_bus 0001:00: root bus resource [mem 0x40000000-0x47ffffff] 
 +[    0.792000] PCI: bus0: Fast back to back transfers disabled 
 +[    0.796000] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring 
 +[    0.800000] PCI: bus1: Fast back to back transfers disabled 
 +[    0.804000] PCIe map irq: 0000:00:00.00 slot 0, pin 1, irq: 163 
 +[    0.808000] PCIe map irq: 0000:01:00.00 slot 0, pin 1, irq: 163 
 +[    0.812000] PCIe map irq: 0001:00:00.00 slot 0, pin 1, irq: 169 
 +[    0.816000] PCIe map irq: 0001:01:00.00 slot 0, pin 1, irq: 169 
 +[    0.820000] pci 0001:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff] 
 +[    0.824000] pci 0001:01:00.0: BAR 0: assigned [mem 0x40000000-0x40007fff 64bit] 
 +[    0.828000] pci 0001:00:00.0: PCI bridge to [bus 01-01] 
 +[    0.832000] pci 0001:00:00.0:   bridge window [mem 0x40000000-0x400fffff] 
 +[    0.836000] PCI: enabling device 0001:00:00.0 (0140 -> 0143) 
 +[    1.088000] PCIE2: LINKSTA reg 0xbe val 0x1001 
 +[    1.092000] reg[0xac]=0x10, reg[0xae]=0x42, reg[0xb0]=0x8000, reg[0xb4]=0x2c10, reg[0xb6]=0x10, reg[0xb8]=0x5c12, reg[0xba]=0x65, reg[0xbe]=0x1001, reg[0xc6]=0x40, reg[0xca]=0x1, reg[0x0 
 +[    1.216000] pm_init: Initializing Power Management .... 
 +[    1.228000] msgmni has been set to 2017 
 +[    1.232000] io scheduler noop registered 
 +[    1.236000] io scheduler deadline registered 
 +[    1.240000] io scheduler cfq registered (default) 
 +[    1.244000] iproc_pwmc_probe iobase ff031000 phys:18031000 
 +[    1.248000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled 
 +[    1.252000] 18000300.uart: ttyS0 at MMIO 0x18000300 (irq = 117) is a 16550A 
 +[    1.256000] console [ttyS0] enabled, bootconsole disabled 
 +[    1.256000] console [ttyS0] enabled, bootconsole disabled 
 +[    1.260000] at24 0-0050: 8192 byte 24c64 EEPROM, writable, 32 bytes/write 
 +[    1.264000] ONFI param page 0 valid 
 +[    1.268000] ONFI flash detected 
 +[    1.268000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xd3 (Micron MT29F8G08ABACAWP) 
 +[    1.272000] iproc_nand: heuristics exception detected, Micron MT29F8G08ABACA 
 +[    1.276000] iproc_nand: following bootloader settings 
 +[    1.280000] iproc_nand: 1024MiB total, 256KiB blocks, 4KiB pages, 27B OOB, 8-bit 
 +[    1.284000] iproc_nand: user oob per page: 46 bytes (4 steps) 
 +[    1.288000] Bad block table found at page 262080, version 0x01 
 +[    1.292000] Bad block table found at page 262016, version 0x01 
 +[    1.296000] Bad block table found at page 262080, version 0x01 
 +[    1.300000] Bad block table found at page 262016, version 0x01 
 +[    1.304000] Creating 6 MTD partitions on "nand_iproc.0": 
 +[    1.308000] 0x000000000000-0x000000200000 : "U-boot" 
 +[    1.312000] 0x000000100000-0x000000400000 : "bootkernel1" 
 +[    1.320000] 0x000000400000-0x000000500000 : "senao_nvram" 
 +[    1.324000] 0x000000500000-0x000000800000 : "bootkernel2" 
 +[    1.328000] 0x000000800000-0x00003ff00000 : "ubi" 
 +[    1.332000] 0x000000000000-0x00003ff00000 : "all" 
 +[    1.336000] iproc_nand: NAND controller driver is loaded 
 +[    1.340000] UBI: attaching mtd4 to ubi0 
 +[    1.344000] UBI: physical eraseblock size:   262144 bytes (256 KiB) 
 +[    1.348000] UBI: logical eraseblock size:    253952 bytes 
 +[    1.352000] UBI: smallest flash I/O unit:    4096 
 +[    1.356000] UBI: VID header offset:          4096 (aligned 4096) 
 +[    1.360000] UBI: data offset:                8192 
 +[    6.404000] UBI: max. sequence number:       1678905 
 +[    6.420000] UBI: attached mtd4 to ubi0 
 +[    6.424000] UBI: MTD device name:            "ubi" 
 +[    6.428000] UBI: MTD device size:            1015 MiB 
 +[    6.432000] UBI: number of good PEBs:        4060 
 +[    6.436000] UBI: number of bad PEBs:         0 
 +[    6.440000] UBI: number of corrupted PEBs:   0 
 +[    6.444000] UBI: max. allowed volumes:       128 
 +[    6.448000] UBI: wear-leveling threshold:    4096 
 +[    6.452000] UBI: number of internal volumes: 1 
 +[    6.456000] UBI: number of user volumes:     5 
 +[    6.460000] UBI: available PEBs:             1548 
 +[    6.464000] UBI: total number of reserved PEBs: 2512 
 +[    6.468000] UBI: number of PEBs reserved for bad PEB handling: 40 
 +[    6.472000] UBI: max/mean erase counter: 434/414 
 +[    6.476000] UBI: image sequence number:  887924684 
 +[    6.480000] UBI: background thread "ubi_bgt0d" started, PID 251 
 +[    6.488000] tun: Universal TUN/TAP device driver, 1.6 
 +[    6.492000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 
 +[    6.496000] bcm5301x_gmac_init_module: NAPI2_POLL mode 
 +[    6.500000] bcm5301x_gmac_probe enter name:bcmiproc-gmac0; id:0x0; unit:0 
 +[    6.504000] NVRAM: map 0x1e0a0000 
 +[    6.532000] et0: eth1addr not found, ignore it 
 +[    6.536000] bcm5301x_gmac_probe enter name:bcmiproc-gmac1; id:0x0; unit:1 
 +[    6.540000] et1: eth2addr not found, ignore it 
 +[    6.544000] bcm5301x_gmac_probe enter name:bcmiproc-gmac2; id:0x0; unit:2 
 +[    6.548000] si_doattach chipid: 0x3f05cf1e 
 +[    6.552000] et2: base_addr (0x18024000) irq (181) 
 +[    6.556000] etc_gmac_speed default GMAC2 speed: auto 
 +[    6.560000] etc_attach() mdio_init_time = 5 
 +[    6.564000] si_doattach: incoming bus is PCI but it's a lie, switching to SI devid:0xcf1c 
 +[    6.568000] si_doattach chipid: 0x3f05cf1e 
 +[    6.572000] si_attach socitype(0x3) chip(0xcf1e) chiprev(0x5) chippkg(0x0) 
 +[    6.576000] et2: chipattach: phyaddr(0x1e) 
 +[    6.580000] et2: chipattach: Calling robo attach 
 +[    6.584000] bcm_robo_attach: devid32: 0x10 
 +[    6.652000] bcm_robo_enable_switch IPROC OTP is not configured, can not determine skuid 
 +[    6.656000] bcm_robo_enable_switch Northstar Family chip 
 +[    6.660000] eth0: Broadcom BCM5302x 10/100/1000 Mbps Ethernet Controller 6.30.40 (TOB) (r) 
 +[    6.664000] eth_mac_proc_create: enter 
 +[    6.668000]  
 +[    6.668000] Creating fa bypass proc entry 
 +[    6.672000] et_ctf_active enabled 
 +[    6.676000] bcm5301x_gmac_probe enter name:bcmiproc-gmac3; id:0x0; unit:3 
 +[    6.680000] et3: eth3addr not found, ignore it 
 +[    6.684000] usbcore: registered new interface driver cdc_eem 
 +[    6.688000] usbcore: registered new interface driver cdc_subset 
 +[    6.692000] usbcore: registered new interface driver cdc_ncm 
 +[    6.696000] usbcore: registered new interface driver cdc_acm 
 +[    6.700000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters 
 +[    6.704000] usbcore: registered new interface driver usbserial 
 +[    6.708000] usbcore: registered new interface driver usbserial_generic 
 +[    6.712000] USB Serial support registered for generic 
 +[    6.716000] usbserial: USB Serial Driver core 
 +[    6.720000] usbcore: registered new interface driver option 
 +[    6.724000] USB Serial support registered for GSM modem (1-port) 
 +[    6.728000] usbcore: registered new interface driver qcserial 
 +[    6.732000] USB Serial support registered for Qualcomm USB modem 
 +[    6.736000] usbcore: registered new interface driver sierra 
 +[    6.740000] USB Serial support registered for Sierra USB modem 
 +[    6.744000] input: gpio-buttons.5 as /devices/gpio-buttons.5/input/input0 
 +[    6.748000] i2c /dev entries driver 
 +[    6.756000] GENPLL[5] mdiv=12 rate=1500000000 
 +[    6.760000] GENPLL[5] mdiv=12 rate=1500000000 
 +[    6.764000] sp805-wdt sp805-wdt: registration successful 
 +[    6.772000] usbcore: registered new interface driver usbhid 
 +[    6.776000] usbhid: USB HID core driver 
 +[    6.780000] meraki-config board-data.2: Meraki config device loaded 
 +[    6.784000] TCP: cubic registered 
 +[    6.784000] NET: Registered protocol family 17 
 +[    6.788000] NET: Registered protocol family 15 
 +[    6.792000] 8021q: 802.1Q VLAN Support v1.8 
 +[    6.796000] Registering SWP/SWPB emulation handler 
 +[    6.800000] devtmpfs: mounted 
 +[    6.804000] Freeing init memory: 2892K 
 +[    6.812000] Made it into bootsh: Feb  4 2022 17:48:18 
 +[    6.816000] bootsh build wired-14-202202031626-Gf4feb28b-den-detail 
 +[    6.956000] UBIFS: recovery needed 
 +[    7.168000] UBIFS: recovery completed 
 +[    7.172000] UBIFS: mounted UBI device 0, volume 3, name "storage" 
 +[    7.176000] UBIFS: file system size:   534061056 bytes (521544 KiB, 509 MiB, 2103 LEBs) 
 +[    7.180000] UBIFS: journal size:       26664960 bytes (26040 KiB, 25 MiB, 105 LEBs) 
 +[    7.184000] UBIFS: media format:       w4/r0 (latest is w4/r0) 
 +[    7.188000] UBIFS: default compressor: lzo 
 +[    7.192000] UBIFS: reserved for root:  4952683 bytes (4836 KiB) 
 +In manufacturing: FALSE 
 +In rma mode: FALSE 
 +[   13.632000] Mapping 39739392 bytes for /dev/mtdblock/part.safe 
 +Using itb config alamo (wired-arm-nsp alamo configuration) 
 +Description: wired-arm-nsp Kernel 
 +Description: wired-arm-nsp Ramdisk 
 +Description: wired-arm-nsp Device Tree 2GB Alamo 
 +[   19.372000] UBIFS: un-mount UBI device 0, volume 3 
 +[   19.380000] Starting new kernel 
 +[   19.384000] Bye! 
 +[    0.000000] Booting Linux on physical CPU 0x0 
 +[    0.000000] Linux version 4.4.177-meraki (oe-user@oe-host) (gcc version 6.4.0 (GCC) ) #1 SMP Thu May 18 02:50:12 UTC 2023 
 +[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d 
 +[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache 
 +[    0.000000] Machine model: Meraki MX65 
 +[    0.000000] bootconsole [earlycon0] enabled 
 +[    0.000000] Memory policy: Data cache writealloc 
 +[    0.000000] PERCPU: Embedded 12 pages/cpu @eefcd000 s17612 r8192 d23348 u49152 
 +[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522736 
 +[    0.000000] Kernel command line: console=ttyS0,115200n8 ubi.mtd=ubi earlyprintk 
 +[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) 
 +[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) 
 +[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) 
 +[    0.000000] Memory: 2045868K/2097088K available (3850K kernel code, 157K rwdata, 1180K rodata, 232K init, 479K bss, 51220K reserved, 0K cma-reserved, 1310656K highmem) 
 +[    0.000000] Virtual kernel memory layout: 
 +[    0.000000]     vector  : 0xffff0000 - 0xffff1000     4 kB) 
 +[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB) 
 +[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB) 
 +[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB) 
 +[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000     2 MB) 
 +[    0.000000]     modules : 0xbf000000 - 0xbfe00000    14 MB) 
 +[    0.000000]       .text : 0xc0008000 - 0xc04f1e38   (5032 kB) 
 +[    0.000000]       .init : 0xc04f2000 - 0xc052c000   ( 232 kB) 
 +[    0.000000]       .data : 0xc052c000 - 0xc0553400   ( 157 kB) 
 +[    0.000000]        .bss : 0xc0553400 - 0xc05cb194   ( 480 kB) 
 +[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 
 +[    0.000000] Hierarchical RCU implementation. 
 +[    0.000000]  Build-time adjustment of leaf fanout to 32. 
 +[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. 
 +[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 
 +[    0.000000] NR_IRQS:16 nr_irqs:16 16 
 +[    0.000000] L2C-310 erratum 769419 enabled 
 +[    0.000000] L2C-310 enabling early BRESP for Cortex-A9 
 +[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9 
 +[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled 
 +[    0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB 
 +[    0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x4e150001 
 +[    0.000010] sched_clock: 64 bits at 600MHz, resolution 1ns, wraps every 2199023255551ns 
 +[    0.008126] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x8a60dddf76, max_idle_ns: 440795229572 ns 
 +[    0.019420] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 15290083572 ns 
 +[    0.029108] Calibrating delay loop... 2390.01 BogoMIPS (lpj=4780032) 
 +[    0.050221] pid_max: default: 32768 minimum: 301 
 +[    0.054993] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) 
 +[    0.061718] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) 
 +[    0.069260] CPU: Testing write buffer coherency: ok 
 +[    0.074383] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 
 +[    0.080192] Setting up static identity map for 0x600082c0 - 0x60008318 
 +[    0.103339] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 
 +[    0.103391] Brought up 2 CPUs 
 +[    0.112217] SMP: Total of 2 processors activated (4780.03 BogoMIPS). 
 +[    0.118673] CPU: All CPU(s) started in SVC mode. 
 +[    0.123873] devtmpfs: initialized 
 +[    0.129213] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 
 +[    0.137189] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns 
 +[    0.147065] futex hash table entries: 512 (order: 3, 32768 bytes) 
 +[    0.153437] pinctrl core: initialized pinctrl subsystem 
 +[    0.159020] NET: Registered protocol family 16 
 +[    0.164106] DMA: preallocated 256 KiB pool for atomic coherent allocations 
 +[    0.271114] board_init_usb2: initial usb2 clock is: 000003fc 
 +[    0.276879] board_init_usb2: usb2 clock now is: 000003fd 
 +[    0.282291] board_init_usb2: initial usb2_reset_state is: 00000001 
 +[    0.288576] board_init_usb2: usb2_reset_state is set and now it is: 00000000 
 +[    0.295905] pstore: Registered ramoops as persistent store backend 
 +[    0.302196] ramoops: attached 0x10000@0x7ff0000, ecc: 0/0 
 +[    0.310614] No ATAGs? 
 +[    0.312756] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. 
 +[    0.321139] hw-breakpoint: maximum watchpoint size is 4 bytes. 
 +[    0.344921] SCSI subsystem initialized 
 +[    0.348964] usbcore: registered new interface driver usbfs 
 +[    0.354602] usbcore: registered new interface driver hub 
 +[    0.360092] usbcore: registered new device driver usb 
 +[    0.365589] i2c-gpio i2c-gpio: using pins 5 (SDA) and 4 (SCL) 
 +[    0.372247] clocksource: Switched to clocksource arm_global_timer 
 +[    0.379788] NET: Registered protocol family 2 
 +[    0.384664] TCP established hash table entries: 8192 (order: 3, 32768 bytes) 
 +[    0.391891] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) 
 +[    0.398518] TCP: Hash tables configured (established 8192 bind 8192) 
 +[    0.405038] UDP hash table entries: 512 (order: 2, 16384 bytes) 
 +[    0.411095] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) 
 +[    0.417721] NET: Registered protocol family 1 
 +[    0.436935] Unpacking initramfs... 
 +[   12.438696] Freeing initrd memory: 27924K 
 +[   12.443039] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available 
 +[   12.452182] Initialise system trusted keyring 
 +[   12.539835] Key type asymmetric registered 
 +[   12.544090] Asymmetric key parser 'x509' registered 
 +[   12.549098] io scheduler noop registered 
 +[   12.553122] io scheduler deadline registered 
 +[   12.557527] io scheduler cfq registered (default) 
 +[   12.562486] iproc_pwmc_probe iobase f085c000 phys:18031000 
 +[   12.568447] PCI host bridge /pcie@18012000 ranges: 
 +[   12.573443]   MEM 0x08000000..0x0fffffff -> 0x08000000 
 +[   12.680341] iproc-pcie 18012000.pcie: PCI host bridge to bus 0000:00 
 +[   12.686835] pci_bus 0000:00: root bus resource [bus 00-ff] 
 +[   12.692427] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff] 
 +[   12.699409] iproc-pcie 18012000.pcie: link: UP 
 +[   12.704202] PCI: bus0: Fast back to back transfers disabled 
 +[   12.710322] PCI: bus1: Fast back to back transfers disabled 
 +[   12.716123] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff] 
 +[   12.723026] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit] 
 +[   12.730453] pci 0000:00:00.0: PCI bridge to [bus 01] 
 +[   12.735520] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x080fffff] 
 +[   12.742540] PCI host bridge /pcie@18013000 ranges: 
 +[   12.747443]   MEM 0x40000000..0x47ffffff -> 0x40000000 
 +[   12.856330] iproc-pcie 18013000.pcie: PCI host bridge to bus 0001:00 
 +[   12.862847] pci_bus 0001:00: root bus resource [bus 00-ff] 
 +[   12.868439] pci_bus 0001:00: root bus resource [mem 0x40000000-0x47ffffff] 
 +[   12.875421] iproc-pcie 18013000.pcie: link: UP 
 +[   12.880212] PCI: bus0: Fast back to back transfers disabled 
 +[   12.886354] PCI: bus1: Fast back to back transfers disabled 
 +[   12.892144] pci 0001:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff] 
 +[   12.899046] pci 0001:01:00.0: BAR 0: assigned [mem 0x40000000-0x40007fff 64bit] 
 +[   12.906474] pci 0001:00:00.0: PCI bridge to [bus 01] 
 +[   12.911542] pci 0001:00:00.0:   bridge window [mem 0x40000000-0x400fffff] 
 +[   12.918780] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled 
 +[   12.925984] console [ttyS0] disabled 
 +[   12.929776] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 21, base_baud = 3906250) is a 16550 
 +[   12.938782] console [ttyS0] enabled 
 +[   12.938782] console [ttyS0] enabled 
 +[   12.945859] bootconsole [earlycon0] disabled 
 +[   12.945859] bootconsole [earlycon0] disabled 
 +[   12.954820] Trying to register dev faulty etc 
 +[   13.794128] bcm2835-rng 18033000.rng: hwrng registered 
 +[   13.799509] bcm-mdio : probed Atheros Switches bcm address = 0xf0894000, address++ = 0xf0894001, Ctrl offset = 0xf0894000, data offset = 0xf0894004 
 +[   13.813058] at24 0-0050: 8192 byte 24c64 EEPROM, writable, 32 bytes/write 
 +[   13.820718] nand: Could not find valid ONFI parameter page; aborting 
 +[   13.828274] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xd3 
 +[   13.834654] nand: Micron NAND 1GiB 3,3V 8-bit 
 +[   13.839041] nand: 1024 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 128 
 +[   13.846832] iproc_nand 18026000.nand: detected 1024MiB total, 256KiB blocks, 4KiB pages, 27B OOB, 8-bit, BCH-24 (1KiB sector) 
 +[   13.858879] Bad block table found at page 262080, version 0x01 
 +[   13.865374] Bad block table found at page 262016, version 0x01 
 +[   13.871934] 6 ofpart partitions found on MTD device brcmnand.0 
 +[   13.877795] Creating 6 MTD partitions on "brcmnand.0": 
 +[   13.882953] 0x000000000000-0x000000200000 : "U-boot" 
 +[   13.888739] 0x000000100000-0x000000400000 : "bootkernel1" 
 +[   13.894918] 0x000000400000-0x000000500000 : "senao_nvram" 
 +[   13.903332] 0x000000500000-0x000000800000 : "bootkernel2" 
 +[   13.920824] 0x000000800000-0x00003ff00000 : "ubi" 
 +[   13.934769] 0x000000000000-0x00003ff00000 : "all" 
 +[   13.948245] libphy: Fixed MDIO Bus: probed 
 +[   13.952551] tun: Universal TUN/TAP device driver, 1.6 
 +[   13.957641] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 
 +[   14.017220] PPP generic driver version 2.4.2 
 +[   14.021926] PPP BSD Compression module registered 
 +[   14.026686] PPP Deflate Compression module registered 
 +[   14.031787] NET: Registered protocol family 24 
 +[   14.036341] usbcore: registered new interface driver ax88179_178a 
 +[   14.042529] usbcore: registered new interface driver cdc_ether 
 +[   14.048488] usbcore: registered new interface driver cdc_eem 
 +[   14.054281] usbcore: registered new interface driver sierra_net 
 +[   14.060313] usbcore: registered new interface driver cdc_ncm 
 +[   14.066008] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 
 +[   14.072561] ehci-pci: EHCI PCI platform driver 
 +[   14.077076] ehci-platform: EHCI generic platform driver 
 +[   14.082468] ehci-platform 1802a000.usb: EHCI Host Controller 
 +[   14.088164] ehci-platform 1802a000.usb: new USB bus registered, assigned bus number 1 
 +[   14.096113] ehci-platform 1802a000.usb: irq 23, io mem 0x1802a000 
 +[   14.112209] ehci-platform 1802a000.usb: USB 2.0 started, EHCI 1.00 
 +[   14.118528] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 
 +[   14.125342] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 
 +[   14.132588] usb usb1: Product: EHCI Host Controller 
 +[   14.137479] usb usb1: Manufacturer: Linux 4.4.177-meraki ehci_hcd 
 +[   14.143588] usb usb1: SerialNumber: 1802a000.usb 
 +[   14.148631] hub 1-0:1.0: USB hub found 
 +[   14.152441] hub 1-0:1.0: 2 ports detected 
 +[   14.156839] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 
 +[   14.163060] ohci-platform: OHCI generic platform driver 
 +[   14.168424] ohci-platform 1802b000.usb: Generic Platform OHCI controller 
 +[   14.175169] ohci-platform 1802b000.usb: new USB bus registered, assigned bus number 2 
 +[   14.183064] ohci-platform 1802b000.usb: irq 23, io mem 0x1802b000 
 +[   14.248328] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 
 +[   14.255145] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 
 +[   14.262398] usb usb2: Product: Generic Platform OHCI controller 
 +[   14.268339] usb usb2: Manufacturer: Linux 4.4.177-meraki ohci_hcd 
 +[   14.274447] usb usb2: SerialNumber: 1802b000.usb 
 +[   14.280452] hub 2-0:1.0: USB hub found 
 +[   14.284269] hub 2-0:1.0: 2 ports detected 
 +[   14.288700] usbcore: registered new interface driver cdc_acm 
 +[   14.294388] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters 
 +[   14.302525] usbcore: registered new interface driver usb-storage 
 +[   14.308671] usbcore: registered new interface driver usbserial 
 +[   14.314589] usbcore: registered new interface driver option 
 +[   14.320223] usbserial: USB Serial support registered for GSM modem (1-port) 
 +[   14.327386] usbcore: registered new interface driver qcserial 
 +[   14.333200] usbserial: USB Serial support registered for Qualcomm USB modem 
 +[   14.340264] usbcore: registered new interface driver sierra 
 +[   14.345900] usbserial: USB Serial support registered for Sierra USB modem 
 +[   14.353027] input: gpio-buttons as /devices/platform/gpio-buttons/input/input0 
 +[   14.360480] i2c /dev entries driver 
 +[   14.382261] sp805-wdt 18039000.wdt: registration successful 
 +[   14.389215] usbcore: registered new interface driver usbhid 
 +[   14.394852] usbhid: USB HID core driver 
 +[   14.408669] meraki-config board-data: Meraki config device loaded 
 +[   14.415165] Initializing XFRM netlink socket 
 +[   14.420149] NET: Registered protocol family 10 
 +[   14.427583] sit: IPv6 over IPv4 tunneling driver 
 +[   14.432730] NET: Registered protocol family 17 
 +[   14.437292] NET: Registered protocol family 15 
 +[   14.441838] l2tp_core: L2TP core driver, V2.0 
 +[   14.446258] l2tp_ppp: PPPoL2TP kernel driver, V2.0 
 +[   14.451104] 8021q: 802.1Q VLAN Support v1.8 
 +[   14.455886] Registering SWP/SWPB emulation handler 
 +[   14.463444] Loading compiled-in X.509 certificates 
 +[   14.475373] Loaded X.509 cert 'Cisco Meraki: Auto-generated kernel signing key: 1d4f04dfeb4ce76ccd07fb941088a51b108f11c3' 
 +[   14.487249] ubi0: attaching mtd4 
 +[   15.131907] random: nonblocking pool is initialized 
 +[   19.559492] ubi0: scanning is finished 
 +[   19.575616] ubi0: attached mtd4 (name "ubi", size 1015 MiB) 
 +[   19.581246] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes 
 +[   19.588174] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 
 +[   19.595003] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 
 +[   19.602013] ubi0: good PEBs: 4060, bad PEBs: 0, corrupted PEBs: 0 
 +[   19.608154] ubi0: user volume: 5, internal volumes: 1, max. volumes count: 128 
 +[   19.615423] ubi0: max/mean erase counter: 434/414, WL threshold: 4096, image sequence number: 887924684 
 +[   19.624863] ubi0: available PEBs: 1508, total reserved PEBs: 2552, PEBs reserved for bad PEB handling: 80 
 +[   19.634607] ubi0: background thread "ubi_bgt0d" started, PID 529 
 +[   19.666002] devtmpfs: mounted 
 +[   19.669522] Freeing unused kernel memory: 232K 
 +[   19.743888] Made it into bootsh: May 18 2023 03:18:15 
 +[   19.749055] bootsh build wired-18-1-07-202305180002-G459e6ab6-rel-pressurisation 
 +[   19.826006] UBIFS (ubi0:3): background thread "ubifs_bgt0_3" started, PID 609 
 +[   20.004665] UBIFS (ubi0:3): UBIFS: mounted UBI device 0, volume 3, name "storage" 
 +[   20.012184] UBIFS (ubi0:3): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes 
 +[   20.022142] UBIFS (ubi0:3): FS size: 534061056 bytes (509 MiB, 2103 LEBs), journal size 26664960 bytes (25 MiB, 105 LEBs) 
 +[   20.033130] UBIFS (ubi0:3): reserved for root: 4952683 bytes (4836 KiB) 
 +[   20.039772] UBIFS (ubi0:3): media format: w4/r0 (latest is w4/r0), UUID 6706698C-D875-4966-8592-AD7EB49CA65D, small LPT model 
 +In manufacturing: FALSE 
 +In rma mode: FALSE 
 +[   20.604596] early_init: meraki_alamow 600-47015-A, (28) Alamo, 1, Q2RN-QP7V-B9Y2, E0:CB:BC:20:34:80, arch:arm, board:wired-arm-nsp, hw:MX65, pid:617, ppid:615, fd1:/early_init.log, fd2:g 
 +[   20.630313] early_init done 
 +WARNING! THIS CONSOLE IS LOGGED! UNAUTHORIZED ACCESS FORBIDDEN! 
 +<Meraki> [   21.085129] S05diagnostic: meraki_alamow 600-47015-A, (28) Alamo, 1, Q2RN-QP7V-B9Y2, E0:CB:BC:20:34:80, arch:arm, board:wired-arm-nsp, hw:MX65, pid:681, ppid:679, fd1:/dev/kmsgg 
 +[   21.108652] S05diagnostic done 
 +[   21.533164] S10boot: meraki_alamow 600-47015-A, (28) Alamo, 1, Q2RN-QP7V-B9Y2, E0:CB:BC:20:34:80, arch:arm, board:wired-arm-nsp, hw:MX65, pid:746, ppid:679, fd1:/dev/kmsg, fd2:/dev/kmsg 
 +[   21.598611] cp: can't stat '/run/*': No such file or directory 
 +[   21.726598] Quick boot reason lookup:  
 +[   21.755770] No valid safe config available or fallback disabled, remove unsafe config 
 +[   21.799491] ip_local_port_range: prefer different parity for start/end values. 
 +[   21.807512] sysctl: error: 'vm.extfrag_threshold' is an unknown key 
 +[   21.829202] ICMPv6: process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.base_reachable_time - use net.ipv6.neigh.default.base_reachable_time_ms instead 
 +[   21.896812] cat: can't open '/LINUX_KFOM_VERSION': No such file or directory 
 +[   23.041167] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready 
 +[   23.048623] device eth0 entered promiscuous mode 
 +[   23.055037] Cannot change rx-checksumming 
 +[   23.062050] Actual changes: 
 +[   23.064939] scatter-gather: off 
 +[   23.064939]  tx-scatter-gather: off 
 +[   23.064939] generic-segmentation-offload: off [requested on] 
 +[   23.078648] Cannot change tcp-segmentation-offload 
 +[   23.086284] Cannot change rx-vlan-offload 
 +[   23.091727] Cannot change tx-vlan-offload 
 +[   23.677160] !!!!! {meraki_watchdog} meraki_watchdog set hardware watchdog timeout to 69 
 +[   23.687495] vm.panic_on_oom = 1 
 +[   23.690962] [1970-01-01 00:00:23.610] +sysctl -w vm.panic_on_oom=1 
 +[   23.756751] ntdp: loading out-of-tree module taints kernel. 
 +[   23.762377] ntdp: module license 'Copyright (c) 2014-2020 by cisco Systems, Inc.' taints kernel. 
 +[   23.771195] Disabling lock debugging due to kernel taint 
 +[   24.313210] bgmac-enet 18024000.ethernet eth0: Link is Up - 10Mbps/Half - flow control off 
 +[   24.321582] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 
 +[   24.326050] NTKM - ntkm_init                      - Nitro KM loaded 
 +[   25.080816] click: starting router thread pid 1151 (ed27ca00) 
 +[   28.918281] Single synchronous check for reset 
 +[   33.893143] vmap allocation for size 4669440 failed: use vmalloc=<size> to increase size. 
 +[   33.901359] vmalloc: allocation failure: 4664233 bytes 
 +[   33.906518] insmod: page allocation failure: order:0, mode:0x24000c0 
 +[   33.912902] CPU: 0 PID: 1184 Comm: insmod Tainted: P              4.4.177-meraki #1 
 +[   33.920752] Hardware name: Meraki MX65 
 +[   33.924533] [<c00166a0>] (unwind_backtrace) from [<c0011ffc>] (show_stack+0x10/0x14) 
 +[   33.932308] [<c0011ffc>] (show_stack) from [<c018c63c>] (dump_stack+0x7c/0x98) 
 +[   33.939556] [<c018c63c>] (dump_stack) from [<c0098850>] (warn_alloc_failed+0xe8/0x114) 
 +[   33.947505] [<c0098850>] (warn_alloc_failed) from [<c00babec>] (__vmalloc_node_range+0x1d4/0x1f0) 
 +[   33.956403] [<c00babec>] (__vmalloc_node_range) from [<c0013110>] (module_alloc+0x48/0xa4) 
 +[   33.964687] [<c0013110>] (module_alloc) from [<c007dd08>] (load_module+0x714/0x1bdc) 
 +[   33.972451] [<c007dd08>] (load_module) from [<c007f360>] (SyS_finit_module+0x60/0x68) 
 +[   33.980304] [<c007f360>] (SyS_finit_module) from [<c000e9e0>] (ret_fast_syscall+0x0/0x48) 
 +[   33.988519] Mem-Info: 
 +[   33.990805] active_anon:3624 inactive_anon:20421 isolated_anon:
 +[   33.990805]  active_file:23 inactive_file:26 isolated_file:
 +[   33.990805]  unevictable:0 dirty:2 writeback:0 unstable:
 +[   33.990805]  slab_reclaimable:229 slab_unreclaimable:1945 
 +[   33.990805]  mapped:1251 shmem:23334 pagetables:58 bounce:0 
 +[   33.990805]  free:486546 free_pcp:509 free_cma:
 +[   34.023500] Normal free:703544kB min:3428kB low:4284kB high:5140kB active_anon:5464kB inactive_anon:28196kB active_file:80kB inactive_file:84kB unevictable:0kB isolated(anon):0kB isolato 
 +[   34.067919] lowmem_reserve[]: 0 10239 10239 
 +[   34.072196] HighMem free:1242640kB min:512kB low:2036kB high:3564kB active_anon:9032kB inactive_anon:53488kB active_file:12kB inactive_file:20kB unevictable:0kB isolated(anon):0kB isolao 
 +[   34.116113] lowmem_reserve[]: 0 0 0 
 +[   34.119648] Normal: 3*4kB (UE) 1*8kB (M) 3*16kB (UME) 0*32kB 5*64kB (UME) 6*128kB (UM) 5*256kB (ME) 11*512kB (UME) 3*1024kB (UM) 4*2048kB (ME) 167*4096kB (M) = 703364kB 
 +[   34.134949] HighMem: 94*4kB (M) 27*8kB (M) 8*16kB (UM) 6*32kB (UM) 5*64kB (M) 3*128kB (M) 4*256kB (UM) 4*512kB (UM) 3*1024kB (UM) 1*2048kB (U) 301*4096kB (UM) = 1242704kB 
 +[   34.150416] 23383 total pagecache pages 
 +[   34.154262] 524272 pages RAM 
 +[   34.157160] 327664 pages HighMem/MovableOnly 
 +[   34.161442] 5766 pages reserved 
 +[   34.205854] wl_module_init: msglevel set to 0x1 
 +[   34.210420] wl_module_init: msglevel2 set to 0x0 
 +[   34.215055] wl_module_init: emsglevel set to 0x0 
 +[   34.219694] wl_module_init: phymsglevel set to 0x1 
 +[   34.224556] wl_pci_probe: bus 1 slot 0 func 0 irq 66 
 +[   34.229537] wl_pci_probe: supported vendor 14e4 device 4360 
 +[   34.235135] pci 0000:00:00.0: enabling device (0140 -> 0142) 
 +[   34.240823] wl 0000:01:00.0: enabling device (0140 -> 0142) 
 +[   34.246416] wl_pci_probe: Enabled device 1-0_0 
 +[   34.250879] wl0: online cpus 2 
 +[   34.253990] Found chip type AI (0x15134352) 
 +[   34.258296] Chipc: rev 43, caps 0x58680001, chipst 0x824d pmurev 17, pmucaps 0x10a22b11 
 +[   34.266752] initvars_cis_pci: Not CIS format 
 +[   34.294673] sprom_read_pci: bad crc 
 +[   34.332456] sprom_read_pci: bad crc 
 +[   34.346070] sprom_read_pci: bad crc 
 +[   34.352524] sprom_read_pci: bad crc 
 +[   34.356020] srom rev:0 
 +[   34.358781] Overriding boardtype: 0x661 instead of 0x4360 
 +[   34.364280] ChangeVCO => vco:960, xtalF:40, frac: 98, ndivMode: 3, ndivint: 24 
 +[   34.371523] Data written into the PLL_CNTRL_ADDR2: 00000c31 
 +[   34.377116] Data written into the PLL_CNTRL_ADDR3 (Fractional): 0000100e 
 +[   34.383848] si_pmu_enb_slow_clk: Not supported 17 
 +[   34.388574] Changing rsrc 6 res_updn_timer to 0x200001 
 +[   34.393756] Changing max_res_mask to 0x1ff 
 +[   34.401157] ALP in KHz is 40000, cur PM_REG_VAL is 0, new PM_REG_VAL is 50 
 +[   34.408094] wl0: wlc_attach: Overriding device id: 0x43a1 instead of 0x4360 
 +[   34.415141] Overriding device id = 0x43a1 
 +[   34.419388] wlc_bmac_attach, deviceid 0x43a1 nbands 1 
 +[   34.424459] wlc_bmac_attach: Disabling HW TKIP! 
 +[   34.441077] wl0: wlc_bmac_attach: chiprev 3 corerev 42 cccap 0x58680001 maccap 0x30518c05 band 2.4G, phy_type 11 phy_rev 1 
 +[   34.456954] wl0: wlc_ampdu_tx_set: AGG Mode = MAC+AQM txmaxpkts 512 
 +[   34.464969] wl0: wlc_update_bwcap: bandtype 1, NBANDS 1, deviceid 17313 
 +[   34.471686] Using Wireless Extension 
 +[   34.475965] apr0v0: Broadcom BCM4360 802.11 Wireless Controller 10.10.80.8_e5.1.4.3 (r699630 WLTEST) 
 +[   34.485209] wl_pci_probe: bus 1 slot 0 func 0 irq 67 
 +[   34.490202] wl_pci_probe: supported vendor 14e4 device 4360 
 +[   34.495809] pci 0001:00:00.0: enabling device (0140 -> 0142) 
 +[   34.501491] wl 0001:01:00.0: enabling device (0140 -> 0142) 
 +[   34.507082] wl_pci_probe: Enabled device 1-0_0 
 +[   34.511540] wl1: online cpus 2 
 +[   34.514653] Found chip type AI (0x15134352) 
 +[   34.518959] Chipc: rev 43, caps 0x58680001, chipst 0x824d pmurev 17, pmucaps 0x10a22b11 
 +[   34.527024] nvram_init: called again without calling nvram_exit() 
 +[   34.533192] initvars_cis_pci: Not CIS format 
 +[   34.561099] sprom_read_pci: bad crc 
 +[   34.598869] sprom_read_pci: bad crc 
 +[   34.612486] sprom_read_pci: bad crc 
 +[   34.618933] sprom_read_pci: bad crc 
 +[   34.622437] srom rev:0 
 +[   34.625292] nvram_get_internal: variable boardtype defaulted to 0xffff 
 +[   34.631853] nvram_get_internal: variable boardrev defaulted to 0x10 
 +[   34.638196] ChangeVCO => vco:960, xtalF:40, frac: 98, ndivMode: 3, ndivint: 24 
 +[   34.645437] Data written into the PLL_CNTRL_ADDR2: 00000c31 
 +[   34.651033] Data written into the PLL_CNTRL_ADDR3 (Fractional): 0000100e 
 +[   34.657761] si_pmu_enb_slow_clk: Not supported 17 
 +[   34.662489] Changing rsrc 6 res_updn_timer to 0x200001 
 +[   34.667668] Changing max_res_mask to 0x1ff 
 +[   34.675072] ALP in KHz is 40000, cur PM_REG_VAL is 0, new PM_REG_VAL is 50 
 +[   34.681991] wl1: wlc_attach: Overriding device id: 0x43a2 instead of 0x4360 
 +[   34.689028] Overriding device id = 0x43a2 
 +[   34.693218] nvram_get_internal: variable boardrev defaulted to 0x10 
 +[   34.699537] wlc_bmac_attach, deviceid 0x43a2 nbands 1 
 +[   34.704611] wlc_bmac_attach: Disabling HW TKIP! 
 +[   34.717487] wl1: wlc_bmac_attach: chiprev 3 corerev 42 cccap 0x58680001 maccap 0x30518c05 band 5G, phy_type 11 phy_rev 1 
 +[   34.730869] wl1: wlc_stf_phy_chain_calc_set: wrong txchain setting 7 for 4352. Correct it to 3 
 +[   34.739528] wl1: wlc_stf_phy_chain_calc_set: wrong rxchain setting 7 for 4352. Correct it to 3 
 +[   34.748467] wl1: wlc_ampdu_tx_set: AGG Mode = MAC+AQM txmaxpkts 512 
 +[   34.758078] wl1: No regulatory class assigned for US channel 144 
 +[   34.764337] wl1: wlc_update_bwcap: bandtype 2, NBANDS 1, deviceid 17314 
 +[   34.771046] Using Wireless Extension 
 +[   34.775282] apr1v0: Broadcom BCM4360 802.11 Wireless Controller 10.10.80.8_e5.1.4.3 (r699630 WLTEST) 
 +[   34.979505]  
 +[   34.985964] boot 83 build wired-18-1-07-202305180002-G459e6ab6-rel-pressurisation board wired-arm-nsp mac E0:CB:BC:20:34:80 
 +[   35.003845] Module: dummy .text=0xbf000000 .data=0xbf000620 .bss= 
 +[   35.010248] Module: ntdp .text=0xbf004000 .data=0xbf0cc718 .bss=0xbf0ccec0 
 +[   35.017364] Module: proclikefs .text=0xbf172000 .data= .bss=0xbf172d80 
 +[   35.024142] Module: merakiclick .text=0xbf177000 .data=0xbf32822c .bss=0xbf328580 
 +[   35.031899] Module: elts_meraki .text=0xbf4a5000 .data=0xbf96f28c .bss=0xbf972c00 
 +[   35.039612] Module: wl .text=0xf1001000 .data=0xf13a18c0 .bss=0xf1419840 
 +[   35.053675] S10boot done 
 +[   35.477280] S80meraki: meraki_alamow 600-47015-A, (28) Alamo, 1, Q2RN-QP7V-B9Y2, E0:CB:BC:20:34:80, arch:arm, board:wired-arm-nsp, hw:MX65, pid:1390, ppid:679, fd1:/dev/kmsg, fd2:/dev/kg 
 +[   35.531650] RUNIT: installed, starting runsvdir... 
 +[   35.780701] ok: run: strongswan_meraki_log_trailer: (pid 1666) 0s, normally down 
 +[   35.806384] ok: run: strongswan_log_trailer: (pid 1668) 0s, normally down 
 +[   35.845757] udevd[1548]: starting version 3.2.2 
 +[   35.877602] udevd[1548]: specified group 'tty' unknown 
 +[   35.904610] udevd[1548]: specified group 'dialout' unknown 
 +[   35.920451] udevd[1548]: specified group 'kmem' unknown 
 +[   35.936488] udevd[1548]: specified group 'input' unknown 
 +[   35.952400] udevd[1548]: specified group 'video' unknown 
 +[   35.970434] udevd[1548]: specified group 'audio' unknown 
 +[   35.984484] udevd[1548]: specified group 'lp' unknown 
 +[   36.000467] udevd[1548]: specified group 'disk' unknown 
 +[   36.012385] udevd[1548]: specified group 'cdrom' unknown 
 +[   36.020419] udevd[1548]: specified group 'tape' unknown 
 +[   36.035865] udevd[1548]: starting eudev-3.2.2 
 +[   36.056481] !!!!! {/usr/bin/list_updater} reading /tmp/brain_state failed, error 2 (No such file or directory) 
 +[   36.542295] down: /service/baykok: 1s; run: log: (pid 1494) 1s 
 +[   36.550327] 1s; run: log: (pid 1517) 1s 
 +[   36.550327] run: /service/snort_event_server: (pid 1538) 1s; run: log: (pid 1537) 1s 
 +[   36.550327] down: /service/start_cellular: 1s; run: log: (pid 1512) 1s 
 +[   36.550327] down: /service/strongswan: 1s; run: log: (pid 1541) 1s 
 +[   36.550327] run: /service/strongswan_log_trailer: (pid 1668) 1s, normally down 
 +[   36.550327] down: /service/strongswan_meraki: 1s; run: log: (pid 1550) 1s 
 +[   36.550327] run: /service/strongswan_meraki_log_trailer: (pid 1666) 1s, normally down 
 +[   36.550327] run: /service/top: (pid 1497) 1s; run: log: (pid 1496) 1s 
 +[   36.550327] run: /service/ubusd: (pid 1503) 1s; run: log: (pid 1502) 1s 
 +[   36.550327] down: /service/uclick: 1s; run: log: (pid 1543) 1s 
 +[   36.550327] down: /service/uclickfs: 1s; run: log: (pid 1507) 1s 
 +[   36.550327] run: /service/udev: (pid 1548) 1s; run: log: (pid 1547) 1s 
 +[   36.550327] down: /service/xl2tpd: 1s; run: log: (pid 1559) 1s 
 +[   36.641493] RUNIT: runsvdir has launched all supervisors 
 +[   36.670771] not unlocked 
 +[   36.680704] No hardware support for TAM on this device 
 +[   36.687699] ln: /usr/bin/slowfcgi: File exists 
 +[   50.472863] chatter: CheckIPHeader@2661: IP header check failed: bad IP version 
 +[   50.480333] chatter: to_snort/CheckIPHeader@4: IP header check failed: bad IP version 
 +[   50.488402] chatter: CheckIPHeader@2687: IP header check failed: bad IP version 
 +[   50.624016] Changing rsrc 6 res_updn_timer to 0x200001 
 +[   50.629214] Changing max_res_mask to 0x1ff 
 +[   50.635395] ALP in KHz is 40000, cur PM_REG_VAL is 0, new PM_REG_VAL is 50 
 +[   50.642354] ALP in KHz is 40000, cur PM_REG_VAL is 0, new PM_REG_VAL is 50 
 +[   50.654371] wl0: CORE INIT : nfifo 6 mu_tx_enab 0 
 +[   50.660790] wl0: CORE INIT : mode 0 pktclassify 0 rxsplit 0  hdr conve 0 DMA_CT Disabled 
 +[   50.699393] wl0: wlc_enable_probe_req: state down, deferring setting of host flags 
 +[   51.011457] wl0: _wl_add_meraki_monitor_if 
 +[   51.080565] Changing rsrc 6 res_updn_timer to 0x200001 
 +[   51.085764] Changing max_res_mask to 0x1ff 
 +[   51.091935] ALP in KHz is 40000, cur PM_REG_VAL is 0, new PM_REG_VAL is 50 
 +[   51.098888] ALP in KHz is 40000, cur PM_REG_VAL is 0, new PM_REG_VAL is 50 
 +[   51.110937] wl0: CORE INIT : nfifo 6 mu_tx_enab 0 
 +[   51.117390] wl0: CORE INIT : mode 0 pktclassify 0 rxsplit 0  hdr conve 0 DMA_CT Disabled 
 +[   51.154934] wl0: wlc_enable_probe_req: state down, deferring setting of host flags 
 +[   52.771773] wl1: No regulatory class assigned for AU channel 138 
 +[   52.777814] wl1: No regulatory class assigned for AU channel 140 
 +[   52.783846] wl1: No regulatory class assigned for AU channel 144 
 +[   52.789871] wl1: No regulatory class assigned for AU channel 144 
 +[   52.795903] wl1: No regulatory class assigned for AU channel 149 
 +[   52.801931] wl1: No regulatory class assigned for AU channel 149 
 +[   52.807954] wl1: No regulatory class assigned for AU channel 153 
 +[   52.813984] wl1: No regulatory class assigned for AU channel 153 
 +[   52.820013] wl1: No regulatory class assigned for AU channel 155 
 +[   52.826040] wl1: No regulatory class assigned for AU channel 157 
 +[   52.832064] wl1: No regulatory class assigned for AU channel 157 
 +[   52.838086] wl1: No regulatory class assigned for AU channel 161 
 +[   52.844109] wl1: No regulatory class assigned for AU channel 161 
 +[   52.850133] wl1: No regulatory class assigned for AU channel 165 
 +[   52.864561] Changing rsrc 6 res_updn_timer to 0x200001 
 +[   52.869753] Changing max_res_mask to 0x1ff 
 +[   52.875937] ALP in KHz is 40000, cur PM_REG_VAL is 0, new PM_REG_VAL is 50 
 +[   52.882895] ALP in KHz is 40000, cur PM_REG_VAL is 0, new PM_REG_VAL is 50 
 +[   52.894907] wl1: CORE INIT : nfifo 6 mu_tx_enab 0 
 +[   52.901298] wl1: CORE INIT : mode 0 pktclassify 0 rxsplit 0  hdr conve 0 DMA_CT Disabled 
 +[   52.940614] wl1: wlc_enable_probe_req: state down, deferring setting of host flags 
 +[   53.265651] wl1: _wl_add_meraki_monitor_if 
 +[   53.332821] Changing rsrc 6 res_updn_timer to 0x200001 
 +[   53.338018] Changing max_res_mask to 0x1ff 
 +[   53.344198] ALP in KHz is 40000, cur PM_REG_VAL is 0, new PM_REG_VAL is 50 
 +[   53.351152] ALP in KHz is 40000, cur PM_REG_VAL is 0, new PM_REG_VAL is 50 
 +[   53.363189] wl1: CORE INIT : nfifo 6 mu_tx_enab 0 
 +[   53.369600] wl1: CORE INIT : mode 0 pktclassify 0 rxsplit 0  hdr conve 0 DMA_CT Disabled 
 +[   53.408462] wl1: wlc_enable_probe_req: state down, deferring setting of host flags 
 +[   53.832664] chatter: from_bird :: FromHost: device 'bird' went down 
 +[   53.839046] chatter: to_bird :: ToHost: device 'bird' went down 
 +[   53.874289] chatter: from_bird :: FromHost: device 'bird' came up 
 +[   53.880466] chatter: to_bird :: ToHost: device 'bird' came up 
 +[   53.969318] chatter: from_bird_autovpn0 :: FromHost: device 'bird_autovpn0' went down 
 +[   53.977275] chatter: to_bird_autovpn0 :: ToHost: device 'bird_autovpn0' went down 
 +[   54.054682] chatter: from_bird_autovpn0 :: FromHost: device 'bird_autovpn0' came up 
 +[   54.062425] chatter: to_bird_autovpn0 :: ToHost: device 'bird_autovpn0' came up 
 +[   54.236749] chatter: from_bird_autovpn1 :: FromHost: device 'bird_autovpn1' went down 
 +[   54.244723] chatter: to_bird_autovpn1 :: ToHost: device 'bird_autovpn1' went down 
 +[   54.286368] chatter: from_bird_autovpn1 :: FromHost: device 'bird_autovpn1' came up 
 +[   54.294109] chatter: to_bird_autovpn1 :: ToHost: device 'bird_autovpn1' came up 
 +[   54.400696] chatter: from_bird_misc :: FromHost: device 'bird_misc' went down 
 +[   54.407899] chatter: to_bird_misc :: ToHost: device 'bird_misc' went down 
 +[   54.442406] chatter: from_bird_misc :: FromHost: device 'bird_misc' came up 
 +[   54.449440] chatter: to_bird_misc :: ToHost: device 'bird_misc' came up 
 +[   54.555376] device uplink entered promiscuous mode 
 +[   54.560220] device bird_misc entered promiscuous mode 
 +[   54.597437] device client_vpn entered promiscuous mode 
 +[   54.641739] device anyconnect_vpn entered promiscuous mode 
 +[   54.696759] chatter: from_pimd_lan :: FromHost: device 'pimd-lan' went down 
 +[   54.703785] chatter: to_pimd_lan :: ToHost: device 'pimd-lan' went down 
 +[   54.742307] chatter: from_pimd_lan :: FromHost: device 'pimd-lan' came up 
 +[   54.749173] chatter: to_pimd_lan :: ToHost: device 'pimd-lan' came up 
 +[   54.880498] chatter: from_pimd_vpn :: FromHost: device 'pimd-vpn' went down 
 +[   54.887534] chatter: to_pimd_vpn :: ToHost: device 'pimd-vpn' went down 
 +[   54.922299] chatter: from_pimd_vpn :: FromHost: device 'pimd-vpn' came up 
 +[   54.929187] chatter: to_pimd_vpn :: ToHost: device 'pimd-vpn' came up 
 +[   55.080565] !!!!! {/usr/bin/wired_brain} Resetting ClickController! 
 +[   55.195190] !!!!! {wired_brain} [brain:switch] Missing DEVNO mapping for SNMP port 6, 'apr0' 
 +[   55.203872] !!!!! {wired_brain} [brain:switch] Missing DEVNO mapping for SNMP port 7, 'apr1' 
 +[   55.294638] wl0: 1 packets not freed at wlc_down. MBSS=2 
 +[   55.302085] ALP in KHz is 40000, cur PM_REG_VAL is 0, new PM_REG_VAL is 50 
 +[   55.310357] wl0: CORE INIT : nfifo 6 mu_tx_enab 0 
 +[   55.316793] wl0: CORE INIT : mode 0 pktclassify 0 rxsplit 0  hdr conve 0 DMA_CT Disabled 
 +[   55.343735] wl0: wlc_enable_probe_req: state down, deferring setting of host flags 
 +[   55.410843] wl1: 1 packets not freed at wlc_down. MBSS=2 
 +[   55.418177] ALP in KHz is 40000, cur PM_REG_VAL is 0, new PM_REG_VAL is 50 
 +[   55.426445] wl1: CORE INIT : nfifo 6 mu_tx_enab 0 
 +[   55.432889] wl1: CORE INIT : mode 0 pktclassify 0 rxsplit 0  hdr conve 0 DMA_CT Disabled 
 +[   55.467025] wl1: wlc_enable_probe_req: state down, deferring setting of host flags 
 +[   58.982851] S80meraki done 
 +[   59.210274] !!!!! {/usr/bin/config_updater} failsafe_mode "value='0' state='0' bootloop='0' ver='1' " "" 
 +[   78.152247] NTKM - ntkm_activate                  - Activating DP 
 +[   81.052554] NTKM - ntkm_check_for_state_change    - DP active 
 +[   87.737563] !!!!! {wired_brain} [brain:routing:vpn] No IPv6 client_vpn route? 
 +[   91.269785] chatter: from_linux_test_client :: FromHost: device 'test_client' went down 
 +[   91.277870] chatter: _to_linux_test_client :: ToHost: device 'test_client' went down 
 +[   91.288610] chatter: nat/from_host_nat_routing :: IP4RouteTableSetReferencePaint: no route for 208.67.220.220 
 +[   91.816834] device vlan1 entered promiscuous mode 
 +[   91.821601] device bird entered promiscuous mode 
 +[   91.850656] device vlan2 entered promiscuous mode 
 +[   91.889887] device vlan3 entered promiscuous mode 
 +[   91.922004] device vlan999 entered promiscuous mode 
 +[   92.804001] wl0: 1 packets not freed at wlc_down. MBSS=2 
 +[   92.812383] ALP in KHz is 40000, cur PM_REG_VAL is 0, new PM_REG_VAL is 50 
 +[   92.820705] wl0: CORE INIT : nfifo 6 mu_tx_enab 0 
 +[   92.827605] wl0: CORE INIT : mode 0 pktclassify 0 rxsplit 0  hdr conve 0 DMA_CT Disabled 
 +[   92.855482] wl0: wlc_enable_probe_req: state down, deferring setting of host flags 
 +[   92.943959] <1>ToDevice apr1v2 is full, packet delayed 
 +[   92.961290] wl1: 1 packets not freed at wlc_down. MBSS=2 
 +[   92.968980] ALP in KHz is 40000, cur PM_REG_VAL is 0, new PM_REG_VAL is 50 
 +[   92.977381] wl1: CORE INIT : nfifo 6 mu_tx_enab 0 
 +[   92.987965] wl1: CORE INIT : mode 0 pktclassify 0 rxsplit 0  hdr conve 0 DMA_CT Disabled 
 +[   93.023231] wl1: wlc_enable_probe_req: state down, deferring setting of host flags 
 +[  118.215817] chatter: wan0_ip6_fixture/dhcp6_client :: DHCP6Client: interface wired0:0 not ready for DHCPv6, enqueuing... (exists:0, ready:-1, ip6_disabled:-1) 
 +[  119.479104] chatter: wan1_ip6_fixture/dhcp6_client :: DHCP6Client: interface wired1:0 not ready for DHCPv6, enqueuing... (exists:0, ready:-1, ip6_disabled:-1) 
 +[  125.505150] <1>ToDevice mon1 is full, packet delayed 
 +[  139.057514] <1>ToDevice mon0 is full, packet delayed 
 +</nowiki>
 </WRAP>\\ </WRAP>\\
  
-==== OpenWrt bootlog ====+==== OpenWrt SNAPSHOT bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</nowiki>+<nowiki>U-Boot 2012.10 (May 04 2022 - 23:46:39)Meraki MX64 Boot Kernel Loader 
 + 
 +DEV ID = 0xcf1e 
 +PCIE CFG DEV ID = 0x8025 
 +OTP offset(0x8): 0x78f01c01 
 +OTP offset(0x9): 0xfe400818 
 +OTP offset(0xa): 0xc01b0 
 +OTP offset(0xb): 0x0 
 +OTP offset(0xc): 0x4a00000 
 +OTP offset(0xd): 0xffede250 
 +OTP offset(0xe): 0x1135d17f 
 +OTP offset(0xf): 0x4000 
 +NSP25 32bit DDR 
 +SKU ID = 0x0 
 +DDR type: DDR3 
 +MEMC 0 DDR speed = 800MHz 
 +ddr_init2: Calling soc_ddr40_set_shmoo_dram_config 
 +ddr_init2: Calling soc_ddr40_phy_calibrate 
 +C01. Check Power Up Reset_Bar 
 +C02. Config and Release PLL from reset 
 +C03. Poll PLL Lock 
 +C04. Calibrate ZQ (ddr40_phy_calib_zq) 
 +C05. DDR PHY VTT On (Virtual VTT setup) DISABLE all Virtual VTT 
 +C06. DDR40_PHY_DDR3_MISC 
 +C07. VDL Calibration 
 +C07.1 
 +C07.2 
 +C07.4 
 +C07.4.1 
 +C07.4.4 
 +VDL calibration result: 0x30000003 (cal_steps = 0) 
 +C07.4.5 
 +C07.4.6 
 +C07.5 
 +C08. DDR40_PHY_DDR3_MISC : Start DDR40_PHY_RDLY_ODT.... 
 +C09. Start ddr40_phy_autoidle_on (MEM_SYS_PARAM_PHY_AUTO_IDLE) .... 
 +C10. Wait for Phy Ready 
 +Programming controller register 
 +ddr_init2: Calling soc_ddr40_shmoo_ctl 
 +Validate Shmoo parameters stored in flash ..... OK 
 +Press Ctrl-C to run Shmoo ..... skipped 
 +Restoring Shmoo parameters from flash ..... done 
 +Running simple memory test ..... OK 
 +DDR Tune Completed 
 +DRAM:  2 GiB 
 +WARNING: Caches not enabled 
 +NAND:   Micron MT29F8G08ABACA, Found strap type 0x6 strap page 0x2 
 +256 KiB blocks, 4 KiB pages, 27B OOB, 8-bit 
 +NAND:   chipsize 1024 MiB 
 +*** Warning - bad CRC, using default environment 
 + 
 +In:    serial 
 +Out:   serial 
 +Err:   serial 
 +arm_clk=1200MHz, axi_clk=600MHz, apb_clk=300MHz, arm_periph_clk=600MHz 
 +Enabling icache and dcache 
 +Enabling l2cache 
 +Registering eth 
 +Broadcom BCM IPROC Ethernet driver 0.1 
 +Using GMAC2 (0x18024000) 
 +ERROR: could not get env ethaddr 
 +et0: ethHw_chipAttach: Chip ID: 0xcf1e; phyaddr: 0x1e 
 +bcm_robo_attach: devid: 0x10 
 +robo_serdes_reset_core page(0x16) id2(0x3ff) 
 +robo_serdes_init page(0x16) id0(0x4281) id1(0x4fc0) id2(0x3ff) 
 +robo_serdes_init access page4 via page5 lane1 
 +robo_serdes_init page(0x16) id0(0x4281) id1(0x4fc0) id2(0x3ff) 
 +robo_serdes_init set back to lane0 
 +Hit any key to stop autoboot:  0  
 +UBI: attaching mtd1 to ubi0 
 +UBI: physical eraseblock size:   262144 bytes (256 KiB) 
 +UBI: logical eraseblock size:    253952 bytes 
 +UBI: smallest flash I/O unit:    4096 
 +UBI: VID header offset:          4096 (aligned 4096) 
 +UBI: data offset:                8192 
 +UBI: attached mtd1 to ubi0 
 +UBI: MTD device name:            "mtd=0" 
 +UBI: MTD device size:            1015 MiB 
 +UBI: number of good PEBs:        4060 
 +UBI: number of bad PEBs:         0 
 +UBI: max. allowed volumes:       128 
 +UBI: wear-leveling threshold:    4096 
 +UBI: number of internal volumes: 1 
 +UBI: number of user volumes:     8 
 +UBI: available PEBs:             40 
 +UBI: total number of reserved PEBs: 4020 
 +UBI: number of PEBs reserved for bad PEB handling: 40 
 +UBI: max/mean erase counter: 434/414 
 +Read 0 bytes from volume kernel to 90000000 
 +No size specified -> Using max size (3301376) 
 +## Booting kernel from FIT Image at 90000000 ... 
 +   Using 'config@3' configuration 
 +   Trying 'kernel-1' kernel subimage 
 +     Description:  ARM OpenWrt Linux-6.6.58 
 +     Type:         Kernel Image 
 +     Compression:  gzip compressed 
 +     Data Start:   0x900000e4 
 +     Data Size:    3159860 Bytes = 3 MiB 
 +     Architecture: ARM 
 +     OS:           Linux 
 +     Load Address: 0x60008000 
 +     Entry Point:  0x60008000 
 +     Hash algo:    crc32 
 +     Hash value:   9a50dcc6 
 +     Hash algo:    sha1 
 +     Hash value:   531719c2b6f04dbe3c54b6180cb9667d1f5ab5b9 
 +   Verifying Hash Integrity ... crc32+ sha1+ OK 
 +## Flattened Device Tree from FIT Image at 90000000 
 +   Using 'config@3' configuration 
 +   Trying 'fdt-1' FDT blob subimage 
 +     Description:  ARM OpenWrt meraki_mx65 device tree blob 
 +     Type:         Flat Device Tree 
 +     Compression:  uncompressed 
 +     Data Start:   0x90303950 
 +     Data Size:    16423 Bytes = 16 KiB 
 +     Architecture: ARM 
 +     Hash algo:    crc32 
 +     Hash value:   963fc6b6 
 +     Hash algo:    sha1 
 +     Hash value:   813b74f41afde8c6f2626bce9fa2813ca39fe74a 
 +   Verifying Hash Integrity ... crc32+ sha1+ OK 
 +   Booting using the fdt blob at 0x90303950 
 +   Uncompressing Kernel Image ... OK 
 +boot_prep_linux commandline: console=ttyS0,115200n8 earlyprintk 
 +   Loading Device Tree to dfccd000, end dfcd4026 ... OK 
 + 
 +Starting kernel ... 
 + 
 +[    0.000000] Booting Linux on physical CPU 0x0 
 +[    0.000000] Linux version 6.6.58 (debian-12-buildopenwrt) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 13.3.0 r27964-a0eafc3c77) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Mon O4 
 +[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d 
 +[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache 
 +[    0.000000] OF: fdt: Machine model: Cisco Meraki MX65 
 +[    0.000000] printk: bootconsole [earlycon0] enabled 
 +[    0.000000] Memory policy: Data cache writealloc 
 +[    0.000000] Hit pending asynchronous external abort (FSR=0x00001c06) during first unmask, this is most likely caused by a firmware/bootloader bug. 
 +[    0.000000] Zone ranges: 
 +[    0.000000]   Normal   [mem 0x0000000060000000-0x000000008fffffff] 
 +[    0.000000]   HighMem  [mem 0x0000000090000000-0x00000000dffeffff] 
 +[    0.000000] Movable zone start for each node 
 +[    0.000000] Early memory node ranges 
 +[    0.000000]   node   0: [mem 0x0000000060000000-0x00000000dffeffff] 
 +[    0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x00000000dffeffff] 
 +[    0.000000] percpu: Embedded 12 pages/cpu s17556 r8192 d23404 u49152 
 +[    0.000000] Kernel command line: console=ttyS0,115200n8 earlyprintk 
 +[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) 
 +[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) 
 +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 522544 
 +[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off 
 +[    0.000000] Memory: 2066532K/2097088K available (7165K kernel code, 595K rwdata, 1728K rodata, 1024K init, 290K bss, 30556K reserved, 0K cma-reserved, 1310624K highmem) 
 +[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 
 +[    0.000000] rcu: Hierarchical RCU implementation. 
 +[    0.000000] </nowiki>
 </WRAP>\\ </WRAP>\\
  
  • Last modified: 2024/10/29 10:25
  • by evs