Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revisionBoth sides next revision
toh:meraki:mx60 [2022/09/18 01:03] – update edit version information under flashing section and changing below it section to read "OpenWrt 22.03.0 and above" lleachiitoh:meraki:mx60 [2022/09/18 01:21] – IP 192.168.1.2 is not used in the flashing procedure, references removed lleachii
Line 42: Line 42:
 1. Download the current meraki_mx60-initramfs-kernel.bin from [[https://downloads.openwrt.org/releases/22.03.0/targets/apm821xx/nand/]]. Then put the file into your TFTP server root directory and rename it to buck.bin 1. Download the current meraki_mx60-initramfs-kernel.bin from [[https://downloads.openwrt.org/releases/22.03.0/targets/apm821xx/nand/]]. Then put the file into your TFTP server root directory and rename it to buck.bin
  
-2. Start your TFTP server at 192.168.1.and connect the MX60(W) to the WAN Port (on some MX60(W) devices, this may be 192.168.1.101 instead of 192.168.1.2).+2. Start your TFTP server on the local computer (at 192.168.1.101) and connect the MX60(W) to the WAN Port.
  
 3. Power on the MX60(W), and interrupt u-boot (accessible on the serial console). At the prompt, enter the following commands to update your boot settings: 3. Power on the MX60(W), and interrupt u-boot (accessible on the serial console). At the prompt, enter the following commands to update your boot settings:
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1