Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revisionBoth sides next revision | ||
| toh:meraki:mx60 [2022/09/18 00:58] – correct Flow Control parameter on serial lleachii | toh:meraki:mx60 [2022/09/18 01:21] – IP 192.168.1.2 is not used in the flashing procedure, references removed lleachii | ||
|---|---|---|---|
| Line 36: | Line 36: | ||
| ==== Flashing ==== | ==== Flashing ==== | ||
| - | Note that older builds (17.01, 18.06.1) have a different flashing method due to changes made in the image. Please ensure you are following the correct instructions for the build you are installing. Instructions for the previous version can be found in the Repo Readme at [[https:// | + | Note that older builds (e.g. 17.01, 18.06 and 21.02) have a different flashing method due to changes made in the image. Please ensure you are following the correct instructions for the build you are installing. Instructions for the previous version can be found in the Repo Readme at [[https:// |
| - | === Version | + | === OpenWrt |
| 1. Download the current meraki_mx60-initramfs-kernel.bin from [[https:// | 1. Download the current meraki_mx60-initramfs-kernel.bin from [[https:// | ||
| - | 2. Start your TFTP server at 192.168.1.2 and connect the MX60(W) to the WAN Port (on some MX60(W) devices, this may be 192.168.1.101 instead of 192.168.1.2). | + | 2. Start your TFTP server |
| 3. Power on the MX60(W), and interrupt u-boot (accessible on the serial console). At the prompt, enter the following commands to update your boot settings: | 3. Power on the MX60(W), and interrupt u-boot (accessible on the serial console). At the prompt, enter the following commands to update your boot settings: | ||