Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:meraki:mx60 [2022/09/18 00:43] – add (W) to no note in flashinf point No. 2 lleachiitoh:meraki:mx60 [2022/09/18 01:21] – IP 192.168.1.2 is not used in the flashing procedure, references removed lleachii
Line 30: Line 30:
 ==== Prerequisites ==== ==== Prerequisites ====
   * 1x Meraki MX60/MX60W   * 1x Meraki MX60/MX60W
-  * 1x UART adapter wired to the MX60/MX60W (speed is 115200).+  * 1x UART adapter wired to the MX60/MX60W (speed is 115200 baud and Hardware Flow Control off).
   * Local computer (Static IP of 192.168.1.101) directly wired to the WAN port.   * Local computer (Static IP of 192.168.1.101) directly wired to the WAN port.
   * A local TFTP server.   * A local TFTP server.
Line 36: Line 36:
 ==== Flashing ==== ==== Flashing ====
  
-Note that older builds (17.01, 18.06.1) have a different flashing method due to changes made in the image. Please ensure you are following the correct instructions for the build you are installing. Instructions for the previous version can be found in the Repo Readme at [[https://github.com/riptidewave93/LEDE-MX60/blob/master/README.md#flashing]]+Note that older builds (e.g. 17.01, 18.06 and 21.02) have a different flashing method due to changes made in the image. Please ensure you are following the correct instructions for the build you are installing. Instructions for the previous version can be found in the Repo Readme at [[https://github.com/riptidewave93/LEDE-MX60/blob/master/README.md#flashing]]
  
-=== Version 22.03.0 and above ===+=== OpenWrt 22.03.0 and above ===
  
 1. Download the current meraki_mx60-initramfs-kernel.bin from [[https://downloads.openwrt.org/releases/22.03.0/targets/apm821xx/nand/]]. Then put the file into your TFTP server root directory and rename it to buck.bin 1. Download the current meraki_mx60-initramfs-kernel.bin from [[https://downloads.openwrt.org/releases/22.03.0/targets/apm821xx/nand/]]. Then put the file into your TFTP server root directory and rename it to buck.bin
  
-2. Start your TFTP server at 192.168.1.and connect the MX60(W) to the WAN Port (on some MX60(W) devices, this may be 192.168.1.101 instead of 192.168.1.2).+2. Start your TFTP server on the local computer (at 192.168.1.101) and connect the MX60(W) to the WAN Port.
  
 3. Power on the MX60(W), and interrupt u-boot (accessible on the serial console). At the prompt, enter the following commands to update your boot settings: 3. Power on the MX60(W), and interrupt u-boot (accessible on the serial console). At the prompt, enter the following commands to update your boot settings:
  • Last modified: 2024/02/12 08:58
  • by 127.0.0.1