Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revisionBoth sides next revision | ||
| toh:meraki:mx60 [2022/09/18 00:32] – add saveenv command to the U-boot revert lleachii | toh:meraki:mx60 [2022/09/18 01:21] – IP 192.168.1.2 is not used in the flashing procedure, references removed lleachii | ||
|---|---|---|---|
| Line 30: | Line 30: | ||
| ==== Prerequisites ==== | ==== Prerequisites ==== | ||
| * 1x Meraki MX60/MX60W | * 1x Meraki MX60/MX60W | ||
| - | * 1x UART adapter wired to the MX60/MX60W (speed is 115200). | + | * 1x UART adapter wired to the MX60/MX60W (speed is 115200 |
| * Local computer (Static IP of 192.168.1.101) directly wired to the WAN port. | * Local computer (Static IP of 192.168.1.101) directly wired to the WAN port. | ||
| * A local TFTP server. | * A local TFTP server. | ||
| Line 36: | Line 36: | ||
| ==== Flashing ==== | ==== Flashing ==== | ||
| - | Note that older builds (17.01, 18.06.1) have a different flashing method due to changes made in the image. Please ensure you are following the correct instructions for the build you are installing. Instructions for the previous version can be found in the Repo Readme at [[https:// | + | Note that older builds (e.g. 17.01, 18.06 and 21.02) have a different flashing method due to changes made in the image. Please ensure you are following the correct instructions for the build you are installing. Instructions for the previous version can be found in the Repo Readme at [[https:// |
| - | === Version | + | === OpenWrt |
| 1. Download the current meraki_mx60-initramfs-kernel.bin from [[https:// | 1. Download the current meraki_mx60-initramfs-kernel.bin from [[https:// | ||
| - | 2. Start your TFTP server at 192.168.1.2 and connect the MX60(W) to the WAN Port (on some MX60 devices, this may be 192.168.1.101 instead of 192.168.1.2). | + | 2. Start your TFTP server |
| 3. Power on the MX60(W), and interrupt u-boot (accessible on the serial console). At the prompt, enter the following commands to update your boot settings: | 3. Power on the MX60(W), and interrupt u-boot (accessible on the serial console). At the prompt, enter the following commands to update your boot settings: | ||