Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
toh:mellanox:spectrum_sn2000_series [2023/11/30 18:29] – Created from the form at meta:create_new_device_page tk154toh:mellanox:spectrum_sn2000_series [2024/10/29 20:46] (current) – Delete device page because it was moved tk154
Line 1: Line 1:
-====== Mellanox Spectrum SN2000 Series ====== 
  
-/* This template is intended to be used via https://openwrt.org/meta/create_new_device_page ONLY.  */ 
-/* DO NOT CREATE NEW DEVICEPAGES VIA COPY & PASTE! */ 
-/* USE https://openwrt.org/meta/create_new_device_page */ 
- 
-{{page>meta:infobox:construction&noheader&nofooter&noeditbtn}} 
- 
-//Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.// 
- 
-<WRAP BOX> 
-FIXME Any text with a light background (like this one) provides instructions for creating the Details Page. When you have filled in correct/useful information (instead of any template that's there) **remove the instructions, as well as the ''<nowiki><WRAP></nowiki>'' that encloses it.** 
-</WRAP> 
- 
-/*****/ 
-/* How to add images ========> http://openwrt.org/meta/adding_images_to_openwrt_wiki */ 
-/*****/ 
- 
-{{media:example:genericrouter1.png?200|Generic Router}} 
- 
-<WRAP BOX> 
-FIXME 
-===== Getting started with a new Device Page ===== 
-  - This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that **you have to fill it with life and information.** 
-  - There are several "fixme" tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness. 
-  - When there are no more "fixme" tags left, delete this one too, along with the ''<nowiki><WRAP></nowiki>'' that encloses it. 
- 
-===== Keep the articles modular ===== 
-  * Please include only model specific information, omit bla,bla and put everything generic into separate articles 
-  * If you have no time to write certain stuff, link to [[docs:start]] 
-  * [[docs:guide-user:base-system:start]] should lead the way, do not explain this again 
-  * DO NOT provide a complete howto here! Instead //groom// the [[docs:start|general documentation]]. 
-</WRAP> 
- 
-===== Supported Versions ===== 
- 
-<WRAP BOX> 
-FIXME 
-  - The tables below are automatically generated, **once the correct filters for Brand and Model are set.** 
-  - If the tables below show information for ''<nowiki>Mellanox Spectrum SN2000 Series </nowiki>'', everything is OK and you can delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-  - If the tables below contain "Nothing found", it means that either 
-    - the dataentry page for Mellanox Spectrum SN2000 Series  is missing. Please [[meta:create_new_dataentry_page|create a new dataentry page]] first, then reload this page. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-    - filters are not set correctly. Most common reason for "Nothing found": The dataentry does not contain a Version, but we are filtering here for version -> Please **edit this section and adjust the filters with the proper Brand, Model and Version.** In case the dataentry does not contain a version, delete the line ''filter  : Versions~''. Just try, it's easy. The tables should then contain $something. If they do, delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-  - If the tables still contain "Nothing found": Don't panic, calm down, take a deep breath and [[:contact|contact a wiki admin]] (tmomas) for help. 
-</WRAP> 
- 
----- datatable ---- 
-cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, Forum Search_search-forums, Device Techdata_pageid 
-headers : Brand, Model, Version, Current Release, OEM Info, Forum Search, Technical Data 
-align   : c,c,c,c,c,c,c 
-filter  : Brand=Mellanox 
-filter  : Model=Spectrum SN2000 Series 
-filter  : Versions~ 
----- 
- 
-/* If no unsupported functions known, comment out the following datatable or delete it. */ 
----- datatable ---- 
-cols    : Unsupported Functions_unsupporteds 
-filter  : Brand=Mellanox 
-filter  : Model=Spectrum SN2000 Series 
-filter  : Versions~ 
----- 
- 
-===== Experimental Versions ===== 
- 
-/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *  
-   The official Table of Hardware only lists current, stable versions of OpenWrt.  * 
-   Use this space to describe any on-going efforts to create a newer version       * 
-   of the firmware for this device. Provide links to firmware images,              * 
-   active threads on the forum, or other sources of information.                   * 
- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ 
- 
-//None at this time.// 
- 
-===== Hardware Highlights ===== 
----- datatable ---- 
-cols    : Model, Versions, CPU, CPU MHz, CPU Cores_numcores, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4GHz, WLAN 5.0GHz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_ 
-header  : Model, Version,SoC,CPU MHz,CPU Cores,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB 
-align   : c,c,c,c,c,c,c,c,c,c,c,c,c 
-filter  : Brand=Mellanox 
-filter  : Model=Spectrum SN2000 Series 
-filter  : Versions~ 
----- 
- 
- 
-===== Installation ===== 
-/* stable release */ 
-/* uncomment once stable release is available 
----- datatable ---- 
-cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url 
-headers : Model, Version, Current Release, Firmware OpenWrt Install, Firmware OpenWrt Upgrade, Firmware OEM Stock 
-align   : c,c,c 
-filter  : Brand=Mellanox 
-filter  : Model=Spectrum SN2000 Series 
-filter  : Versions~ 
----- 
-*/ 
- 
- 
-/* snapshot */ 
-/* delete once stable release is available */ 
----- datatable ---- 
-cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt snapshot Install URL_url, Firmware OpenWrt snapshot Upgrade URL_url, Firmware OEM Stock URL_url 
-headers : Model, Version, Current Release, Firmware OpenWrt snapshot Install, Firmware OpenWrt snapshot Upgrade, Firmware OEM Stock 
-align   : c,c,c 
-filter  : Brand=Mellanox 
-filter  : Model=Spectrum SN2000 Series 
-filter  : Versions~ 
----- 
- 
- 
--> [[docs:guide-user:installation:generic.flashing|Install OpenWrt (generic explanation)]] 
- 
-FIXME Please add the installation procedure here. 
- 
-==== Flash Layout ==== 
-<WRAP BOX> 
-FIXME //[[:docs:techref:flash.layout#discovery_how_to_find_out|Find out flash layout]], then add the flash layout table here (copy, paste, modify the [[docs:techref:flash.layout#partitioning_of_the_flash|example]]).// 
- 
-Please check out the article [[docs:techref:flash.layout|Flash layout]]. It contains examples and explanations that describe how to document the flash layout. 
-</WRAP> 
- 
-==== OEM easy installation ==== 
- 
-<WRAP BOX> 
-FIXME //The instructions below are for Broadcom devices and only serve as an example.//\\ 
-**//Remove / modify them if they do not apply to this particular device!//** 
- 
-This section deals with 
-  * How you install OpenWrt from a device freshly opened 
-  * The steps required such as reset to factory defaults if the device has already been configured 
- 
-**Note:** Reset router to factory defaults if it has been previously configured. 
-  * Browse to ''<nowiki>http://192.168.1.1/Upgrade.asp</nowiki>'' 
-  * Upload .bin file to router 
-  * Wait for it to reboot 
-  * Telnet to 192.168.1.1 and set a root password, or browse to ''<nowiki>http://192.168.1.1</nowiki>'' if LuCI is installed. 
-</WRAP> 
- 
-==== OEM installation using the TFTP method ==== 
- 
-->  [[docs:guide-user:installation:generic.flashing.tftp]] 
- 
-=== Specific values needed for tftp === 
- 
-<WRAP BOX> 
- 
-FIXME Enter values for "FILL-IN" below 
- 
-^ Bootloader tftp server IPv4 address  | FILL-IN   | 
-^ Bootloader MAC address (special)     | FILL-IN   | 
-^ Firmware tftp image                  | [[:downloads|Latest OpenWrt release]] (**''NOTE:''** Name must contain //"tftp"//) | 
-^ TFTP transfer window                 | FILL-IN seconds                                | 
-^ TFTP window start                    | approximately FILL-IN seconds after power on   | 
-^ TFTP client required IP address      | FILL-IN                                        | 
- 
-</WRAP> 
- 
-===== Upgrading OpenWrt ===== 
-->  [[docs:guide-user:installation:generic.sysupgrade]] 
- 
-<WRAP BOX> 
- 
-FIXME These are generic instructions. Update with your router's specifics. 
- 
-==== LuCI Web Upgrade Process ==== 
- 
-  * Browse to ''<nowiki>http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/</nowiki>'' LuCI Upgrade URL 
-  * Upload image file for sysupgrade to LuCI 
-  * Wait for reboot 
- 
-==== Terminal Upgrade Process ==== 
- 
-If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line. 
-There are two command line methods for upgrading: 
- 
-  * ''sysupgrade'' 
-  * ''mtd'' 
- 
-Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing. 
- 
-=== sysupgrade === 
- 
-  * Login as root via SSH on 192.168.1.1, then enter the following commands: 
- 
-<code> 
-cd /tmp 
-wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc 
-sysupgrade /tmp/xxx.abc 
-</code> 
- 
-=== mtd === 
- 
-If ''sysupgrade'' does not support this router, use ''mtd''. 
- 
-  * Login as root via SSH on 192.168.1.1, then enter the following commands: 
- 
-<code> 
-cd /tmp 
-wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc 
-mtd write /tmp/xxx.abc linux && reboot 
-</code> 
- 
-</WRAP> 
- 
-===== Debricking ===== 
--> [[docs:guide-user:troubleshooting:generic.debrick]] 
- 
-===== Failsafe mode ===== 
--> [[docs:guide-user:troubleshooting:failsafe_and_factory_reset]] 
- 
-===== Basic configuration ===== 
--> [[docs:guide-user:base-system:start|Basic configuration]] After flashing, proceed with this.\\ 
-Set up your Internet connection, configure wireless, configure USB port, etc. 
- 
-===== Specific Configuration ===== 
- 
-<WRAP BOX> 
-FIXME Please fill in real values for this device, then remove the EXAMPLEs 
- 
-==== Network interfaces ==== 
-The default network configuration is: 
-^ Interface Name   ^ Description                  ^ Default configuration    ^ 
-| br-lan           | EXAMPLE LAN & WiFi           | EXAMPLE 192.168.1.1/24   | 
-| vlan0 (eth0.0)   | EXAMPLE LAN ports (1 to 4)   | EXAMPLE None             | 
-| vlan1 (eth0.1)   | EXAMPLE WAN port             | EXAMPLE DHCP             | 
-| wl0              | EXAMPLE WiFi                 | EXAMPLE Disabled         | 
- 
-</WRAP> 
- 
-==== Switch Ports (for VLANs) ==== 
-<WRAP BOX> 
-FIXME Please fill in real values for this device, then remove the EXAMPLEs 
- 
-Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on. 
-^ Port             ^ Switch port   ^ 
-| Internet (WAN)   | EXAMPLE 4     | 
-| LAN 1            | EXAMPLE 3     | 
-| LAN 2            | EXAMPLE 2     | 
-| LAN 3            | EXAMPLE 1     | 
-| LAN 4            | EXAMPLE 0     | 
- 
-</WRAP> 
- 
-==== Buttons ==== 
--> [[docs:guide-user:hardware:hardware.button]] on howto use and configure the hardware button(s). 
-Here, we merely name the buttons, so we can use them in the above Howto. 
- 
-<WRAP BOX> 
-FIXME Please fill in real values for this device, then remove the EXAMPLEs 
- 
-The Mellanox Spectrum SN2000 Series has the following buttons: 
- 
-^ BUTTON                       ^ Event   ^ 
-| EXAMPLE Reset                |  reset  | 
-| EXAMPLE Secure Easy Setup    |   ses   | 
-| EXAMPLE No buttons at all.      -    | 
- 
-</WRAP> 
- 
-===== Hardware ===== 
-==== Info ==== 
-<WRAP BOX> 
-FIXME 
-  - This table is automatically generated, **once the correct filters for Brand and Model are set.** 
-  - If you see "Nothing." instead of a table, please **edit this section and adjust the filters with the proper Brand and Model.** Just try, it's easy. 
-  - If you still don't see a table here, or a table filled with '¿': [[toh:start|Is there already a Techdata page available]] for Mellanox Spectrum SN2000 Series ? If not: [[meta:create_new_dataentry_page|Create one]]. 
-  - If you see a table with the desired device data, everything is OK and you can delete this text and the ''<nowiki><WRAP></nowiki>'' that encloses it. 
-  - If it still doesn't work: Don't panic, calm down, take a deep breath and [[:contact|contact a wiki admin]] (tmomas) for help. 
-</WRAP> 
- 
----- datatemplatelist dttpllist ---- 
-template: meta:template_datatemplatelist 
-cols    : Brand, Model, Versions, Device Type, Availability, Supported Since Commit_git, Supported since Rel, Supported current Rel, Unsupported, Bootloader, CPU, Target, CPU MHz, Flash MBs, RAM MB, Switch, Ethernet 100M ports_, Ethernet Gbit ports_, Comments network ports_, Modem, VLAN, WLAN 2.4GHz, WLAN 5.0GHz, WLAN Hardwares, WLAN Comments_, Detachable Antennas_, USB ports_, SATA ports_, Comments USB SATA ports_, Serial, JTAG, LED count, Button count, Power supply, Device Techdata_pageid, Forum topic URL_url, wikidevi URL_url, OEM Device Homepage URL_url, Firmware OEM Stock URL_url, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Comments_ 
-filter  : Brand=Mellanox 
-filter  : Model=Spectrum SN2000 Series 
-filter  : Versions= 
----- 
- 
-==== Photos ==== 
-/* =====>>>>> Standard size for photos: add ?400 to the medialink                                */ 
-/* When uploading photos, **name them** intelligently. Nobody knows what 20100930_000602.jpg is! */ 
-/* e.g. {{:media:yourbrand:yourbrand_yourmodel_front.jpg?400|}}                                  */ 
-/* Thanks, your wiki administration - Oct. 2015 */ 
- 
-//Front://\\ 
-**Insert photo of front of the casing** 
- 
-//Back://\\ 
-**Insert photo of back of the casing** 
- 
-//Backside label://\\ 
-**Insert photo of backside label** 
- 
-==== Opening the case ==== 
- 
-**Note:** This will void your warranty! 
- 
-<WRAP BOX> 
-FIXME //Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, ...// 
-  * To remove the cover and open the device, do a/b/c 
-</WRAP> 
- 
-//Main PCB://\\ 
-**Insert photo of PCB** 
- 
-==== Serial ==== 
--> [[docs:techref:hardware:port.serial]] general information about the serial port, serial port cable, etc. 
- 
-How to connect to the Serial Port of this specific device:\\ 
-**Insert photo of PCB with markings for serial port** 
- 
-<WRAP BOX> 
-FIXME //Replace EXAMPLE by real values.// 
-</WRAP> 
- 
-^ Serial connection parameters\\ for Mellanox Spectrum SN2000 Series @@Version@@ | EXAMPLE 115200, 8N1, 3.3V | 
- 
-==== JTAG ==== 
--> [[docs:techref:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc. 
- 
-How to connect to the JTAG Port of this specific device:\\ 
-**Insert photo of PCB with markings for JTAG port** 
- 
-===== Bootloader mods ===== 
--> [[docs:techref:bootloader]] 
- 
-===== Hardware mods ===== 
- 
-None so far. 
- 
- 
-===== Bootlogs ===== 
-==== OEM bootlog ==== 
-<WRAP bootlog> 
-<nowiki>COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE</nowiki> 
-</WRAP>\\ 
- 
-==== OpenWrt bootlog ==== 
-<WRAP bootlog> 
-<nowiki>COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</nowiki> 
-</WRAP>\\ 
- 
-===== Notes ===== 
-//Space for additional notes, links to forum threads or other resources.// 
- 
-  * ... 
- 
-===== Tags ===== 
-<WRAP BOX> 
-FIXME //Add tags below, then remove this fixme.// 
-</WRAP> 
- 
-[[meta:tags|How to add tags]] 
-{{tag>EXAMPLETAG}} 
  • Last modified: 2023/11/30 18:29
  • by tk154