Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
toh:linksys:mx4200_v1_and_v2 [2024/01/07 14:22] – [OEM bootlog] spectredevtoh:linksys:mx4200_v1_and_v2 [2024/02/11 23:34] – old revision restored (2024/02/11 21:46) jow
Line 4: Line 4:
 /* DO NOT CREATE NEW DEVICEPAGES VIA COPY & PASTE! */ /* DO NOT CREATE NEW DEVICEPAGES VIA COPY & PASTE! */
 /* USE https://openwrt.org/meta/create_new_device_page */ /* USE https://openwrt.org/meta/create_new_device_page */
- 
-{{page>meta:infobox:construction&noheader&nofooter&noeditbtn}} 
- 
  
 /*****/ /*****/
Line 33: Line 30:
 All 3 have support for OpenWrt. All 3 have support for OpenWrt.
 ===== Supported Versions ===== ===== Supported Versions =====
----- datatable ---- +<!-- ToH{ 
-cols    Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, Forum Search_search-forums, Device Techdata_pageid +  "source""json"
-headers BrandModel, Version, Current Release, OEM Info, Forum Search, Technical Data +  "dom""t"
-align   c,c,c,c,c,c,c +  "paging"false, 
-filter  : Brand=Linksys +  "shownColumns"["brand""model""version""supportedcurrentrel""oemdevicehomepageurl""forumsearch""deviceid"]
-filter  : Model=MX4200 +  "filterColumns"{"brand": "^Linksys$", "model""^MX4200$", "version""^(V1|V2)$"} 
-filter  : Versions~V1 +-->
----- +
----- datatable ---- +
-cols    : BrandModelVersionsSupported Current RelOEM device homepage URL_urlForum Search_search-forums, Device Techdata_pageid +
-headers : Brand, Model, Version, Current Release, OEM InfoForum SearchTechnical Data +
-align   : c,c,c,c,c,c,+
-filter  : Brand=Linksys +
-filter  Model=MX4200 +
-filter  Versions~V2 +
----- +
 ===== Potential Limitations and issue ===== ===== Potential Limitations and issue =====
   * Ath11k memory: The ath11k driver needed for the main wireless radios uses a lot of memory when there are few stations connected and low bandwidth traffic flowing.   * Ath11k memory: The ath11k driver needed for the main wireless radios uses a lot of memory when there are few stations connected and low bandwidth traffic flowing.
Line 56: Line 43:
  
 ===== Hardware Highlights ===== ===== Hardware Highlights =====
----- datatable ---- +<!-- ToH{ 
-cols    Model, Versions, CPU, CPU MHz, CPU Cores_numcores, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4GHz, WLAN 5.0GHz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_ +  "source""json"
-header  : Model, Version,SoC,CPU MHz,CPU Cores,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB +  "dom""t"
-align   c,c,c,c,c,c,c,c,c,c,c,c,c +  "paging"false
-filter  : Brand=Linksys +  "shownColumns"["model""version""cpu""cpumhz""cpucores""flashmb""rammb""wlanhardware""wlan24ghz""wlan50ghz""ethernet100mports""ethernet1gports""modem""usbports"]
-filter  : Model=MX4200 +  "filterColumns"{"brand": "^Linksys$", "model""^MX4200$", "version""^(V1|V2)$"} 
-filter  : Versions~V1 +-->
----- +
- +
----- datatable ---- +
-cols    : Model, Versions, CPU, CPU MHz, CPU Cores_numcores, Flash MB_mbflashs, RAM MB_mbram, WLAN Hardware, WLAN 2.4GHz, WLAN 5.0GHz, Ethernet 100M ports_, Ethernet Gbit ports_, ModemUSB ports_ +
-header  : ModelVersion,SoC,CPU MHz,CPU Cores,Flash MB,RAM MB,WLAN Hardware,WLAN2.4,WLAN5.0,100M ports,Gbit ports,Modem,USB +
-align   : c,c,c,c,c,c,c,c,c,c,c,c,c +
-filter  : Brand=Linksys +
-filter  Model=MX4200 +
-filter  Versions~V2 +
-----+
  
 ===== Installation ===== ===== Installation =====
 /* stable release */ /* stable release */
 /* uncomment once stable release is available /* uncomment once stable release is available
----- datatable ---- +<!-- ToH: { 
-cols    ModelVersionsSupported Current RelFirmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url +  "source""json", 
-headers ModelVersionCurrent ReleaseFirmware OpenWrt InstallFirmware OpenWrt UpgradeFirmware OEM Stock +  "dom": "t", 
-align   : c,c,c +  "paging": false
-filter  : Brand=Linksys +  "shownColumns"["model""version""supportedcurrentrel""firmwareopenwrtinstallurl""firmwareopenwrtupgradeurl""firmwareoemstockurl"]
-filter  Model=MX4200 +  "filterColumns": {"brand""^Linksys$", "model""^MX4200$", "version""^V1$"} 
-filter  Versions~V1 +-->
-----+
 */ */
  
Line 90: Line 66:
 /* snapshot */ /* snapshot */
 /* delete once stable release is available */ /* delete once stable release is available */
----- datatable ---- +<!-- ToH: { 
-cols    ModelVersionsSupported Current RelFirmware OpenWrt snapshot Install URL_url, Firmware OpenWrt snapshot Upgrade URL_url, Firmware OEM Stock URL_url +  "source""json", 
-headers ModelVersionCurrent ReleaseFirmware OpenWrt snapshot InstallFirmware OpenWrt snapshot UpgradeFirmware OEM Stock +  "dom": "t", 
-align   : c,c,c +  "paging": false
-filter  : Brand=Linksys +  "shownColumns"["model""version""supportedcurrentrel""firmwareopenwrtsnapshotinstallurl""firmwareopenwrtsnapshotupgradeurl""firmwareoemstockurl"]
-filter  Model=MX4200 +  "filterColumns": {"brand""^Linksys$", "model""^MX4200$", "version""^V1$"} 
-filter  Versions~V1 +-->
-----+
  
  
Line 208: Line 183:
  
 <WRAP BOX> <WRAP BOX>
-FIXME //The instructions below are for Broadcom devices and only serve as an example.//\\ +None at the current time of writing this (08/01/2024)
-**//Remove / modify them if they do not apply to this particular device!//** +
- +
-This section deals with +
-  * How you install OpenWrt from a device freshly opened +
-  * The steps required such as reset to factory defaults if the device has already been configured +
- +
-**Note:** Reset router to factory defaults if it has been previously configured. +
-  * Browse to ''<nowiki>http://192.168.1.1/Upgrade.asp</nowiki>'' +
-  * Upload .bin file to router +
-  * Wait for it to reboot +
-  * Telnet to 192.168.1.1 and set a root password, or browse to ''<nowiki>http://192.168.1.1</nowiki>'' if LuCI is installed.+
 </WRAP> </WRAP>
  
Line 303: Line 267:
 Set up your Internet connection, configure wireless, configure USB port, etc. Set up your Internet connection, configure wireless, configure USB port, etc.
  
-===== Specific Configuration ===== 
  
-<WRAP BOX> 
-FIXME Please fill in real values for this device, then remove the EXAMPLEs 
  
-==== Network interfaces ==== 
-The default network configuration is: 
-^ Interface Name   ^ Description                  ^ Default configuration    ^ 
-| br-lan           | EXAMPLE LAN & WiFi           | EXAMPLE 192.168.1.1/24   | 
-| vlan0 (eth0.0)   | EXAMPLE LAN ports (1 to 4)   | EXAMPLE None             | 
-| vlan1 (eth0.1)   | EXAMPLE WAN port             | EXAMPLE DHCP             | 
-| wl0              | EXAMPLE WiFi                 | EXAMPLE Disabled         | 
  
-</WRAP> 
- 
-==== Switch Ports (for VLANs) ==== 
-<WRAP BOX> 
-FIXME Please fill in real values for this device, then remove the EXAMPLEs 
- 
-Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on. 
-^ Port             ^ Switch port   ^ 
-| Internet (WAN)   | EXAMPLE 4     | 
-| LAN 1            | EXAMPLE 3     | 
-| LAN 2            | EXAMPLE 2     | 
-| LAN 3            | EXAMPLE 1     | 
-| LAN 4            | EXAMPLE 0     | 
- 
-</WRAP> 
  
 ==== Buttons ==== ==== Buttons ====
Line 371: Line 310:
  
 //Front://\\ //Front://\\
-**Insert photo of front of the casing**+{{media:linksys:mx4200-front.png?500|}}
  
 //Back://\\ //Back://\\
-**Insert photo of back of the casing** +{{media:linksys:mx4200-back.png?500|}}
- +
-//Backside label://\\ +
-**Insert photo of backside label**+
  
 ==== Opening the case ==== ==== Opening the case ====
Line 384: Line 320:
  
 <WRAP BOX> <WRAP BOX>
-FIXME //Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws...// +To Open the case you will need a flat pry too and a Philips screwdriver 
-  * To remove the cover and open the device, do a/b/c+ 
 +First use the pry tool to remove the top grille be very gentle and careful as its quite a soft plastic (As seen in the below image) 
 + 
 +If you have a thin and a long enough flat screwdriver that fits in the holes you can skip this step and move on to the next step 
 + 
 +{{media:linksys:mx4200_grille.jpg?400|Linksys MX4200 Grille}} 
 + 
 + 
 +Once the grille has been remove you'll see 4 screws that you'll need to remove  
 + 
 +{{media:linksys:mx4200-screws.jpg?400|Linksys MX4200 screws}} 
 + 
 +At this point the white casing should just slide off and you'll have access to the PCB 
 </WRAP> </WRAP>
  
 //Main PCB://\\ //Main PCB://\\
-**Insert photo of PCB**+ 
 +MX4200 V1 PCB 
 + 
 +{{media:linksys:mx4200v1-pcb.png?400|Linksys MX4200v1 PCB}} 
 + 
 +MX4200 V2 PCB 
 + 
 +{{media:linksys:mx4200v2-pcb.jpeg?400|Linksys MX4200v2 PCB}}
  
 ==== Serial ==== ==== Serial ====
Line 395: Line 351:
  
 How to connect to the Serial Port of this specific device:\\ How to connect to the Serial Port of this specific device:\\
-**Insert photo of PCB with markings for serial port** 
  
-^ Serial connection parameters\\ for Linksys MX4200 V1 and V2 | 115200, 8N1, 3.3V |+MX4200 v1 Serial Below:
  
-==== JTAG ==== +{{media:linksys:mx4200v1-serial.jpeg?200|}}
--> [[docs:techref:hardware:port.jtag]] general information about the JTAG port, JTAG cable, etc.+
  
-How to connect to the JTAG Port of this specific device:\\ +<a2s> 
-**Insert photo of PCB with markings for JTAG port**+   Top Side Of The PCB 
 +                       __ 
 +                       \/ 
 +  GND  TX      RX 
 +#-------------------------# 
 +| .-. .-. .-. .-. .-. .-. | 
 +| '-' '-' '-' '-' '-' '-'
 +#-------------------------# 
 +             6 
 +</a2s>
  
-===== Bootloader mods ===== +MX4200 v2 Serial Below: 
--> [[docs:techref:bootloader]]+ 
 +{{media:linksys:mx4200v2-serial.jpeg?|200}} 
 + 
 +As depicted on the picture above: 
 +<a2s> 
 +  VCC  TX  RX  GND 
 +#-----------------# 
 +|#---#            | 
 +||.-.|.-. .-. .-. | 
 +||'-'|'-' '-' '-'
 +|#---#            | 
 +#-----------------# 
 +         4 
 +              C10 
 +</a2s> 
 + 
 +^ Serial connection parameters\\ for Linksys MX4200 V1 and V2 | 115200, 8N1, 3.3V |
  
-===== Hardware mods ===== 
  
-None so far. 
  
  
Line 955: Line 932:
 ==== OpenWrt bootlog ==== ==== OpenWrt bootlog ====
 <WRAP bootlog> <WRAP bootlog>
-<nowiki>COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING</nowiki>+<nowiki>[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] 
 +[    0.000000] Linux version 5.15.139 (spectre@ubuntu-android-vm) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r23670-9cf5769636) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Thu Dec 14 20:45:18 2023 
 +[    0.000000] Machine model: Linksys MX4200v1 
 +[    0.000000] Zone ranges: 
 +[    0.000000]   DMA      [mem 0x0000000040000000-0x000000005fffffff] 
 +[    0.000000]   DMA32    empty 
 +[    0.000000]   Normal   empty 
 +[    0.000000] Movable zone start for each node 
 +[    0.000000] Early memory node ranges 
 +[    0.000000]   node   0: [mem 0x0000000040000000-0x0000000040ffffff] 
 +[    0.000000]   node   0: [mem 0x0000000041000000-0x000000004a3fffff] 
 +[    0.000000]   node   0: [mem 0x000000004a400000-0x00000000510fffff] 
 +[    0.000000]   node   0: [mem 0x0000000051100000-0x000000005fffffff] 
 +[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff] 
 +[    0.000000] psci: probing for conduit method from DT. 
 +[    0.000000] psci: PSCIv1.0 detected in firmware. 
 +[    0.000000] psci: Using standard PSCI v0.2 function IDs 
 +[    0.000000] psci: MIGRATE_INFO_TYPE not supported. 
 +[    0.000000] psci: SMC Calling Convention v1.0 
 +[    0.000000] percpu: Embedded 17 pages/cpu s30360 r8192 d31080 u69632 
 +[    0.000000] pcpu-alloc: s30360 r8192 d31080 u69632 alloc=17*4096 
 +[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3  
 +[    0.000000] Detected VIPT I-cache on CPU0 
 +[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129024 
 +[    0.000000] Kernel command line: init=/sbin/init rootfstype=squashfs ubi.mtd=24,2048 ubi.block=0,0 root=/dev/ubiblock0_0 rootwait ro root=/dev/ubiblock0_0 
 +[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) 
 +[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) 
 +[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off 
 +[    0.000000] Memory: 373956K/524288K available (7488K kernel code, 844K rwdata, 2056K rodata, 1216K init, 273K bss, 150332K reserved, 0K cma-reserved) 
 +[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 
 +[    0.000000] rcu: Hierarchical RCU implementation. 
 +[    0.000000] Tracing variant of Tasks RCU enabled. 
 +[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. 
 +[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 
 +[    0.000000] Root IRQ handler: gic_handle_irq 
 +[    0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479] 
 +[    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). 
 +[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns 
 +[    0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns 
 +[    0.000101] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) 
 +[    0.000117] pid_max: default: 32768 minimum: 301 
 +[    0.000571] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) 
 +[    0.000587] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) 
 +[    0.002557] rcu: Hierarchical SRCU implementation. 
 +[    0.003317] smp: Bringing up secondary CPUs ... 
 +[    0.003964] Detected VIPT I-cache on CPU1 
 +[    0.004031] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] 
 +[    0.004656] Detected VIPT I-cache on CPU2 
 +[    0.004698] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] 
 +[    0.005305] Detected VIPT I-cache on CPU3 
 +[    0.005342] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] 
 +[    0.005407] smp: Brought up 1 node, 4 CPUs 
 +[    0.005434] SMP: Total of 4 processors activated. 
 +[    0.005442] CPU features: detected: 32-bit EL0 Support 
 +[    0.005449] CPU features: detected: CRC32 instructions 
 +[    0.005498] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching 
 +[    0.005508] CPU: All CPU(s) started at EL1 
 +[    0.005529] alternatives: patching kernel code 
 +[    0.015647] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 
 +[    0.015683] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) 
 +[    0.015918] pinctrl core: initialized pinctrl subsystem 
 +[    0.017083] NET: Registered PF_NETLINK/PF_ROUTE protocol family 
 +[    0.017635] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations 
 +[    0.017677] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations 
 +[    0.017729] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations 
 +[    0.018095] thermal_sys: Registered thermal governor 'step_wise' 
 +[    0.019671] cpuidle: using governor menu 
 +[    0.019932] ASID allocator initialised with 65536 entries 
 +[    0.047812] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 
 +[    0.056911] SCSI subsystem initialized 
 +[    0.057109] usbcore: registered new interface driver usbfs 
 +[    0.057163] usbcore: registered new interface driver hub 
 +[    0.057213] usbcore: registered new device driver usb 
 +[    0.057628] qcom_scm: convention: smc arm 64 
 +[    0.058977] clocksource: Switched to clocksource arch_sys_counter 
 +[    0.060070] NET: Registered PF_INET protocol family 
 +[    0.060203] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) 
 +[    0.060887] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) 
 +[    0.060913] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) 
 +[    0.060928] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) 
 +[    0.060979] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) 
 +[    0.061059] TCP: Hash tables configured (established 4096 bind 4096) 
 +[    0.061141] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) 
 +[    0.061170] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) 
 +[    0.061355] NET: Registered PF_UNIX/PF_LOCAL protocol family 
 +[    0.061400] PCI: CLS 0 bytes, default 64 
 +[    0.062681] workingset: timestamp_bits=46 max_order=17 bucket_order=0 
 +[    0.067357] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
 +[    0.067377] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +[    0.069541] qcom-qmp-phy 78000.phy: supply vdda-phy not found, using dummy regulator 
 +[    0.069731] qcom-qmp-phy 78000.phy: supply vdda-pll not found, using dummy regulator 
 +[    0.070233] qcom-qmp-phy 78000.phy: Registered Qcom-QMP phy 
 +[    0.071073] qcom-qusb2-phy 79000.phy: supply vdda-pll not found, using dummy regulator 
 +[    0.071191] qcom-qusb2-phy 79000.phy: supply vdda-phy-dpdm not found, using dummy regulator 
 +[    0.071372] qcom-qusb2-phy 79000.phy: Registered Qcom-QUSB2 phy 
 +[    0.074124] bam-dma-engine 704000.dma-controller: num-channels unspecified in dt 
 +[    0.074149] bam-dma-engine 704000.dma-controller: num-ees unspecified in dt 
 +[    0.077841] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled 
 +[    0.078474] msm_serial 78b1000.serial: msm_serial: detected port #1 
 +[    0.078505] msm_serial 78b1000.serial: uartclk = 19200000 
 +[    0.078540] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq = 22, base_baud = 1200000) is a MSM 
 +[    0.078879] msm_serial 78b3000.serial: msm_serial: detected port #0 
 +[    0.078905] msm_serial 78b3000.serial: uartclk = 3686400 
 +[    0.078948] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 23, base_baud = 230400) is a MSM 
 +[    0.079004] msm_serial: console setup on port #0 
 +[    0.723699] printk: console [ttyMSM0] enabled 
 +[    0.728825] msm_serial: driver initialized 
 +[    0.737236] loop: module loaded 
 +[    0.738653] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xac 
 +[    0.739675] nand: Hynix H27S4G8F2EDA-BC 
 +[    0.746248] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 
 +[    0.750202] 29 fixed-partitions partitions found on MTD device qcom_nand.0 
 +[    0.757467] Creating 29 MTD partitions on "qcom_nand.0": 
 +[    0.764415] 0x000000000000-0x000000100000 : "0:sbl1" 
 +[    0.771363] 0x000000100000-0x000000200000 : "0:mibib" 
 +[    0.776177] 0x000000200000-0x000000280000 : "0:bootconfig" 
 +[    0.780732] 0x000000280000-0x000000300000 : "0:bootconfig1" 
 +[    0.786048] 0x000000300000-0x000000600000 : "0:qsee" 
 +[    0.793894] 0x000000600000-0x000000900000 : "0:qsee_1" 
 +[    0.799086] 0x000000900000-0x000000980000 : "0:devcfg" 
 +[    0.801690] 0x000000980000-0x000000a00000 : "0:devcfg_1" 
 +[    0.806748] 0x000000a00000-0x000000a80000 : "0:apdp" 
 +[    0.812361] 0x000000a80000-0x000000b00000 : "0:apdp_1" 
 +[    0.817207] 0x000000b00000-0x000000b80000 : "0:rpm" 
 +[    0.822203] 0x000000b80000-0x000000c00000 : "0:rpm_1" 
 +[    0.826948] 0x000000c00000-0x000000c80000 : "0:cdt" 
 +[    0.832184] 0x000000c80000-0x000000d00000 : "0:cdt_1" 
 +[    0.836827] 0x000000d00000-0x000000d80000 : "0:appsblenv" 
 +[    0.842072] 0x000000d80000-0x000000e80000 : "0:appsbl" 
 +[    0.847875] 0x000000e80000-0x000000f80000 : "0:appsbl_1" 
 +[    0.852996] 0x000000f80000-0x000001000000 : "0:art" 
 +[    0.857929] 0x000001000000-0x000001040000 : "u_env" 
 +[    0.862349] 0x000001040000-0x000001060000 : "s_env" 
 +[    0.867035] 0x000001060000-0x000001080000 : "devinfo" 
 +[    0.871930] 0x000001080000-0x00000a680000 : "kernel" 
 +[    1.019738] 0x000001680000-0x00000a680000 : "rootfs" 
 +[    1.157212] mtd: setting mtd22 (rootfs) as root device 
 +[    1.157568] mtdsplit: no squashfs found in "rootfs" 
 +[    1.161267] 0x00000a680000-0x000013c80000 : "alt_kernel" 
 +[    1.308787] 0x00000ac80000-0x000013c80000 : "alt_rootfs" 
 +[    1.446327] 0x000013c80000-0x000013e80000 : "sysdiag" 
 +[    1.448684] 0x000013e80000-0x000013f00000 : "0:ethphyfw" 
 +[    1.451287] 0x000013f00000-0x00001f700000 : "syscfg" 
 +[    1.631114] 0x00001f700000-0x000020000000 : "0:wififw" 
 +[    1.649243] spmi spmi-0: PMIC arbiter version v2 (0x20010000) 
 +[    1.652233] s1: supplied by regulator-dummy 
 +[    1.654145] s2: supplied by regulator-dummy 
 +[    1.658120] vdd_s3: supplied by regulator-dummy 
 +[    1.662506] vdd_s4: supplied by regulator-dummy 
 +[    1.666960] s5: supplied by regulator-dummy 
 +[    1.671375] l1: supplied by regulator-dummy 
 +[    1.675505] l2: supplied by regulator-dummy 
 +[    1.679672] l3: supplied by regulator-dummy 
 +[    1.683841] l4: supplied by regulator-dummy 
 +[    1.688000] l5: supplied by regulator-dummy 
 +[    1.692172] l6: supplied by regulator-dummy 
 +[    1.696350] l7: supplied by regulator-dummy 
 +[    1.700506] l8: supplied by regulator-dummy 
 +[    1.704662] l9: supplied by regulator-dummy 
 +[    1.708951] l11: supplied by regulator-dummy 
 +[    1.712998] l12: supplied by regulator-dummy 
 +[    1.717514] l13: supplied by regulator-dummy 
 +[    1.736130] i2c_dev: i2c /dev entries driver 
 +[    1.741163] sdhci: Secure Digital Host Controller Interface driver 
 +[    1.741202] sdhci: Copyright(c) Pierre Ossman 
 +[    1.746238] sdhci-pltfm: SDHCI platform and OF driver helper 
 +[    1.753974] remoteproc remoteproc0: releasing cd00000.q6v5_wcss 
 +[    1.758917] NET: Registered PF_INET6 protocol family 
 +[    1.762922] Segment Routing with IPv6 
 +[    1.767266] In-situ OAM (IOAM) with IPv6 
 +[    1.770908] NET: Registered PF_PACKET protocol family 
 +[    1.774829] 8021q: 802.1Q VLAN Support v1.8 
 +[    1.796080] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 
 +[    1.796372] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 
 +[    1.802404] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1 
 +[    1.808805] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 
 +[    1.816480] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable 
 +[    1.823985] cpr3_mem_acc_init: apc: not using memory accelerator regulator 
 +[    1.833121] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      SVS: open-loop= 704000 uV 
 +[    1.840068] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused      NOM: open-loop= 816000 uV 
 +[    1.850049] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused    TURBO: open-loop= 872000 uV 
 +[    1.859858] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused   STURBO: open-loop= 976000 uV 
 +[    1.869719] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      SVS: quot[ 7]= 720, quot_offset[ 7]=   0 
 +[    1.879480] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused      NOM: quot[ 7]= 929, quot_offset[ 7]= 205 
 +[    1.890329] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused    TURBO: quot[ 7]=1022, quot_offset[ 7]=  90 
 +[    1.901267] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused   STURBO: quot[ 7]=1204, quot_offset[ 7]= 180 
 +[    1.912343] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop 
 +[    1.914685] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 19200 KHz, changing to: 1017600 KHz 
 +[    1.930975] remoteproc remoteproc0: cd00000.q6v5_wcss is available 
 +[    1.941081] ubi0: attaching mtd24 
 +[    2.218983] random: crng init done 
 +[    2.772988] ubi0: scanning is finished 
 +[    2.780970] ubi0: attached mtd24 (name "alt_rootfs", size 144 MiB) 
 +[    2.781010] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes 
 +[    2.786050] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 
 +[    2.792930] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 
 +[    2.799768] ubi0: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0 
 +[    2.806534] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 
 +[    2.812790] ubi0: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 1702299909 
 +[    2.819916] ubi0: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 80 
 +[    2.829210] ubi0: background thread "ubi_bgt0d" started, PID 508 
 +[    2.829653] block ubiblock0_0: created from ubi0:0(rootfs) 
 +[    2.844810] UBI error: block: can't add 'rootfs' volume, err=-17 
 +[    2.853593] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. 
 +[    2.854034] Freeing unused kernel memory: 1216K 
 +[    2.909084] Run /sbin/init as init process 
 +[    2.909106]   with arguments: 
 +[    2.909109]     /sbin/init 
 +[    2.909112]   with environment: 
 +[    2.909113]     HOME=/ 
 +[    2.909116]     TERM=linux 
 +[    3.115151] init: Console is alive 
 +[    3.115288] init: - watchdog - 
 +[    4.038596] kmodloader: loading kernel modules from /etc/modules-boot.d/
 +[    4.200206] ssdk_switch_device_num_init[1335]:INFO:ess-switch dts node number: 1 
 +[    4.200339] ssdk_dt_get_switch_node[1124]:INFO:ess-switch DT exist! 
 +[    4.206684] ssdk_dt_parse_access_mode[999]:INFO:switch_access_mode: local bus 
 +[    4.212681] ssdk_dt_parse_access_mode[1012]:INFO:switchreg_base_addr: 0x3a000000 
 +[    4.219968] ssdk_dt_parse_access_mode[1013]:INFO:switchreg_size: 0x1000000 
 +[    4.227426] ssdk_dt_parse_mac_mode[327]:INFO:mac mode = 0x0 
 +[    4.234119] ssdk_dt_parse_mac_mode[333]:INFO:mac mode1 doesn't exit! 
 +[    4.239587] ssdk_dt_parse_mac_mode[342]:INFO:mac mode2 doesn't exit! 
 +[    4.246233] ssdk_dt_parse_uniphy[364]:INFO:ess-uniphy DT exist! 
 +[    4.252734] ssdk_dt_parse_intf_mac[942]:INFO:dp2 MAC d8:ec:5e:72:07:92 
 +[    4.258200] ssdk_dt_parse_intf_mac[942]:INFO:dp3 MAC d8:ec:5e:72:07:92 
 +[    4.264805] ssdk_dt_parse_intf_mac[942]:INFO:dp4 MAC d8:ec:5e:72:07:92 
 +[    4.271313] ssdk_dt_parse_intf_mac[942]:INFO:dp5 MAC d8:ec:5e:72:07:92 
 +[    4.277835] ssdk_plat_init[1692]:INFO:ssdk_plat_init start 
 +[    4.400431] ssdk_gcc_clock_init[1275]:INFO:SSDK gcc clock init successfully! 
 +[    4.402844] malibu_phy_api_ops_init[2846]:INFO:qca probe malibu phy driver succeeded! 
 +[    4.446583] regi_init[3953]:INFO:Initializing HPPE!! 
 +[    4.678976] ssdk_ppe_reset_init[1535]:INFO:ppe reset successfully! 
 +[    4.682460] qca_hppe_portctrl_hw_init[126]:INFO:Hawkeye PPE port initializing</nowiki>
 </WRAP>\\ </WRAP>\\
  
-===== Notes ===== 
-//Space for additional notes, links to forum threads or other resources.// 
  
-  * ... 
  
 ===== Tags ===== ===== Tags =====
-<WRAP BOX> 
-FIXME //Add tags below, then remove this fixme.// 
-</WRAP> 
- 
 [[meta:tags|How to add tags]] [[meta:tags|How to add tags]]
-{{tag>EXAMPLETAG}}+{{tag>ipq807x ipq8174 512nand 512ram 1024ram 4port GigabitEthernet 1USB MU-MIMO wifi6 BT 802.11ax u-boot QCN5024 QCN5054 QCN5054 QCA8075 4core CortexA53 4x4 serial dual_firmware 12v_powered}} 
  • Last modified: 2024/09/08 12:11
  • by frollic