User Tools

Site Tools


toh:linksys:linksys_wrt3200acm

Linksys WRT3200ACM

The WRT3200ACM is part of the wrt_ac_series, with 4 detachable antennas, and a faster dual core processor. It is a dualband, 802.11ac wave 2 (160MHz, no 80+80) capable device.
While only 1 revision of the hardware is listed, silently (around Nov 2017) the flash chip was updated in production causing earlier firmwares to be incompatible with newer devices.

WRT3200ACM

Supported Versions

Hardware Highlights

ModelVersionSoCCPU MHzFlash MBRAM MBWLAN HardwareWLAN2.4WLAN5.0100M portsGbit portsModemUSB
WRT3200ACMv1 (rango)Marvell Armada 385 88F68201866256NAND512Marvell 88W8964b/g/na/n/ac-5-1x 2.0, 1x 3.0

Installation

Dual Firmware Flashing

The WRT AC series of routers uses a dual firmware flash layout. This means that two separate firmware partitions are included on the device and are flashed in an alternating fashion.

If booting from the primary partition, the secondary (or alternate) partition will be flashed on next sysupgrade. The reverse logic is also true. See the Flash Layout section for more details.

A Luci plugin has been developed for managing dual firmware flash devices called luci-app-advanced-reboot.

2016/05/18 13:26 · JW0914

Flash Layout

If booting from primary partition, mtd6 will be named ubi, with mtd8 as ubi if booting from alternate partition

Layer 0 raw flash
256 MiB
Layer 1 mtd0
u-boot
2 MiB
mtd1
u_env
128 KiB
mtd2
s_env
256 KiB
mtd3
devinfo
1920KB
mtd4
sysdiag
256KB
firmware
160 MiB
mtd9
syscfg
86 MiB
mtd10
unused_area
5888 KiB
Layer 2 mtd5
kernel1
80 MiB
mtd7
kernel2
80 MiB
Layer 3 primary
kernel image
6 MiB
mtd6
rootfs1 (ubi)
74 MiB
alternate
kernel image
6 MiB
mtd8
rootfs2 (ubi)
74 MiB

OEM easy installation

OEM install

  1. Login to Linksys WebUI (Default IP: 192.168.1.1; Password: admin)
  2. Connectivity Manual Update

  3. Select factory image [.img]
    1. Once flash completes, router will reboot

  4. If the image selected
    1. Has LuCI pre-installed:
    2. Does not have LuCI pre-installed:
        1. Linux/BSD: SSH client built in
        2. Windows: Download PuTTY
2016/05/18 13:26 · JW0914

Upgrading OpenWrt

Sysupgrade

LuCI

  1. Login to the OpenWrt WebUI (Default IP: 192.168.1.1)

  2. System Backup/Flash Firmware Flash New Firmware Image Choose File
    1. Select Sysupgrade bin file [.bin]

  3. Untick Keep Settings, then select Flash Image

CLI

  1. Login to OpenWrt via SSH (DropBear / OpenSSH)
    1. Linux/BSD: SSH client built in
    2. Windows: Download PuTTY
  2. Download/Upload firmware image to router
    1. Download via SSH Terminal:
      cd /tmp && opkg update && opkg install wget && wget <Image-Link>

      OR

    2. Upload via Client Machine Terminal:
      scp -r -i "C:\OpenWrt.ppk" -2 -scp -P 22 "D:\Path\To\Firmware.img" root@192.168.1.1:/tmp
      1. For PuTTY, change: scp to pscp -scp

      • -scp = force use of SCP protocol
      • -r = copy directories recursively
      • -i = private key file for user authentication
      • -2 = force use of particular SSH protocol version [2]
      • -p = connect to specified port

  3. Flash image
    1. SSH Terminal:
      cd /tmp && sysupgrade -n -v <image-name>
      • -n = do not save configuration over reflash
      • -v = more verbose
2016/05/18 13:26 · JW0914

Return to Stock Firmware

Return to OEM

LuCI

  1. Due to missing/incompatible metadata in OEM images, sysupgrade must be forced via the command line

CLI

  1. Login to OpenWrt via SSH (DropBear / OpenSSH)
    1. Linux/BSD: SSH client built in
    2. Windows: Download PuTTY
  2. Download/Upload firmware image to router
    1. Download via SSH Terminal:
      cd /tmp && opkg update && opkg install wget && wget <Image-Link>

      OR

    2. Upload via Client Machine Terminal:
      scp -r -i "C:\OpenWrt.ppk" -2 -scp -P 22 "D:\Path\To\Firmware.img" root@192.168.1.1:/tmp
      1. For PuTTY, change: scp to pscp -scp

      • -scp = force use of SCP protocol
      • -r = copy directories recursively
      • -i = private key file for user authentication
      • -2 = force use of particular SSH protocol version [2]
      • -p = connect to specified port

  3. Flash image
    1. SSH Terminal:
      cd /tmp && sysupgrade -F -n -v <image-name>
      • -F = force write, required to bypass metadata check
      • -n = do not save configuration over reflash
      • -v = more verbose
2016/05/18 13:26 · JW0914

Debricking

generic.debrick

If the U-Boot bootloader environment becomes corrupted, it can be reset
Reset Bootloader Environment

If the U-Boot bootloader becomes corrupted, it can be recovered
Recover Bootloader

Firmware Recovery

If the firmware has become unresponsive and won't boot, chances are you can recover it easily due to the Dual Firmware partition layout, by switching to the alternate firmware.
For this reason, it is recommended to always keep at least one known good version of the firmware on either partition.

Switch router from primary to alternate partition or vice versa using any of the 4 below methods:

LuCI

  1. Install luci-app-advanced-reboot:
    1. SSH:
      opkg update && opkg install luci-app-advanced-reboot
    2. WebUI:
      1. System Software
        1. Actions Update Lists
        2. Actions Filter
          1. luci-app-advanced-reboot Find Package
        3. Status: Available packages
          1. Install luci-app-advanced-reboot

  2. System Advanced Reboot

Serial

  1. Connect via Serial:
    reboot
  2. At 3 second autoboot interrupt delay, press any key
  3. Boot
    1. Primary Partition
      1. Armada XP
        run linksysnandboot
      2. Armada 385
        run nandboot
    2. Alternate Partition:
      1. Armada XP
        run linksysaltnandboot
      2. Armada 385
        run altnandboot

SSH

  1. Determine current partition:
    /usr/sbin/fw_printenv -n boot_part
  2. Boot
    1. Primary Partition:
      /usr/sbin/fw_setenv boot_part 1 && reboot
    2. Alternate Partition:
      /usr/sbin/fw_setenv boot_part 2 && reboot

Power Switch

  1. Power off router with power switch.

  2. Turn power back on and Power LED will light.
    1. As soon as all LEDs turn off (~2s), power off router with power switch

  3. Turn power back on and Power LED will light.
    1. As soon as all LEDs turn off (~2s), power off router with power switch

  4. Turn power back on and Power LED will light.
    1. As soon as all LEDs turn off (~2s), power off router with power switch

  5. Turn power back on and allow router to fully boot.
    • It should now be booted to the alternate firmware partition (partitions)
2016/05/18 13:26 · JW0914

Failsafe mode

Basic configuration

Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.

Switch Ports (for VLANs)

eth0/eth1: physical PCB connection LAN: physical LAN ports on router WAN: physical Internet port on router

Marvell 88E6352 (WRT3200ACM)

sw.port 0 1 2 3 4 5 6 vlan ID
LAN 4 3 2 1 eth0 1
WAN Internet eth1 2

Buttons

hardware.button on howto use and configure the hardware button(s). Here, we merely name the buttons, so we can use them in the above Howto.

BUTTON Event
Reset reset
WPS wps

Hardware

Info

General
Brand Linksys
Model WRT3200ACM
Versions v1 (rango)
Device Type WiFi Router
Availability Available 2017
Comments - general [Launch Date: 2016.10] OEM Firmware Name: rango.img
OpenWrt Support
Supported Since Commit https://git.lede-project.org/?p=source.git;a=commit;h=3764caa93478e3472df3128b79b6d0f6b0fb999c
Supported Since Release 17.01.0
Supported Current Release 19.07.3
Unsupported
Hardware
Bootloader U-Boot
Target mvebu
System-On-Chip
CPU MHz 1866
Flash MB 256NAND
RAM MB 512
Network
Ethernet 100M ports -
Ethernet Gbit ports 5
Switch Marvell 88E6352
Modem -
VLAN Yes
Comments - network ports
Wireless
WLAN 2.4GHz b/g/n
WLAN 5.0GHz a/n/ac
WLAN Hardware Marvell 88W8964
Detachable Antennas 4
Comments - WLAN
Interfaces
USB ports 1x 2.0, 1x 3.0
SATA ports 1
Serial Yes
JTAG Yes
Comments - USB & SATA ports eSATA <-> USB2
Misc
LED count 12
Button count 2
Power supply 12 VDC, 3.0 A
Links
Forum Topic URL
WikiDevi URL https://wikidevi.wi-cat.ru/Linksys_WRT3200ACM
OEM device homepage URL https://www.linksys.com/us/p/P-WRT3200ACM/
Firmware OEM Stock URL https://www.linksys.com/us/support-article?articleNum=207552
Firmware OpenWrt Install URL http://downloads.openwrt.org/releases/19.07.3/targets/mvebu/cortexa9/openwrt-19.07.3-mvebu-cortexa9-linksys_wrt3200acm-squashfs-factory.img
Firmware OpenWrt Upgrade URL http://downloads.openwrt.org/releases/19.07.3/targets/mvebu/cortexa9/openwrt-19.07.3-mvebu-cortexa9-linksys_wrt3200acm-squashfs-sysupgrade.bin
Edit the underlying data View/Edit data

Photos

FIXME

Front:
Insert photo of front of the casing

Back:
Insert photo of back of the casing

Backside label:
Insert photo of backside label

Opening the case

Note: This will void your warranty!

  1. Remove front foot screws
  2. Pull front blue cover straight forward slowly, but firmly
  3. Remove rear foot screws
  4. Gently pry up rear, black top cover using plastic spudgers/opening tool
    1. There are two plastic guides, one per side, which slide into the rear feet

Main PCB:

Serial

port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:

Serial connection parameters 115200, 8N1

Serial Port

Synopsis

Serial Port is labeled J1 on the board, utilizing a JST PH 6 pin connector with a 2.0mm pitch, operating at 3.3v

  • The more common 2.54mm pitch will not fit properly.
    • In a pinch, removing the plastic casing from 2.54mm female connectors allows for a stable enough connection.
      • Ensure leads are insulated with electrical tape
  • If flashing regularly, you may wish to invest in a USB-TTL AJ cable
    • USB-TTL AJ cables require installation of a 3.5mm Jack (F) on the router
Serial Header
Pin Out
Pins 1 2 3 4 5 6
Function Gnd Tx n/a Rx n/a n/a
2016/05/18 13:26 · JW0914

Marvell Wifi

This device uses the Marvell Wifi mwlwifi driver. You can read more about it here: Marvell Wifi

Third radio (radio2)

Bootloader mods

Hardware mods

Bootlogs

OEM bootlog

BootROM - 1.73 Booting from NAND flash General initialization - Version: 1.0.0 AVS selection from EFUSE disabled (Skip reading EFUSE values) mvSysEnvIsFlavourReduced: TWSI Read of 'flavor' failed Detected Device ID 6820 High speed PHY - Version: 2.0 Init RD NAS topology Serdes Lane 3 is USB3 Serdes Lane 4 is SGMII board SerDes lanes topology details: | Lane # | Speed| Type | ------------------------------| | 0 | 6 | SATA0 | | 1 | 5 | PCIe0 | | 2 | 6 | SATA1 | | 3 | 5 | USB3 HOST1 | | 4 | 5 | PCIe1 | | 5 | 0 | SGMII2 | ------------------------------- :** Link is Gen1, check the EP capability PCIe, Idx 0: Link upgraded to Gen2 based on client cpabilities :** Link is Gen1, check the EP capability PCIe, Idx 1: remains Gen1 High speed PHY - Ended Successfully DDR3 Training Sequence - Ver TIP-1.46.0 mvSysEnvGetTopologyUpdateInfo: TWSI Read failed DDR3 Training Sequence - Switching XBAR Window to FastPath Window DDR3 Training Sequence - Ended Successfully Not detected suspend to RAM indication BootROM: Image checksum verification PASSED U-Boot 2013.01 (Sep 25 2017 - 11:42:52) Marvell version: 2015_T1.QA.0p16 Boot version : v1.0.0 Board: RD-NAS-88F6820-DDR3 SoC: MV88F6820 Rev A0 running 2 CPUs CPU: ARM Cortex A9 MPCore (Rev 1) LE CPU 0 CPU @ 1866 [MHz] L2 @ 933 [MHz] TClock @ 200 [MHz] DDR3 @ 933 [MHz] DDR3 32 Bit Width,FastPath Memory Access, DLB Enabled, ECC Disabled DRAM: 512 MiB NAND: 256 MiB MMC: mv_sdh: 0 #### auto_recovery #### [u_env] get auto_recovery == yes [u_env] get auto_recovery == yes [u_env] get boot_part == 1 [u_env] get boot_part_ready == 3 auto_recovery enabled:1, boot_part:1, boot_part_ready:3 [boot_count_read] block:0x220000, size:128KB, records:64 [boot_count_read_record] boot_count:0, next_record:24 [boot_count_write] erase:0, auto_recovery->block_offset:0x220000 offset=0x22C000 Updating boot_count ... [boot_count_write] offset:0x22C000 , length:2048 done PCI-e 0 (IF 0 - bus 0) Root Complex Interface, Detected Link X1, GEN 2.0 PCI-e 1 (IF 1 - bus 1) Root Complex Interface, Detected Link X1, GEN 1.1 USB2.0 0: Host Mode USB3.0 1: Host Mode USB3.0 0: Host Mode Map: Code: 0x1feab000:0x1ff75c30 BSS: 0x1ffef564 Stack: 0x1f9aaf20 Heap: 0x1f9ab000:0x1feab000 U-Boot Environment: 0x00200000:0x00220000 (NAND) Board configuration detected: mvEthE6171SwitchBasicInit init Net: | port | Interface | PHY address | |--------|-----------|--------------| | egiga0 | RGMII | 0x01 | | egiga1 | SGMII | 0x00 | | egiga2 | SGMII | In-Band | egiga0 [PRIME], egiga1, egiga2 auto_recovery_check changes bootcmd: run nandboot Hit any key to stop autoboot: 0 NAND read: device 0 offset 0xa00000, size 0x600000 6291456 bytes read: OK ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linksys WRT3200 Router Created: 2018-01-11 5:42:22 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4640515 Bytes = 4.4 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.10.70 (root@build-vm) (gcc version 4.6.4 (Linaro GCC branch-4.6.4. Marvell GCC Dev 201310-2126.3d181f66 64K MAXPAGESIZE ALIGN) ) #1 SMP Wed Jan 10 21:42:06 PST 2018 [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Marvell Armada 380/381/382/383/384/385/388 (Device Tree), model: Marvell Armada 385 Development Board [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] PERCPU: Embedded 7 pages/cpu @c1151000 s7488 r8192 d12992 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock6 ro rootdelay=1 rootfstype=jffs2 earlyprintk mtdparts=armada-nand:2048K(uboot)ro,128K(u_env),256K(s_env),256K@8064K(devinfo),1920K@8320K(sysdiag),80m@10m(kernel),74m@16m(rootfs),80m@90m(alt_kernel),74m@96m(alt_rootfs),160m@10m(ubifs),-@170m(syscfg) [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] allocated 1048576 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 512MB = 512MB total [ 0.000000] Memory: 508768k/508768k available, 15520k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xfff00000 ( 503 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08417c8 (8422 kB) [ 0.000000] .init : 0xc0842000 - 0xc0883d40 ( 264 kB) [ 0.000000] .data : 0xc0884000 - 0xc08d82a0 ( 337 kB) [ 0.000000] .bss : 0xc08d82a0 - 0xc099f14c ( 796 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] [ 0.000000] LSP version: linux-3.10.70-2015_T1.1p7 [ 0.000000] [ 0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798ms [ 0.000000] L310 cache controller enabled [ 0.000000] l2x0: 16 ways, CACHE_ID 0x410054c9, AUX_CTRL 0x16070000, Cache size: 1048576 B [ 0.000000] Console: colour dummy device 80x30 [ 0.017251] Calibrating delay loop... 3726.54 BogoMIPS (lpj=18632704) [ 0.082983] pid_max: default: 32768 minimum: 301 [ 0.087708] Mount-cache hash table entries: 512 [ 0.092537] Initializing cgroup subsys memory [ 0.096974] CPU: Testing write buffer coherency: ok [ 0.102004] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.107718] Calibrating local timer... 933.34MHz. [ 0.171171] Setting up static identity map for 0xc0642ff8 - 0xc0643050 [ 0.177859] mvebu-pmsu: Initializing Power Management Service Unit [ 0.184119] Initializing CPU Reset module [ 0.188630] CPU1: Booted secondary processor [ 0.241174] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.241226] Brought up 2 CPUs [ 0.254307] SMP: Total of 2 processors activated (7453.08 BogoMIPS). [ 0.260711] CPU: All CPU(s) started in SVC mode. [ 0.265585] devtmpfs: initialized [ 0.270703] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4 [ 0.276029] xor: measuring software checksum speed [ 0.371154] arm4regs : 3309.200 MB/sec [ 0.471155] 8regs : 2234.800 MB/sec [ 0.571156] 32regs : 1905.600 MB/sec [ 0.575402] xor: using function: arm4regs (3309.200 MB/sec) [ 0.581030] pinctrl core: initialized pinctrl subsystem [ 0.586482] regulator-dummy: no parameters [ 0.590745] NET: Registered protocol family 16 [ 0.595686] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.604154] irq: Cannot allocate irq_descs @ IRQ195, assuming pre-allocated [ 0.611428] irq: Cannot allocate irq_descs @ IRQ227, assuming pre-allocated [ 0.628282] bio: create slab <bio-0> at 0 [ 0.801253] raid6: int32x1 232 MB/s [ 0.971284] raid6: int32x2 344 MB/s [ 1.141198] raid6: int32x4 437 MB/s [ 1.311278] raid6: int32x8 444 MB/s [ 1.315091] raid6: using algorithm int32x8 (444 MB/s) [ 1.320199] raid6: using intx1 recovery algorithm [ 1.325171] mvebu-pcie pcie-controller.6: PCIe0.0: link up [ 1.330726] mvebu-pcie pcie-controller.6: PCIe1.0: link up [ 1.336352] mvebu-pcie pcie-controller.6: PCI host bridge to bus 0000:00 [ 1.343111] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 1.349430] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff] [ 1.356386] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.362150] PCI: bus0: Fast back to back transfers disabled [ 1.367783] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.375843] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.384127] PCI: bus1: Fast back to back transfers disabled [ 1.390010] PCI: bus2: Fast back to back transfers disabled [ 1.395713] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe02fffff] [ 1.402561] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0400000-0xe06fffff] [ 1.409401] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit pref] [ 1.417204] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0200000-0xe02fffff 64bit pref] [ 1.425003] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.430027] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe02fffff] [ 1.436876] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0400000-0xe05fffff 64bit pref] [ 1.444676] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0600000-0xe06fffff 64bit pref] [ 1.452475] pci 0000:00:02.0: PCI bridge to [bus 02] [ 1.457498] pci 0000:00:02.0: bridge window [mem 0xe0400000-0xe06fffff] [ 1.464345] PCI: enabling device 0000:00:01.0 (0140 -> 0143) [ 1.470064] PCI: enabling device 0000:00:02.0 (0140 -> 0143) [ 1.476108] SCSI subsystem initialized [ 1.480228] usbcore: registered new interface driver usbfs [ 1.485815] usbcore: registered new interface driver hub [ 1.491233] usbcore: registered new device driver usb [ 1.496532] pps_core: LinuxPPS API ver. 1 registered [ 1.501559] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.510758] PTP clock support registered [ 1.515227] Bluetooth: Core ver 2.16 [ 1.518903] NET: Registered protocol family 31 [ 1.523414] Bluetooth: HCI device and connection manager initialized [ 1.529821] Bluetooth: HCI socket layer initialized [ 1.534763] Bluetooth: L2CAP socket layer initialized [ 1.539877] Bluetooth: SCO socket layer initialized [ 1.545027] Switching to clocksource armada_370_xp_clocksource [ 1.550929] cfg80211: Calling CRDA to update world regulatory domain [ 1.561235] NET: Registered protocol family 2 [ 1.565924] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.573056] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 1.579577] TCP: Hash tables configured (established 4096 bind 4096) [ 1.586004] TCP: reno registered [ 1.589300] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.595197] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.601599] NET: Registered protocol family 1 [ 1.606107] RPC: Registered named UNIX socket transport module. [ 1.612093] RPC: Registered udp transport module. [ 1.616856] RPC: Registered tcp transport module. [ 1.621627] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.628986] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.636146] fuse init (API version 7.22) [ 1.640237] msgmni has been set to 993 [ 1.644353] async_tx: api initialized (async) [ 1.648814] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.656264] io scheduler noop registered [ 1.660249] io scheduler deadline registered [ 1.664592] io scheduler cfq registered (default) [ 1.669734] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver [ 1.676885] mv_xor f1060800.xor: Marvell shared XOR driver [ 1.721198] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr pq ) [ 1.751188] mv_xor f1060800.xor: freeing 1 in use descriptors! [ 1.757077] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( intr crc32c ) [ 1.765090] mv_xor f1060900.xor: Marvell shared XOR driver [ 1.811185] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr pq ) [ 1.841190] mv_xor f1060900.xor: freeing 1 in use descriptors! [ 1.847079] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( intr crc32c ) [ 1.878323] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.905535] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 44) is a 16550A [ 1.912688] console [ttyS0] enabled, bootconsole disabled [ 1.912688] console [ttyS0] enabled, bootconsole disabled [ 1.924063] ahci_mv f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 1.932903] ahci_mv f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 1.943216] scsi0 : ahci_mv_platform [ 1.946962] scsi1 : ahci_mv_platform [ 1.950659] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 58 [ 1.958631] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 58 [ 1.967305] armada-nand f10d0000.nand: Initialize HAL based NFC in 8bit mode with DMA Disabled using BCH 4bit ECC [ 1.981682] NAND device: Manufacturer ID: 0xef, Chip ID: 0xda (Unknown NAND 256MiB 3,3V 8-bit), 256MiB, page size: 2048, OOB size: 64 [ 1.993944] Bad block table found at page 131008, version 0x01 [ 2.000178] Bad block table found at page 130944, version 0x01 [ 2.006263] 11 cmdlinepart partitions found on MTD device armada-nand [ 2.012762] Creating 11 MTD partitions on "armada-nand": [ 2.018094] 0x000000000000-0x000000200000 : "uboot" [ 2.023345] 0x000000200000-0x000000220000 : "u_env" [ 2.028534] 0x000000220000-0x000000260000 : "s_env" [ 2.033737] 0x0000007e0000-0x000000820000 : "devinfo" [ 2.039095] 0x000000820000-0x000000a00000 : "sysdiag" [ 2.044479] 0x000000a00000-0x000005a00000 : "kernel" [ 2.049786] 0x000001000000-0x000005a00000 : "rootfs" [ 2.055104] 0x000005a00000-0x00000aa00000 : "alt_kernel" [ 2.060768] 0x000006000000-0x00000aa00000 : "alt_rootfs" [ 2.066434] 0x000000a00000-0x00000aa00000 : "ubifs" [ 2.071737] 0x00000aa00000-0x000010000000 : "syscfg" [ 2.077394] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 2.086088] tun: Universal TUN/TAP device driver, 1.6 [ 2.091168] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 2.097817] SoC: model = 0x6820, revision = 0x4 [ 2.102418] mvPncVirtBase = 0xe0c00000, pncTcamSize = 1024 [ 2.107924] o 3 Giga ports supported [ 2.111689] o SKB recycle supported for SWF (Disabled) [ 2.117020] o NETA acceleration mode 4 [ 2.120958] o BM supported for CPU: 4 BM pools [ 2.125591] o PnC supported (Enabled) [ 2.129439] o RX Queue support: 8 Queues * 2048 Descriptors [ 2.135209] o TX Queue support: 8 Queues * 532 Descriptors [ 2.140888] o GSO supported [ 2.143867] o GRO supported [ 2.146842] o Receive checksum offload supported [ 2.151652] o Transmit checksum offload supported [ 2.156546] o Driver ERROR statistics enabled [ 2.161094] o Driver INFO statistics enabled [ 2.165552] o Driver DEBUG statistics enabled [ 2.170097] [ 2.172478] port #0: is_sgmii=0, is_rgmii=1, phy_addr=0 [ 2.177746] o Loading network interface(s) for port #0: cpu_mask=0x3, tx_csum_limit=9800 [ 2.186065] [ 2.187560] o Port 0 is connected to Linux netdevice [ 2.193477] o eth0, ifindex = 3, GbE port = 0 [ 2.201630] giga p=0: mtu=1500, mac=30:23:03:dc:0f:f0 (hw config) [ 2.207835] [ 2.209410] port #2: is_sgmii=1, is_rgmii=0, phy_addr=1 [ 2.214702] o Loading network interface(s) for port #2: cpu_mask=0x3, tx_csum_limit=2048 [ 2.223017] [ 2.224511] o Port 2 is connected to Linux netdevice [ 2.230421] o eth1, ifindex = 4, GbE port = 2 [ 2.238576] giga p=2: mtu=1500, mac=30:23:03:dc:0f:f0 (hw config) [ 2.244787] [ 2.246553] (error) mv_switch_probe(5780) (rc=-22): read switch fdt file failed [ 2.253908] mv_soho_switch: probe of switch.3 failed with error 1 [ 2.260038] o Loading Switch QuarterDeck driver [ 2.268970] o Device ID : 0x352 [ 2.272824] o No. of Ports : 7 [ 2.276323] o CPU Port : 5 [ 2.282233] o Setting Switch Port #5 connected to GMAC port for 1000 Full with FC [ 2.292286] o Setting Switch Port #6 connected to GMAC port for 1000 Full with FC [ 2.310934] ata2: SATA link down (SStatus 0 SControl 300) [ 2.316375] ata1: SATA link down (SStatus 0 SControl 300) [ 2.327684] Switch driver init: [ 2.330835] o preset mode = Transparent [ 2.335035] o tag mode = No Tag [ 2.344749] port #0 establish switch connection [ 2.344749] [ 2.351434] libphy: orion_mdio_bus: probed [ 2.355693] mdio_bus f1072004.mdio-mi: cannot get PHY at address 0 [ 2.362064] mdio_bus f1072004.mdio-mi: cannot get PHY at address 1 [ 2.368452] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 2.375536] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.381353] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 2.387207] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 2.393200] PPP generic driver version 2.4.2 [ 2.397570] PPP BSD Compression module registered [ 2.402312] PPP Deflate Compression module registered [ 2.407383] NET: Registered protocol family 24 [ 2.411856] PPTP driver version 0.8.5 [ 2.415658] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.422220] ehci-pci: EHCI PCI platform driver [ 2.426730] ehci-orion: EHCI orion driver [ 2.430822] orion-ehci f1058000.usb: EHCI Host Controller [ 2.436266] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1 [ 2.443915] orion-ehci f1058000.usb: irq 50, io mem 0xf1058000 [ 2.460947] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00 [ 2.467116] hub 1-0:1.0: USB hub found [ 2.470883] hub 1-0:1.0: 1 port detected [ 2.475032] xhci-hcd f10f0000.usb3: xHCI Host Controller [ 2.480372] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2 [ 2.487986] xhci-hcd f10f0000.usb3: irq 48, io mem 0xf10f0000 [ 2.493988] hub 2-0:1.0: USB hub found [ 2.497755] hub 2-0:1.0: 1 port detected [ 2.501748] xhci-hcd f10f0000.usb3: xHCI Host Controller [ 2.507084] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3 [ 2.514801] hub 3-0:1.0: USB hub found [ 2.518567] hub 3-0:1.0: 1 port detected [ 2.522576] xhci-hcd f10f8000.usb3: xHCI Host Controller [ 2.527912] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4 [ 2.535520] xhci-hcd f10f8000.usb3: irq 49, io mem 0xf10f8000 [ 2.541496] hub 4-0:1.0: USB hub found [ 2.545262] hub 4-0:1.0: 1 port detected [ 2.549248] xhci-hcd f10f8000.usb3: xHCI Host Controller [ 2.554597] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5 [ 2.562308] hub 5-0:1.0: USB hub found [ 2.566074] hub 5-0:1.0: 1 port detected [ 3.071230] mvebu-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0 [ 3.121015] i2c /dev entries driver [ 3.135167] armada_thermal f10e4078.thermal: Overheat threshold between 92..107 [ 3.142674] md: raid0 personality registered for level 0 [ 3.148006] md: raid1 personality registered for level 1 [ 3.153342] md: raid6 personality registered for level 6 [ 3.158673] md: raid5 personality registered for level 5 [ 3.164026] md: raid4 personality registered for level 4 [ 3.169438] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 3.177948] dm_crypt using the OCF package. [ 3.182152] Bluetooth: Virtual HCI driver ver 1.3 [ 3.186924] Bluetooth: HCI UART driver ver 2.2 [ 3.191452] usbcore: registered new interface driver bcm203x [ 3.197175] usbcore: registered new interface driver bpa10x [ 3.202815] usbcore: registered new interface driver bfusb [ 3.208364] usbcore: registered new interface driver btusb [ 3.213876] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 3.219622] cpuidle: using governor ladder [ 3.223775] sdhci: Secure Digital Host Controller Interface driver [ 3.229979] sdhci: Copyright(c) Pierre Ossman [ 3.234430] mmc0: no vqmmc regulator found [ 3.238541] mmc0: no vmmc regulator found [ 3.280929] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA [ 3.288520] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.319345] mmc0: new high speed SDIO card at address 0001 [ 3.330834] armada-cesa-ocf f109d000.crypto: mv_get_cesa_resources: Total CESA HW channels supported 2 [ 3.340187] armada-cesa-ocf f109d000.crypto: mv_get_cesa_resources: CESA feature: int_coalescing(1) [ 3.349275] armada-cesa-ocf f109d000.crypto: mv_get_cesa_resources threshold 0x2, threshold_time 0xfffff [ 3.358958] mvCesaInit: channels=2, session=640, queue=256 [ 3.372716] armada-cesa-ocf f109d000.crypto: cesa_ocf_probe: CESA driver operate in ocf(0) mode [ 3.381709] cesadev_init(c085f288) [ 3.385354] usbcore: registered new interface driver usbhid [ 3.390960] usbhid: USB HID core driver [ 3.394869] Loading Marvell spi device [ 3.398915] NET: Registered protocol family 26 [ 3.403430] u32 classifier [ 3.406147] Netfilter messages via NETLINK v0.30. [ 3.410872] nfnl_acct: registering with nfnetlink. [ 3.415709] nf_conntrack version 0.5.0 (7949 buckets, 31796 max) [ 3.421810] ctnetlink v0.93: registering with nfnetlink. [ 3.427148] nf_conntrack_rtsp v0.7 loading [ 3.431337] ipip: IPv4 over IPv4 tunneling driver [ 3.436324] gre: GRE over IPv4 demultiplexor driver [ 3.441230] ip_gre: GRE over IPv4 tunneling driver [ 3.446503] nf_nat_rtsp v0.7 loading [ 3.450100] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.455535] arp_tables: (C) 2002 David S. Miller [ 3.460172] TCP: cubic registered [ 3.463530] NET: Registered protocol family 10 [ 3.468388] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.473898] sit: IPv6 over IPv4 tunneling driver [ 3.479049] NET: Registered protocol family 17 [ 3.483551] Bridge firewalling registered [ 3.487578] Ebtables v2.0 registered [ 3.491262] Bluetooth: RFCOMM TTY layer initialized [ 3.496166] Bluetooth: RFCOMM socket layer initialized [ 3.501327] Bluetooth: RFCOMM ver 1.11 [ 3.505090] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.510421] Bluetooth: BNEP filters: protocol multicast [ 3.515670] Bluetooth: BNEP socket layer initialized [ 3.520652] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.526598] Bluetooth: HIDP socket layer initialized [ 3.531594] l2tp_core: L2TP core driver, V2.0 [ 3.535969] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.540777] 8021q: 802.1Q VLAN Support v1.8 [ 3.544997] Key type dns_resolver registered [ 3.549351] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 3.557439] regulator-dummy: disabling [ 3.561693] input: gpio_keys.4 as /devices/soc.0/internal-regs.1/gpio_keys.4/input/input0 [ 3.570126] mvebu-rtc f10a3800.rtc: setting system clock to 1970-01-01 00:00:00 UTC (0) [ 3.578438] Waiting 1sec before mounting root device... [ 4.590937] md: Waiting for all devices to be available before autodetect [ 4.597752] md: If you don't use raid, use raid=noautodetect [ 4.603702] md: Autodetecting RAID arrays. [ 4.607813] md: Scanned 0 and added 0 devices. [ 4.612280] md: autorun ... [ 4.615082] md: ... autorun DONE. [ 4.860770] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02280000: 0x4c2e instead [ 4.870296] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02280004: 0x534b instead [ 4.879817] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02280008: 0x302e instead [ 4.889337] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0228000c: 0x3030 instead [ 4.898858] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02280010: 0x5742 instead [ 4.908378] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02280014: 0x3233 instead [ 4.917898] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02280018: 0x4341 instead [ 4.927417] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0228001c: 0x2020 instead [ 4.936937] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02280020: 0x4136 instead [ 4.946456] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02280024: 0x3545 instead [ 4.955975] jffs2: Further such events for this erase block will not be printed [ 5.410642] VFS: Mounted root (jffs2 filesystem) readonly on device 31:6. [ 5.417504] devtmpfs: mounted [ 5.420573] Freeing unused kernel memory: 260K (c0842000 - c0883000) ********************************************************************************* _ _ __ _ __ _____ __ __ _____ | | | || \ | | / // ____]\ \ / // ____]TM | | | || \ | | / /| (___ \ V /| (____ | | | || |\ \| |\ \ \____ \ \ / \____ \ | |_____ | || | \ | \ \ ____) | | | ____) | |_______||_||_| \__| \_\[____ / |_| [_____/ (c) 2014 Belkin International, Inc. and/or its affiliates. All rights reserved. Booting rango (firmware version 1.0.6.186168) ********************************************************************************* [utopia][init] System Initialization [utopia][init] Creating /proc [utopia][init] Creating /sys [utopia][init] Creating /dev [utopia][init] Creating /tmp [utopia][init] Allocating 100M for /tmp [utopia][init] Prepairing /dev/pts [utopia][init] Setting /tmp and /var permissions [utopia][init] Starting udev.. [ 6.392988] orion_wdt: Initial timeout 171 sec Attempting mount of ubifs syscfg partition UBI device number 0, total 680 LEBs (86343680 bytes, 82.3 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB) [utopia][init] Using persistent syscfg data from /var/config/syscfg [utopia][init] Starting system logging [utopia][init] Starting sysevent subsystem net.netfilter.nf_conntrack_acct = 1 watchdog running [utopia][init] Setting any unset system values to default [utopia][init] no persistence config file (/var/config/pstcfg) found mac_setup.sh, setting up MAC addresses for all interfaces based on 30:23:03:DC:0F:F0 NTP Servers do not need to be updated configuring switch port to router mode checking for interactive script start up... Updating BootCount Page[25]:C800 ... Done attempting to sync sysinfo.cgi auth credentials cpu temp monitor created Thu Oct 11 06:00:00 UTC 2012 wdev0 no private ioctls. wdev1 no private ioctls. wan, sysevent received: wan-start wdev0ap0 no private ioctls. wdev0ap1 no private ioctls. wdev0ap2 no private ioctls. wdev0ap3 no private ioctls. wdev1ap0 no private ioctls. wdev1ap1 no private ioctls. wdev1ap2 no private ioctls. Lighttpd Model Base: WRT3200ACM Generating Rainier lighttpd config Build temporary www configuration directory: wifi, sysevent received: lan-started (Wed Oct 10 23:00:04 PDT 2012) wifi, service_start() TSLIIHauhEfGE Power cycle Ethernet ports. Registering Service myrouter._http._tcp.local port 80 Got a reply for myrouter._http._tcp.local.: Name now registered and active Not ready for JNAP. Sleeping for 15 seconds... wifi, EEPROM powertables support wifi, wdev0 regioncode: wdev0 getregioncode:16 wifi, wdev0 powertable: wdev0 gettxpower:0x00 wifi, wdev1 regioncode: wdev1 getregioncode:16 wifi, wdev1 powertable: wdev1 gettxpower:0x00 /etc/init.d/service_wifi/service_wifi.sh: line 369: can't create /proc/irq/194/smp_affinity: nonexistent directory wifi, wifi_physical_start(wdev0) Interface doesn't accept private ioctl... 11hdfsmode (8BE0): Operation not supported wifi_physical, iwconfig wdev0 commit wifi, wifi_virtual_start(wdev0) wifi, wifi_user_start(wdev0) [utopia] Not setting ppp_clamp_mtu wifi, enable MU beam former on wdev0ap0 wifi, primary AP: wdev0ap0 is up wifi, wifi_guest_start(wdev0) wifi, guest wdev0ap1 is disabled, do not start wifi guest wifi, wifi_physical_start(wdev1) wifi_physical, iwconfig wdev1 commit wifi, wifi_virtual_start(wdev1) wifi, wifi_user_start(wdev1) wifi, enable MU beam former on wdev1ap0 wifi, primary AP: wdev1ap0 is up wifi, wifi_guest_start(wdev1) wifi, guest wdev1ap1 is disabled, do not start wifi guest wifi, setting WiFi Red CE settings wifi, start_hostapd() Configuration file: /tmp/hostapd-wdev1ap0.conf Using interface wdev1ap0 with hwaddr 30:23:03:dc:0f:f1 and ssid "Linksys01008" random: Only 19/20 bytes of strong random data available from /dev/random random: Not enough entropy pool available for secure operations WPA: Not enough entropy in random pool for secure operations - update keys later when the first station connects Configuration file: /tmp/hostapd-wdev0ap0.conf Using interface wdev0ap0 with hwaddr 30:23:03:dc:0f:f2 and ssid "Linksys01008_5GHz" random: Cannot read from /dev/random: Resource temporarily unavailable random: Only 19/20 bytes of strong random data available from /dev/random random: Not enough entropy pool available for secure operations WPA: Not enough entropy in random pool for secure operations - update keys later when the first station connects Restarting nfqrecv service...


OpenWrt bootlog


Community Builds

Community Build details for the WRT AC Series (including this router) can be found here.

Notes

Space for additional notes, links to forum threads or other resources.

  • Some time around November 2017, Linksys silently updated the hardware for the WRT3200ACM, but did not change any version numbers or other identifiable labels. In particular, they changed the flash memory chip, which resulted in older firmwares causing bootloops on these new devices. This has since been fixed.
  • You may find additional/supplementary information at the wrt_ac_series page
  • Tested OpenWrt 19.07.0-rc2, no issues found, very stable

Tags

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
toh/linksys/linksys_wrt3200acm.txt · Last modified: 2020/06/09 13:33 by ynezz