User Tools

Site Tools


toh:linksys:e900

Linksys E900

The switch and LED work fine but the wireless radio does not work (and probably won't ever work unless there is some hero who is willing to port the driver for it) as of Chaos Calmer 15.05. See dmesg output below for more details on the wireless.

Tomato and DD-WRT both fully support the wireless radio of this model, though.

Supported Versions

Hardware Highlights

Installation

Bootlogs

Original kernel boot log

Decompressing...done Start to blink diag led ... CFE version 5.100.138.11 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: 01/08/15 11:53:36 CST (root@Richard-Linux) Copyright (C) 2000-2008 Broadcom Corporation. Initializing Arena Initializing Devices. No DPN This is a Serial Flash Boot partition size = 262144(0x40000) Found an ST compatible serial flash with 128 64KB blocks; total size 8MB Partition information: boot #00 00000000 -> 0003FFFF (262144) trx #01 00040000 -> 0004001B (28) os #02 0004001C -> 007EFFFF (8060900) nvram #03 007F0000 -> 007FFFFF (65536) Partition information: boot #00 00000000 -> 0003FFFF (262144) trx #01 00040000 -> 007EFFFF (8060928) nvram #02 007F0000 -> 007FFFFF (65536) BCM47XX_GMAC_ID et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.11 CPU type 0x19749: 300MHz Total memory: 32768 KBytes CFE mem: 0x80700000 - 0x807AE1F0 (713200) Data: 0x80743460 - 0x80747540 (16608) BSS: 0x80747540 - 0x807481F0 (3248) Heap: 0x807481F0 - 0x807AC1F0 (409600) Stack: 0x807AC1F0 - 0x807AE1F0 (8192) Text: 0x80700000 - 0x80743460 (275552) Boot version: v5.3.7 The boot is CFE mac_init(): Find mac [58:ef:68:55:4f:b9] in location 0 Nothing... ### CLKDIV= 0x8080842, SFlashClkDiv=8 clkdivsf=2 ### ### Change it to 0x2080842 (2) ### CMD: [ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0] Device eth0: hwaddr 58-EF-68-55-4F-B9, ipaddr 192.168.1.1, mask 255.255.255.0 gateway not set, nameserver not set CMD: [go;] Check CRC of image1 Len: 0x746000 (7626752) (0xBC040000) Offset0: 0x1C (28) (0xBC04001C) Offset1: 0x14FE00 (1375744) (0xBC18FE00) Offset2: 0x0 (0) (0xBC040000) Header CRC: 0xA1D8644B Calculate CRC: 0xA1D8644B Image 1 is OK Try to load image 1. Waiting for 3 seconds to upgrade ... CMD: [load -raw -addr=0x807ae1f0 -max=0x1851e10 :] Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null) Loading: _tftpd_open(): retries=0/3 _tftpd_open(): retries=1/3 _tftpd_open(): retries=2/3 ### Start=406614239 E=735671601 Delta=329057362 ### Failed. Could not load :: Timeout occured CMD: [boot -raw -z -addr=0x80001000 -max=0x6ff000 flash0.os:] Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: ...... 3334536 bytes read ### Start=740559649 E=919299828 Delta=178740179 ### Entry at 0x80001000 Closing network. Starting program at 0x80001000 Linux version 2.6.22 (root@Richard-Linux) (gcc version 4.2.3) #7 Thu Jan 8 11:34:44 CST 2015 prom_init:123: memory size is (2000000) by automatily calculating! prom_init:190: mem:2000000, actually, test by seal! CPU revision is: 00019749 Found an ST compatible serial flash with 128 64KB blocks; total size 8MB Determined physical RAM map: memory: 02000000 @ 00000000 (usable) Zone PFN ranges: Normal 0 -> 8192 HighMem 8192 -> 8192 early_node_map[1] active PFN ranges 0: 0 -> 8192 Built 1 zonelists. Total pages: 8192 Kernel command line: root=/dev/mtdblock2 console=ttyS0,115200 init=/sbin/preinit Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, linesize 32 bytes. Synthesized TLB refill handler (20 instructions). Synthesized TLB load handler fastpath (32 instructions). Synthesized TLB store handler fastpath (32 instructions). Synthesized TLB modify handler fastpath (31 instructions). PID hash table entries: 256 (order: 8, 1024 bytes) CPU: BCM53572 rev 1 at 300 MHz Using 150.000 MHz high precision timer. Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 27916k/32768k available (2545k kernel code, 4836k reserved, 506k data, 204k init, 0k highmem) Mount-cache hash table entries: 512 NET: Registered protocol family 16 PCI: no core PCI: no core PCI: Fixing up bus 0 NET: Registered protocol family 2 Time: MIPS clocksource has been installed. IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher fuse init (API version 7.8) io scheduler noop registered (default) HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096 N_HDLC line discipline registered. Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A loop: module loaded PPP generic driver version 2.4.2 NET: Registered protocol family 24 Register DIAG LED in /proc/sys/diag_blink. The DIAG LED GPIO is 6. Register DIAG LED success in /proc/sys/diag_blink. pflash: found no supported devices sflash: squash filesystem with lzma found at block 1599 Creating 4 MTD partitions on "sflash": 0x00000000-0x00040000 : "boot" 0x00040000-0x007f0000 : "linux" 0x0018fe00-0x007f0000 : "rootfs" mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only 0x007f0000-0x00800000 : "nvram" u32 classifier nf_conntrack version 0.5.0 (256 buckets, 2048 max) edward ====to register conntrack protocol helper for esp: nf_conntrack_rtsp v0.6.21 loading nf_nat_rtsp v0.6.21 loading edward =======nf_nat_proto_esp_init ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team NET: Registered protocol family 17 Ebtables v2.0 registered 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 204k freed Warning: unable to open an initial console. Failed to execute /init ctmisc: module license 'unspecified' taints kernel. Register /dev/ctmisc device, major:10 minor:255 cmd=[/sbin/hotplug2 --coldplug & ] /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory [sighandler]: No more events to be processed, quitting. [cleanup]: Waiting for children. [cleanup]: All children terminated. hahaha enter wl_nvram_convert! The boot is CFE Algorithmics/MIPS FPU Emulator v1.5 /dev/: cannot create cmd=[misc -t get_mac -w 3 ] type = [get_mac]ctmisc_ioctl: cmd=0x11, buffer size=404 get_data(): cmdata_init(): base = 0xbc03ee00 d=0x11 count=8 ldata_init(): location = [1], mydatas index = 1 en=18 ctmisc_ioctl: index=1 tallest:=====(ctmisc ioctl done...)===== get_data(): Get MAC count is [1] get_data(): MAC 0: [58:ef:68:55:4f:b9ÿ] get_data name get_mac write_to_nv 3 get_data(): done cmd=[misc -t get_wsc_pin -w 3 ] type = [get_wsc_ctmisc_ioctl: cmd=0x26, buffer size=404 pin] get_data()data_init(): base = 0xbc03f400 : cmd=0x26 countdata_init(): location = [1], mydatas index = 1 =8 len=8 ctmisc_ioctl: index=1 tallest:=====(ctmisc ioctl done...)===== get_data(): Get WSC count is [1] get_data(): WSC 0: [47553569] get_data name get_wsc_pin write_to_nv 3 get_data(): done cmd=[misc -t get_sn -w 3 ] type = [get_sn]ctmisc_ioctl: cmd=0x15, buffer size=404 get_data(): cmdata_init(): base = 0xbc03fe32 d=0x15 count=8 ldata_init(): location = [1], mydatas index = 1 en=20 ctmisc_ioctl: index=1 tallest:=====(ctmisc ioctl done...)===== get_data(): Get SN count is [1] get_data(): SN 0: [12312C6B701019ÿÿÿÿÿÿ] get_data name get_sn write_to_nv 3 get_data(): done cmd=[misc -t get_flash_type -w 1 ] type = [get_flasctmisc_ioctl: cmd=0x17, buffer size=404 h_type] get_flasflash_init: sflash type 0x100 sh_type(): cmd=0sflash_init: sflash type 0x16 x17 count=0 len=Flash Type: SFLASH 8192 kB 0 tallest:=====(ctmisc ioctl done...)===== Get FLASH TYPE is [SFLASH 8192 kB] cmd=[misc -t get_pa0idxval -w 3 ] type = [get_pa0ictmisc_ioctl: cmd=0x28, buffer size=404 dxval] get_datadata_init(): base = 0xbc03efe0 (): cmd=0x28 coudata_init(): location = [0], mydatas index = 0 nt=8 len=24 ctmisc_ioctl: index=0 tallest:=====(ctmisc ioctl done...)===== get_data(): Get PA0IDXVAL count is [0] get_data name get_pa0idxval write_to_nv 3 get_data(): done Using default PA0 value cmd=[misc -t get_pa1idxval -w 3 ] type = [get_pa1ictmisc_ioctl: cmd=0x2a, buffer size=404 dxval] get_datadata_init(): base = 0xbc03ef20 (): cmd=0x2a coudata_init(): location = [0], mydatas index = 0 nt=8 len=24 ctmisc_ioctl: index=0 tallest:=====(ctmisc ioctl done...)===== get_data(): Get PA1IDXVAL count is [0] get_data name get_pa1idxval write_to_nv 3 get_data(): done Using default PA1 value Cannot find lang from /proc/mtd ret = -1 www -> /www mount: No such file or directory cmd=[insmod emf ] cmd=[insmod igs ] cmd=[insmod ctf ] Needed modules: et wl ip6table_mangle ip6table_filter ip6t_rt ip6t_frag ip6t_ipv6header ip6t_REJECT ip6t_LOG ip6t_ipv6range tunnel4 sit tunnel6 ip6_tunnel nf_conntrack_h323.ko nf_nat_h323.ko xt_TCPMSS.ko cmd=[insmod et ] cmd=[insmod wl ] cmd=[insmod ip6table_mangle ] cmd=[insmod ip6table_filter ] cmd=[insmod ip6t_rt ] cmd=[insmod ip6t_frag ] cmd=[insmod ip6t_ipv6header ] cmd=[insmod ip6t_REJECT ] cmd=[insmod ip6t_LOG ] cmd=[insmod ip6t_ipv6range ] cmd=[insmod tunnel4 ] cmd=[insmod sit ] cmd=[insmod tunnel6 ] cmd=[insmod ip6_tunnel ] cmd=[insmod nf_conntrack_h323.ko ] cmd=[insmod nf_nat_h323.ko ] cmd=[insmod xt_TCPMSS.ko ] cmd=[insmod dnshook ] Hit enter to continue...cmd=[misc -t get_country -w 3 ] type = [get_country] get_data(): cmd=0x2c count=30 len=2 get_data(): Get COUNTRY count is [1] get_data(): COUNTRY 0: [EU] get_data name get_country write_to_nv 3 get_data(): done waitpid: No child processes The chipset is BCM5357 for E900 cmd=[killall httpd ] killall: httpd: no process killed killall: check_http.sh: no process killed cmd=[killall wm-httpd ] killall: wm-httpd: no process killed waitpid: No child processes cmd=[et robowr 0x02 0x06 0x001000a0 ] cmd=[resetbutton ] cmd=[vconfig set_name_type VLAN_PLUS_VID_NO_PAD ] cmd=[vconfig add eth0 1 ] cmd=[vconfig set_ingress_map vlan1 0 0 ] waitpid: No child processes cmd=[vconfig set_ingress_map vlan1 1 1 ] waitpid: No child processes cmd=[vconfig set_ingress_map vlan1 2 2 ] waitpid: No child processes cmd=[vconfig set_ingress_map vlan1 3 3 ] waitpid: No child processes cmd=[vconfig set_ingress_map vlan1 4 4 ] waitpid: No child processes cmd=[vconfig set_ingress_map vlan1 5 5 ] waitpid: No child processes cmd=[vconfig set_ingress_map vlan1 6 6 ] waitpid: No child processes cmd=[vconfig set_ingress_map vlan1 7 7 ] waitpid: No child processes cmd=[vconfig add eth0 2 ] cmd=[vconfig set_ingress_map vlan2 0 0 ] waitpid: No child processes cmd=[vconfig set_ingress_map vlan2 1 1 ] waitpid: No child processes cmd=[vconfig set_ingress_map vlan2 2 2 ] waitpid: No child processes cmd=[vconfig set_ingress_map vlan2 3 3 ] waitpid: No child processes cmd=[vconfig set_ingress_map vlan2 4 4 ] waitpid: No child processes cmd=[vconfig set_ingress_map vlan2 5 5 ] waitpid: No child processes cmd=[vconfig set_ingress_map vlan2 6 6 ] waitpid: No child processes cmd=[vconfig set_ingress_map vlan2 7 7 ] waitpid: No child processes cmd=[brctl addbr br0 ] cmd=[brctl setfd br0 0 ] waitpid: No child processes cmd=[brctl stp br0 dis ] waitpid: No child processes cmd=[brctl addif br0 vlan1 ] waitpid: No child processes br0: No child processes cmd=[wlconf vlan1 up ] vlan1: Operation not supported Write wireless mac successfully cmd=[brctl addif br0 eth1 ] waitpid: No child processes br0: No child processes cmd=[wlconf eth1 up ] eth1: Operation not supported eth1: Operation not permitted wlconf: PHYTYPE: 4 eth1: Invalid argument eth1: Invalid argument eth1: Operation not supported eth1: Operation not supported cmd=[brctl addif br0 eth1 ] device eth1 is already a member of a bridge; can't enslave it to bridge br0. waitpid: No child processes Write wireless mac fail : : No such device cmd=[brctl addif br0 eth2 ] interface eth2 does not exist! eth2: No such device cmd=[brctl addif br0 eth3 ] interface eth3 does not exist! eth3: No such device Set 1 to /proc/sys/net/ipv6/conf/br0/forwarding ... lo: File exists Set 66560 to /proc/sys/net/core/rmem_max ... set 2048 to /proc/sys/vm/min_free_kbytes cmd=[tftpd -s /tmp -c -l -P E900 ] cmd=[cron ] The boot is CFE tftp server started tftpd: standalone socket cmd=[httpd ] cmd=[/tmp/wm-httpd -p 52000 -w ] cmd=[touch /tmp/hosts ] waitpid: No child processes cmd=[dnsmasq -R -h -i br0 -c 0 -r /tmp/resolv.conf ] [Dnsmasq], fec00000000000005aef68fffe554fb9 is IFA_F_TENTATIVE, wait for 1 sec. cmd=[route del -net 224.0.0.0 netmask 240.0.0.0 dev br0 ] route: ioctl 0x890c failed: No such process waitpid: No child processes cmd=[route add -net 224.0.0.0 netmask 240.0.0.0 dev br0 ] waitpid: No child processes cmd=[cesmDNS -o /tmp/.mdns_host_info -d -h Linksys01019 -l 192.168.1.1 ] Starting in daemon mode br0 192.168.1.100 86400 write_dhcpd_conf: file=/tmp/dhcpd-br0.conf, ifname=br0, lan_ip=lan_ipaddr lan_mask=lan_netmask cmd=[dhcpd -cf /tmp/dhcpd-br0.conf -lf /tmp/dhcpd.leases -df /tmp/udhcpd.leases -pf /var/run/dhcpd.pid br0 ] [Dnsmasq], fe800000000000005aef68fffe554fb9 is IFA_F_TENTATIVE, wait for 1 sec. Internet Systems Consortium DHCP Server 4.1.1-P1 Copyright 2004-2010 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Wrote 0 leases to leases file. Listening on Socket/br0/192.168.1.0/24 Sending on Socket/br0/192.168.1.0/24 cmd=[upnp -D -W vlan2 ] cmd=[/bin/eapd ] UPnP::upnp_device_attach:br0: attach InternetGatewayDevice.xml ssdp byebye UPnP::upnp_init:UPnP daemon is ready to run cmd=[nas ] cmd=[killall wps_monitor ] killall: wps_monitor: no process killed waitpid: No child processes cmd=[killall wps_ap ] killall: wps_ap: no process killed cmd=[killall wps_enr ] killall: wps_enr: no process killed cmd=[/bin/wps_monitor ] cmd=[/usr/sbin/acsd ] acsd: scan in progress ... [Dnsmasq], socket AF_INET6: fe80::5aef:68ff:fe55:4fb9, Interface-ID: 8 [Dnsmasq], socket AF_INET6: fec0::5aef:68ff:fe55:4fb9, Interface-ID: 8 [Dnsmasq], socket AF_INET: 192.168.1.1 acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: scan in progress ... acsd: selected channel spec: 0x2b0b cmd=[netbios /tmp/samba/lib/netbios.conf ] cmd=[nlinkd ] lltd:echo Linksys01019 > /proc/sys/kernel/hostname LLTD: wireless interface argument is eth1. cmd=[killall -1 radvd ] killall: radvd: no process killed cmd=[/sbin/monitor_cable ] cmd=[/usr/sbin/arp -c ] cmd=[touch /tmp/hosts ] waitpid: No child processes tallest:=====( wan_or_lan=wan )===== start_wan_ipv6: [IPV6] vlan2 dhcp-tunnel cmd=[touch /tmp/hosts ] waitpid: No child processes start_wan_ipv6: [IPV6] 0 Hit enter to continue...dhcpc_main,reason[PREINIT] Hit enter to continue...cmd=[killall igmpxmld ] killall: igmpxmld: no process killed stop_dhcp6c cmd=[/usr/sbin/ip -6 addr flush dev vlan2 scope global ] cmd=[ip6tables -t filter -F ] cmd=[ip6tables -t filter -Z ] waitpid: No child processes cmd=[ip6tables -t mangle -F ] cmd=[ip6tables -t mangle -Z ] Set 0 to /proc/sys/net/ipv6/conf/all/forwarding ... ioctl: No such device cmd=[killall -9 waninfo ] stop_wan_ipv6: done RTNETLINK answers: No such file or directory Set 0 to /proc/sys/net/ctf/wan_mode ... cmd=[killall -9 qos_bw_detect ] killall: qos_bw_detect: no process killed cmd=[killall igmprt ] killall: igmprt: no process killed cmd=[killall pppd ] killall: pppd: no process killed cmd=[killall -9 pppd ] killall: pppd: no process killed cmd=[killall ip-up ] killall: ip-up: no process killed cmd=[killall ip-down ] killall: ip-down: no process killed cmd=[killall -15 pppd ] killall: pppd: no process killed cmd=[killall -9 pppd ] killall: pppd: no process killed cmd=[killall -15 l2tpd ] killall: l2tpd: no process killed cmd=[killall -9 l2tpd ] killall: l2tpd: no process killed cmd=[killall -9 listen ] killall: listen: no process killed stop_dhcpc cmd=[killall bpalogin ] killall: bpalogin: no process killed cmd=[killall -9 bpalogin ] killall: bpalogin: no process killed cmd=[killall -9 pppd ] killall: pppd: no process killed cmd=[killall -9 ntpclient ] killall: ntpclient: no process killed cmd=[killall -9 redial ] killall: redial: no process killed cmd=[killall wan_auto_detect ] killall: wan_auto_detect: no process killed Hit enter to continue... BusyBox v1.7.2 (2015-01-08 11:49:52 CST) built-in shell (msh) Enter 'help' for a list of built-in commands. #


OpenWrt kernel boot log

[ 0.000000] Linux version 4.1.6 (openwrt@gb-10) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r47026) ) #1 Thu Sep 24 03:14:35 UTC 2015 [ 0.000000] CPU0 revision is: 00019749 (MIPS 74Kc) [ 0.000000] bcm47xx: Using bcma bus [ 0.000000] bcma: bus0: Found chip with id 53572, rev 0x01 and package 0x08 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff] [ 0.000000] On node 0 totalpages: 8192 [ 0.000000] free_area_init_node: node 0, pgdat 80384010, node_mem_map 81000000 [ 0.000000] Normal zone: 64 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 8192 pages, LIFO batch:0 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: noinitrd console=ttyS0,115200 [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 28200K/32768K available (2994K kernel code, 125K rwdata, 564K rodata, 208K init, 290K bss, 4568K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] NR_IRQS:128 [ 0.000000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x27, class 0x0) [ 0.000000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1C, class 0x0) [ 0.000000] bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x03, class 0x0) [ 0.000000] bcma: bus0: Core 3 found: MIPS 74K (manuf 0x4A7, id 0x82C, rev 0x05, class 0x0) [ 0.000000] bcma: bus0: Core 4 found: SDR/DDR1 Memory Controller (manuf 0x4BF, id 0x835, rev 0x02, class 0x0) [ 0.000000] bcma: bus0: Found rev 9 PMU (capabilities 0x28982A09) [ 0.000000] bcma: bus0: Found serial flash [ 0.000000] bcma: bus0: Found M25P64 serial flash (size: 8192KiB, blocksize: 0x10000, blocks: 128) [ 0.000000] bcma: bus0: Early bus registered [ 0.000000] MIPS: machine is Linksys E900 V1 [ 0.000000] bcm47xx: Setting up vectored interrupts [ 0.000000] clocksource MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 12741736309 ns [ 0.000020] sched_clock: 32 bits at 150MHz, resolution 6ns, wraps every 14316557820ns [ 0.000434] Calibrating delay loop... 149.91 BogoMIPS (lpj=749568) [ 0.070076] pid_max: default: 32768 minimum: 301 [ 0.070598] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.070640] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.076984] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.078796] NET: Registered protocol family 16 [ 0.108394] Switched to clocksource MIPS [ 0.112271] NET: Registered protocol family 2 [ 0.114762] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.114839] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.114895] TCP: Hash tables configured (established 1024 bind 1024) [ 0.115258] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.115326] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.116036] NET: Registered protocol family 1 [ 0.116231] PCI: CLS 0 bytes, default 32 [ 0.308370] can not parse nvram name sb/1/rxpo2g(null) with value 0xff got -34 [ 0.461827] bcma: bus0: Using SPROM revision 8 provided by platform. [ 0.461874] bcma: bus0: PMU resource config unknown or not needed for device 0xD144 [ 0.463901] bcma: bus0: Workarounds unknown or not needed for device 0xD144 [ 0.463927] bcma: bus0: Initializing MIPS core... [ 0.463966] bcma: bus0: set_irq: core 0x0812, irq 3 => 3 [ 0.463998] bcma: bus0: set_irq: core 0x082d, irq 4 => 4 [ 0.464029] bcma: bus0: set_irq: core 0x0800, irq 2 => 2 [ 0.464050] bcma: bus0: IRQ reconfiguration done [ 0.464072] bcma: core 0x0800, irq : 2(S)* 3 4 5 6 D I [ 0.464142] bcma: core 0x0812, irq : 2(S) 3* 4 5 6 D I [ 0.464203] bcma: core 0x082d, irq : 2(S) 3 4* 5 6 D I [ 0.464264] bcma: core 0x082c, irq : 2(S) 3 4 5 6 D I* [ 0.464326] bcma: core 0x0835, irq : 2(S) 3 4 5 6 D* I [ 0.465936] bcma: bus0: Bus registered [ 0.467928] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.482913] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.482978] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.485596] io scheduler noop registered [ 0.485659] io scheduler deadline registered (default) [ 0.486256] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.492849] console [ttyS0] disabled [ 0.513197] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 2, base_baud = 1250000) is a U6_16550A [ 0.893592] console [ttyS0] enabled [ 0.945247] 6 bcm47xxpart partitions found on MTD device bcm47xxsflash [ 0.951954] Creating 6 MTD partitions on "bcm47xxsflash": [ 0.957464] 0x000000000000-0x000000040000 : "boot" [ 0.964426] 0x000000040000-0x0000007f0000 : "firmware" [ 0.971642] 0x00000004001c-0x00000004090c : "loader" [ 0.978713] 0x00000004090c-0x000000181400 : "linux" [ 0.985675] 0x000000181400-0x0000007f0000 : "rootfs" [ 0.992927] mtd: device 4 (rootfs) set to be root filesystem [ 0.998849] 1 squashfs-split partitions found on MTD device rootfs [ 1.005159] 0x000000350000-0x0000007f0000 : "rootfs_data" [ 1.012772] 0x0000007f0000-0x000000800000 : "nvram" [ 1.021454] bgmac bcma0:2: Found PHY addr: 30 (NOREGS) [ 1.032302] bgmac bcma0:2: Support for Roboswitch not implemented [ 1.061927] libphy: bgmac mii bus: probed [ 1.166079] b53_common: found switch: BCM5325, rev 4 [ 1.172936] bgmac: Broadcom 47xx GBit MAC driver loaded [ 1.179149] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds) [ 1.188252] NET: Registered protocol family 10 [ 1.198017] NET: Registered protocol family 17 [ 1.202830] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.215839] Bridge firewalling registered [ 1.220031] 8021q: 802.1Q VLAN Support v1.8 [ 1.237409] VFS: Mounted root (squashfs filesystem) readonly on device 31:4. [ 1.246570] Freeing unused kernel memory: 208K (8039c000 - 803d0000) [ 3.060858] init: Console is alive [ 3.064834] init: - watchdog - [ 5.105657] init: - preinit - [ 9.450850] jffs2: notice: (230) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 9.469397] mount_root: switching to jffs2 overlay [ 9.543892] procd: - early - [ 9.547115] procd: - watchdog - [ 10.644430] procd: - ubus - [ 11.651724] random: ubusd urandom read with 20 bits of entropy available [ 11.672013] procd: - init - [ 14.372335] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 14.407415] Loading modules backported from Linux version master-2015-07-21-0-g47cd203 [ 14.415584] Backport generated by backports.git backports-20150626-0-gc1a4168 [ 14.430503] ip_tables: (C) 2000-2006 Netfilter Core Team [ 14.459988] nf_conntrack version 0.5.0 (443 buckets, 1772 max) [ 14.553356] xt_time: kernel timezone is -0000 [ 14.617342] cfg80211: World regulatory domain updated: [ 14.622692] cfg80211: DFS Master region: unset [ 14.627124] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 14.637102] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 14.645303] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 14.653491] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 14.661693] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 14.671392] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 14.681084] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 14.689373] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 14.697516] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 14.864344] PPP generic driver version 2.4.2 [ 14.875247] NET: Registered protocol family 24 [ 14.908968] b43-phy0: Broadcom 53572 WLAN found (core revision 28) [ 14.916412] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 17 [ 14.922829] b43-phy0 ERROR: FOUND UNSUPPORTED RADIO (Manuf 0x17F, ID 0x2057, Revision 13, Version 0) [ 14.932250] b43: probe of bcma0:1 failed with error -122 [ 14.937969] Broadcom 43xx driver loaded [ Features: NL ] [ 28.468891] device eth0.1 entered promiscuous mode [ 28.473796] device eth0 entered promiscuous mode [ 28.500972] br-lan: port 1(eth0.1) entered forwarding state [ 28.506763] br-lan: port 1(eth0.1) entered forwarding state [ 30.498522] br-lan: port 1(eth0.1) entered forwarding state [ 77.528465] random: nonblocking pool is initialized


Tags

toh/linksys/e900.txt · Last modified: 2018/04/13 18:53 by tmomas