Linksys E2500 v3

CFE version 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: 07/13/15 05:34:20 EDT (lzh@team2) Copyright (C) 2000-2008 Broadcom Corporation. Init Arena Init Devs. This is a Serial Flash Boot partition size = 262144(0x40000) Found a 16MB ST compatible serial flash et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.127.2901 @VERSION_TYPE@ CPU type 0x19749: 300MHz Tot mem: 65536 KBytes CFE mem: 0x80700000 - 0x807A2670 (665200) Data: 0x80735190 - 0x807391B0 (16416) BSS: 0x807391B0 - 0x8073C670 (13504) Heap: 0x8073C670 - 0x807A0670 (409600) Stack: 0x807A0670 - 0x807A2670 (8192) Text: 0x80700000 - 0x80735184 (217476) Boot version: v6.07 The boot is CFE Nothing... The country is same ### CLKDIV= 0x80e0842, SFlashClkDiv=8 clkdivsf=2 ### ### Change it to 0x20e0842 (2) ### Device eth0: hwaddr 58-EF-68-46-21-BC, ipaddr 192.168.1.1, mask 255.255.255.0 gateway not set, nameserver not set Header CRC: 0x58033199 Calculate CRC: 0x58033199 Image 1 is OK Try to load image 1. Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null) Loading: . 8060928 bytes read Entry at 0x807a2670 Loader:raw Filesys:memory Dev:eth0 File::0x807a2670 Options:(null) Loading: . 0 bytes read Failed. Could not load :0x807a2670: Error CFE>

CFE version 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: 07/13/15 05:34:20 EDT (lzh@team2) Copyright (C) 2000-2008 Broadcom Corporation. Init Arena Init Devs. This is a Serial Flash Boot partition size = 262144(0x40000) Found a 16MB ST compatible serial flash et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.127.2901 @VERSION_TYPE@ CPU type 0x19749: 300MHz Tot mem: 65536 KBytes CFE mem: 0x80700000 - 0x807A2670 (665200) Data: 0x80735190 - 0x807391B0 (16416) BSS: 0x807391B0 - 0x8073C670 (13504) Heap: 0x8073C670 - 0x807A0670 (409600) Stack: 0x807A0670 - 0x807A2670 (8192) Text: 0x80700000 - 0x80735184 (217476) Boot version: v6.07 The boot is CFE Nothing... The country is same ### CLKDIV= 0x20e0842, SFlashClkDiv=2 clkdivsf=2 ### ### Change it to 0x20e0842 (2) ### Device eth0: hwaddr 58-EF-68-46-21-BC, ipaddr 192.168.1.1, mask 255.255.255.0 gateway not set, nameserver not set Header CRC: 0x58033199 Calculate CRC: 0x58033199 Image 1 is OK Try to load image 1. Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null) Loading: Failed. Could not load :: Timeout occured Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: .. 4157888 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000 Linux version 2.6.22 (zls@team2) (gcc version 4.2.3) #80 Fri Sep 14 14:22:56 EDT 2018 CPU revision is: 00019749 Found an ST compatible serial flash with 256 64KB blocks; total size 16MB Determined physical RAM map: memory: 04000000 @ 00000000 (usable) Zone PFN ranges: Normal 0 -> 16384 HighMem 16384 -> 16384 early_node_map[1] active PFN ranges 0: 0 -> 16384 Built 1 zonelists. Total pages: 16384 Kernel command line: root=/dev/mtdblock2 console=ttyS0,115200 init=/sbin/preinit Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, linesize 32 bytes. Synthesized TLB refill handler (20 instructions). Synthesized TLB load handler fastpath (32 instructions). Synthesized TLB store handler fastpath (32 instructions). Synthesized TLB modify handler fastpath (31 instructions). PID hash table entries: 512 (order: 9, 2048 bytes) CPU: BCM5357 rev 2 at 300 MHz Using 150.000 MHz high precision timer. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 59800k/65536k available (3214k kernel code, 5680k reserved, 629k data, 216k init, 0k highmem) Mount-cache hash table entries: 512 NET: Registered protocol family 16 SCSI subsystem initialized usbcore: registered new interface driver usbfs ........ usbcore: registered new interface driver usbfs....... usbcore: registered new interface driver hub ........ usbcore: registered new interface driver hub....... usbcore: registered new device driver usb PCI: no core PCI: no core PCI: Fixing up bus 0 Time: MIPS clocksource has been installed. NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered gpio_init: power pulse time 7 Register DIAG LED in /proc/sys/diag_blink. VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher fuse init (API version 7.8) io scheduler noop registered (default) HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096 N_HDLC line discipline registered. Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A loop: module loaded PPP generic driver version 2.4.2 NET: Registered protocol family 24 pflash: found no supported devices sflash: squash filesystem with lzma found at block 30 Creating 4 MTD partitions on "sflash": 0x00000000-0x00040000 : "boot" 0x00040000-0x00ff0000 : "linux" 0x001eaa54-0x00ff0000 : "rootfs" 0x00ff0000-0x01000000 : "nvram" wombo_reset set to gpio 23 ehci_hcd 0000:00:04.1: EHCI Host Controller ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:04.1: EHCI Fastpath: New EHCI driver starting ehci_hcd 0000:00:04.1: irq 5, io mem 0x18004000 ehci_hcd 0000:00:04.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice usb_set_configuration: has interfaces 1 usb_device_match: usb device level 0, force_usb_mode 0, usb_mode 3 usb_device_match: usb device level 0, force_usb_mode 0, usb_mode 3 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected wombo_reset set to gpio 23 ohci_hcd 0000:00:04.0: OHCI Host Controller ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:04.0: irq 5, io mem 0x18009000 usb usb2: configuration #1 chosen from 1 choice usb_set_configuration: has interfaces 1 usb_device_match: usb device level 0, force_usb_mode 0, usb_mode 3 usb_device_match: usb device level 0, force_usb_mode 0, usb_mode 3 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ehci_hcd 0000:00:04.1: Ehci port 2 had hsic capability USB Universal Host Controller Interface driver v3.0 u32 classifier nf_conntrack version 0.5.0 (512 buckets, 4096 max) edward ====to register conntrack protocol helper for esp: nf_conntrack_rtsp v0.6.21 loading nf_nat_rtsp v0.6.21 loading edward =======nf_nat_proto_esp_init ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver usb 1-2: new high speed USB device using ehci_hcd and address 2 sit0: Disabled Privacy Extensions NET: Registered protocol family 17 Ebtables v2.0 registered 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 216k freed Warning: unable to open an initial console. Failed to execute /init ehci_hcd 0000:00:04.1: Ehci port 2 had hsic capability usb 1-2: configuration #1 chosen from 1 choice usb_set_configuration: has interfaces 1 usb_device_match: usb device level 1, force_usb_mode 0, usb_mode 3 usb_device_match: usb device level 1, force_usb_mode 0, usb_mode 3 cmd=[touch /tmp/var/lib/nfs/xtab ] cmd=[chmod 644 /tmp/var/lib/nfs/xtab ] cmd=[touch /tmp/var/lib/nfs/etab ] cmd=[chmod 644 /tmp/var/lib/nfs/etab ] cmd=[touch /tmp/var/lib/nfs/rmtab ] cmd=[chmod 644 /tmp/var/lib/nfs/rmtab ] cmd=[touch /tmp/var/lib/nfs/state ] cmd=[chmod go-rwx /tmp/var/lib/nfs/state ] cmd=[touch /tmp/disk_updating_lock ] cmd=[chmod 644 /tmp/disk_updating_lock ] cmd=[touch /tmp/file_variable_updating_lock ] cmd=[chmod 644 /tmp/file_variable_updating_lock ] cmd=[/sbin/hotplug2 --coldplug ] /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory /dev/nvram: No such file or directory [sighandler]: No more events to be processed, quitting. [cleanup]: Waiting for children. [cleanup]: All children terminated. cmd=[insmod ctmisc ] ctmisc: no version for "struct_module" found: kernel tainted. ctmisc: module license 'unspecified' taints kernel. Register /dev/ctmisc device, major:10 minor:255 cmd=[insmod ctbootnv ] start=0xbc03b000, end=0xbc040000 sflash_init: type=100 Restoring defaults...The boot is CFE cmd=[misc -t get_sn -w 3 ] Change to "bootnpa2ga1idxval = 8 0xff34 0x131a 0xfb45 v get sn" pa5ga0idxval = 10 0xfe80 0x1369 0xfb16 pa5gha0idxval = 8 0xfe8b 0x1395 0xfb04 mac = 58:EF:68:46:21:BC sn = 10A30C67704027 wsc_pin = 58113073 country = EU 2g_country_code = EU 5g_country_code = EU unused_offset=de cmd=[misc -t get_country -w 3 ] Change to "bootnpa2ga1idxval = 8 0xff34 0x131a 0xfb45 v get country" pa5ga0idxval = 10 0xfe80 0x1369 0xfb16 pa5gha0idxval = 8 0xfe8b 0x1395 0xfb04 mac = 58:EF:68:46:21:BC sn = 10A30C67704027 wsc_pin = 58113073 country = EU 2g_country_code = EU 5g_country_code = EU unused_offset=de 1 nvram_commit(): start 1 nvram_commit(): end done Algorithmics/MIPS FPU Emulator v1.5 /dev/: cannot create cmd=[misc -t get_mac -w 3 ] Change to "bootnpa2ga1idxval = 8 0xff34 0x131a 0xfb45 v get mac" pa5ga0idxval = 10 0xfe80 0x1369 0xfb16 pa5gha0idxval = 8 0xfe8b 0x1395 0xfb04 mac = 58:EF:68:46:21:BC sn = 10A30C67704027 wsc_pin = 58113073 country = EU 2g_country_code = EU 5g_country_code = EU unused_offset=de cmd=[misc -t get_wsc_pin -w 3 ] Change to "bootnpa2ga1idxval = 8 0xff34 0x131a 0xfb45 v get wsc_pin" pa5ga0idxval = 10 0xfe80 0x1369 0xfb16 pa5gha0idxval = 8 0xfe8b 0x1395 0xfb04 mac = 58:EF:68:46:21:BC sn = 10A30C67704027 wsc_pin = 58113073 country = EU 2g_country_code = EU 5g_country_code = EU unused_offset=de cmd=[misc -t get_sn -w 3 ] Change to "bootnpa2ga1idxval = 8 0xff34 0x131a 0xfb45 v get sn" pa5ga0idxval = 10 0xfe80 0x1369 0xfb16 pa5gha0idxval = 8 0xfe8b 0x1395 0xfb04 mac = 58:EF:68:46:21:BC sn = 10A30C67704027 wsc_pin = 58113073 country = EU 2g_country_code = EU 5g_country_code = EU unused_offset=de cmd=[misc -t get_country -w 3 ] Change to "bootnpa2ga1idxval = 8 0xff34 0x131a 0xfb45 v get country" pa5ga0idxval = 10 0xfe80 0x1369 0xfb16 pa5gha0idxval = 8 0xfe8b 0x1395 0xfb04 mac = 58:EF:68:46:21:BC sn = 10A30C67704027 wsc_pin = 58113073 country = EU 2g_country_code = EU 5g_country_code = EU unused_offset=de cmd=[misc -t get_2g_country_code -w 3 ] Change to "bootnpa2ga1idxval = 8 0xff34 0x131a 0xfb45 v get 2g_countrypa5ga0idxval = 10 0xfe80 0x1369 0xfb16 _code" pa5gha0idxval = 8 0xfe8b 0x1395 0xfb04 mac = 58:EF:68:46:21:BC sn = 10A30C67704027 wsc_pin = 58113073 country = EU 2g_country_code = EU 5g_country_code = EU unused_offset=de cmd=[misc -t get_5g_country_code -w 3 ] Change to "bootnpa2ga1idxval = 8 0xff34 0x131a 0xfb45 v get 5g_countrypa5ga0idxval = 10 0xfe80 0x1369 0xfb16 _code" pa5gha0idxval = 8 0xfe8b 0x1395 0xfb04 mac = 58:EF:68:46:21:BC sn = 10A30C67704027 wsc_pin = 58113073 country = EU 2g_country_code = EU 5g_country_code = EU unused_offset=de cmd=[misc -t get_pa2ga0idxval -w 3 ] Change to "bootnpa2ga1idxval = 8 0xff34 0x131a 0xfb45 v get pa2ga0idxvpa5ga0idxval = 10 0xfe80 0x1369 0xfb16 al" pa5gha0idxval = 8 0xfe8b 0x1395 0xfb04 mac = 58:EF:68:46:21:BC sn = 10A30C67704027 wsc_pin = 58113073 country = EU 2g_country_code = EU 5g_country_code = EU unused_offset=de cmd=[misc -t get_pa2ga1idxval -w 3 ] Change to "bootnpa2ga1idxval = 8 0xff34 0x131a 0xfb45 v get pa2ga1idxvpa5ga0idxval = 10 0xfe80 0x1369 0xfb16 al" pa5gha0idxval = 8 0xfe8b 0x1395 0xfb04 mac = 58:EF:68:46:21:BC sn = 10A30C67704027 wsc_pin = 58113073 country = EU 2g_country_code = EU 5g_country_code = EU unused_offset=de Using default 2G PA0 value 2G idx[8] w0a1[0xff34] w1a1[0x131a] w2a1[0xfb45] Update [0xff34] to [0xff34] Update [0x131a] to [0x131a] Update [0xfb45] to [0xfb45] cmd=[misc -t get_pa5gha0idxval -w 3 ] Change to "bootnpa2ga1idxval = 8 0xff34 0x131a 0xfb45 v get pa5gha0idxpa5ga0idxval = 10 0xfe80 0x1369 0xfb16 val" pa5gha0idxval = 8 0xfe8b 0x1395 0xfb04 mac = 58:EF:68:46:21:BC sn = 10A30C67704027 wsc_pin = 58113073 country = EU 2g_country_code = EU 5g_country_code = EU unused_offset=de cmd=[misc -t get_pa5gha1idxval -w 3 ] Change to "bootnpa2ga1idxval = 8 0xff34 0x131a 0xfb45 v get pa5gha1idxpa5ga0idxval = 10 0xfe80 0x1369 0xfb16 val" pa5gha0idxval = 8 0xfe8b 0x1395 0xfb04 mac = 58:EF:68:46:21:BC sn = 10A30C67704027 wsc_pin = 58113073 country = EU 2g_country_code = EU 5g_country_code = EU unused_offset=de 5G high idx[8] w0a0[0xfe8b] w1a0[0x1395] w2a0[0xfb04] Update [0xfe8b] to [0xfe8b] Update [0x1395] to [0x1395] Update [0xfb04] to [0xfb04] Using default 5G high PA1 value cmd=[misc -t get_pa5gla0idxval -w 3 ] Change to pa2ga1idxval = 8 0xff34 0x131a 0xfb45 "bootnv get pa5gpa5ga0idxval = 10 0xfe80 0x1369 0xfb16 la0idxval" pa5gha0idxval = 8 0xfe8b 0x1395 0xfb04 mac = 58:EF:68:46:21:BC sn = 10A30C67704027 wsc_pin = 58113073 country = EU 2g_country_code = EU 5g_country_code = EU unused_offset=de cmd=[misc -t get_pa5gla1idxval -w 3 ] Change to "bootnpa2ga1idxval = 8 0xff34 0x131a 0xfb45 v get pa5gla1idxpa5ga0idxval = 10 0xfe80 0x1369 0xfb16 val" pa5gha0idxval = 8 0xfe8b 0x1395 0xfb04 mac = 58:EF:68:46:21:BC sn = 10A30C67704027 wsc_pin = 58113073 country = EU 2g_country_code = EU 5g_country_code = EU unused_offset=de Using default 5G low PA0 value Using default 5G low PA1 value cmd=[misc -t get_pa5ga0idxval -w 3 ] Change to "bootnpa2ga1idxval = 8 0xff34 0x131a 0xfb45 v get pa5ga0idxvpa5ga0idxval = 10 0xfe80 0x1369 0xfb16 al" pa5gha0idxval = 8 0xfe8b 0x1395 0xfb04 mac = 58:EF:68:46:21:BC sn = 10A30C67704027 wsc_pin = 58113073 country = EU 2g_country_code = EU 5g_country_code = EU unused_offset=de cmd=[misc -t get_pa5ga1idxval -w 3 ] Change to "bootnpa2ga1idxval = 8 0xff34 0x131a 0xfb45 v get pa5ga1idxvpa5ga0idxval = 10 0xfe80 0x1369 0xfb16 al" pa5gha0idxval = 8 0xfe8b 0x1395 0xfb04 mac = 58:EF:68:46:21:BC sn = 10A30C67704027 wsc_pin = 58113073 country = EU 2g_country_code = EU 5g_country_code = EU unused_offset=de 5G middle idx[10] w0a0[0xfe80] w1a0[0x1369] w2a0[0xfb16] Update [0xfe80] to [0xfe80] Update [0x1369] to [0x1369] Update [0xfb16] to [0xfb16] Using default 5G middle PA1 value Cannot find lang from /proc/mtd www -> /www mount: No such file or directory cmd=[insmod emf ] cmd=[insmod igs ] cmd=[insmod ctf ] cmd=[insmod /lib/ufsd.ko ] modules[0]=et buf=[et ] modules[1]=wl buf=[et wl ] Needed modules: et wl cmd=[insmod et ] cmd=[insmod wl ] cmd=[insmod usb-storage ] cmd=[insmod ehci-hcd log2_irq_thresh=0 qtdc_pid=0 qtdc_vid=0 qtdc0_ep=0 qtdc0_sz=0 qtdc1_ep=0 qtdc1_sz=0 ] insmod: ehci-hcd.ko: no module by that name found cmd=[insmod wl_high instance_base=1 ] wl1 is up in 0 sec cmd=[insmod sxuptp_wq.ko ] cmd=[insmod sxuptp.ko ] cmd=[insmod sxuptp_driver.ko ] cmd=[insmod jcp.ko ] cmd=[insmod dnshook ] Failed trying to open `/proc/mdstat': No such file or directory Failed trying to open `/proc/sestat': No such file or directory Failed trying to open `/proc/mdstat': No such file or directory Failed trying to open `/proc/sestat': No such file or directory Hit enter to continue...The chipset is BCM5358U + BCM43236 NVRAM upgrade required. Starting. 1 nvram_commit(): start 1 nvram_commit(): end NVRAM upgrade complete. cmd=[killall httpd ] killall: httpd: no process killed killall: check_http.sh: no process killed cmd=[killall gn-httpd ] killall: gn-httpd: no process killed cmd=[killall gn-httpd ] killall: gn-httpd: no process killed cmd=[killall wm-httpd ] killall: wm-httpd: no process killed cmd=[et robowr 0x02 0x06 0x001000a0 ] cmd=[resetbutton ] cmd=[vconfig set_name_type VLAN_PLUS_VID_NO_PAD ] cmd=[vconfig add eth0 1 ] cmd=[vconfig set_ingress_map vlan1 0 0 ] cmd=[vconfig set_ingress_map vlan1 1 1 ] cmd=[vconfig set_ingress_map vlan1 2 2 ] cmd=[vconfig set_ingress_map vlan1 3 3 ] cmd=[vconfig set_ingress_map vlan1 4 4 ] cmd=[vconfig set_ingress_map vlan1 5 5 ] cmd=[vconfig set_ingress_map vlan1 6 6 ] cmd=[vconfig set_ingress_map vlan1 7 7 ] cmd=[vconfig add eth0 2 ] cmd=[vconfig set_ingress_map vlan2 0 0 ] cmd=[vconfig set_ingress_map vlan2 1 1 ] cmd=[vconfig set_ingress_map vlan2 2 2 ] cmd=[vconfig set_ingress_map vlan2 3 3 ] cmd=[vconfig set_ingress_map vlan2 4 4 ] cmd=[vconfig set_ingress_map vlan2 5 5 ] cmd=[vconfig set_ingress_map vlan2 6 6 ] cmd=[vconfig set_ingress_map vlan2 7 7 ] cmd=[brctl addbr br0 ] cmd=[brctl setfd br0 0 ] cmd=[brctl stp br0 dis ] cmd=[brctl addif br0 vlan1 ] br0: No child processes cmd=[wlconf vlan1 up ] vlan1: Operation not supported Write wireless mac successfully cmd=[brctl addif br0 eth1 ] br0: No child processes cmd=[wlconf eth1 up ] eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not permitted eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Operation not supported eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument eth1: Invalid argument cmd=[brctl addif br0 eth1 ] device eth1 is already a member of a bridge; can't enslave it to bridge br0. Write wireless mac successfully cmd=[brctl addif br0 eth2 ] br0: No child processes cmd=[wlconf eth2 up ] eth2: Invalid argument eth2: Operation not permitted eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported eth2: Operation not supported cmd=[brctl addif br0 eth2 ] device eth2 is already a member of a bridge; can't enslave it to bridge br0. cmd=[brctl addif br0 eth3 ] interface eth3 does not exist! eth3: No such device Set 1 to /proc/sys/net/ipv6/conf/br0/forwarding ... lo: File exists Set 66560 to /proc/sys/net/core/rmem_max ... cmd=[wl obss_coex 1 ] cmd=[wl -i eth2 ampdu_density 7 ] cmd=[tftpd -s /tmp -c -l -P 25V3 ] cmd=[cron ] The boot is CFE tftp server started tftpd: standalone socket cron: No such file or directory cron: created [HTTPD Starting on /www] cmd=[httpd ] cmd=[/tmp/wm-httpd -p 52000 -w ] cmd=[touch /tmp/hosts ] cmd=[dnsmasq -h -i br0 -c 0 -r /tmp/resolv.conf ] dnsmasq: unknown user or group: nobody cmd=[route del -net 224.0.0.0 netmask 240.0.0.0 dev br0 ] route: ioctl 0x890c failed: No such process cmd=[route add -net 224.0.0.0 netmask 240.0.0.0 dev br0 ] cmd=[cesmDNS -o /tmp/.mdns_host_info -d -h Linksys04027 -l 192.168.1.1 ] br0 192.168.1.100 86400 write_dhcpd_conf: file=/tmp/dhcpd-br0.conf, ifname=br0, lan_ip=lan_ipaddr lan_mask=lan_netmask cmd=[dhcpd -cf /tmp/dhcpd-br0.conf -lf /tmp/dhcpd.leases -df /tmp/udhcpd.leases -pf /var/run/dhcpd.pid br0 ] Internet Systems Consortium DHCP Server 4.1.1-P1 Copyright 2004-2010 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Wrote 0 leases to leases file. Listening on Socket/br0/192.168.1.0/24 Sending on Socket/br0/192.168.1.0/24 cmd=[upnp -D -W vlan2 ] cmd=[/bin/eapd ] eth1: Operation not supported UPnP::upnp_device_attach:br0: attach InternetGatewayDevice.xml ssdp byebye UPnP::upnp_init:UPnP daemon is ready to run cmd=[nas ] cmd=[killall wps_monitor ] killall: wps_monitor: no process killed cmd=[killall wps_ap ] killall: wps_ap: no process killed cmd=[killall wps_enr ] killall: wps_enr: no process killed cmd=[killall -9 wps_monitor ] killall: wps_monitor: no process killed cmd=[/bin/wps_monitor ] Failed trying to open `/proc/mdstat': No such file or directory Failed trying to open `/proc/sestat': No such file or directory 721 nvram_commit(): start 721 nvram_commit(): end wps_gpio_led_blink: wps_led blinkon1=0, blinkoff1=0, blinkticks1=0, blinkloops1=0 wps_status_gpio_led_blink: wps_status_led blinkon1=0, blinkoff1=0, blinkticks1=0, looptimes1=0, stopstag=0 1 nvram_commit(): start 1 nvram_commit(): end Failed trying to open `/proc/mdstat': No such file or directory Failed trying to open `/proc/sestat': No such file or directory enter write_cifs_config_file...1 hahaha enter add_accounts... add_accounts: buf=[admin:admin:admin:/:rw] add_accounts: write=rw, basic_info[0]=admin, new_passwd=admin cmd=[adduser -p admin admin -g root ] addgroup: group 0 already exists adduser: /tmp/ftproot/admin: No such file or directory Changing password for admin Password for admin changed by root admin: eval /usr/local/samba/bin/smbadduser admin admin cmd=[/usr/local/samba/bin/smbadduser admin admin ] account_policy_get: tdb_fetch_uint32 failed for field 1 (min password length), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 2 (password history), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 3 (user must logon to change password), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 4 (maximum password age), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 5 (minimum password age), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 6 (lockout duration), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 7 (reset count minutes), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 8 (bad lockout attempt), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 9 (disconnect time), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 10 (refuse machine password change), returning 0 Added user admin. cmd=[adduser -p guest guest -g guest ] adduser: /tmp/ftproot/guest: No such file or directory Changing password for guest Password for guest changed by root cmd=[/usr/local/samba/sbin/nmbd ] enter start_cifs... Failed trying to open `/proc/mdstat': No such file or directory Failed trying to open `/proc/sestat': No such file or directory Failed trying to open `/proc/mdstat': No such file or directory Failed trying to open `/proc/sestat': No such file or directory enter write_cifs_config_file...1 hahaha enter add_accounts... add_accounts: buf=[admin:admin:admin:/:rw] add_accounts: write=rw, basic_info[0]=admin, new_passwd=admin cmd=[adduser -p admin admin -g root ] addgroup: group 0 already exists adduser: /tmp/ftproot/admin: No such file or directory Changing password for admin Password for admin changed by root admin: eval /usr/local/samba/bin/smbadduser admin admin cmd=[/usr/local/samba/bin/smbadduser admin admin ] Added user admin. cmd=[adduser -p guest guest -g guest ] adduser: /tmp/ftproot/guest: No such file or directory Changing password for guest Password for guest changed by root cmd=[/usr/local/samba/sbin/smbd ] cmd=[/usr/local/samba/sbin/nmbd ] cmd=[killall -9 vsftpd ] killall: vsftpd: no process killed cmd=[nlinkd ] lltd:echo Linksys04027 > /proc/sys/kernel/hostname LLTD: wireless interface argument is eth1. cmd=[killall -1 radvd ] killall: radvd: no process killed cmd=[/sbin/monitor_cable ] cmd=[/usr/sbin/arp -c ] cmd=[touch /tmp/hosts ] start_dhcpc:=====( wan_or_lan=wan )===== cmd=[killall wan_auto_detect ] killall: wan_auto_detect: no process killed cmd=[/sbin/wan_auto_detect ] dhcpc_main,reason[PREINIT] start_wan_ipv6: [IPV6] vlan2 dhcp cmd=[touch /tmp/hosts ] start_wan_ipv6: [IPV6] 0 DEBUG, adapter index 8 DEBUG, adapter hardware address 58:ef:68:46:21:bd DEBUG, adapter index 8 DEBUG, adapter hardware address 58:ef:68:46:21:bd Send PPPoE PADI Send 32 bytes Hit enter to continue...start_dhcp6c:=====( wan_or_lan=wan )===== Hit enter to continue...Invalid AUTH option cache. dhcpc_main,reason[BOUND] cmd=[killall -SIGUSR1 upnp ] clear upnp entry cmd=[touch /tmp/hosts ] cmd=[killall -16 dhcpd ] cmd=[killall dhcpd ] Hit enter to continue...cmd=[killall -16 gn-dhcpd ] killall: gn-dhcpd: no process killed cmd=[killall gn-dhcpd ] killall: gn-dhcpd: no process killed br0 192.168.1.100 86400 write_dhcpd_conf: file=/tmp/dhcpd-br0.conf, ifname=br0, lan_ip=lan_ipaddr lan_mask=lan_netmask cmd=[dhcpd -cf /tmp/dhcpd-br0.conf -lf /tmp/dhcpd.leases -df /tmp/udhcpd.leases -pf /var/run/dhcpd.pid br0 ] Internet Systems Consortium DHCP Server 4.1.1-P1 Copyright 2004-2010 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Wrote 0 leases to leases file. Listening on Socket/br0/192.168.1.0/24 Sending on Socket/br0/192.168.1.0/24 cmd=[killall dnsmasq ] killall: dnsmasq: no process killed cmd=[dnsmasq -h -i br0 -c 0 -r /tmp/resolv.conf ] Hit enter to continue... [DBG]calling start_firewall routine.cmd=[iptables-restore /tmp/.ipt ] Set 1 to /proc/sys/net/ipv4/ip_forward ... Set 12288 to /proc/sys/net/ipv4/netfilter/ip_conntrack_max ... Set 600 to /proc/sys/net/ipv4/netfilter/ip_conntrack_tcp_timeout_established ... Set 65 to /proc/sys/net/ipv4/netfilter/ip_conntrack_udp_timeout ... Set 1 to /proc/sys/net/ipv4/icmp_echo_ignore_broadcasts ... cmd=[killall -SIGUSR1 upnp ] reset upnp entry cmd=[killall igmprt ] killall: igmprt: no process killed RCV: X-- Server ID: 03:01:00:60:96:b2:f1:00:00:00:08:01:36:20:c1:c4:55:9b:cc:9d=====( auto detect - dhcp connected!! )===== Hit enter to continue...Cannot find out link-local address for interfaces: vlan1 cmd=[ip6tables-restore /tmp/.ip6t ] Set 1 to /proc/sys/net/ipv6/conf/all/forwarding ... cmd=[killall dnsmasq ] Hit enter to continue...cmd=[killall radvd ] killall: radvd: no process killed cmd=[killall dhcpd6 ] killall: dhcpd6: no process killed cmd=[ip6tables -F ] cmd=[dnsmasq -h -i br0 -c 0 -r /tmp/resolv.conf ] Hit enter to continue...cmd=[killall process_monitor ] killall: process_monitor: no process killed cmd=[process_monitor ] num_servers=1 cmd=[radvd -C /tmp/radvd.conf ] Internet Systems Consortium DHCP Server 4.1.1-P1 Copyright 2004-2010 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Wrote 0 leases to leases file. Bound to *:547 Listening on Socket/9/br0/fd09:cc5e:1aa7:8::/62 Sending on Socket/9/br0/fd09:cc5e:1aa7:8::/62 No subnet6 declaration for vlan2 (fe80::5aef:68ff:fe46:21bd). ** Ignoring requests on vlan2. If this is not what you want, please write a subnet6 declaration Hit enter to continue...cmd=[igmpxmld -v -b -u vlan2 -d br0 -q 0 -m 6to6 ] in your dhcpd.conf file for the network segment to which interface vlan2 is attached. ** Hit enter to continue...Cannot find out link-local address for interfaces: vlan1 cmd=[ip6tables-restore /tmp/.ip6t ] Set 1 to /proc/sys/net/ipv6/conf/all/forwarding ... cmd=[touch /tmp/hosts ] gethostbyname 0.pool.ntp.org successed!! func[do_ntp],ntp server is:[0.pool.ntp.org 1.pool.ntp.org 2.pool.ntp.org] cmd=[ntpclient -h 4 0.pool.ntp.org 1.pool.ntp.org 2.pool.ntp.org -l -s -i 5 -c 1 ] File /tmp/ntp_firstboot not exist!, First boot!! return code=0, from ntpclient -08,-08,-08 1 1 Time update successfully, adjust time. (adjust:-8.000000) Year:2021,Month:5,Day:8,Hour:7,Min:49,Sec:7 TimeZone:4,i=4,starthour=2,startm=3,endhour=1,endmonth=11,diffm=0,j=14 Adjust daylight dstBias:3600 ,Year:2021,Month:5,Day:8,Hour:8,Min:49,Sec:7 cmd=[filtersync ] cmd=[generate_ula -nvram local_ula ] 1006 nvram_commit(): start cmd=[killall -9 ez-ipupdate ] killall: ez-ipupdate: no process killed cmd=[killall -9 tzoupdate-1.11 ] killall: tzoupdate-1.11: no process killed cmd=[killall process_monitor ] Hit enter to continue...cmd=[process_monitor ] num_servers=1 gethostbyname 0.pool.ntp.org successed!! func[do_ntp],ntp server is:[0.pool.ntp.org 1.pool.ntp.org 2.pool.ntp.org] cmd=[ntpclient -h 4 0.pool.ntp.org 1.pool.ntp.org 2.pool.ntp.org -l -s -i 5 -c 1 ] cmd=[killall zebra ] return code=0, from ntpclient -08,-08,-08 1 1 Time update successfully, adjust time. (adjust:-8.000000) Year:2021,Month:5,Day:8,Hour:7,Min:49,Sec:8 TimeZone:4,i=4,starthour=2,startm=3,endhour=1,endmonth=11,diffm=0,j=14 Adjust daylight dstBias:3600 ,Year:2021,Month:5,Day:8,Hour:8,Min:49,Sec:8 cmd=[filtersync ] We need to re-update after 86400 seconds killall: zebra: no process killed cmd=[killall ripd ] killall: ripd: no process killed cmd=[killall wps_monitor ] cmd=[killall wps_ap ] killall: wps_ap: no process killed 1006 nvram_commit(): end Hit enter to continue...Hit enter to continue...cmd=[killall -9 wps_monitor ] killall: wps_monitor: no process killed cmd=[killall wps_monitor ] killall: wps_monitor: no process killed cmd=[killall wps_ap ] killall: wps_ap: no process killed cmd=[killall wps_enr ] killall: wps_enr: no process killed cmd=[killall -9 wps_monitor ] killall: wps_monitor: no process killed cmd=[/bin/wps_monitor ] cmd=[killall -9 cron ] wps_gpio_led_blink: wps_led blinkon1=0, blinkoff1=0, blinkticks1=0, blinkloops1=0 wps_status_gpio_led_blink: wps_status_led blinkon1=0, blinkoff1=0, blinkticks1=0, looptimes1=0, stopstag=0 Hit enter to continue...cmd=[cron ] cmd=[killall -9 qos_bw_detect ] killall: qos_bw_detect: no process killed cmd=[qos ] cmd=[qos_bw_detect ] cmd=[killall -9 vsftpd ] qos_bw_detect wait_time = 172800 seconds killall: vsftpd: no process killed Hit enter to continue...

CFE version 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: 07/13/15 05:34:20 EDT (lzh@team2) Copyright (C) 2000-2008 Broadcom Corporation. Init Arena Init Devs. This is a Serial Flash Boot partition size = 262144(0x40000) Found a 16MB ST compatible serial flash et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.127.2901 @VERSION_TYPE@ CPU type 0x19749: 300MHz Tot mem: 65536 KBytes CFE mem: 0x80700000 - 0x807A2670 (665200) Data: 0x80735190 - 0x807391B0 (16416) BSS: 0x807391B0 - 0x8073C670 (13504) Heap: 0x8073C670 - 0x807A0670 (409600) Stack: 0x807A0670 - 0x807A2670 (8192) Text: 0x80700000 - 0x80735184 (217476) Boot version: v6.07 The boot is CFE Nothing... The country is same ### CLKDIV= 0x80e0842, SFlashClkDiv=8 clkdivsf=2 ### ### Change it to 0x20e0842 (2) ### Device eth0: hwaddr 58-EF-68-46-21-BC, ipaddr 192.168.1.1, mask 255.255.255.0 gateway not set, nameserver not set Header CRC: 0x33AED818 Calculate CRC: 0x33AED818 Image 1 is OK Try to load image 1. Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null) Loading: Failed. Could not load :: Timeout occured Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: .. 3832 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000 [ 0.000000] Linux version 4.14.221 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11306-c4a6851c72)) #0 Mon Feb 15 15:22:37 2021 [ 0.000000] CPU0 revision is: 00019749 (MIPS 74Kc) [ 0.000000] bcm47xx: Using bcma bus [ 0.000000] (NULL device *): bus0: Found chip with id 0x5357, rev 0x02 and package 0x08 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] This processor doesn't support highmem. -65536k highmem ignored [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] random: get_random_bytes called from 0x80459744 with crng_init=0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: noinitrd console=ttyS0,115200 [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 59904K/65536K available (3818K kernel code, 163K rwdata, 460K rodata, 220K init, 301K bss, 5632K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 128 [ 0.000000] (NULL device *): bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x26, class 0x0) [ 0.000000] (NULL device *): bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1C, class 0x0) [ 0.000000] (NULL device *): bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x03, class 0x0) [ 0.000000] (NULL device *): bus0: Core 3 found: MIPS 74K (manuf 0x4A7, id 0x82C, rev 0x04, class 0x0) [ 0.000000] (NULL device *): bus0: Core 4 found: USB 2.0 Host (manuf 0x4BF, id 0x819, rev 0x05, class 0x0) [ 0.000000] (NULL device *): bus0: Core 5 found: DDR1/DDR2 Memory Controller (manuf 0x4BF, id 0x82E, rev 0x02, class 0x0) [ 0.000000] (NULL device *): bus0: Core 6 found: I2S (manuf 0x4BF, id 0x834, rev 0x02, class 0x0) [ 0.000000] (NULL device *): bus0: Core 7 found: Internal Memory (manuf 0x4BF, id 0x80E, rev 0x0B, class 0x0) [ 0.000000] (NULL device *): bus0: Found M25FL128 serial flash (size: 16384KiB, blocksize: 0x10000, blocks: 256) [ 0.000000] (NULL device *): bus0: Early bus registered [ 0.000000] MIPS: machine is Unknown Board [ 0.000000] bcm47xx: Setting up vectored interrupts [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 12741736309 ns [ 0.000022] sched_clock: 32 bits at 150MHz, resolution 6ns, wraps every 14316557820ns [ 0.000158] Calibrating delay loop... 149.91 BogoMIPS (lpj=749568) [ 0.070105] pid_max: default: 32768 minimum: 301 [ 0.070671] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.070729] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.075966] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.076036] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.077823] NET: Registered protocol family 16 [ 0.118419] clocksource: Switched to clocksource MIPS [ 0.121514] NET: Registered protocol family 2 [ 0.123590] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.123675] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.123734] TCP: Hash tables configured (established 1024 bind 1024) [ 0.124067] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.124146] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.124729] NET: Registered protocol family 1 [ 0.170448] can not parse nvram name sb/1/ag0(null) with value 0x82 got -34 [ 0.170514] can not parse nvram name sb/1/ag1(null) with value 0x83 got -34 [ 0.219680] 2(S)* [ 0.219690] 3 [ 0.219717] 4 [ 0.219737] 5 [ 0.219757] 6 [ 0.219776] D [ 0.219796] I [ 0.219815] [ 0.219858] 2(S) [ 0.219867] 3* [ 0.219888] 4 [ 0.219907] 5 [ 0.219926] 6 [ 0.219946] D [ 0.219965] I [ 0.219984] [ 0.220027] 2(S) [ 0.220036] 3 [ 0.220056] 4* [ 0.220076] 5 [ 0.220095] 6 [ 0.220114] D [ 0.220134] I [ 0.220153] [ 0.220194] 2(S) [ 0.220203] 3 [ 0.220223] 4 [ 0.220243] 5 [ 0.220262] 6 [ 0.220281] D [ 0.220301] I* [ 0.220319] [ 0.220362] 2(S) [ 0.220371] 3 [ 0.220392] 4 [ 0.220411] 5* [ 0.220430] 6 [ 0.220450] D [ 0.220469] I [ 0.220488] [ 0.220531] 2(S) [ 0.220540] 3 [ 0.220561] 4 [ 0.220580] 5 [ 0.220599] 6 [ 0.220619] D* [ 0.220638] I [ 0.220657] [ 0.220698] 2(S)* [ 0.220708] 3 [ 0.220728] 4 [ 0.220747] 5 [ 0.220767] 6 [ 0.220786] D [ 0.220805] I [ 0.220824] [ 0.220865] 2(S) [ 0.220874] 3 [ 0.220895] 4 [ 0.220914] 5 [ 0.220933] 6 [ 0.220953] D [ 0.220972] I* [ 0.220991] [ 0.223318] (NULL device *): bus0: Bus registered [ 0.224844] Crashlog allocated RAM at address 0x3f00000 [ 0.232778] workingset: timestamp_bits=30 max_order=14 bucket_order=0 [ 0.246665] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.246712] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.273134] io scheduler noop registered [ 0.273184] io scheduler deadline registered (default) [ 0.273895] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.280043] console [ttyS0] disabled [ 0.300415] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 2, base_baud = 1250000) is a U6_16550A [ 0.881437] console [ttyS0] enabled [ 0.971735] 3 bcm47xxpart partitions found on MTD device bcm47xxsflash [ 0.978468] Creating 3 MTD partitions on "bcm47xxsflash": [ 0.983994] 0x000000000000-0x000000040000 : "boot" [ 0.996847] 0x000000040000-0x000000ff0000 : "firmware" [ 1.004244] 3 trx partitions found on MTD device firmware [ 1.009878] Creating 3 MTD partitions on "firmware": [ 1.014980] 0x00000000001c-0x000000000944 : "loader" [ 1.026039] 0x000000000944-0x000000175000 : "linux" [ 1.034420] 0x000000175000-0x000000fb0000 : "rootfs" [ 1.041510] mtd: device 4 (rootfs) set to be root filesystem [ 1.047330] 1 squashfs-split partitions found on MTD device rootfs [ 1.053784] 0x0000003d0000-0x000000fb0000 : "rootfs_data" [ 1.066759] 0x000000ff0000-0x000001000000 : "nvram" [ 1.081408] libphy: Fixed MDIO Bus: probed [ 1.085882] bgmac_bcma bcma0:2: Found PHY addr: 30 (NOREGS) [ 1.106541] b53_common: found switch: BCM5325, rev 4 [ 1.111815] libphy: bcma_mdio mii bus: probed [ 1.116287] bgmac_bcma bcma0:2: Support for Roboswitch not implemented [ 1.220207] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.226544] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds) [ 1.237341] NET: Registered protocol family 10 [ 1.251943] Segment Routing with IPv6 [ 1.255930] NET: Registered protocol family 17 [ 1.260719] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.273975] 8021q: 802.1Q VLAN Support v1.8 [ 1.289939] VFS: Mounted root (squashfs filesystem) readonly on device 31:4. [ 1.299162] Freeing unused kernel memory: 220K [ 1.303707] This architecture does not have kernel memory protection. [ 2.576786] init: Console is alive [ 2.580955] init: - watchdog - [ 2.595256] random: fast init done [ 4.112166] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 4.311039] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 4.329432] init: - preinit - [ 7.087029] random: jshn: uninitialized urandom read (4 bytes read) [ 7.363040] random: jshn: uninitialized urandom read (4 bytes read) [ 7.541271] random: jshn: uninitialized urandom read (4 bytes read) [ 7.860880] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.867068] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 8.888603] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 8.895849] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready [ 11.575937] jffs2: notice: (362) jffs2_build_xattr_subsystem: complete building xattr subsystem, 35 of xdatum (0 unchecked, 35 orphan) and 35 of xref (35 dead, 0 orphan) found. [ 11.594421] mount_root: switching to jffs2 overlay [ 11.640874] overlayfs: upper fs does not support tmpfile. [ 11.656344] urandom-seed: Seeding with /etc/urandom.seed [ 11.915418] procd: - early - [ 11.918793] procd: - watchdog - [ 12.606012] procd: - watchdog - [ 12.610329] procd: - ubus - [ 12.765078] urandom_read: 1 callbacks suppressed [ 12.765099] random: ubusd: uninitialized urandom read (4 bytes read) [ 12.934815] random: ubusd: uninitialized urandom read (4 bytes read) [ 12.942551] random: ubusd: uninitialized urandom read (4 bytes read) [ 12.952202] procd: - init - Please press Enter to activate this console. [ 15.092251] kmodloader: loading kernel modules from /etc/modules.d/* [ 15.133688] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 15.177164] Loading modules backported from Linux version v4.19.161-0-gdaefdc9eb24b [ 15.185076] Backport generated by backports.git v4.19.161-1-0-g4bb568fe [ 15.213711] ip_tables: (C) 2000-2006 Netfilter Core Team [ 15.254056] nf_conntrack version 0.5.0 (1024 buckets, 4096 max) [ 15.385171] urngd: v1.0.2 started. [ 15.498975] xt_time: kernel timezone is -0000 [ 15.740407] PPP generic driver version 2.4.2 [ 15.760444] NET: Registered protocol family 24 [ 15.813820] b43-phy0: Broadcom 5357 WLAN found (core revision 28) [ 15.838476] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 9 [ 15.844709] b43-phy0 ERROR: FOUND UNSUPPORTED RADIO (Manuf 0x17F, ID 0x2057, Revision 5, Version 2) [ 15.854053] b43: probe of bcma0:1 failed with error -122 [ 15.859824] Broadcom 43xx driver loaded [ Features: NL ] [ 15.906644] kmodloader: done loading kernel modules from /etc/modules.d/* [ 16.010893] random: crng init done [ 16.014392] random: 3 urandom warning(s) missed due to ratelimiting [ 39.684212] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 39.899232] br-lan: port 1(eth0.1) entered blocking state [ 39.904758] br-lan: port 1(eth0.1) entered disabled state [ 39.911161] device eth0.1 entered promiscuous mode [ 39.916070] device eth0 entered promiscuous mode [ 40.087941] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 40.152770] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready [ 40.729532] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 40.796199] br-lan: port 1(eth0.1) entered blocking state [ 40.801833] br-lan: port 1(eth0.1) entered forwarding state [ 40.808289] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready [ 40.928588] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready