ipTIME AX2002MESH
Supported Versions
Hardware Highlights
Installation
Stock Web Interface
Specific values needed for the stock web interface
| initramfs-factory image | see Factory snapshot image link above |
|---|---|
| sysupgrade image | see Factory sysupgrade image link above |
- Flash the initramfs-factory image through the web page.
- Boot into OpenWrt and perform sysupgrade with sysupgrade image.
Recovery mode
Specific values needed for the recovery mode
| initramfs-factory image | see Factory snapshot image link above |
|---|---|
| sysupgrade image | see Factory sysupgrade image link above |
- Turn on the device and press the Reset button more than 10 seconds to enter recovery mode.
- Access the recovery web interface at
192.168.0.1/24and flash the initramfs-factory image. - Boot into OpenWrt and perform sysupgrade with sysupgrade image.
Basic Configuration
→ Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.
Hardware
Info
