Show pagesourceOld revisionsBacklinksBack to top × Table of Contents I-O Data WN-AX2033GR Getting started with a new Device Page Keep the articles modular Supported Versions Hardware Highlights Installation Recovery instructions Flash Layout OEM easy installation OEM installation using the TFTP method Upgrading OpenWrt LuCI Web Upgrade Process Terminal Upgrade Process Debricking Failsafe mode Basic configuration Specific Configuration Network interfaces Switch Ports (for VLANs) Buttons Hardware Info Photos Opening the case Serial JTAG Bootlogs OEM bootlog OpenWrt bootlog Notes Tags I-O Data WN-AX2033GR Under Construction! This page is currently under construction. You can edit the article to help completing it. I-O DATA WN-AX2033GR is a wireless routr which is roughly the same as I-O DATA WN-AX1167GR2. The difference is Wi-Fi feature. Any text with a light background (like this one) provides instructions for creating the Details Page. When you have filled in correct/useful information (instead of any template that's there) remove the instructions, as well as the <WRAP> that encloses it. Getting started with a new Device Page This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that you have to fill it with life and information. There are several “fixme” tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness. When there are no more “fixme” tags left, delete this one too, along with the <WRAP> that encloses it. Keep the articles modular Please include only model specific information, omit bla,bla and put everything generic into separate articles If you have no time to write certain stuff, link to docs base-system should lead the way, do not explain this again DO NOT provide a complete howto here! Instead groom the general documentation. Supported Versions BrandModelVersionCurrent ReleaseOEM InfoForum SearchTechnical DataI-O DataWN-AX2033GR22.03.5https://www.iodata.jp/product/network/wnlan/wn-ax2033gr/WN-AX2033GRView/Edit data Hardware Highlights ModelVersionSoCCPU MHzFlash MBRAM MBWLAN HardwareWLAN2.4WLAN5.0100M portsGbit portsModemUSBWN-AX2033GRMediaTek MT7621A880128NAND128MediaTek MT7603E, MediaTek MT7615b/g/na/n/ac--- Installation ModelVersionCurrent ReleaseFirmware OpenWrt InstallFirmware OpenWrt UpgradeFirmware OEM StockWN-AX2033GR22.03.5https://downloads.openwrt.org/releases/22.03.5/targets/ramips/mt7621/openwrt-22.03.5-ramips-mt7621-iodata_wn-ax2033gr-initramfs-kernel.binhttps://downloads.openwrt.org/releases/22.03.5/targets/ramips/mt7621/openwrt-22.03.5-ramips-mt7621-iodata_wn-ax2033gr-squashfs-sysupgrade.binhttp://¿ Open the router management page (192.168.0.1) in your webbrowser. Update router firmware using initramfs-kernel.bin. After updating, run sysupgrade with sysupgrade.bin. Recovery instructions WN-AX2033GR contains Zyxel Z-LOADER Setup TFTP server (IP address: 10.10.10.3). Put official firmware into TFTP server directory (distribution site: https://www.iodata.jp/lib/software/w/2068.htm) Connect WX-AX2033GR ethernet port and computer that runs TFTP server. Connect to serial console. Interrupt booting by Esc key. Flash firmware using ATNR 1,[firmware filename] command. Flash Layout Find out flash layout, then add the flash layout table here (copy, paste, modify the example). Please check out the article Flash layout. It contains examples and explanations that describe how to document the flash layout. OEM easy installation The instructions below are for Broadcom devices and only serve as an example. Remove / modify them if they do not apply to this particular device! This section deals with How you install OpenWrt from a device freshly opened The steps required such as reset to factory defaults if the device has already been configured Note: Reset router to factory defaults if it has been previously configured. Browse to http://192.168.1.1/Upgrade.asp Upload .bin file to router Wait for it to reboot Telnet to 192.168.1.1 and set a root password, or browse to http://192.168.1.1 if LuCI is installed. OEM installation using the TFTP method → generic.flashing.tftp Specific values needed for tftp Enter values for “FILL-IN” below Bootloader tftp server IPv4 address FILL-IN Bootloader MAC address (special) FILL-IN Firmware tftp image Latest OpenWrt release (NOTE: Name must contain “tftp”) TFTP transfer window FILL-IN seconds TFTP window start approximately FILL-IN seconds after power on TFTP client required IP address FILL-IN Upgrading OpenWrt → generic.sysupgrade These are generic instructions. Update with your router's specifics. LuCI Web Upgrade Process Browse to http://192.168.1.1/cgi-bin/luci/mini/system/upgrade/ LuCI Upgrade URL Upload image file for sysupgrade to LuCI Wait for reboot Terminal Upgrade Process If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line. There are two command line methods for upgrading: sysupgrade mtd Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing. sysupgrade Login as root via SSH on 192.168.1.1, then enter the following commands: cd /tmp wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc sysupgrade /tmp/xxx.abc mtd If sysupgrade does not support this router, use mtd. Login as root via SSH on 192.168.1.1, then enter the following commands: cd /tmp wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc mtd write /tmp/xxx.abc linux && reboot Debricking → generic.debrick Failsafe mode → failsafe_and_factory_reset Basic configuration → Basic configuration After flashing, proceed with this. Set up your Internet connection, configure wireless, configure USB port, etc. Specific Configuration Please fill in real values for this device, then remove the EXAMPLEs Network interfaces The default network configuration is: Interface Name Description Default configuration br-lan EXAMPLE LAN & WiFi EXAMPLE 192.168.1.1/24 vlan0 (eth0.0) EXAMPLE LAN ports (1 to 4) EXAMPLE None vlan1 (eth0.1) EXAMPLE WAN port EXAMPLE DHCP wl0 EXAMPLE WiFi EXAMPLE Disabled Switch Ports (for VLANs) Please fill in real values for this device, then remove the EXAMPLEs Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on. Port Switch port Internet (WAN) EXAMPLE 4 LAN 1 EXAMPLE 3 LAN 2 EXAMPLE 2 LAN 3 EXAMPLE 1 LAN 4 EXAMPLE 0 Buttons → hardware.button on howto use and configure the hardware button(s). Here, we merely name the buttons, so we can use them in the above Howto. Please fill in real values for this device, then remove the EXAMPLEs The I-O Data WN-AX2033GR has the following buttons: BUTTON Event EXAMPLE Reset reset EXAMPLE Secure Easy Setup ses EXAMPLE No buttons at all. - Hardware Info General Brand I-O Data Model WN-AX2033GR Versions Device Type WiFi Router Availability Available 2020 Comments - general OpenWrt Support Supported Since Commit https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=e66becb490796d0787f8bd2448ee6f14198a904a Supported Since Release 21.02.0 Supported Current Release 22.03.5 Unsupported Hardware Bootloader ¿ Target ramips System-On-Chip CPU MHz 880 Flash MB 128NAND RAM MB 128 Network Ethernet 100M ports - Ethernet 1Gbit ports Switch ¿ Modem - VLAN ¿ Comments - network ports Wireless WLAN 2.4GHz b/g/n WLAN 5.0GHz a/n/ac WLAN Hardware MediaTek MT7603E, MediaTek MT7615 Detachable Antennas - Comments - WLAN Interfaces USB ports - SATA ports - Serial Yes JTAG ¿ Comments - USB & SATA ports Misc LED count 2 Button count 3 Power supply 12 VDC Links Forum Topic URL WikiDevi URL OEM device homepage URL https://www.iodata.jp/product/network/wnlan/wn-ax2033gr/ Firmware OEM Stock URL http://¿ Firmware OpenWrt Install URL https://downloads.openwrt.org/releases/22.03.5/targets/ramips/mt7621/openwrt-22.03.5-ramips-mt7621-iodata_wn-ax2033gr-initramfs-kernel.bin Firmware OpenWrt Upgrade URL https://downloads.openwrt.org/releases/22.03.5/targets/ramips/mt7621/openwrt-22.03.5-ramips-mt7621-iodata_wn-ax2033gr-squashfs-sysupgrade.bin Edit the underlying data View/Edit data Photos Front: Insert photo of front of the casing Back: Insert photo of back of the casing Backside label: Insert photo of backside label Opening the case Note: This will void your warranty! Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, ... To remove the cover and open the device, do a/b/c Main PCB: Insert photo of PCB Serial → port.serial general information about the serial port, serial port cable, etc. How to connect to the Serial Port of this specific device: Insert photo of PCB with markings for serial port Serial connection parameters for I-O Data WN-AX2033GR 57600, 8N1 JTAG → port.jtag general information about the JTAG port, JTAG cable, etc. How to connect to the JTAG Port of this specific device: Insert photo of PCB with markings for JTAG port Bootlogs OEM bootlog COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE OpenWrt bootlog COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING Notes Space for additional notes, links to forum threads or other resources. ... Tags How to add tags ramips, MT7621, 128NAND, 128RAM, 5port, GigabitEthernet, 802.11abgnac, 0USB, 2core, MIPS This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.OKMore information about cookies ramips mt7621 128nand 128ram 5port gigabitethernet 802.11abgnac 0usb 2core mips Last modified: 2022/05/03 14:30by tmomas