Techdata: Xunlong Orange Pi Zero3

The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile.

Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI

  • IMPORTANT : Edit this page only via the LEFT edit button below the dataentry box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / ...)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum ...)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.
Device Type:
Single Board Computer
Brand:
Xunlong
Model:
Orange Pi Zero3
FCCID:
http://¿
Availability:
Available 2024
Where available:
aliexpress.com, amazon.com
Supported Since Commit:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=29b8ba75fa52d2a9db98521644dfcc61fcd6b6a1
Supported Current Rel:
snapshot
Gluon support:
unknown
Target:
sunxi
Subtarget:
cortexa53
Package architecture:
aarch64_cortex-a53
Bootloader:
U-Boot
CPU:
Allwinner H618
CPU Cores:
4
CPU MHz:
1500
Flash MB:
microSDHC
RAM MB:
1024
Ethernet 100M ports:
-
Ethernet 1Gbit ports:
-
Ethernet 2.5Gbit ports:
-
Ethernet 5Gbit ports:
-
Ethernet 10Gbit ports:
-
SFP ports:
-
SFP+ ports:
-
Switch:
-
VLAN:
¿
Modem:
-
Comments network ports:
Motorcomm YT8531C Phy
WLAN Hardware:
Allwinner AW859A
WLAN 2.4GHz:
b/g/n
WLAN 5.0GHz:
a/n/ac
WLAN 6.0GHz:
-
WLAN 60.0GHz:
-
WLAN Comments:
1x1:1 MIMO
WLAN driver:
other
Detachable Antennas:
1
Bluetooth:
5.0
USB ports:
1x 2.0, 1x Header, 1x OTG
SATA ports:
-
Video ports:
Composite, HDMI
Audio ports:
Headphone jack, other
Phone ports:
-
Comments AV ports:
Micro HDMI port, other AV available via 13 pin extension
Serial:
Yes
Serial connection parameters:
115200 / 8N1
Serial connection voltage:
3.3
JTAG:
¿
LED count:
¿
Button count:
¿
GPIOs:
more than 20
Power Supply:
5V/3A via USB Type C
Outdoor:
No
OpenVPN performance:
¿
Wireguard performance:
¿
WikiDevi URL:
https://wikidevi.wi-cat.ru/Orange_Pi_Zero_3
WikiDevi ID:
Orange_Pi_Zero_3
OEM Device Homepage URL:
http://¿
Firmware OEM Stock URL:
http://¿
Firmware OpenWrt Install URL:
http://¿
Firmware OpenWrt Upgrade URL:
http://¿
Firmware OpenWrt snapshot Install URL:
https://downloads.openwrt.org/snapshots/targets/sunxi/cortexa53/openwrt-sunxi-cortexa53-xunlong_orangepi-zero3-ext4-sdcard.img.gz
Firmware OpenWrt snapshot Upgrade URL:
https://downloads.openwrt.org/snapshots/targets/sunxi/cortexa53/openwrt-sunxi-cortexa53-xunlong_orangepi-zero3-ext4-sdcard.img.gz
Installation method(s):
SD card, Sunxi installation
Recovery method(s):
SD card
Picture:
picture: genericrouter1.png
Comments:
2x USB 2.0, Audio Stereo Out, Mic In, Video Out are available via 13 pin header.
General nomenclature

Details

Conventions per characteristic

Details

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2024/08/18 07:51
  • by raylynnknight