Techdata: Xunlong Orange Pi R1

  • IMPORTANT : Edit this page only via the LEFT edit button below the dataentry box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / ...)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum ...)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.
Device Type:
Single Board Computer
Brand:
Xunlong
Model:
Orange Pi R1
Availability:
Available 2019
Where available:
aliexpress.com, banggood.com
Supported Since Commit:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=5508510e744ce9dfaba23cb8639977f021bd29f9
Supported Since Rel:
18.06.0
Supported Current Rel:
23.05.4
Unsupported Functions:
WiFi 2.4GHz
Gluon support:
unknown
Target:
sunxi
Subtarget:
cortexa7
Package architecture:
arm_cortex-a7_neon-vfpv4
Bootloader:
U-Boot
CPU:
Allwinner H2+
CPU Cores:
4
CPU MHz:
1200
Flash MB:
16, microSDHC
RAM MB:
256
Ethernet 100M ports:
2
Ethernet 1Gbit ports:
-
Ethernet 2.5Gbit ports:
-
Ethernet 5Gbit ports:
-
Ethernet 10Gbit ports:
-
SFP ports:
-
SFP+ ports:
-
Switch:
¿
VLAN:
Yes
Modem:
-
Comments network ports:
Primary Ethernet port is from the CPU itself, the second Ethernet port is from RTL8152B via USB off the CPU
WLAN Hardware:
Realtek RTL8189ETV
WLAN 2.4GHz:
b/g/n
WLAN 5.0GHz:
-
WLAN Comments:
Staging driver (RTL8189ES), but no upstream support. Unofficial community fork exists but for v18.06 openwrt version only.
WLAN driver:
other
Detachable Antennas:
1
Bluetooth:
-
miniPCI ports:
-
USB ports:
1x Header, 1x OTG, 1x µUSB (power)
SATA ports:
-
Comments USB SATA ports:
uUSB supports FEL mode
Video ports:
Composite
Audio ports:
Microphone, Headphone jack
Phone ports:
-
Comments AV ports:
Composite Jack via 13 pin Orange Pi zero add-on header.
Serial:
Yes
Serial connection parameters:
115200 / 8N1
Serial connection voltage:
3.3
JTAG:
¿
LED count:
2
Button count:
-
GPIOs:
more than 20
Power Supply:
5 VDC, 2.0 A via USB Female Micro-B
Outdoor:
No
OpenVPN performance:
¿
Wireguard performance:
¿
Device Page:
orange_pi_r1
WikiDevi URL:
https://wikidevi.wi-cat.ru/Orange_Pi_R1
WikiDevi ID:
Orange_Pi_R1
OEM Device Homepage URL:
http://www.orangepi.org/OrangePiR1/
Firmware OEM Stock URL:
http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-Pi-R1.html
Firmware OpenWrt Install URL:
https://downloads.openwrt.org/releases/23.05.4/targets/sunxi/cortexa7/openwrt-23.05.4-sunxi-cortexa7-xunlong_orangepi-r1-ext4-sdcard.img.gz
Firmware OpenWrt Upgrade URL:
https://downloads.openwrt.org/releases/23.05.4/targets/sunxi/cortexa7/openwrt-23.05.4-sunxi-cortexa7-xunlong_orangepi-r1-ext4-sdcard.img.gz
Firmware OpenWrt snapshot Install URL:
https://downloads.openwrt.org/snapshots/targets/sunxi/cortexa7/openwrt-sunxi-cortexa7-xunlong_orangepi-r1-ext4-sdcard.img.gz
Firmware OpenWrt snapshot Upgrade URL:
https://downloads.openwrt.org/snapshots/targets/sunxi/cortexa7/openwrt-sunxi-cortexa7-xunlong_orangepi-r1-ext4-sdcard.img.gz
Installation method(s):
Sunxi installation
Recovery method(s):
SD card
Picture:
picture: orangepir1.jpg
Comments:
Mic, IR, Composite Audio & Video + 2x USB via 13 pin header only (compatible with Opi zero), no plug. 26 Pin GPIO unsoldered. Onboard Green and Red status LEDs.
General nomenclature

Details

Conventions per characteristic

Details

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2024/07/20 03:00
  • by raylynnknight