Techdata: TRENDnet THA-103AC v1.0R

  • IMPORTANT : Edit this page only via the LEFT edit button below the dataentry box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / ...)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum ...)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.
Device Type:
WiFi AP
Brand:
TRENDnet
Model:
THA-103AC
Version:
v1.0R
FCCID:
https://fccid.io/XU8THA103AC
Availability:
Discontinued
Where available:
-
Supported Since Commit:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=9e78db022985e1a4efebfcfde27e15068922fdca
Supported Since Rel:
-
Supported Current Rel:
snapshot
Image too big:
-
Unsupported Functions:
Integrated AC power monitoring and relay do not work in OpenWrt as the PL7223 chip source documentation is unavailable.
Gluon support:
unknown
Target:
ramips
Subtarget:
mt7620
Package architecture:
mipsel_24kc
Bootloader:
U-Boot
CPU:
MediaTek MT7620A
CPU Cores:
1
CPU MHz:
580
Flash MB:
8
RAM MB:
64
Ethernet 100M ports:
-
Ethernet 1Gbit ports:
-
Ethernet 2.5Gbit ports:
-
Ethernet 5Gbit ports:
-
Ethernet 10Gbit ports:
-
SFP ports:
-
SFP+ ports:
-
Switch:
-
VLAN:
No
Modem:
-
Comments network ports:
There's soldering pads on the PCB for 1 Ethernet port which can be used during recovery.
WLAN Hardware:
MediaTek MT7620A and Mediatek MT7610EN
WLAN 2.4GHz:
b/g/n
WLAN 5.0GHz:
a/n/ac
WLAN 6.0GHz:
-
WLAN 60.0GHz:
-
WLAN Comments:
After intial install press the WPS button to enable the default OpenWrt Wifi AP, the BLUE wifi LED will start flash.
WLAN driver:
mt76
Detachable Antennas:
-
Bluetooth:
-
miniPCI ports:
-
USB ports:
-
SATA ports:
-
Video ports:
-
Audio ports:
-
Phone ports:
-
Serial:
Yes
Serial connection parameters:
57600 / 8N1
Serial connection voltage:
3.3
JTAG:
No
LED count:
7
Button count:
2
GPIOs:
3
Power Supply:
100-240 VAC, 50-60 Hz
Outdoor:
No
OpenVPN performance:
-
Wireguard performance:
-
Device Page:
trendnet_tha-103ac_v1.0r
WikiDevi URL:
https://wikidevi.wi-cat.ru/TRENDnet_THA-101_V1.0R
OEM Device Homepage URL:
https://www.trendnet.com/products/smart-home/AC750/THA-103AC
Firmware OEM Stock URL:
https://downloads.trendnet.com/tha-103ac/firmware/fw_tha-103ac_v1(1.00_f-20170120).zip
Firmware OpenWrt Install URL:
http://
Firmware OpenWrt Upgrade URL:
http://
Firmware OpenWrt snapshot Install URL:
https://downloads.openwrt.org/snapshots/targets/ramips/mt7620/openwrt-ramips-mt7620-trendnet_tha103ac-initramfs-kernel.bin
Firmware OpenWrt snapshot Upgrade URL:
https://downloads.openwrt.org/snapshots/targets/ramips/mt7620/openwrt-ramips-mt7620-trendnet_tha103ac-squashfs-sysupgrade.bin
Installation method(s):
GUI OEM, U-Boot TFTP + serial recovery
Recovery method(s):
U-Boot TFTP + serial recovery
Comment recovery:
Need solder Ethernet pads on PCB and serial pads.
Picture:
picture: genericrouter1.png
Comments:
Upload the openwrt-ramips-mt7620-trendnet_tha103ac-initramfs-kernel.bin via the manufacturer firmware upgrade page on the device.
General nomenclature

Details

Conventions per characteristic

Details

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2024/12/15 07:54
  • by diepeterpan