Techdata: TP-Link TL-WPA8630 v1

  • IMPORTANT : Edit this page only via the LEFT edit button below the dataentry box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / ...)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum ...)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.
Device Type:
Range Extender
Brand:
TP-Link
Model:
TL-WPA8630
Version:
v1
FCCID:
https://fcc.io/TE7/WPA8630
Availability:
Discontinued 2018
Supported Since Commit:
https://git.lede-project.org/?p=source.git;a=commit;h=8cc0c34ef550ac2f842fe6811d32ac01af69d19f
Supported Since Rel:
17.01.0
Supported Current Rel:
23.05.0
Gluon support:
unknown
Target:
ar71xx-ath79
Subtarget:
generic
Package architecture:
mips_24kc
Bootloader:
U-Boot
CPU:
Qualcomm Atheros QCA9563
CPU Cores:
1
CPU MHz:
750
Flash MB:
8
RAM MB:
128
Ethernet 100M ports:
-
Ethernet 1Gbit ports:
3
Ethernet 2.5Gbit ports:
¿
Ethernet 5Gbit ports:
¿
Ethernet 10Gbit ports:
¿
SFP ports:
¿
SFP+ ports:
¿
Switch:
Qualcomm Atheros QCA8337
VLAN:
Yes
Modem:
Powerline
Comments network ports:
Powerline interface connected to switch port 5 (Label LAN4)
WLAN Hardware:
Qualcomm Atheros QCA9563, Qualcomm Atheros QCA9882
WLAN 2.4GHz:
b/g/n
WLAN 5.0GHz:
a/n/ac
WLAN driver:
ath10k
Detachable Antennas:
-
Bluetooth:
-
miniPCI ports:
¿
USB ports:
-
SATA ports:
-
Video ports:
-
Audio ports:
-
Phone ports:
-
Serial:
Yes
Serial connection parameters:
115200 / 8N1
Serial connection voltage:
¿
JTAG:
No
LED count:
4
Button count:
4
GPIOs:
-
Power Supply:
230 VAC
OpenVPN performance:
¿
Wireguard performance:
¿
WikiDevi URL:
https://wikidevi.wi-cat.ru/TP-LINK_TL-WPA8630
WikiDevi ID:
TP-LINK_TL-WPA8630
OEM Device Homepage URL:
https://www.tp-link.de/products/details/cat-18_TL-WPA8630-KIT.html
Firmware OpenWrt Install URL:
https://downloads.openwrt.org/releases/23.05.0/targets/ath79/generic/openwrt-23.05.0-ath79-generic-tplink_tl-wpa8630-v1-squashfs-factory.bin
Firmware OpenWrt Upgrade URL:
https://downloads.openwrt.org/releases/23.05.0/targets/ath79/generic/openwrt-23.05.0-ath79-generic-tplink_tl-wpa8630-v1-squashfs-sysupgrade.bin
Firmware OpenWrt snapshot Install URL:
https://downloads.openwrt.org/snapshots/targets/ath79/generic/openwrt-ath79-generic-tplink_tl-wpa8630-v1-squashfs-factory.bin
Firmware OpenWrt snapshot Upgrade URL:
https://downloads.openwrt.org/snapshots/targets/ath79/generic/openwrt-ath79-generic-tplink_tl-wpa8630-v1-squashfs-sysupgrade.bin
Installation method(s):
GUI generic
Comment installation:
Special image needed to flash out of the box, can be found at http://www.netadair.de/openwrt/
Recovery method(s):
U-Boot TFTP + serial recovery
Picture:
picture: tl-wpa8630.jpg
Comments:
PowerLine interface based on QCA7500 chip; can be controlled by package open-plc-utils-plctool. sysupgrade images can be used after initial flash with special image (not: factory). In order to avoid firmware crashes or the error "ath10k_pci 0000:00:00.0: SWBA overrun on vdev 1, skipped old beacon" which is being triggered from the 5Ghz interface radio0, disable ldpc on radio0. This must be done in /etc/config/wireless, section config wifi-device 'radio0' ... ADD: option ldpc '0'
General nomenclature

Details

Conventions per characteristic

Details

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2023/10/13 13:55
  • by tmomas