Techdata: Sinovoip BananaPi BPi-R3 V1.0

  • IMPORTANT : Edit this page only via the LEFT edit button below the dataentry box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / ...)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum ...)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.
Device Type:
Single Board Computer
Brand:
Sinovoip
Model:
Banana Pi BPi-R3
Version:
V1.0, V1.1
Availability:
Available 2024
Where available:
AliExpress.com, Taobao.com, banana-pi.org, amazon.com
Supported Since Commit:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=a96382c1bb204698cd43e82193877c10e4b63027
Supported Since Rel:
23.05.0
Supported Current Rel:
23.05.5
Image too big:
-
Gluon support:
unknown
Target:
mediatek
Subtarget:
filogic
Package architecture:
aarch64_cortex-a53
Bootloader:
U-Boot
CPU:
MediaTek MT7986A
CPU Cores:
4
CPU MHz:
2000
Flash MB:
32, 128NAND, eMMC, microSD
RAM MB:
2048
Ethernet 100M ports:
-
Ethernet 1Gbit ports:
5
Ethernet 2.5Gbit ports:
-
Ethernet 5Gbit ports:
-
Ethernet 10Gbit ports:
-
SFP ports:
2
SFP+ ports:
-
Switch:
MediaTek MT7531AE
VLAN:
Yes
Modem:
-
Comments network ports:
2x 1G/2.5G capable SFP cages, one connected to SoC GMAC1, one connected to MT7531 port 5
WLAN Hardware:
MediaTek MT7975N, MediaTek MT7975P
WLAN 2.4GHz:
b/g/n/ax
WLAN 5.0GHz:
a/n/ac/ax
WLAN Comments:
2.4GHz 4X4, 5GHz 4X4
WLAN driver:
mt76
Detachable Antennas:
8
Bluetooth:
-
miniPCI ports:
1x M.2 Key M PCIe and 1x miniPCIe (supports only USB).
USB ports:
2x 2.0, 1x 3.0
SATA ports:
-
Comments USB SATA ports:
on-board USB 2.0 hub with USB-lines of the mPCIe slot connected, plus two ports exposed on pin headers
Video ports:
-
Audio ports:
-
Phone ports:
-
Serial:
Yes
Serial connection parameters:
115200 / 8N1
Serial connection voltage:
3.3
JTAG:
Yes
LED count:
6
Button count:
2
GPIOs:
16
Power Supply:
12V/2A via barrel or JST
Outdoor:
No
Wireguard performance:
866
Device Page:
bananapi_bpi-r3
WikiDevi URL:
https://wikidevi.wi-cat.ru/Banana_Pi_BPI_R3
WikiDevi ID:
Banana_Pi_BPI_R3
OEM Device Homepage URL:
https://wiki.banana-pi.org/Banana_Pi_BPI-R3
Firmware OEM Stock URL:
https://wiki.banana-pi.org/Getting_Started_with_BPI-R3
Firmware OpenWrt Install URL:
https://downloads.openwrt.org/releases/23.05.5/targets/mediatek/filogic/openwrt-23.05.5-mediatek-filogic-bananapi_bpi-r3-sdcard.img.gz
Firmware OpenWrt Upgrade URL:
https://downloads.openwrt.org/releases/23.05.5/targets/mediatek/filogic/openwrt-23.05.5-mediatek-filogic-bananapi_bpi-r3-squashfs-sysupgrade.itb
Firmware OpenWrt snapshot Install URL:
https://downloads.openwrt.org/snapshots/targets/mediatek/filogic/openwrt-mediatek-filogic-bananapi_bpi-r3-sdcard.img.gz
Firmware OpenWrt snapshot Upgrade URL:
https://downloads.openwrt.org/snapshots/targets/mediatek/filogic/openwrt-mediatek-filogic-bananapi_bpi-r3-squashfs-sysupgrade.itb
Installation method(s):
SD card
Comment installation:
install from SD card to SPI-NOR or SPI-NAND, install from SPI-NAND to eMMC
Recovery method(s):
JTAG, SD card, U-Boot TFTP recovery, U-Boot TFTP + serial recovery, see devicepage
Comment recovery:
dual-boot capable U-Boot built from source is part of OpenWrt build
Picture:
picture: banana_pi_bpi-r3_router_2.jpg
General nomenclature

Details

Conventions per characteristic

Details

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2024/10/03 09:18
  • by essys