User Tools

Site Tools


toh:hwdata:raspberry_pi_foundation:raspberry_pi_zero_w

Techdata: Raspberry Pi Foundation Raspberry Pi Zero W

Devices with Broadcom WiFi chipsets have limited OpenWrt supportability (due to limited FLOSS driver availability for Broadcom chips). Consider this when chosing a device to buy, or when deciding to flash OpenWrt on your device because it is listed as supported. See broadcom_wifi for details.

Usage

  • IMPORTANT : Edit this page only via the LEFT edit button below the box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / …)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum …)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.

Dataentry

Device Type:
Single Board Computer
Brand:
Raspberry Pi Foundation
Model:
Raspberry Pi Zero W
Availability:
Available 2018
Where available:
commonly avaliable
Supported Since Commit:
https://git.lede-project.org/?p=source.git;a=commit;h=6debeaab45a08d52cc018b1e5bc69924d9b41d6d
Supported Current Rel:
18.06.1
Target:
brcm2708
Subtarget:
bcm2708
Package architecture:
arm_arm1176jzf-s_vfp
Bootloader:
¿
CPU:
Broadcom BCM2835
CPU Cores:
1
CPU MHz:
1000
Flash MB:
microSD
RAM MB:
512
Ethernet 100M ports:
-
Ethernet Gbit ports:
-
Switch:
-
VLAN:
¿
Modem:
-
WLAN Hardware:
Broadcom BCM43143
WLAN 2.4GHz:
b/g/n
WLAN 5.0GHz:
-
WLAN driver:
brcmfmac
Detachable Antennas:
-
Bluetooth:
4.1
USB ports:
1x OTG, 1x µUSB (power)
SATA ports:
-
Video ports:
Composite, HDMI
Audio ports:
HDMI, other
Phone ports:
-
Comments AV ports:
MiniHDMI jack, composite video require solder a header on TV holes, audio output via HDMI or on-board I2S
Serial:
Yes
Serial connection parameters:
115200 / 8N1
JTAG:
¿
LED count:
-
Button count:
-
GPIOs:
more than 20
Power Supply:
5 VDC, 1A
Device Page:
raspberry_pi
WikiDevi URL:
https://wikidevi.com/wiki/RPF_Raspberry_Pi_Zero_W
OEM Device Homepage URL:
https://www.raspberrypi.org/products/pi-zero-wireless/
Firmware OpenWrt Upgrade URL:
http://downloads.openwrt.org/releases/18.06.1/targets/brcm2708/bcm2708/openwrt-18.06.1-brcm2708-bcm2708-rpi-ext4-sysupgrade.img.gz
Firmware OpenWrt snapshot Upgrade URL:
http://downloads.openwrt.org/snapshots/targets/brcm2708/bcm2708/openwrt-brcm2708-bcm2708-rpi-ext4-sysupgrade.img.gz
Installation method(s):
SD card, see devicepage
Recovery method(s):
SD card
Picture:
picture: genericrouter1.png

Conventions for dataentry values

General nomenclature

Details

Conventions per characteristic

Details

toh/hwdata/raspberry_pi_foundation/raspberry_pi_zero_w.txt · Last modified: 2018/09/09 09:59 by tmomas