User Tools

Site Tools


toh:hwdata:raspberry_pi_foundation:raspberry_pi_3_bplus

Techdata: Raspberry Pi Foundation Raspberry Pi 3 B+

Usage

  • IMPORTANT : Edit this page only via the LEFT edit button below the box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / …)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum …)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.

Dataentry

Device Type:
Single Board Computer
Brand:
Raspberry Pi Foundation
Model:
Raspberry Pi 3
Version:
B+
FCCID:
https://fcc.io/2ABCB/-RPI3BP
Availability:
Available 2018
Where available:
commonly available
Supported Since Commit:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=50b09196282eff24e19541003dfcb248d616006e
Supported Since Rel:
18.06.0
Supported Current Rel:
18.06.1
Unsupported Functions:
Country Code setting
Target:
brcm2708
Subtarget:
bcm2710
Package architecture:
arm_cortex-a53_neon-vfpv4
Bootloader:
¿
CPU:
Broadcom BCM2837B0
CPU Cores:
4
CPU MHz:
1400
Flash MB:
microSD
RAM MB:
1024
Ethernet 100M ports:
-
Ethernet Gbit ports:
1
Switch:
LAN7515
VLAN:
¿
Modem:
-
Comments network ports:
The on-board ethernet port can provide only up to 300Mbps
WLAN Hardware:
Cypress CYW43455
WLAN 2.4GHz:
b/g/n
WLAN 5.0GHz:
a/n/ac
WLAN driver:
brcmfmac
Detachable Antennas:
-
Bluetooth:
4.2
USB ports:
4x 2.0, 1x µUSB (power)
SATA ports:
-
Video ports:
Composite, HDMI, Camera
Audio ports:
Headphone jack, HDMI
Phone ports:
-
Comments AV ports:
Composite audio port is integrated on 3.5mm audio jack
Serial:
Yes
Serial connection parameters:
115200 / 8N1
JTAG:
Yes
LED count:
1
Button count:
-
GPIOs:
more than 20
Power Supply:
5 VDC, 2.5 A
Device Page:
raspberry_pi
OWrt Forum Topic URL:
https://forum.openwrt.org/t/18-06-on-raspberry-pi-3-b/18670/10
WikiDevi URL:
https://wikidevi.com/wiki/RPF_Raspberry_Pi_3_Model_B%2B
OEM Device Homepage URL:
https://www.raspberrypi.org/products/raspberry-pi-3-model-b-plus/
Firmware OEM Stock URL:
https://www.raspberrypi.org/downloads/
Firmware OpenWrt Install URL:
https://downloads.openwrt.org/releases/18.06.1/targets/brcm2708/bcm2710/
Firmware OpenWrt Upgrade URL:
https://downloads.openwrt.org/releases/18.06.1/targets/brcm2708/bcm2710/
Firmware OpenWrt snapshot Install URL:
https://downloads.openwrt.org/releases/18.06.0/targets/brcm2708/bcm2710/
Firmware OpenWrt snapshot Upgrade URL:
https://downloads.openwrt.org/releases/18.06.0/targets/brcm2708/bcm2710/
Installation method(s):
SD card, see devicepage
Comment installation:
Use an existing computer to flash disk image to MicroSD card
Recovery method(s):
SD card
Comment recovery:
Use an existing computer to flash disk image to MicroSD card
Picture:
picture: genericrouter1.png
Comments:
The bootloader is an image on MicroSD Card (the data partition can be resized to provide more storage), you may need to boot up Raspbian (released in or after April 2018) and set up WiFi country-code first before install OpenWrt

Conventions for dataentry values

General nomenclature

Details

Conventions per characteristic

Details

toh/hwdata/raspberry_pi_foundation/raspberry_pi_3_bplus.txt · Last modified: 2018/09/03 16:49 by tmomas