Techdata: NixCore X1

This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version onto it! See 4/32 warning for details.

1) This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation.
This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now.

2) OpenWrt support for this device has ended in 2022.
19.07.10 was the last official build for 4/32 devices.

  • IMPORTANT : Edit this page only via the LEFT edit button below the dataentry box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / ...)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum ...)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.
Device Type:
Single Board Computer
Brand:
NixCore
Model:
X1
Availability:
Available 2018
Where available:
nixcores.com
Supported Since Commit:
https://git.lede-project.org/?p=source.git;a=commit;h=cf8c77be6becf3c5e40e19e9c4ab0d0abdfb9291
Supported Since Rel:
17.01.0
Supported Current Rel:
18.06.4
Gluon support:
unknown
Target:
ramips
Subtarget:
rt305x
Package architecture:
mipsel_24kc
Bootloader:
U-Boot
CPU:
Ralink RT5350
CPU Cores:
1
CPU MHz:
360
Flash MB:
8, 16
RAM MB:
32
Ethernet 100M ports:
1
Ethernet 1Gbit ports:
-
Ethernet 2.5Gbit ports:
¿
Ethernet 5Gbit ports:
¿
Ethernet 10Gbit ports:
¿
SFP ports:
¿
SFP+ ports:
¿
Switch:
-
VLAN:
¿
Modem:
-
WLAN Hardware:
Ralink RT5350
WLAN 2.4GHz:
b/g/n
WLAN 5.0GHz:
-
WLAN driver:
unknown
Detachable Antennas:
1
Bluetooth:
-
miniPCI ports:
¿
USB ports:
1x 2.0
SATA ports:
-
Video ports:
-
Audio ports:
-
Phone ports:
-
Serial:
Yes
Serial connection parameters:
115200 / 8N1
Serial connection voltage:
¿
JTAG:
Yes
LED count:
-
Button count:
-
GPIOs:
more than 20
Power Supply:
3.6 VDC, max. 3W
OpenVPN performance:
¿
Wireguard performance:
¿
OEM Device Homepage URL:
http://nixcores.com/products/nixcore-x1/
Firmware OEM Stock URL:
http://nixcores.com/products/nixcore-x1/
Firmware OpenWrt Upgrade URL:
https://downloads.openwrt.org/releases/18.06.4/targets/ramips/rt305x/openwrt-18.06.4-ramips-rt305x-nixcore-x1-8M-squashfs-sysupgrade.bin, https://downloads.openwrt.org/releases/18.06.4/targets/ramips/rt305x/openwrt-18.06.4-ramips-rt305x-nixcore-x1-16M-squashfs-sysupgrade.bin
Firmware OpenWrt snapshot Upgrade URL:
https://downloads.openwrt.org/snapshots/targets/ramips/rt305x/openwrt-ramips-rt305x-nixcore_x1-8m-squashfs-sysupgrade.bin, https://downloads.openwrt.org/snapshots/targets/ramips/rt305x/openwrt-ramips-rt305x-nixcore_x1-16m-squashfs-sysupgrade.bin
Installation method(s):
U-Boot TFTP + serial recovery
Recovery method(s):
U-Boot TFTP + serial recovery
Picture:
picture: genericrouter1.png
Comments:
Vendor firmware is based on OpenWrt/LEDE.
General nomenclature

Details

Conventions per characteristic

Details

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2023/03/06 19:47
  • by 127.0.0.1