Techdata: NETGEAR WAC510

The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile.

Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI

  • IMPORTANT : Edit this page only via the LEFT edit button below the dataentry box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / …)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum …)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.
Device Type:
WiFi AP
Brand:
NETGEAR
Model:
WAC510
FCCID:
https://fcc.io/PY3/16200355
Where available:
amazon.com
Supported Since Commit:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=b126d9c3a3d3c8fe0937bcdfffabe8df941d2c06
Supported Current Rel:
snapshot
Gluon support:
unknown
Target:
ipq40xx
Subtarget:
generic
Package architecture:
arm_cortex-a7_neon-vfpv4
Bootloader:
U-Boot
CPU:
IPQ4018
CPU Cores:
4
CPU MHz:
710
Flash MB:
128
RAM MB:
256
Ethernet 100M ports:
-
Ethernet Gbit ports:
2
Switch:
-
VLAN:
Yes
Modem:
-
Comments network ports:
LAN, WAN
WLAN Hardware:
IPQ4018
WLAN 2.4GHz:
b/g/n
WLAN 5.0GHz:
a/n/ac
WLAN Comments:
2x2:2 MIMO
WLAN driver:
ath10k-ct
Detachable Antennas:
-
Bluetooth:
-
miniPCI ports:
-
USB ports:
-
SATA ports:
-
Video ports:
-
Audio ports:
-
Phone ports:
-
Serial:
Yes
Serial connection parameters:
115200 / 8N1
JTAG:
¿
LED count:
6
Button count:
1
GPIOs:
-
Power Supply:
(Optional) Barrel 12 Volt DC 2.5 Amp, WAN port active IEEE 802.3af/at PoE in
OpenVPN performance:
¿
Wireguard performance:
¿
Device Page:
wac510
OWrt Forum Topic URL:
https://forum.openwrt.org/t/status-of-wac510-port/59867
WikiDevi URL:
https://wikidevi.wi-cat.ru/Netgear_WAC510
WikiDevi ID:
Netgear_WAC510
OEM Device Homepage URL:
https://www.netgear.com/business/wifi/access-points/wac510
Firmware OEM Stock URL:
https://www.netgear.com/support/product/wac510.aspx#download
Firmware OpenWrt Install URL:
http://¿
Firmware OpenWrt Upgrade URL:
http://¿
Firmware OpenWrt snapshot Install URL:
http://downloads.openwrt.org/snapshots/targets/ipq40xx/generic/openwrt-ipq40xx-generic-netgear_wac510-squashfs-nand-factory.tar
Firmware OpenWrt snapshot Upgrade URL:
http://downloads.openwrt.org/snapshots/targets/ipq40xx/generic/openwrt-ipq40xx-generic-netgear_wac510-squashfs-nand-sysupgrade.bin
Installation method(s):
GUI OEM, U-Boot TFTP + serial recovery, see devicepage, see git-commit
Recovery method(s):
U-Boot TFTP + serial recovery, see devicepage, see git-commit
Picture:
picture: wac510_left_web_main_zoom_tcm148-81900.png
Comments:
No distinct JTAG header but likely group of test points near CPU
General nomenclature

Details

Conventions per characteristic

Details

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
  • Last modified: 2021/06/12 17:54
  • by ziswiler