User Tools

Site Tools


toh:hwdata:netgear:netgear_r6230

Techdata: Netgear R6230

Usage

  • IMPORTANT : Edit this page only via the LEFT edit button below the box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / …)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum …)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.

Dataentry

Device Type:
WiFi Router
Brand:
Netgear
Model:
R6230
FCCID:
https://fcc.io/PY3/14200274
Availability:
Available 2019
Where available:
amazon.com
Supported Since Commit:
https://git.lede-project.org/?p=source.git;a=commit;h=38bee61dab029a7608088f64da71c19cfc8cf267
Supported Since Rel:
18.06.0
Supported Current Rel:
18.06.2
Target:
ramips
Subtarget:
mt7621
Package architecture:
mipsel_24kc
Bootloader:
U-Boot
CPU:
MediaTek MT7621ST
CPU Cores:
1
CPU MHz:
880
Flash MB:
128
RAM MB:
128
Ethernet 100M ports:
¿
Ethernet Gbit ports:
5
Switch:
MediaTek MT7621ST
VLAN:
Yes
Modem:
-
WLAN Hardware:
MediaTek MT7603EN, MediaTek MT7612EN
WLAN 2.4GHz:
b/g/n
WLAN 5.0GHz:
a/n/ac
WLAN Comments:
MIMO 2x2
WLAN driver:
unknown
Detachable Antennas:
¿
Bluetooth:
¿
USB ports:
1x 2.0
SATA ports:
¿
Video ports:
¿
Audio ports:
¿
Phone ports:
¿
Serial:
Yes
Serial connection parameters:
57600 / 8N1
JTAG:
¿
LED count:
9
Button count:
3
GPIOs:
¿
Power Supply:
12 VDC, 1.5 A
Device Page:
netgear_r6220
WikiDevi URL:
https://wikidevi.com/wiki/Netgear_R6230
OEM Device Homepage URL:
http://¿
Firmware OEM Stock URL:
http://¿
Firmware OpenWrt Install URL:
http://downloads.openwrt.org/releases/18.06.2/targets/ramips/mt7621/openwrt-18.06.2-ramips-mt7621-r6220-squashfs-kernel.bin, http://downloads.openwrt.org/releases/18.06.2/targets/ramips/mt7621/openwrt-18.06.2-ramips-mt7621-r6220-squashfs-rootfs.bin
Firmware OpenWrt Upgrade URL:
http://downloads.openwrt.org/releases/18.06.2/targets/ramips/mt7621/openwrt-18.06.2-ramips-mt7621-r6220-squashfs-sysupgrade.tar
Firmware OpenWrt snapshot Install URL:
http://¿
Firmware OpenWrt snapshot Upgrade URL:
http://¿
Installation method(s):
Telnet, see devicepage, see git-commit
Comment installation:
LuCI Web Interface/uhttpd (also ssh) may NOT be enabled across power cycling after installation, or hard reset. If not - can test by power cycling first, a hard reset brings it back - then ssh, enter '/etc/init.d/uhttpd enable' on the command line, then 'reboot' or '/etc/init.d/uhttpd start' before power cycling or backing up a configuration. Restoring a configuration from after this had been applied also solves the problem.
Recovery method(s):
see devicepage
Picture:
picture: r6230.png

Conventions for dataentry values

General nomenclature

Details

Conventions per characteristic

Details

toh/hwdata/netgear/netgear_r6230.txt · Last modified: 2019/06/11 12:56 by gochu