Techdata: Netcraze NC-1012

  • IMPORTANT : Edit this page only via the LEFT edit button below the dataentry box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / ...)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum ...)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.
Device Type:
WiFi Router
Brand:
Netcraze
Model:
NC-1012 (Giga)
Supported Since Commit:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=492a0ff6b13aead1dc2a54def9160cc38550c032
Supported Current Rel:
snapshot
Unsupported Functions:
Copper side of the combo port (lan4 RJ45) until a pending kernel fix is merged
Gluon support:
unknown
Target:
mediatek
Subtarget:
filogic
Package architecture:
aarch64_cortex-a53
Bootloader:
U-Boot
CPU:
MediaTek MT7981B
CPU Cores:
2
CPU MHz:
1300
Flash MB:
256NAND
RAM MB:
512
Ethernet 100M ports:
-
Ethernet 1Gbit ports:
4
Ethernet 2.5Gbit ports:
1
Ethernet 5Gbit ports:
-
Ethernet 10Gbit ports:
-
SFP ports:
1
SFP+ ports:
-
Switch:
MediaTek MT7531
VLAN:
Yes
Modem:
-
Comments network ports:
lan4 is a combo port: RJ45 through an Airoha EN8811H 2.5G PHY or an SFP cage, one at a time, chosen at boot by whether a module is present
WLAN Hardware:
MediaTek MT7981B
WLAN 2.4GHz:
b/g/n/ax
WLAN 5.0GHz:
a/n/ac/ax
WLAN 6.0GHz:
-
WLAN 60.0GHz:
-
WLAN Comments:
2T2R on both bands
WLAN driver:
mt76
Detachable Antennas:
-
Bluetooth:
-
USB ports:
1x 2.0, 1x 3.0
SATA ports:
-
Comments USB SATA ports:
One USB 3.0 and one USB 2.0 port. USB 2.0 goes through a GL850G hub, each port has its own power switch. SuperSpeed under OpenWrt is not tested yet
Video ports:
-
Audio ports:
-
Phone ports:
-
Serial:
Yes
Serial connection parameters:
115200 / 8N1
Serial connection voltage:
¿
JTAG:
¿
LED count:
6
Button count:
4
GPIOs:
¿
Power Supply:
12 VDC, 2.5 A, center positive
Outdoor:
No
OpenVPN performance:
¿
Wireguard performance:
¿
Device Page:
kn-1012
Firmware OEM Stock URL:
https://osvault.netcraze.ru/NC-1012/
Firmware OpenWrt snapshot Install URL:
https://downloads.openwrt.org/snapshots/targets/mediatek/filogic/openwrt-mediatek-filogic-netcraze_nc-1012-squashfs-factory.bin
Firmware OpenWrt snapshot Upgrade URL:
https://downloads.openwrt.org/snapshots/targets/mediatek/filogic/openwrt-mediatek-filogic-netcraze_nc-1012-squashfs-sysupgrade.bin
Installation method(s):
see git-commit
Comment installation:
Vendor TFTP recovery: server 192.168.1.2 on a LAN port, image renamed to NC-1012_recovery.bin, hold Reset at power-on
Recovery method(s):
see git-commit
Comment recovery:
Same TFTP recovery with the .bin from the official recovery package
Picture:
picture: genericrouter1.png
Comments:
Rebrand of the Keenetic KN-1012 with identical hardware; images are separate because the stock recovery checks the brand
General nomenclature

Details

Conventions per characteristic

Details

  • Last modified: 2026/09/28 00:08
  • by lexfrei