Techdata: Linksys MR9000

  • IMPORTANT : Edit this page only via the LEFT edit button below the dataentry box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / ...)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum ...)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.
Device Type:
WiFi Router
Brand:
Linksys
Model:
MR9000
FCCID:
https://fcc.report/FCC-ID/Q87-03433
Availability:
Available 2026
Where available:
amazon.com
Supported Since Commit:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=9f7d9aa16711ee655f6faaa7b2f4f23dc5c4ab4e
Supported Current Rel:
25.12.5
Unsupported Functions:
Bluetooth
Gluon support:
unknown
Target:
ipq40xx
Subtarget:
generic
Package architecture:
arm_cortex-a7_neon-vfpv4
Bootloader:
U-Boot
CPU:
Qualcomm Atheros IPQ4019
CPU Cores:
4
CPU MHz:
717
Flash MB:
256
RAM MB:
512
Ethernet 100M ports:
-
Ethernet 1Gbit ports:
5
Ethernet 2.5Gbit ports:
-
Ethernet 5Gbit ports:
-
Ethernet 10Gbit ports:
-
SFP ports:
-
SFP+ ports:
-
Switch:
Qualcomm Atheros QCA8075
VLAN:
Yes
Modem:
-
WLAN Hardware:
Qualcomm Atheros IPQ4019, Qualcomm Atheros QCA9984
WLAN 2.4GHz:
b/g/n
WLAN 5.0GHz:
a/n/ac
WLAN 6.0GHz:
-
WLAN 60.0GHz:
-
WLAN Comments:
2x2 in 2.4 Ghz & 5Ghz band; 4x4 in the third 5Ghz band
WLAN driver:
ath10k, ath10k-ct
Detachable Antennas:
-
Bluetooth:
4.0
miniPCI ports:
-
USB ports:
1x 3.0
SATA ports:
-
Comments USB SATA ports:
-
Video ports:
-
Audio ports:
-
Phone ports:
-
Comments AV ports:
-
Serial:
Yes
Serial connection parameters:
115200 / 8N1
Serial connection voltage:
3.3
JTAG:
¿
LED count:
¿
Button count:
¿
GPIOs:
¿
Power Supply:
12 VDC, 2A via barrel
Outdoor:
No
OpenVPN performance:
-
Wireguard performance:
-
Device Page:
mr9000
OWrt Forum Topic URL:
https://forum.openwrt.org/t/support-for-the-linksys-mr9000/54377/
WikiDevi URL:
https://wikidevi.wi-cat.ru/Linksys_MR9000
WikiDevi ID:
Linksys_MR9000
OEM Device Homepage URL:
https://support.linksys.com/kb/article/583-en/
Firmware OEM Stock URL:
https://support.linksys.com/kb/article/583-en/
Firmware OpenWrt Install URL:
https://downloads.openwrt.org/releases/25.12.5/targets/ipq40xx/generic/openwrt-25.12.5-ipq40xx-generic-linksys_mr9000-squashfs-factory.bin
Firmware OpenWrt Upgrade URL:
https://downloads.openwrt.org/releases/25.12.5/targets/ipq40xx/generic/openwrt-25.12.5-ipq40xx-generic-linksys_mr9000-squashfs-sysupgrade.bin
Firmware OpenWrt snapshot Install URL:
https://downloads.openwrt.org/snapshots//targets/ipq40xx/generic/openwrt-ipq40xx-generic-linksys_mr9000-squashfs-factory.bin
Firmware OpenWrt snapshot Upgrade URL:
https://downloads.openwrt.org/snapshots//targets/ipq40xx/generic/openwrt-ipq40xx-generic-linksys_mr9000-squashfs-sysupgrade.bin
Installation method(s):
U-Boot TFTP + serial recovery, see devicepage, see git-commit
Comment installation:
Do NOT flash factory.bin image directly! Must first change kernel partition size via Serial Console -or- Intermediate Firmware. See Device Page section for more information.
Recovery method(s):
U-Boot TFTP + serial recovery, see devicepage, see git-commit
Picture:
picture: linksys_mr9000.jpg
Comments:
Main snapshot and 25.12+ need a kernel partition variable change before installation. Read doc in Device Page section.
General nomenclature

Details

Conventions per characteristic

Details

  • Last modified: 2026/07/01 03:17
  • by wfgriffin88