User Tools

Site Tools


toh:hwdata:linksys:linksys_ea6350_v3

Techdata: Linksys EA6350 v3

The development branch can contain experimental code that is under active development and should not be used for production environments. Snapshot images may support additional hardware; however, it is experimental, considered unstable, and sometimes won't compile.

Prebuilt snapshot images do not come with any web interface or GUI. You will need to be comfortable using a command line and remote shell to install one yourself → How to install LuCI

Usage

  • IMPORTANT : Edit this page only via the LEFT edit button below the box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / …)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum …)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.

Dataentry

Device Type:
WiFi Router
Brand:
Linksys
Model:
EA6350
Version:
v3 (civic)
FCCID:
https://fcc.io/Q87/-EA6350V3
Availability:
Available 2019
Where available:
amazon.com, amazon.de
Supported Since Commit:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=a873b292840848b67addb5be0c762d292bde33a1
Supported Current Rel:
snapshot
Target:
ipq40xx
Subtarget:
generic
Package architecture:
arm_cortex-a7_neon-vfpv4
Bootloader:
U-Boot
CPU:
Qualcomm Atheros IPQ4018
CPU Cores:
4
CPU MHz:
710
Flash MB:
128NAND
RAM MB:
256
Ethernet 100M ports:
-
Ethernet Gbit ports:
5
Switch:
Qualcomm Atheros QCA8075
VLAN:
Yes
Modem:
-
WLAN Hardware:
Qualcomm Atheros IPQ4018
WLAN 2.4GHz:
b/g/n
WLAN 5.0GHz:
a/n/ac
WLAN Comments:
2x2 MU-MIMO
WLAN driver:
ath10k
Detachable Antennas:
-
Bluetooth:
-
USB ports:
1x 3.0
SATA ports:
-
Video ports:
-
Audio ports:
-
Phone ports:
-
Serial:
Yes
Serial connection parameters:
115200 / 8N1
JTAG:
¿
LED count:
1
Button count:
2
GPIOs:
-
Power Supply:
12 VDC, 2.0 A
Device Page:
linksys_ea6350_v3
OWrt Forum Topic URL:
http://forum.openwrt.org/t/add-support-for-linksys-ea6350-v3/18907
WikiDevi URL:
https://wikidevi.com/wiki/Linksys_EA6350_v3
OEM Device Homepage URL:
https://www.linksys.com/p/P-EA6350/
Firmware OEM Stock URL:
https://www.linksys.com/gb/support-article?articleNum=148481
Firmware OpenWrt snapshot Install URL:
http://downloads.openwrt.org/snapshots/targets/ipq40xx/generic/openwrt-ipq40xx-generic-linksys_ea6350v3-squashfs-factory.bin
Firmware OpenWrt snapshot Upgrade URL:
http://downloads.openwrt.org/snapshots/targets/ipq40xx/generic/openwrt-ipq40xx-generic-linksys_ea6350v3-squashfs-sysupgrade.bin
Installation method(s):
GUI OEM, see git-commit
Recovery method(s):
U-Boot TFTP recovery, see git-commit
Comment recovery:
the "mtd write" method works
Picture:
picture: ea6350_v3.jpg
Comments:
For switching back to the original firmware, you can use the TFTP + Serial method or use the generic "MTD write" method.

Conventions for dataentry values

General nomenclature

Details

Conventions per characteristic

Details

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
toh/hwdata/linksys/linksys_ea6350_v3.txt · Last modified: 2019/09/07 05:51 by tmomas