User Tools

Site Tools


toh:hwdata:intenso:intenso_memory2move

Techdata: Intenso Memory 2 Move

This device is NOT RECOMMENDED for future use with OpenWrt due to low flash/ram.
DO NOT BUY DEVICES WITH 4MB FLASH / 32MB RAM if you intend to flash an up-to-date and secure OpenWrt version (18.06 or later) onto it! See 4/32 warning for details.

1) This device does not have sufficient resources (flash and/or RAM) to provide secure and reliable operation.
This means that even setting a password or changing simple network settings might not be possible any more, rendering the device effectively useless. See OpenWrt on 4/32 devices what you can do now.

2) OpenWrt support for this device will end after 2019.
19.07 will be the last official build for 4/32 devices. After 19.07, no further OpenWrt images will be built for 4/32 devices. See OpenWrt on 4/32 devices what you can do now.

Usage

  • IMPORTANT : Edit this page only via the LEFT edit button below the box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / …)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum …)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.

Dataentry

Device Type:
NAS
Brand:
Intenso
Model:
Memory 2 Move
Availability:
Discontinued
Supported Since Commit:
https://git.lede-project.org/?p=source.git;a=commit;h=88df2bd2ff5aa7b31ce9aaeda25c60e8a9b980b2
Supported Since Rel:
15.05
Supported Current Rel:
18.06.4
Target:
ramips
Subtarget:
rt305x
Package architecture:
mipsel_24kc
Bootloader:
U-Boot
CPU:
Ralink RT5350
CPU Cores:
1
CPU MHz:
360
Flash MB:
8
RAM MB:
32
Ethernet 100M ports:
1
Ethernet Gbit ports:
-
Switch:
-
VLAN:
No
Modem:
-
WLAN Hardware:
Ralink RT5350
WLAN 2.4GHz:
b/g/n
WLAN 5.0GHz:
-
WLAN driver:
unknown
Detachable Antennas:
-
Bluetooth:
-
USB ports:
1x 3.0
SATA ports:
-
Video ports:
-
Audio ports:
-
Phone ports:
-
Serial:
Yes
Serial connection parameters:
57600 / 8N1
JTAG:
¿
GPIOs:
-
Power Supply:
5 VDC (µUSB), 3000mAh battery
Device Page:
m2m
WikiDevi URL:
https://wikidevi.com/wiki/Intenso_Memory_2_Move_500GB_Black
Firmware OpenWrt Upgrade URL:
http://downloads.openwrt.org/releases/18.06.4/targets/ramips/rt305x/openwrt-18.06.4-ramips-rt305x-m2m-squashfs-sysupgrade.bin
Firmware OpenWrt snapshot Upgrade URL:
http://downloads.openwrt.org/snapshots/targets/ramips/rt305x/openwrt-ramips-rt305x-intenso_memory2move-squashfs-sysupgrade.bin
Installation method(s):
U-Boot TFTP + serial recovery, see devicepage
Recovery method(s):
U-Boot TFTP + serial recovery
Picture:
picture: genericrouter1.png

Conventions for dataentry values

General nomenclature

Details

Conventions per characteristic

Details

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
toh/hwdata/intenso/intenso_memory2move.txt · Last modified: 2019/07/27 15:49 by tmomas